Attachment 293817 Details for Bug 431340 – dmesg output

dmesg output

dmesg.txt (text/plain), 23.07 KB, created by Pat Kane on 2008-02-03 02:37:44 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Pat Kane

Created: 2008-02-03 02:37:44 UTC

Size: 23.07 KB

patch

obsolete

>Linux version 2.6.23.14-107.fc8 (mockbuild@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Mon Jan 14 21:37:30 EST 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fe70000 (usable)
> BIOS-e820: 000000003fe70000 - 000000003fe72000 (ACPI NVS)
> BIOS-e820: 000000003fe72000 - 000000003fe93000 (ACPI data)
> BIOS-e820: 000000003fe93000 - 000000003ff00000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>126MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000fe710
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 261744) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   261744
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   261744
>On node 0 totalpages: 261744
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 252 pages used for memmap
>  HighMem zone: 32116 pages, LIFO batch:7
>  Movable zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000FEB90, 0014 (r0 DELL  )
>ACPI: RSDT 000FD283, 0034 (r1 DELL    DE051          8 ASL        61)
>ACPI: FACP 000FD2B7, 0074 (r1 DELL    DE051          8 ASL        61)
>ACPI: DSDT FFFCF83C, 24C9 (r1   DELL    dt_ex     1000 MSFT  100000D)
>ACPI: FACS 3FE70000, 0040
>ACPI: SSDT FFFD1E42, 00BA (r1   DELL    st_ex     1000 MSFT  100000D)
>ACPI: APIC 000FD32B, 006C (r1 DELL    DE051          8 ASL        61)
>ACPI: BOOT 000FD397, 0028 (r1 DELL    DE051          8 ASL        61)
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 40000000 (gap: 3ff00000:bed00000)
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>Built 1 zonelists in Zone order.  Total pages: 259700
>Kernel command line: ro root=LABEL=/1 rhgb quiet 
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07a8000 soft=c0788000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2527.124 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1029796k/1046976k available (2185k kernel code, 16400k reserved, 1116k data, 280k init, 129472k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc073f000 - 0xc0785000   ( 280 kB)
>      .data : 0xc062250d - 0xc0739544   (1116 kB)
>      .text : 0xc0400000 - 0xc062250d   (2185 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 5056.76 BogoMIPS (lpj=2528380)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 256K
>CPU: Hyper-Threading is disabled
>CPU: After all inits, caps: bfebf3ff 00000000 00000000 0000b180 0000441d 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>CPU0: Intel(R) Celeron(R) CPU 2.53GHz stepping 09
>Total of 1 processors activated (5056.76 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=1552 bytes
>Booting paravirtualized kernel on bare hardware
>Time:  1:44:37  Date: 02/03/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfbbf0, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>HPET at base address 0xfed00000
>PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 0880-08bf claimed by ICH4 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 10 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet clockevent registered
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Time: tsc clocksource has been installed.
>pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:00: iomem range 0x100000-0xffffff could not be reserved
>pnp: 00:00: iomem range 0x1000000-0x3fe6ffff could not be reserved
>pnp: 00:00: iomem range 0xc0000-0xfffff could not be reserved
>pnp: 00:09: ioport range 0x800-0x85f has been reserved
>pnp: 00:09: ioport range 0xc00-0xc7f has been reserved
>pnp: 00:09: ioport range 0x860-0x8ff could not be reserved
>PCI: Bridge: 0000:00:1e.0
>  IO window: d000-dfff
>  MEM window: fa000000-feafffff
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2920k freed
>Simple Boot Flag at 0x7a set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1202003077.677:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 75B2EDBADB2FF0B
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>PCI: Firmware left 0000:01:08.0 e100 interrupts enabled, disabling
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not present [20070126]
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected an Intel 865 Chipset.
>agpgart: Detected 892K stolen memory.
>agpgart: AGP aperture is 128M @ 0xe8000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 12:983:709
>Freeing unused kernel memory: 280k freed
>Write protecting the kernel read-only data: 845k
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 16, io mem 0xffa80800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000ff80
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000ff60
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 17, io base 0x0000ff20
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
>ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
>ata1.00: ATA-7: Maxtor 6L160P0, BAJ41G10, max UDMA/133
>ata1.00: 312500000 sectors, multi 8: LBA48 
>ata1.00: configured for UDMA/133
>usb 2-1: new low speed USB device using uhci_hcd and address 2
>usb 2-1: configuration #1 chosen from 1 choice
>input: Logitech USB Optical Mouse as /class/input/input1
>input: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1
>ata2.00: ATAPI: PHILIPS DVD+/-RW DVD8801, 2D06, max UDMA/33
>ata2.01: ATA-6: WDC WD1200JB-00EVA0, 15.05R15, max UDMA/100
>ata2.01: 234441648 sectors, multi 8: LBA48 
>ata2.01: limited to UDMA/33 due to 40-wire cable
>ata2.00: configured for UDMA/33
>ata2.01: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6L160P0   BAJ4 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 312500000 512-byte hardware sectors (160000 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 312500000 512-byte hardware sectors (160000 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 <<6>usb 2-2: new low speed USB device using uhci_hcd and address 3
> sda5 sda6 > sda4
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            PHILIPS  DVD+-RW DVD8801  2D06 PQ: 0 ANSI: 5
>scsi 1:0:1:0: Direct-Access     ATA      WDC WD1200JB-00E 15.0 PQ: 0 ANSI: 5
>sd 1:0:1:0: [sdb] 234441648 512-byte hardware sectors (120034 MB)
>sd 1:0:1:0: [sdb] Write Protect is off
>sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:1:0: [sdb] 234441648 512-byte hardware sectors (120034 MB)
>sd 1:0:1:0: [sdb] Write Protect is off
>sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 sdb3
>sd 1:0:1:0: [sdb] Attached SCSI disk
>usb 2-2: configuration #1 chosen from 1 choice
>input: DELL DELL USB Keyboard as /class/input/input2
>input: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:00:1d.0-2
>usb 4-2: new full speed USB device using uhci_hcd and address 2
>usb 4-2: configuration #1 chosen from 1 choice
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: sdb1: orphan cleanup on readonly fs
>ext3_orphan_cleanup: deleting unreferenced inode 3961068
>ext3_orphan_cleanup: deleting unreferenced inode 3961066
>ext3_orphan_cleanup: deleting unreferenced inode 3961064
>ext3_orphan_cleanup: deleting unreferenced inode 3961062
>ext3_orphan_cleanup: deleting unreferenced inode 3961060
>EXT3-fs: sdb1: 5 orphan inodes deleted
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>security:  8 users, 12 roles, 2346 types, 114 bools, 1 sens, 1024 cats
>security:  67 classes, 215039 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sdb1, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1202003085.635:2): policy loaded auid=4294967295
>sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>sd 1:0:1:0: Attached scsi generic sg2 type 0
>dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>input: PC Speaker as /class/input/input3
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 20
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>Initializing USB Mass Storage driver...
>scsi2 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [VBTN]
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>intel_rng: Firmware space is locked read-only. If you can't or
>intel_rng: don't want to disable this in firmware setup, and if
>intel_rng: you are certain that your system has a functional
>intel_rng: RNG, try using the 'no_fwh_detect' option.
>Linux video capture interface: v2.00
>parport_pc 00:08: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>parport0: Printer, Hewlett-Packard OfficeJet K80
>e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
>e100: Copyright(c) 1999-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:01:08.0[A] -> GSI 20 (level, low) -> IRQ 21
>e100: eth0: e100_probe: addr 0xfeaff000, irq 21, MAC addr 00:16:76:4E:0C:BB
>cx2388x alsa driver version 0.0.6 loaded
>ACPI: PCI Interrupt 0000:01:00.1[A] -> GSI 21 (level, low) -> IRQ 22
>CORE cx88[0]: subsystem: 7063:5500, board: pcHDTV HD5500 HDTV [card=47,autodetected]
>TV tuner 64 at 0x1fe, Radio tuner -1 at 0x1fe
>cx2388x v4l2 driver version 0.0.6 loaded
>cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded
>cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 21 (level, low) -> IRQ 22
>cx88[0]/0: found at 0000:01:00.0, rev: 5, irq: 22, latency: 64, mmio: 0xfa000000
>tuner 1-0043: chip found @ 0x86 (cx88[0])
>tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner)
>tuner 1-0061: chip found @ 0xc2 (cx88[0])
>tuner 1-0061: type set to 64 (LG TDVS-H06xF)
>tuner 1-0061: type set to 64 (LG TDVS-H06xF)
>cx88[0]/0: registered device video0 [v4l2]
>cx88[0]/0: registered device vbi0
>cx88[0]/2: cx2388x 8802 Driver Manager
>ACPI: PCI Interrupt 0000:01:00.2[A] -> GSI 21 (level, low) -> IRQ 22
>cx88[0]/2: found at 0000:01:00.2, rev: 5, irq: 22, latency: 64, mmio: 0xfc000000
>cx2388x dvb driver version 0.0.6 loaded
>cx8802_register_driver() ->registering driver type=dvb access=shared
>CORE cx88[0]: subsystem: 7063:5500, board: pcHDTV HD5500 HDTV [card=47]
>cx88[0]/2: cx2388x based dvb card
>DVB: registering new adapter (cx88[0])
>DVB: registering frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)...
>usbcore: registered new interface driver snd-usb-audio
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>AC'97 0 analog subsections not ready
>intel8x0_measure_ac97_clock: measured 50398 usecs
>intel8x0: clocking to 48000
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>usb-storage: device scan complete
>scsi 2:0:0:0: Direct-Access     DMI      MultiFlash       3.00 PQ: 0 ANSI: 0 CCS
>scsi 2:0:0:1: Direct-Access     DMI      MultiFlash       3.00 PQ: 0 ANSI: 0 CCS
>scsi 2:0:0:2: Direct-Access     DMI      MultiFlash       3.00 PQ: 0 ANSI: 0 CCS
>scsi 2:0:0:3: Direct-Access     DMI      MultiFlash       3.00 PQ: 0 ANSI: 0 CCS
>sd 2:0:0:0: [sdc] Attached SCSI removable disk
>sd 2:0:0:0: Attached scsi generic sg3 type 0
>sd 2:0:0:1: [sdd] Attached SCSI removable disk
>sd 2:0:0:1: Attached scsi generic sg4 type 0
>sd 2:0:0:2: [sde] Attached SCSI removable disk
>sd 2:0:0:2: Attached scsi generic sg5 type 0
>sd 2:0:0:3: [sdf] Attached SCSI removable disk
>sd 2:0:0:3: Attached scsi generic sg6 type 0
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sdb1, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdb3, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>audit(1202003381.389:3): audit_pid=1986 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>eth0: no IPv6 routers present
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized i915 1.6.0 20060119 on minor 0

Actions: View

Attachments on bug 431340: 293816 | 293817