Attachment 294516 Details for Bug 300931 – lspci -vv output on a working kernel

lspci -vv output on a working kernel

lspci-2.6.23.8-63.fc8 (text/plain), 26.40 KB, created by Kasper Dupont on 2008-02-10 21:53:43 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Kasper Dupont

Created: 2008-02-10 21:53:43 UTC

Size: 26.40 KB

patch

obsolete

>00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
>	Subsystem: Mitac Unknown device 8224
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
>	Latency: 0
>	Capabilities: [e0] Vendor Specific Information <?>
>
>00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>	I/O behind bridge: 00006000-00006fff
>	Memory behind bridge: 6c300000-6c3fffff
>	Prefetchable memory behind bridge: 0000000050000000-000000005fffffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [88] Subsystem: Mitac Unknown device 8224
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
>		Address: fee0300c  Data: 41c9
>	Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
>			ExtTag- RBE- FLReset-
>		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>		LnkCap:	Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <4us
>			ClockPM- Suprise- LLActRep- BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
>			Slot #  1, PowerLimit 75.000000; Interlock- NoCompl-
>		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>			Control: AttnInd Off, PwrInd On, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
>			Changed: MRL- PresDet+ LinkState-
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>	Kernel driver in use: pcieport-driver
>
>00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
>	Subsystem: Mitac Unknown device 8224
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 21
>	Region 0: Memory at 6c400000 (64-bit, non-prefetchable) [size=16K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
>			ExtTag- RBE- FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
>			ClockPM- Suprise- LLActRep- BwNot-
>		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
>	Kernel driver in use: HDA Intel
>	Kernel modules: snd-hda-intel
>
>00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
>	I/O behind bridge: 00005000-00005fff
>	Memory behind bridge: 6b300000-6c2fffff
>	Prefetchable memory behind bridge: 0000000064100000-00000000650fffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
>			ExtTag- RBE- FLReset-
>		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
>			ClockPM- Suprise- LLActRep+ BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
>			Slot #  0, PowerLimit 6.500000; Interlock- NoCompl-
>		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
>			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
>			Changed: MRL- PresDet- LinkState-
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
>		Address: fee0300c  Data: 41d1
>	Capabilities: [90] Subsystem: Mitac Unknown device 8224
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: pcieport-driver
>
>00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
>	I/O behind bridge: 00004000-00004fff
>	Memory behind bridge: 6a200000-6b2fffff
>	Prefetchable memory behind bridge: 0000000065100000-00000000660fffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
>			ExtTag- RBE- FLReset-
>		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
>			ClockPM- Suprise- LLActRep+ BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
>			Slot #  1, PowerLimit 6.500000; Interlock- NoCompl-
>		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
>			Changed: MRL- PresDet+ LinkState+
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
>		Address: fee0300c  Data: 41d9
>	Capabilities: [90] Subsystem: Mitac Unknown device 8224
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: pcieport-driver
>
>00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
>	I/O behind bridge: 00003000-00003fff
>	Memory behind bridge: 69200000-6a1fffff
>	Prefetchable memory behind bridge: 0000000066100000-00000000670fffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
>			ExtTag- RBE- FLReset-
>		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
>			ClockPM- Suprise- LLActRep+ BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
>			Slot #  2, PowerLimit 6.500000; Interlock- NoCompl-
>		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
>			Changed: MRL- PresDet- LinkState-
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
>		Address: fee0300c  Data: 41e1
>	Capabilities: [90] Subsystem: Mitac Unknown device 8224
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: pcieport-driver
>
>00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
>	I/O behind bridge: 00002000-00002fff
>	Memory behind bridge: 68100000-691fffff
>	Prefetchable memory behind bridge: 0000000067100000-00000000680fffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
>			ExtTag- RBE- FLReset-
>		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
>			ClockPM- Suprise- LLActRep+ BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
>			Slot #  0, PowerLimit 6.500000; Interlock- NoCompl-
>		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
>			Changed: MRL- PresDet+ LinkState+
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
>		Address: fee0300c  Data: 41e9
>	Capabilities: [90] Subsystem: Mitac Unknown device 8224
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: pcieport-driver
>
>00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
>	Subsystem: Mitac Unknown device 8224
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 20
>	Region 4: I/O ports at 7080 [size=32]
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>
>00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
>	Subsystem: Mitac Unknown device 8224
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 17
>	Region 4: I/O ports at 7060 [size=32]
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>
>00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
>	Subsystem: Mitac Unknown device 8224
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin C routed to IRQ 18
>	Region 4: I/O ports at 7040 [size=32]
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>
>00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
>	Subsystem: Mitac Unknown device 8224
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin D routed to IRQ 19
>	Region 4: I/O ports at 7020 [size=32]
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>
>00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
>	Subsystem: Mitac Unknown device 8224
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 20
>	Region 0: Memory at 6c404400 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Debug port: BAR=1 offset=00a0
>	Kernel driver in use: ehci_hcd
>	Kernel modules: ehci-hcd
>
>00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Bus: primary=00, secondary=06, subordinate=0a, sec-latency=32
>	I/O behind bridge: 00001000-00001fff
>	Memory behind bridge: 62000000-640fffff
>	Prefetchable memory behind bridge: 0000000060000000-0000000061ffffff
>	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [50] Subsystem: Mitac Unknown device 8224
>
>00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
>	Subsystem: Mitac Unknown device 8224
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Capabilities: [e0] Vendor Specific Information <?>
>	Kernel modules: intel-rng, iTCO_wdt
>
>00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02) (prog-if 80 [Master])
>	Subsystem: Mitac Unknown device 8224
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 17
>	Region 0: I/O ports at 01f0 [size=8]
>	Region 1: I/O ports at 03f4 [size=1]
>	Region 2: I/O ports at 0170 [size=8]
>	Region 3: I/O ports at 0374 [size=1]
>	Region 4: I/O ports at 70a0 [size=16]
>	Capabilities: [70] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: ata_piix
>	Kernel modules: ata_piix
>
>00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
>	Subsystem: Mitac Unknown device 8224
>	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Interrupt: pin B routed to IRQ 17
>	Region 4: I/O ports at 7000 [size=32]
>	Kernel driver in use: i801_smbus
>	Kernel modules: i2c-i801
>
>01:00.0 VGA compatible controller: ATI Technologies Inc M56P [Radeon Mobility X1600] (prog-if 00 [VGA controller])
>	Subsystem: Mitac Unknown device 8224
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 16
>	Region 0: Memory at 50000000 (32-bit, prefetchable) [size=256M]
>	Region 1: I/O ports at 6000 [size=256]
>	Region 2: Memory at 6c300000 (32-bit, non-prefetchable) [size=64K]
>	Expansion ROM at 6c320000 [disabled] [size=128K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Express (v1) Legacy Endpoint, MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
>			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>		LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
>			ClockPM- Suprise- LLActRep- BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>
>03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
>	Subsystem: Intel Corporation Unknown device 1001
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 218
>	Region 0: Memory at 6a200000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [c8] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
>		Address: 00000000fee0300c  Data: 413a
>	Capabilities: [e0] Express (v1) Legacy Endpoint, MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
>			ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
>		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <64us
>			ClockPM+ Suprise- LLActRep- BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>	Kernel driver in use: iwl3945
>	Kernel modules: iwl3945
>
>05:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5789 Gigabit Ethernet PCI Express (rev 21)
>	Subsystem: Mitac Unknown device 8224
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 217
>	Region 0: Memory at 68100000 (64-bit, non-prefetchable) [size=64K]
>	Expansion ROM at <ignored> [disabled]
>	Capabilities: [48] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
>	Capabilities: [50] Vital Product Data <?>
>	Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable+
>		Address: 00000000fee0300c  Data: 414a
>	Capabilities: [d0] Express (v1) Endpoint, MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
>			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 4096 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <64us
>			ClockPM- Suprise- LLActRep- BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>	Kernel driver in use: tg3
>	Kernel modules: tg3
>
>06:05.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
>	Subsystem: Mitac Unknown device 8224
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 168, Cache Line Size: 128 bytes
>	Interrupt: pin A routed to IRQ 16
>	Region 0: Memory at 64005000 (32-bit, non-prefetchable) [size=4K]
>	Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176
>	Memory window 0: 70000000-73fff000 (prefetchable)
>	Memory window 1: 74000000-77fff000
>	I/O window 0: 00001000-000010ff
>	I/O window 1: 00001400-000014ff
>	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
>	16-bit legacy interface ports at 0001
>	Kernel driver in use: yenta_cardbus
>
>06:05.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller (prog-if 10 [OHCI])
>	Subsystem: Mitac Unknown device 8224
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64 (500ns min, 1000ns max)
>	Interrupt: pin B routed to IRQ 17
>	Region 0: Memory at 64006000 (32-bit, non-prefetchable) [size=2K]
>	Region 1: Memory at 64000000 (32-bit, non-prefetchable) [size=16K]
>	Capabilities: [44] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME+
>	Kernel driver in use: firewire_ohci
>	Kernel modules: firewire-ohci
>
>06:05.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
>	Subsystem: Mitac Unknown device 8224
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64 (1750ns min, 1000ns max)
>	Interrupt: pin A routed to IRQ 16
>	Region 0: Memory at 64004000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [44] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: tifm_7xx1
>	Kernel modules: tifm_7xx1
>
>06:05.3 SD Host controller: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller
>	Subsystem: Mitac Unknown device 8224
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0 (1750ns min, 1000ns max)
>	Interrupt: pin A routed to IRQ 16
>	Region 0: Memory at 64006800 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: sdhci
>	Kernel modules: sdhci
>

Actions: View

Attachments on bug 300931: 204801 | 294516 | 294517