Attachment 294462 Details for Bug 432168 – working kernel

working kernel

dmesg.2.6.23.1-42.fc8.txt (text/plain), 19.87 KB, created by Dušan Hokův on 2008-02-09 11:00:47 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Dušan Hokův

Created: 2008-02-09 11:00:47 UTC

Size: 19.87 KB

patch

obsolete

>Linux version 2.6.23.1-42.fc8 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Tue Oct 30 13:55:12 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001dff0000 (usable)
> BIOS-e820: 000000001dff0000 - 000000001dffffc0 (ACPI data)
> BIOS-e820: 000000001dffffc0 - 000000001e000000 (ACPI NVS)
> BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>479MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 122864) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   122864
>  HighMem    122864 ->   122864
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   122864
>On node 0 totalpages: 122864
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 927 pages used for memmap
>  Normal zone: 117841 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000E6010, 0014 (r0 OID_00)
>ACPI: RSDT 1DFFCF70, 0030 (r1 INSYDE RSDT_000        1 _CSI    10103)
>ACPI: FACP 1DFFFB00, 0074 (r1 INSYDE FACP_000      100 _CSI    10103)
>ACPI: DSDT 1DFFCFB0, 2B44 (r1 INSYDE INTELIC4     1004 INTL  2002025)
>ACPI: FACS 1DFFFFC0, 0040
>ACPI: BOOT 1DFFFB90, 0028 (r1 INSYDE SYS_BOOT      100 _CSI    10103)
>ACPI: DBGP 1DFFFBC0, 0034 (r1 INSYDE DBGP_000      100 _CSI    10103)
>ACPI: PM-Timer IO Port: 0x1008
>Allocating PCI resources starting at 20000000 (gap: 1e000000:e1b80000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
>swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
>Built 1 zonelists in Zone order.  Total pages: 121905
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 vga=791
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffb000 (013cd000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07a8000 soft=c0788000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Detected 1294.794 MHz processor.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 478576k/491456k available (2183k kernel code, 12256k reserved, 1117k data, 280k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xde800000 - 0xff7fe000   ( 527 MB)
>    lowmem  : 0xc0000000 - 0xddff0000   ( 479 MB)
>      .init : 0xc073f000 - 0xc0785000   ( 280 kB)
>      .data : 0xc0621f7d - 0xc0739544   (1117 kB)
>      .text : 0xc0400000 - 0xc0621f7d   (2183 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 2590.50 BogoMIPS (lpj=1295250)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 1024K
>CPU: After all inits, caps: afe9f1bf 00000000 00000000 00002040 00000000 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>ACPI: setting ELCR to 0200 (from 0ca8)
>CPU0: Intel(R) Celeron(R) M processor         1.30GHz stepping 06
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=1552 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 11:09:48  Date: 02/09/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xe9854, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>Force enabled HPET at base address 0xfed00000
>PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 1300-133f claimed by ICH4 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7) *10
>ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *5
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 10 11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 10 11) *7
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 10 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet clockevent registered
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Time: tsc clocksource has been installed.
>pnp: 00:05: iomem range 0xfff80000-0xffffffff could not be reserved
>pnp: 00:07: ioport range 0x680-0x6ff has been reserved
>pnp: 00:07: ioport range 0x200-0x20f has been reserved
>pnp: 00:07: ioport range 0x290-0x297 has been reserved
>pnp: 00:07: ioport range 0x1000-0x107f has been reserved
>pnp: 00:07: ioport range 0x1300-0x133f has been reserved
>PCI: Bus 2, cardbus bridge: 0000:01:03.0
>  IO window: 0000c400-0000c4ff
>  IO window: 0000c800-0000c8ff
>  PREFETCH window: a0000000-a3ffffff
>  MEM window: e4000000-e7ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: c000-dfff
>  MEM window: e0000000-efffffff
>  PREFETCH window: a0000000-afffffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:01:03.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 196608 bytes)
>TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>checking if image is initramfs... it is
>Switched to high resolution mode on CPU 0
>Freeing initrd memory: 3593k freed
>Simple Boot Flag at 0x37 set to 0x1
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1202555388.660:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 230FF4508E76ABC1
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>vesafb: framebuffer at 0xb0000000, mapped to 0xde880000, using 3072k, total 32576k
>vesafb: mode is 1024x768x16, linelength=2048, pages=20
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected an Intel 855GM Chipset.
>agpgart: Detected 32636K stolen memory.
>agpgart: AGP aperture is 128M @ 0xb0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI interrupt for device 0000:00:1f.6 disabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:01:03.0 [1071:8089]
>Yenta: Enabling burst memory read transactions
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:01:03.0, mfunc 0x01111c02, devctl 0x64
>Yenta: ISA IRQ mask 0x04f8, PCI irq 11
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#01) from #01 to #05
>pcmcia: parent PCI bridge I/O window: 0xc000 - 0xdfff
>cs: IO port probe 0xc000-0xdfff: clean.
>pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xefffffff
>pcmcia: parent PCI bridge Memory window: 0xa0000000 - 0xafffffff
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 12:431:175
>  hash matches device device:0b
>Freeing unused kernel memory: 280k freed
>Write protecting the kernel read-only data: 849k
>Marking TSC unstable due to: TSC halts in idle.
>Time: hpet clocksource has been installed.
>Synaptics Touchpad, model: 1, fw: 5.9, id: 0x256eb1, caps: 0x804713/0x0
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 10, io mem 0xfebff000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 7
>PCI: setting IRQ 7 as level-triggered
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 7 (level, low) -> IRQ 7
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 7, io base 0x00001200
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001600
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001700
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 3-1: new low speed USB device using uhci_hcd and address 2
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ata_piix 0000:00:1f.1: version 2.12
>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011100 irq 14
>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011108 irq 15
>usb 3-1: configuration #1 chosen from 1 choice
>input: Genius       Optical Mouse as /class/input/input3
>input: USB HID v1.10 Mouse [Genius       Optical Mouse] on usb-0000:00:1d.1-1
>ata1.00: ATA-7: SAMSUNG MP0402H, UC100-14, max UDMA/100
>ata1.00: 78242976 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>ata2.00: ATAPI: UJDA760 DVD/CDRW, 1.01, max UDMA/33
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG MP0402H  UC10 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 78242976 512-byte hardware sectors (40060 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 78242976 512-byte hardware sectors (40060 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            MATSHITA UJDA760 DVD/CDRW 1.01 PQ: 0 ANSI: 5
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 60 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1202555397.585:2): selinux=0 auid=4294967295
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>intel_rng: Firmware space is locked read-only. If you can't or
>intel_rng: don't want to disable this in firmware setup, and if
>intel_rng: you are certain that your system has a functional
>intel_rng: RNG, try using the 'no_fwh_detect' option.
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Sleep Button (CM) as /class/input/input5
>ACPI: Sleep Button (CM) [SBTN]
>input: Lid Switch as /class/input/input6
>ACPI: Lid Switch [LID]
>ACPI: AC Adapter [AC] (off-line)
>iTCO_vendor_support: vendor-support=0
>ACPI: Battery Slot [BAT0] (battery present)
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 3
>PCI: setting IRQ 3 as level-triggered
>ACPI: PCI Interrupt 0000:01:02.0[A] -> Link [LNKE] -> GSI 3 (level, low) -> IRQ 3
>PCI: Setting latency timer of device 0000:01:02.0 to 64
>eth0: VIA Rhine III at 0xe0000000, 00:40:d0:6d:06:13, IRQ 3.
>eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
>input: Video Bus as /class/input/input7
>ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>ACPI: PCI Interrupt 0000:01:01.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>phy0: Selected rate control algorithm 'simple'
>ath_pci 0000:01:01.0: AR5212 chip found: mac 5.5 phy 4.3
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>intel8x0_measure_ac97_clock: measured 50443 usecs
>intel8x0: clocking to 48000
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.6 to 64
>loop: module loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
>Adding 458744k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:458744k
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>eth0: link down
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:0d:88:bd:3c:64
>wlan0: RX authentication from 00:0d:88:bd:3c:64 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:0d:88:bd:3c:64
>wlan0: RX AssocResp from 00:0d:88:bd:3c:64 (capab=0x41 status=0 aid=1)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>wlan0: no IPv6 routers present
>eth0: link down
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:0d:88:bd:3c:64
>wlan0: authenticate with AP 00:0d:88:bd:3c:64
>wlan0: RX authentication from 00:0d:88:bd:3c:64 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:0d:88:bd:3c:64
>wlan0: RX AssocResp from 00:0d:88:bd:3c:64 (capab=0x41 status=0 aid=1)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 7 (level, low) -> IRQ 7
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>PCI: Enabling device 0000:00:02.1 (0000 -> 0002)
>[drm] Initialized i915 1.6.0 20060119 on minor 1
>wlan0: no IPv6 routers present
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:0d:88:bd:3c:64
>wlan0: authenticate with AP 00:0d:88:bd:3c:64
>wlan0: RX authentication from 00:0d:88:bd:3c:64 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:0d:88:bd:3c:64
>wlan0: RX ReassocResp from 00:0d:88:bd:3c:64 (capab=0x41 status=0 aid=1)
>wlan0: associated
>wlan0: no IPv6 routers present

Actions: View

Attachments on bug 432168: 294461 | 294462