Attachment 294568 Details for Bug 432355 – dmesg from my boot

dmesg from my boot

dmesg (text/plain), 20.60 KB, created by Stepan Kasal on 2008-02-11 15:20:43 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Stepan Kasal

Created: 2008-02-11 15:20:43 UTC

Size: 20.60 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.24.1-26.fc9 (mockbuild@) (gcc version 4.3.0 20080130 (Red Hat 4.3.0-0.7) (GCC) ) #1 SMP Fri Feb 8 19:56:42 EST 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
> BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
> BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>511MB LOWMEM available.
>found SMP MP-table at 000fb930
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 131056) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   131056
>  HighMem    131056 ->   131056
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   131056
>On node 0 totalpages: 131056
>  DMA zone: 56 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4040 pages, LIFO batch:0
>  Normal zone: 1735 pages used for memmap
>  Normal zone: 125225 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000FA940, 0014 (r0 AMI   )
>ACPI: RSDT 1FFF0000, 002C (r1 AMIINT VIA_K7         10 MSFT       97)
>ACPI: FACP 1FFF0030, 0081 (r1 AMIINT VIA_K7         11 MSFT       97)
>ACPI: DSDT 1FFF0120, 32BF (r1    VIA   VIA_K7     1000 MSFT  100000D)
>ACPI: FACS 1FFF8000, 0040
>ACPI: APIC 1FFF00C0, 0054 (r1 AMIINT VIA_K7          9 MSFT       97)
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:8 APIC version 16
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129265
>Kernel command line: ro root=LABEL=root-f8
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0826000 soft=c0806000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Detected 1533.377 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1024 kB
> per task-struct memory footprint: 1680 bytes
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 506068k/524224k available (2335k kernel code, 17540k reserved, 1170k data, 580k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xe0800000 - 0xff7fe000   ( 495 MB)
>    lowmem  : 0xc0000000 - 0xdfff0000   ( 511 MB)
>      .init : 0xc0772000 - 0xc0803000   ( 580 kB)
>      .data : 0xc0647d6d - 0xc076c75c   (1170 kB)
>      .text : 0xc0400000 - 0xc0647d6d   (2335 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 3070.35 BogoMIPS (lpj=1535175)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 256K (64 bytes/line)
>CPU: After all inits, caps: 0383f3ff c1c3fbff 00000000 00000420 00000000 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>ACPI: Core revision 20070126
>CPU0: AMD Athlon(tm) XP 1800+ stepping 01
>Total of 1 processors activated (3070.35 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=608 bytes
>sizeof(dentry)=160 bytes
>sizeof(ext3inode)=860 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=3552 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000001
>  groups: 00000001
>khelper used greatest stack depth: 2924 bytes left
>net_namespace: 80 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 14:32:14  Date: 02/11/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>khelper used greatest stack depth: 2624 bytes left
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 0800-087f claimed by vt8235 PM
>PCI quirk: region 0400-040f claimed by vt8235 SMB
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: Power Resource [URP1] (off)
>ACPI: Power Resource [URP2] (off)
>ACPI: Power Resource [FDDP] (off)
>ACPI: Power Resource [LPTP] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>ACPI: RTC can wake from S4
>Time: tsc clocksource has been installed.
>system 00:01: ioport range 0x290-0x297 has been reserved
>system 00:01: ioport range 0x3f0-0x3f1 has been reserved
>system 00:01: ioport range 0x4d0-0x4d1 has been reserved
>system 00:01: ioport range 0x400-0x40f has been reserved
>system 00:01: ioport range 0x800-0x87f has been reserved
>system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: dee00000-dfefffff
>  PREFETCH window: dad00000-decfffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 16384 (order: 7, 589824 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2602k freed
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1202740334.656:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>khelper used greatest stack depth: 2616 bytes left
>io scheduler cfq registered (default)
>PCI: VIA PCI bridge detected. Disabling DAC.
>Boot video device is 0000:01:00.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>khelper used greatest stack depth: 2440 bytes left
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>agpgart: Detected VIA KT400/KT400A/KT600 chipset
>agpgart: AGP aperture is 128M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Processor cpuid 681 not supported
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 12:761:535
>Freeing unused kernel memory: 580k freed
>Write protecting the kernel read-only data: 916k
>ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 16
>ehci_hcd 0000:00:10.3: EHCI Host Controller
>ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:10.3: irq 16, io mem 0xdfffff00
>ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>modprobe used greatest stack depth: 1920 bytes left
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 16
>uhci_hcd 0000:00:10.0: UHCI Host Controller
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:10.0: irq 16, io base 0x0000e000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 16
>uhci_hcd 0000:00:10.1: UHCI Host Controller
>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:10.1: irq 16, io base 0x0000e400
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 16
>uhci_hcd 0000:00:10.2: UHCI Host Controller
>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:10.2: irq 16, io base 0x0000e800
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>input: PS/2 Logitech Mouse as /devices/platform/i8042/serio1/input/input2
>libata version 3.00 loaded.
>pata_via 0000:00:11.1: version 0.3.3
>ACPI: Unable to derive IRQ for device 0000:00:11.1
>scsi0 : pata_via
>scsi1 : pata_via
>ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
>ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
>ata1.00: ATA-7: WDC WD2500JB-55REA0, 20.00K20, max UDMA/100
>ata1.00: 488397168 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>ata2.00: ATAPI: TOSHIBA DVD-ROM SD-M1712, 1004, max UDMA/33
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500JB-55R 20.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            TOSHIBA  DVD-ROM SD-M1712 1004 PQ: 0 ANSI: 5
>modprobe used greatest stack depth: 672 bytes left
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:8192 avtab hash slots allocated.Num of rules:161936
>SELinux:8192 avtab hash slots allocated.Num of rules:161936
>security:  8 users, 12 roles, 2201 types, 108 bools, 1 sens, 1024 cats
>security:  68 classes, 161936 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda3, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>audit(1202740345.958:2): policy loaded auid=4294967295
>audit(1202740346.415:3): avc:  denied  { getattr } for  pid=462 comm="rc.fbcon" path="/sbin/modprobe" dev=sda3 ino=2861627 scontext=system_u:system_r:init_t:s0 tcontext=system_u:object_r:insmod_exec_t:s0 tclass=file
>audit(1202740346.416:4): avc:  denied  { execute } for  pid=462 comm="rc.fbcon" name="modprobe" dev=sda3 ino=2861627 scontext=system_u:system_r:init_t:s0 tcontext=system_u:object_r:insmod_exec_t:s0 tclass=file
>audit(1202740346.416:5): avc:  denied  { read } for  pid=462 comm="rc.fbcon" name="modprobe" dev=sda3 ino=2861627 scontext=system_u:system_r:init_t:s0 tcontext=system_u:object_r:insmod_exec_t:s0 tclass=file
>audit(1202740346.417:6): avc:  denied  { execute_no_trans } for  pid=463 comm="rc.fbcon" path="/sbin/modprobe" dev=sda3 ino=2861627 scontext=system_u:system_r:init_t:s0 tcontext=system_u:object_r:insmod_exec_t:s0 tclass=file
>audit(1202740346.443:7): avc:  denied  { read } for  pid=463 comm="modprobe" name="modprobe.conf" dev=sda3 ino=2600187 scontext=system_u:system_r:init_t:s0 tcontext=system_u:object_r:modules_conf_t:s0 tclass=file
>audit(1202740346.443:8): avc:  denied  { getattr } for  pid=463 comm="modprobe" path="/etc/modprobe.conf" dev=sda3 ino=2600187 scontext=system_u:system_r:init_t:s0 tcontext=system_u:object_r:modules_conf_t:s0 tclass=file
>audit(1202740346.511:9): avc:  denied  { search } for  pid=463 comm="modprobe" name="modules" dev=sda3 ino=3499544 scontext=system_u:system_r:init_t:s0 tcontext=system_u:object_r:modules_object_t:s0 tclass=dir
>audit(1202740346.550:10): avc:  denied  { read } for  pid=463 comm="modprobe" name="modules.dep" dev=sda3 ino=3581378 scontext=system_u:system_r:init_t:s0 tcontext=root:object_r:modules_dep_t:s0 tclass=file
>audit(1202740346.550:11): avc:  denied  { getattr } for  pid=463 comm="modprobe" path="/lib/modules/2.6.24.1-26.fc9/modules.dep" dev=sda3 ino=3581378 scontext=system_u:system_r:init_t:s0 tcontext=root:object_r:modules_dep_t:s0 tclass=file
>audit(1202740346.620:12): avc:  denied  { read } for  pid=463 comm="modprobe" name="matroxfb_misc.ko" dev=sda3 ino=279204 scontext=system_u:system_r:init_t:s0 tcontext=system_u:object_r:modules_object_t:s0 tclass=file
>audit(1202740346.620:13): avc:  denied  { getattr } for  pid=463 comm="modprobe" path="/lib/modules/2.6.24.1-26.fc9/kernel/drivers/video/matrox/matroxfb_misc.ko" dev=sda3 ino=279204 scontext=system_u:system_r:init_t:s0 tcontext=system_u:object_r:modules_object_t:s0 tclass=file
>audit(1202740346.623:14): avc:  denied  { sys_module } for  pid=463 comm="modprobe" capability=16 scontext=system_u:system_r:init_t:s0 tcontext=system_u:system_r:init_t:s0 tclass=capability
>audit(1202740346.631:15): avc:  denied  { setsched } for  pid=463 comm="modprobe" scontext=system_u:system_r:init_t:s0 tcontext=system_u:system_r:kernel_t:s0 tclass=process
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17
>matroxfb: Matrox G550 detected
>PInS memtype = 5
>matroxfb: MTRR's turned on
>matroxfb: 640x480x8bpp (virtual: 640x26214)
>matroxfb: framebuffer at 0xDC000000, mapped to 0xe0980000, size 33554432
>fbcon: MATROX (fb0) is primary device
>Console: switching to mono frame buffer device 80x30
>fb0: MATROX frame buffer device
>matroxfb_crtc2: secondary head of fb0 was registered as fb1
>audit(1202740346.718:16): avc:  denied  { create } for  pid=472 comm="mknod" name="fb0" scontext=system_u:system_r:init_t:s0 tcontext=system_u:object_r:tmpfs_t:s0 tclass=chr_file
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>input: Power Button (FF) as /devices/virtual/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/virtual/input/input4
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /devices/virtual/input/input5
>ACPI: Sleep Button (CM) [SLPB]
>ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
>ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 18
>eth0: RealTek RTL-8029 found at 0xec00, IRQ 18, 00:00:b4:9f:73:96.
>NET: Registered protocol family 23
>via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 19
>eth1: VIA Rhine II at 0xdffffe00, 00:0c:76:59:79:fd, IRQ 19.
>eth1: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
>input: PC Speaker as /devices/platform/pcspkr/input/input6
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>parport_pc 00:0b: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
>ALSA sound/pci/via82xx.c:2404: via82xx: DXS white list for MSI KT4V found
>ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:11.5 to 64
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
>EXT3 FS on sda3, internal journal
>SELinux: initialized (dev sda1, type ext2), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda5, type ext3), uses xattr
>Adding 987988k swap on /dev/sda2.  Priority:-1 extents:1 across:987988k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts

Actions: View

Attachments on bug 432355: 294568