Attachment 293681 Details for Bug 271801 – newer dmesg output from removing/reloading firewire kernel modules

newer dmesg output from removing/reloading firewire kernel modules

dmesg2.txt (text/plain), 36.92 KB, created by Ed Lally on 2008-02-01 02:23:33 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Ed Lally

Created: 2008-02-01 02:23:33 UTC

Size: 36.92 KB

patch

obsolete

>Linux version 2.6.23.14-107.fc8 (mockbuild@xenbuilder1.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Mon Jan 14 22:07:11 EST 2008
>Command line: ro root=/dev/vgraid/raidroot quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000dfee0000 (usable)
> BIOS-e820: 00000000dfee0000 - 00000000dfee3000 (ACPI NVS)
> BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data)
> BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
>Entering add_active_range(0, 0, 158) 0 entries of 3200 used
>Entering add_active_range(0, 256, 917216) 1 entries of 3200 used
>Entering add_active_range(0, 1048576, 1179648) 2 entries of 3200 used
>end_pfn_map = 1179648
>DMI 2.4 present.
>ACPI: RSDP 000F6D90, 0014 (r0 GBT   )
>ACPI: RSDT DFEE3040, 003C (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
>ACPI: FACP DFEE30C0, 0074 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
>ACPI: DSDT DFEE3180, 4A88 (r1 GBT    GBTUACPI     1000 MSFT  100000C)
>ACPI: FACS DFEE0000, 0040
>ACPI: HPET DFEE7D80, 0038 (r1 GBT    GBTUACPI 42302E31 GBTU       98)
>ACPI: MCFG DFEE7E00, 003C (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
>ACPI: APIC DFEE7C80, 0084 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
>ACPI: SSDT DFEE7E80, 015C (r1  PmRef  Cpu0Ist     3000 INTL 20040311)
>ACPI: SSDT DFEE8310, 0275 (r1  PmRef    CpuPm     3000 INTL 20040311)
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000120000000
>Entering add_active_range(0, 0, 158) 0 entries of 3200 used
>Entering add_active_range(0, 256, 917216) 1 entries of 3200 used
>Entering add_active_range(0, 1048576, 1179648) 2 entries of 3200 used
>Bootmem setup node 0 0000000000000000-0000000120000000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1179648
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0:        0 ->      158
>    0:      256 ->   917216
>    0:  1048576 ->  1179648
>On node 0 totalpages: 1048190
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1320 pages reserved
>  DMA zone: 2622 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 898840 pages, LIFO batch:31
>  Normal zone: 1792 pages used for memmap
>  Normal zone: 129280 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>swsusp: Registered nosave memory region: 00000000dfee0000 - 00000000dfee3000
>swsusp: Registered nosave memory region: 00000000dfee3000 - 00000000dfef0000
>swsusp: Registered nosave memory region: 00000000dfef0000 - 00000000dff00000
>swsusp: Registered nosave memory region: 00000000dff00000 - 00000000f0000000
>swsusp: Registered nosave memory region: 00000000f0000000 - 00000000f4000000
>swsusp: Registered nosave memory region: 00000000f4000000 - 00000000fec00000
>swsusp: Registered nosave memory region: 00000000fec00000 - 0000000100000000
>Allocating PCI resources starting at e0000000 (gap: dff00000:10100000)
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>PERCPU: Allocating 41688 bytes of per cpu data
>Built 1 zonelists in Node order.  Total pages: 1030742
>Policy zone: Normal
>Kernel command line: ro root=/dev/vgraid/raidroot quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>hpet clockevent registered
>TSC calibrated against HPET
>time.c: Detected 2666.664 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing software IO TLB between 0x4863000 - 0x8863000
>Memory: 4059636k/4718592k available (2443k kernel code, 133124k reserved, 1380k data, 324k init)
>SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
>Calibrating delay using timer specific routine.. 5336.15 BogoMIPS (lpj=2668075)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 0/0 -> Node 0
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>APIC timer calibration result 20833329
>Detected 20.833 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5333.28 BogoMIPS (lpj=2666644)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>Intel(R) Core(TM)2 Duo CPU     E6750  @ 2.66GHz stepping 0b
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=2080 bytes
>Time: 20:50:13  Date: 01/31/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 64-bit timers, 14318180 Hz
>Time: tsc clocksource has been installed.
>pnp: 00:08: ioport range 0x400-0x4bf has been reserved
>pnp: 00:09: iomem range 0xf0000000-0xf3ffffff could not be reserved
>pnp: 00:0a: iomem range 0xd5000-0xd7fff has been reserved
>pnp: 00:0a: iomem range 0xf0000-0xf7fff could not be reserved
>pnp: 00:0a: iomem range 0xf8000-0xfbfff could not be reserved
>pnp: 00:0a: iomem range 0xfc000-0xfffff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: b000-bfff
>  MEM window: f4000000-f7ffffff
>  PREFETCH window: e0000000-efffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: a000-afff
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.4
>  IO window: c000-cfff
>  MEM window: fa000000-fa0fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.5
>  IO window: d000-dfff
>  MEM window: f8000000-f9ffffff
>  PREFETCH window: fa300000-fa3fffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: fa100000-fa1fffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 524288 (order: 11, 12582912 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 4134k freed
>audit: initializing netlink socket (disabled)
>audit(1201812613.486:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 9D330118D0496200
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.5:pcie00]
>Allocate Port Service[0000:00:1c.5:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT DFEE8280, 0087 (r1  PmRef  Cpu1Ist     3000 INTL 20040311)
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not present [20070126]
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>  Magic number: 8:209:853
>Freeing unused kernel memory: 324k freed
>Write protecting the kernel read-only data: 1020k
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfa205000
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfa204000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e100
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 1-2: new high speed USB device using ehci_hcd and address 2
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e200
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.2 to 64
>uhci_hcd 0000:00:1a.2: UHCI Host Controller
>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e000
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 1-2: configuration #1 chosen from 1 choice
>hub 1-2:1.0: USB hub found
>hub 1-2:1.0: 7 ports detected
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500
>usb usb8: configuration #1 chosen from 1 choice
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 2 ports detected
>md: raid1 personality registered for level 1
>xor: automatically using best checksumming function: generic_sse
>   generic_sse:  9900.000 MB/sec
>xor: using function: generic_sse (9900.000 MB/sec)
>async_tx: api initialized (async)
>raid6: int64x1   2273 MB/s
>raid6: int64x2   3042 MB/s
>raid6: int64x4   2566 MB/s
>raid6: int64x8   2074 MB/s
>raid6: sse2x1    4683 MB/s
>raid6: sse2x2    5183 MB/s
>raid6: sse2x4    8089 MB/s
>raid6: using algorithm sse2x4 (8089 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>usb 1-2.2: new full speed USB device using ehci_hcd and address 3
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ahci 0000:00:1f.2: version 2.3
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>usb 1-2.2: configuration #1 chosen from 1 choice
>usb 1-2.3: new low speed USB device using ehci_hcd and address 4
>usb 1-2.3: configuration #1 chosen from 1 choice
>hiddev96: USB HID v1.00 Device [TRIPP LITE TRIPP LITE OMNIVS1000         ] on usb-0000:00:1a.7-2.3
>usb 1-2.5: new full speed USB device using ehci_hcd and address 5
>usb 1-2.5: configuration #1 chosen from 1 choice
>hub 1-2.5:1.0: USB hub found
>hub 1-2.5:1.0: 3 ports detected
>usb 1-2.7: new low speed USB device using ehci_hcd and address 6
>usb 1-2.7: device descriptor read/64, error -32
>ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part 
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 cmd 0xffffc2000143a100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2299
>ata2: SATA max UDMA/133 cmd 0xffffc2000143a180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2299
>ata3: SATA max UDMA/133 cmd 0xffffc2000143a200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2299
>ata4: SATA max UDMA/133 cmd 0xffffc2000143a280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2299
>ata5: SATA max UDMA/133 cmd 0xffffc2000143a300 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2299
>ata6: SATA max UDMA/133 cmd 0xffffc2000143a380 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2299
>usb 1-2.7: device descriptor read/64, error -32
>usb 1-2.7: new low speed USB device using ehci_hcd and address 7
>usb 1-2.7: device descriptor read/64, error -32
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: Host Protected Area detected:
>	current size: 976771055 sectors
>	native size: 976773168 sectors
>ata1.00: ATA-7: Maxtor 6H500F0, HA431DD0, max UDMA/133
>ata1.00: 976771055 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata1.00: Host Protected Area detected:
>	current size: 976771055 sectors
>	native size: 976773168 sectors
>ata1.00: configured for UDMA/133
>usb 1-2.7: device descriptor read/64, error -32
>usb 1-2.7: new low speed USB device using ehci_hcd and address 8
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2.00: ATA-7: Maxtor 6H500F0, HA431DD0, max UDMA/133
>ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata2.00: configured for UDMA/133
>usb 1-2.7: device not accepting address 8, error -32
>usb 1-2.7: new low speed USB device using ehci_hcd and address 9
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133
>ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata3.00: configured for UDMA/133
>usb 1-2.7: device not accepting address 9, error -32
>usb 7-2: new low speed USB device using uhci_hcd and address 2
>ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>usb 7-2: configuration #1 chosen from 1 choice
>ata4.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133
>ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>input: Logitech USB Receiver as /class/input/input1
>input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-2
>Fixing up Logitech keyboard report descriptor
>input: Logitech USB Receiver as /class/input/input2
>input,hiddev97: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2
>ata4.00: configured for UDMA/133
>usb 1-2.5.1: new full speed USB device using ehci_hcd and address 10
>usb 1-2.5.1: configuration #1 chosen from 1 choice
>ata5: SATA link down (SStatus 0 SControl 300)
>usb 1-2.5.2: new full speed USB device using ehci_hcd and address 11
>usb 1-2.5.2: configuration #1 chosen from 1 choice
>input: Broadcom Corp ANYCOM Bluetooth USB-250 UHE as /class/input/input3
>input: USB HID v1.11 Keyboard [Broadcom Corp ANYCOM Bluetooth USB-250 UHE] on usb-0000:00:1a.7-2.5.2
>ata6: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6H500F0   HA43 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 976771055 512-byte hardware sectors (500107 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 976771055 512-byte hardware sectors (500107 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: Direct-Access     ATA      Maxtor 6H500F0   HA43 PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 sdb3
>sd 1:0:0:0: [sdb] Attached SCSI disk
>scsi 2:0:0:0: Direct-Access     ATA      ST3500630AS      3.AA PQ: 0 ANSI: 5
>sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1
>sd 2:0:0:0: [sdc] Attached SCSI disk
>scsi 3:0:0:0: Direct-Access     ATA      ST3500630AS      3.AA PQ: 0 ANSI: 5
>sd 3:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB)
>sd 3:0:0:0: [sdd] Write Protect is off
>sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB)
>sd 3:0:0:0: [sdd] Write Protect is off
>sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdd:<6>usb 1-2.5.3: new full speed USB device using ehci_hcd and address 12
> sdd1
>sd 3:0:0:0: [sdd] Attached SCSI disk
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>usb 1-2.5.3: configuration #1 chosen from 1 choice
>input: Broadcom Corp ANYCOM Bluetooth USB-250 UHE as /class/input/input4
>input: USB HID v1.11 Mouse [Broadcom Corp ANYCOM Bluetooth USB-250 UHE] on usb-0000:00:1a.7-2.5.3
>ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
>ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>scsi6 : ahci
>scsi7 : ahci
>ata7: SATA max UDMA/133 cmd 0xffffc2000143c100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16
>ata8: SATA max UDMA/133 cmd 0xffffc2000143c180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16
>ata7: SATA link down (SStatus 0 SControl 300)
>ata8: SATA link down (SStatus 0 SControl 300)
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:03:00.1 to 64
>scsi8 : pata_jmicron
>scsi9 : pata_jmicron
>ata9: PATA max UDMA/100 cmd 0x000000000001c000 ctl 0x000000000001c102 bmdma 0x000000000001c400 irq 17
>ata10: PATA max UDMA/100 cmd 0x000000000001c200 ctl 0x000000000001c302 bmdma 0x000000000001c408 irq 17
>ata9.00: ATAPI: LITE-ON DVDRW SHM-165H6S, HS0E, max UDMA/66
>ata9.00: configured for UDMA/66
>scsi 8:0:0:0: CD-ROM            LITE-ON  DVDRW SHM-165H6S HS0E PQ: 0 ANSI: 5
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>md: md1 stopped.
>md: bind<sdb3>
>md: bind<sda3>
>raid1: raid set md1 active with 2 out of 2 mirrors
>md: md2 stopped.
>md: bind<sdd1>
>md: bind<sdc1>
>raid1: raid set md2 active with 2 out of 2 mirrors
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>security:  6 users, 11 roles, 2398 types, 114 bools, 1 sens, 1024 cats
>security:  67 classes, 216625 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-1, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1201812699.251:2): policy loaded auid=4294967295
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 8:0:0:0: Attached scsi CD-ROM sr0
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>sd 3:0:0:0: Attached scsi generic sg3 type 0
>sr 8:0:0:0: Attached scsi generic sg4 type 5
>input: Power Button (FF) as /class/input/input5
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input6
>ACPI: Power Button (CM) [PWRB]
>r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>eth0: RTL8168b/8111b at 0xffffc20001440000, 00:1a:4d:4e:77:ee, XID 38000000 IRQ 17
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: HCI USB driver ver 2.9
>usbcore: registered new interface driver hci_usb
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
>iTCO_wdt: No card detected
>ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
>nvidia: module license 'NVIDIA' taints kernel.
>parport_pc 00:07: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>NVRM: loading NVIDIA UNIX x86_64 Kernel Module  169.07  Thu Dec 13 18:34:01 PST 2007
>input: PC Speaker as /class/input/input7
>ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 20 (level, low) -> IRQ 20
>firewire_ohci: Added fw-ohci device 0000:05:00.0, OHCI version 1.10
>ACPI: PCI Interrupt 0000:05:06.0[A] -> GSI 18 (level, low) -> IRQ 18
>firewire_ohci: Added fw-ohci device 0000:05:06.0, OHCI version 1.10
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
>usbcore: registered new interface driver snd-usb-audio
>firewire_core: created new fw device fw0 (0 config rom retries, S800)
>md: md0 stopped.
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>firewire_core: created new fw device fw1 (0 config rom retries, S400)
>md: bind<sdb2>
>md: bind<sda2>
>raid1: raid set md0 active with 2 out of 2 mirrors
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-1, internal journal
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on md0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev md0, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-9, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-9, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-5, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-16, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-16, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-22, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-22, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-13, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-13, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-20, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-20, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-17, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-17, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-18, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-18, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-11, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-7, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-15, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-3, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-24, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-24, type ext3), uses xattr
>Adding 4194296k swap on /dev/mapper/vgraid-swap.  Priority:-1 extents:1 across:4194296k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>r8169: eth0: link up
>r8169: eth0: link up
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>it87: Found IT8718F chip at 0x290, revision 4
>it87: in3 is VCC (+5V)
>coretemp coretemp.0: Using undocumented features, absolute temperature might be wrong!
>coretemp coretemp.1: Using undocumented features, absolute temperature might be wrong!
>audit(1201830721.646:3): audit_pid=2648 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>usb 1-2.5.2: USB disconnect, address 11
>usb 1-2.5.3: USB disconnect, address 12
>eth0: no IPv6 routers present
>firewire_core: giving up on config rom for node id ffc0
>firewire_core: giving up on config rom for node id ffc1
>firewire_core: phy config: card 1, new root=ffc0, gap_count=5
>ACPI: PCI interrupt for device 0000:05:06.0 disabled
>firewire_ohci: Removed fw-ohci device.
>ACPI: PCI interrupt for device 0000:05:00.0 disabled
>firewire_ohci: Removed fw-ohci device.
>ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 20 (level, low) -> IRQ 20
>firewire_ohci: Added fw-ohci device 0000:05:00.0, OHCI version 1.10
>ACPI: PCI Interrupt 0000:05:06.0[A] -> GSI 18 (level, low) -> IRQ 18
>firewire_ohci: Added fw-ohci device 0000:05:06.0, OHCI version 1.10
>firewire_core: created new fw device fw0 (0 config rom retries, S800)
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>firewire_core: created new fw device fw1 (0 config rom retries, S400)
>firewire_core: phy config: card 1, new root=ffc1, gap_count=5
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>fuse init (API version 7.8)
>SELinux: initialized (dev sdb1, type fuseblk), uses genfs_contexts
>firewire_core: giving up on config rom for node id ffc0
>firewire_core: giving up on config rom for node id ffc0
>ACPI: PCI interrupt for device 0000:05:06.0 disabled
>firewire_ohci: Removed fw-ohci device.
>ACPI: PCI interrupt for device 0000:05:00.0 disabled
>firewire_ohci: Removed fw-ohci device.
>ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 20 (level, low) -> IRQ 20
>firewire_ohci: Added fw-ohci device 0000:05:00.0, OHCI version 1.10
>ACPI: PCI Interrupt 0000:05:06.0[A] -> GSI 18 (level, low) -> IRQ 18
>firewire_ohci: Added fw-ohci device 0000:05:06.0, OHCI version 1.10
>firewire_core: created new fw device fw0 (0 config rom retries, S800)
>firewire_core: created new fw device fw1 (0 config rom retries, S400)
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>firewire_core: created new fw device fw2 (0 config rom retries, S400)
>firewire_core: created new fw device fw3 (0 config rom retries, S400)
>firewire_core: phy config: card 1, new root=ffc1, gap_count=5
>scsi10 : SBP-2 IEEE-1394
>scsi11 : SBP-2 IEEE-1394
>firewire_sbp2: logged in to fw1.0 LUN 0000 (0 retries)
>scsi 10:0:0:0: CD-ROM            _NEC     DVD_RW ND-3500AG 2.08 PQ: 0 ANSI: 0
>sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>sr 10:0:0:0: Attached scsi CD-ROM sr1
>sr 10:0:0:0: Attached scsi generic sg5 type 5
>firewire_sbp2: logged in to fw3.0 LUN 0000 (0 retries)
>scsi 11:0:0:0: Direct-Access-RBC WDC WD16 00JB-00GVA0      08.0 PQ: 0 ANSI: 4
>sd 11:0:0:0: [sde] 312581808 512-byte hardware sectors (160042 MB)
>sd 11:0:0:0: [sde] Write Protect is off
>sd 11:0:0:0: [sde] Mode Sense: 11 00 00 00
>sd 11:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 11:0:0:0: [sde] 312581808 512-byte hardware sectors (160042 MB)
>sd 11:0:0:0: [sde] Write Protect is off
>sd 11:0:0:0: [sde] Mode Sense: 11 00 00 00
>sd 11:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sde: sde1 sde2 sde3 < sde5 sde6 >
>sd 11:0:0:0: [sde] Attached SCSI disk
>sd 11:0:0:0: Attached scsi generic sg6 type 14
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sde2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sde2, type ext3), uses xattr
>SELinux: initialized (dev sde6, type fuseblk), uses genfs_contexts
>SELinux: initialized (dev sde1, type vfat), uses genfs_contexts
>FAT: Filesystem panic (dev sde1)
>    fat_get_cluster: invalid cluster chain (i_pos 0)
>    File system has been set read-only
>FAT: Filesystem panic (dev sde1)
>    fat_get_cluster: invalid cluster chain (i_pos 0)
>SELinux: initialized (dev sde5, type fuseblk), uses genfs_contexts

Actions: View

Attachments on bug 271801: 183541 | 201251 | 218561 | 218571 | 293681 | 293682 | 293720 | 293810