Attachment 294370 Details for Bug 432052 – Kernel Log

Kernel Log

aen.TXT (text/plain), 22.72 KB, created by Atul Mukker on 2008-02-08 16:11:23 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Atul Mukker

Created: 2008-02-08 16:11:23 UTC

Size: 22.72 KB

patch

obsolete

>
>machine restart
>Linux version 2.6.18-prep (root@localhost.localdomain) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP Thu Feb 7 11:52:13 EST 2008
>Command line: ro root=/dev/VolGroup00/LogVol00 console=ttyS0,115200 console=tty0
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 0000000000098400 (usable)
> BIOS-e820: 0000000000098400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000c8000 - 00000000000d0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
> BIOS-e820: 000000003fee0000 - 000000003fee7000 (ACPI data)
> BIOS-e820: 000000003fee7000 - 000000003ff00000 (ACPI NVS)
> BIOS-e820: 000000003ff00000 - 000000003ff80000 (usable)
> BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fe000000 - 00000000fed00000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>DMI present.
>No NUMA configuration found
>Faking a node at 0000000000000000-000000003ff80000
>Bootmem setup node 0 0000000000000000-000000003ff80000
>Memory for crash kernel (0x0 to 0x0) notwithin permissible range
>disabling kdump
>ACPI: PM-Timer IO Port: 0xf008
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:6 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
>Processor #2 15:6 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
>Processor #4 15:6 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
>Processor #6 15:6 APIC version 20
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
>Processor #1 15:6 APIC version 20
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
>Processor #3 15:6 APIC version 20
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
>Processor #5 15:6 APIC version 20
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
>Processor #7 15:6 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
>IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>Setting APIC routing to physical flat
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 0000000000098000 - 0000000000099000
>Nosave address range: 0000000000099000 - 00000000000a0000
>Nosave address range: 00000000000a0000 - 00000000000c8000
>Nosave address range: 00000000000c8000 - 00000000000d0000
>Nosave address range: 00000000000d0000 - 00000000000e0000
>Nosave address range: 00000000000e0000 - 0000000000100000
>Nosave address range: 000000003fee0000 - 000000003fee7000
>Nosave address range: 000000003fee7000 - 000000003ff00000
>Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
>SMP: Allowing 8 CPUs, 0 hotplug CPUs
>Built 1 zonelists.  Total pages: 254048
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 console=ttyS0,115200 console=tty0
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Console: colour VGA+ 80x25
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      8192
>... CHAINHASH_SIZE:          4096
> memory used by lock dependency info: 1328 kB
> per task-struct memory footprint: 1680 bytes
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Checking aperture...
>Memory: 1010488k/1048064k available (2488k kernel code, 37032k reserved, 1590k data, 192k init)
>Calibrating delay using timer specific routine.. 5990.76 BogoMIPS (lpj=2995384)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM1)
>lockdep: not fixing up alternatives.
>ACPI: Core revision 20060707
>Using local APIC timer interrupts.
>result 10390754
>Detected 10.390 MHz APIC timer.
>lockdep: not fixing up alternatives.
>Booting processor 1/8 APIC 0x2
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5984.23 BogoMIPS (lpj=2992116)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM1)
>                   Genuine Intel(R) CPU 3.00GHz stepping 02
>lockdep: not fixing up alternatives.
>Booting processor 2/8 APIC 0x4
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 5984.28 BogoMIPS (lpj=2992143)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 0
>CPU2: Thermal monitoring enabled (TM1)
>                   Genuine Intel(R) CPU 3.00GHz stepping 02
>lockdep: not fixing up alternatives.
>Booting processor 3/8 APIC 0x6
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 5984.29 BogoMIPS (lpj=2992148)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 1
>CPU3: Thermal monitoring enabled (TM1)
>                   Genuine Intel(R) CPU 3.00GHz stepping 02
>lockdep: not fixing up alternatives.
>Booting processor 4/8 APIC 0x1
>Initializing CPU#4
>Calibrating delay using timer specific routine.. 5984.37 BogoMIPS (lpj=2992189)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU4: Thermal monitoring enabled (TM1)
>                   Genuine Intel(R) CPU 3.00GHz stepping 02
>lockdep: not fixing up alternatives.
>Booting processor 5/8 APIC 0x3
>Initializing CPU#5
>Calibrating delay using timer specific routine.. 5984.32 BogoMIPS (lpj=2992162)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU5: Thermal monitoring enabled (TM1)
>                   Genuine Intel(R) CPU 3.00GHz stepping 02
>lockdep: not fixing up alternatives.
>Booting processor 6/8 APIC 0x5
>Initializing CPU#6
>Calibrating delay using timer specific routine.. 5984.27 BogoMIPS (lpj=2992138)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 0
>CPU6: Thermal monitoring enabled (TM1)
>                   Genuine Intel(R) CPU 3.00GHz stepping 02
>lockdep: not fixing up alternatives.
>Booting processor 7/8 APIC 0x7
>Initializing CPU#7
>Calibrating delay using timer specific routine.. 5984.34 BogoMIPS (lpj=2992173)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 1
>CPU7: Thermal monitoring enabled (TM1)
>                   Genuine Intel(R) CPU 3.00GHz stepping 02
>Brought up 8 CPUs
>testing NMI watchdog ... OK.
>time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
>time.c: Detected 2992.553 MHz processor.
>migration_cost=9,955
>checking if image is initramfs... it is
>Freeing initrd memory: 3270k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG at e0000000
>PCI: No mmconfig possible on device 8:5
>PCI: No mmconfig possible on device 8:8
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: Device [ECP] status [00000008]: functional but not present; setting present
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 14 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>PCI: Bridge: 0000:02:00.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:02:02.0
>  IO window: 3000-3fff
>  MEM window: fd100000-fd1fffff
>  PREFETCH window: 50000000-500fffff
>PCI: Bridge: 0000:01:00.0
>  IO window: 3000-3fff
>  MEM window: fd100000-fd1fffff
>  PREFETCH window: 50000000-500fffff
>PCI: Bridge: 0000:01:00.3
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:02.0
>  IO window: 3000-3fff
>  MEM window: fd100000-fd1fffff
>  PREFETCH window: 50000000-500fffff
>PCI: Bridge: 0000:00:03.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Ignore bogus resource 6 [0:0] of 0000:08:05.0
>PCI: Bridge: 0000:00:1e.0
>  IO window: 4000-4fff
>  MEM window: fd200000-fdffffff
>  PREFETCH window: fc000000-fcffffff
>GSI 16 sharing vector 0xA9 and IRQ 16
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169
>GSI 17 sharing vector 0xB1 and IRQ 17
>ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 177
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 65536 (order: 9, 3670016 bytes)
>TCP bind hash table entries: 32768 (order: 8, 1835008 bytes)
>TCP: Hash tables configured (established 65536 bind 32768)
>TCP reno registered
>Simple Boot Flag at 0x5c set to 0x1
>audit: initializing netlink socket (disabled)
>audit(1202411298.831:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Real Time Clock Driver v1.12ac
>hpet_acpi_add: no address or irqs in _CRS
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0d: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ESB2: IDE controller at PCI slot 0000:00:1f.1
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 177
>ESB2: chipset revision 9
>ESB2: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x2420-0x2427, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0x2428-0x242f, BIOS settings: hdc:pio, hdd:pio
>hda: HL-DT-STCD-RW/DVD DRIVE GCC-4244N, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KEYB,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>ACPI: (supports S0 S1 S4 S5)
>Freeing unused kernel memory: 192k freed
>input: AT Translated Set 2 keyboard as /class/input/input0
>Write protecting the kernel read-only data: 486k
>USB Universal Host Controller Interface driver v3.0
>GSI 18 sharing vector 0xE9 and IRQ 18
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 233
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 233, io base 0x00001000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>GSI 19 sharing vector 0x32 and IRQ 19
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 50
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 50, io base 0x00001400
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>GSI 20 sharing vector 0x3A and IRQ 20
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 58
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 58, io base 0x00001800
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>input: ImPS/2 Generic Wheel Mouse as /class/input/input1
>GSI 21 sharing vector 0x42 and IRQ 21
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 20 (level, low) -> IRQ 66
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 66, io base 0x00001c00
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 233
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: irq 233, io mem 0xfd000000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb 3-1: new full speed USB device using uhci_hcd and address 2
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>SCSI subsystem initialized
>megasr: module license 'LSI Proprietary' taints kernel.
>LSI MegaSR RAID5 version v10.12.0129.2008-TEST01, built on Feb  7 2008 at 12:08:52
>megasr: [RAID HBA] 0x8086:0x2682:0x1734:0x1090: bus 0:slot 31:func 2
>GSI 22 sharing vector 0x4A and IRQ 22
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 74
>megasr[ahci]: HBA capabilities[0xc6207f05], S64A:[x] SNCQ:[x] SSNTF:[ ] SSS:[ ] ISS:[0x2] SPM:[ ] SSC:[x] PSC:[x] NCS:[0x1f] CCCS:[ ] EMS:[ ] NP:[0x5]
>megasr[ahci]: Device:[0:WDC WD5000AAKS-0] NCQ:[Yes] Queue Depth:[0x20] capacity=0x3a386030
>megasr[ahci]: Device:[1:WDC WD5000AAKS-0] NCQ:[Yes] Queue Depth:[0x20] capacity=0x3a386030
>megasr[ahci]: Device:[2:WDC WD5000AAKS-0] NCQ:[Yes] Queue Depth:[0x20] capacity=0x3a386030
>megasr[ahci]: Device:[3:WDC WD5000AAKS-0] NCQ:[Yes] Queue Depth:[0x20] capacity=0x3a386030
>megasr[ahci]: Device:[4:WDC WD5000AAKS-0] NCQ:[Yes] Queue Depth:[0x20] capacity=0x3a386030
>megasr: raid 1 logical drive is degraded, is not initialized, has 2 drives, and has a size of 0x3a175800 sectors.
>megasr: raid 5 logical drive is degraded, is not initialized, has 3 drives, and has a size of 0x249f0000 sectors.
>megasr[raid_key]: [x] RAID5 support    [ ] SAS drive support
>scsi0 : LSI MegaSR RAID5
>  Vendor: LSI       Model: MegaSR            Rev: 1.0 
>  Type:   Direct-Access                      ANSI SCSI revision: 04
>SCSI device sda: 974608384 512-byte hdwr sectors (498999 MB)
>sda: Write Protect is off
>SCSI device sda: drive cache: none
>SCSI device sda: 974608384 512-byte hdwr sectors (498999 MB)
>sda: Write Protect is off
>SCSI device sda: drive cache: none
> sda: sda1 sda2
>sd 0:2:0:0: Attached scsi disk sda
>  Vendor: LSI       Model: MegaSR            Rev: 1.0 
>  Type:   Direct-Access                      ANSI SCSI revision: 04
>SCSI device sdb: 614400000 512-byte hdwr sectors (314573 MB)
>sdb: Write Protect is off
>SCSI device sdb: drive cache: none
>SCSI device sdb: 614400000 512-byte hdwr sectors (314573 MB)
>sdb: Write Protect is off
>SCSI device sdb: drive cache: none
> sdb: unknown partition table
>sd 0:2:1:0: Attached scsi disk sdb
>usb 3-1: new full speed USB device using uhci_hcd and address 3
>device-mapper: ioctl: 4.11.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
>usb 3-1: configuration #1 chosen from 1 choice
>input: ServerEngines SE USB Device as /class/input/input2
>input: USB HID v1.11 Keyboard [ServerEngines SE USB Device] on usb-0000:00:1d.2-1
>input: ServerEngines SE USB Device as /class/input/input3
>input: USB HID v1.11 Mouse [ServerEngines SE USB Device] on usb-0000:00:1d.2-1
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1202411306.443:2): enforcing=1 old_enforcing=0 auid=4294967295
>audit(1202411306.928:3): policy loaded auid=4294967295
>audit(1202411415.639:6): audit_pid=0 old=2861 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>Removing netfilter NETLINK layer.
>NMI Watchdog detected LOCKUP on CPU 5
>CPU 5 
>Modules linked in: autofs4(U) hidp(U) rfcomm(U) l2cap(U) bluetooth(U) sunrpc(U) ipt_REJECT(U) ip6t_REJECT(U) xt_tcpudp(U) x_tables(U) ipv6(U) dm_multipath(U) video(U) sbs(U) backlight(U) i2c_ec(U) button(U) battery(U) asus_acpi(U) acpi_memhotplug(U) ac(U) lp(U) shpchp(U) 3c59x(U) ide_cd(U) cdrom(U) mii(U) floppy(U) i2c_i801(U) parport_pc(U) parport(U) serio_raw(U) i2c_core(U) pcspkr(U) sg(U) dm_snapshot(U) dm_zero(U) dm_mirror(U) dm_mod(U) ata_piix(U) libata(U) megasr(U) sd_mod(U) scsi_mod(U) ext3(U) jbd(U) ehci_hcd(U) ohci_hcd(U) uhci_hcd(U)
>Pid: 4609, comm: dd Tainted: P      2.6.18-prep #1
>RIP: 0010:[<ffffffff8006221d>]  [<ffffffff8006221d>] __read_lock_failed+0x5/0x14
>RSP: 0018:ffff81003fe6bb10  EFLAGS: 00000097
>RAX: 0000000000000005 RBX: ffff81002c24fa00 RCX: 0000000000000002
>RDX: 0000000000000000 RSI: ffffffff802a59ba RDI: ffff81002c24fa00
>RBP: ffff81002c24fa00 R08: 0000000000000002 R09: 0000000000000001
>R10: ffff81003e5b45f0 R11: ffff81002c24fa18 R12: 0000000000020001
>R13: 0000000000000005 R14: ffff81003e4f9de9 R15: 0000000000000067
>FS:  0000000000000000(0000) GS:ffff81003ff1e2c0(0000) knlGS:0000000000000000
>CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
>CR2: 0000003743614cdb CR3: 0000000038e70000 CR4: 00000000000006e0
>Process dd (pid: 4609, threadinfo ffff81003cf82000, task ffff810039072100)
>Stack:  ffffffff8000c945 ffff8100223973d8 ffffffff800e65d6 ffffffff803007b8
> ffff8100223973d8 0000000000020001 000000000000001d ffff81003e5b4570
> ffffffff8004dcd2 0000000000020001 ffffffff8812f290 000000000000001d
>Call Trace:
> <IRQ>  [<ffffffff8000c945>] _raw_read_lock+0x27/0x29
> [<ffffffff800e65d6>] send_sigio+0x18/0xb6
> [<ffffffff8004dcd2>] __kill_fasync+0x46/0x54
> [<ffffffff800445bf>] kill_fasync+0x2c/0x41
> [<ffffffff880b6b3f>] :megasr:osl_post_aen+0x2a/0x2e
> [<ffffffff880ca97f>] :megasr:rcl_evtmgr_log_event+0x1564/0x16c7
> [<ffffffff8004641b>] try_to_wake_up+0x407/0x418
> [<ffffffff880c831e>] :megasr:rx_update_auto_resume_data+0x467/0x481
> [<ffffffff880e0e83>] :megasr:r5_update_st_prog+0x1b/0x50
> [<ffffffff880e1fa9>] :megasr:r5_do_next+0x1c8/0x41a
> [<ffffffff880ec6bd>] :megasr:hal_ahci_complete_commands+0x293/0x2bb
> [<ffffffff880f1461>] :megasr:hal_ahci_isr+0xc27/0xca5
> [<ffffffff880b6d9b>] :megasr:lsraid_isr+0x20/0x49
> [<ffffffff80010ca5>] handle_IRQ_event+0x22/0x56
> [<ffffffff800bdea9>] __do_IRQ+0xa5/0x107
> [<ffffffff80012204>] __do_softirq+0x95/0xf3
> [<ffffffff8006d8fc>] do_IRQ+0xf6/0x104
> [<ffffffff8005d652>] ret_from_intr+0x0/0xf
> <EOI>  [<ffffffff8001600c>] __bitmap_empty+0x58/0x64
> [<ffffffff800769fd>] flush_tlb_mm+0xa8/0xd5
> [<ffffffff800211f3>] sys_mprotect+0x6b9/0x858
> [<ffffffff8005d2a6>] tracesys+0xd5/0xdf
>
>
>Code: 83 3f 01 78 f9 f0 ff 0f 0f 88 ed ff ff ff c3 89 d1 f3 a5 c3 
>Kernel panic - not syncing: nmi watchdog
> <0>BUG: spinlock lockup on CPU#3, kjournald/615, ffffffff802efea0 (Tainted: P     )
>
>Call Trace:
> <NMI>  [<ffffffff800077ac>] _raw_spin_lock+0xcd/0xeb
> [<ffffffff80066411>] oops_begin+0x3a/0x70
> [<ffffffff80066654>] die_nmi+0xf/0xbc
> [<ffffffff80066d61>] nmi_watchdog_tick+0x107/0x1fb
> [<ffffffff800668fa>] default_do_nmi+0x86/0x214
> [<ffffffff80066eb6>] do_nmi+0x61/0x94
> [<ffffffff800661f3>] nmi+0x7f/0x80
> [<ffffffff8001532c>] sync_buffer+0x0/0x42
> [<ffffffff8000774c>] _raw_spin_lock+0x6d/0xeb
> <<EOE>>  [<ffffffff8807cd90>] :scsi_mod:scsi_request_fn+0x197/0x395
> [<ffffffff8005a789>] generic_unplug_device+0x18/0x25
> [<ffffffff8816abd2>] :dm_mod:dm_table_unplug_all+0x33/0x41
> [<ffffffff88168d57>] :dm_mod:dm_unplug_all+0x1d/0x28
> [<ffffffff8005c2bd>] blk_backing_dev_unplug+0x54/0x5a
> [<ffffffff80015365>] sync_buffer+0x39/0x42
> [<ffffffff80063aa1>] __wait_on_bit+0x40/0x6e
> [<ffffffff8001532c>] sync_buffer+0x0/0x42
> [<ffffffff80063b3b>] out_of_line_wait_on_bit+0x6c/0x78
> [<ffffffff8009f1df>] wake_bit_function+0x0/0x23
> [<ffffffff88035a9f>] :jbd:journal_commit_transaction+0x5eb/0x1160
> [<ffffffff88039d85>] :jbd:kjournald+0xc2/0x21d
> [<ffffffff8009f1b1>] autoremove_wake_function+0x0/0x2e
> [<ffffffff88039cc3>] :jbd:kjournald+0x0/0x21d
> [<ffffffff8009effd>] keventd_create_kthread+0x0/0x66
> [<ffffffff80033491>] kthread+0xfe/0x132
> [<ffffffff8005e079>] child_rip+0xa/0x11
> [<ffffffff8005d6a8>] restore_args+0x0/0x30
> [<ffffffff80033393>] kthread+0x0/0x132
> [<ffffffff8005e06f>] child_rip+0x0/0x11
>

Actions: View

Attachments on bug 432052: 294370