Attachment 294717 Details for Bug 366111 – aditional log with different options ..

aditional log with different options ..

wlan-problem-3.txt (text/plain), 31.19 KB, created by Sven Oehme on 2008-02-13 01:00:26 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Sven Oehme

Created: 2008-02-13 01:00:26 UTC

Size: 31.19 KB

patch

obsolete

>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.23kds
>iwl3945: Copyright(c) 2003-2007 Intel Corporation
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>iwl3945: U iwl3945_pci_probe pci_resource_len = 0x00001000
>iwl3945: U iwl3945_pci_probe pci_resource_base = ffffc20000662000
>iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>iwl3945: U iwl3945_set_rxon_channel Staging channel set to 6 [2]
>iwl3945: U iwl3945_pci_probe MAC address: 00:1b:77:6d:eb:07
>iwl3945: U iwl3945_init_channel_map Initializing regulatory info from EEPROM
>iwl3945: U iwl3945_init_channel_map Parsing data for 56 channels.
>iwl3945: U iwl3945_init_channel_map Ch. 1 [2.4GHz] IBSS ACTIVE WIDE (0x2b 15dBm): Ad-Hoc supported
>iwl3945: U iwl3945_init_channel_map Ch. 2 [2.4GHz] IBSS ACTIVE WIDE (0x2b 15dBm): Ad-Hoc supported
>iwl3945: U iwl3945_init_channel_map Ch. 3 [2.4GHz] IBSS ACTIVE WIDE (0x2b 15dBm): Ad-Hoc supported
>iwl3945: U iwl3945_init_channel_map Ch. 4 [2.4GHz] IBSS ACTIVE WIDE (0x2b 15dBm): Ad-Hoc supported
>iwl3945: U iwl3945_init_channel_map Ch. 5 [2.4GHz] IBSS ACTIVE WIDE (0x2b 15dBm): Ad-Hoc supported
>iwl3945: U iwl3945_init_channel_map Ch. 6 [2.4GHz] IBSS ACTIVE WIDE (0x2b 15dBm): Ad-Hoc supported
>iwl3945: U iwl3945_init_channel_map Ch. 7 [2.4GHz] IBSS ACTIVE WIDE (0x2b 15dBm): Ad-Hoc supported
>iwl3945: U iwl3945_init_channel_map Ch. 8 [2.4GHz] IBSS ACTIVE WIDE (0x2b 15dBm): Ad-Hoc supported
>iwl3945: U iwl3945_init_channel_map Ch. 9 [2.4GHz] IBSS ACTIVE WIDE (0x2b 15dBm): Ad-Hoc supported
>iwl3945: U iwl3945_init_channel_map Ch. 10 [2.4GHz] IBSS ACTIVE WIDE (0x2b 15dBm): Ad-Hoc supported
>iwl3945: U iwl3945_init_channel_map Ch. 11 [2.4GHz] IBSS ACTIVE WIDE (0x2b 15dBm): Ad-Hoc supported
>iwl3945: U iwl3945_init_channel_map Ch. 12 [2.4GHz] WIDE (0x21 15dBm): Ad-Hoc not supported
>iwl3945: U iwl3945_init_channel_map Ch. 13 [2.4GHz] WIDE (0x21 15dBm): Ad-Hoc not supported
>iwl3945: U iwl3945_init_channel_map Ch. 14 Flags 0 [2.4GHz] - No traffic
>iwl3945: U iwl3945_init_channel_map Ch. 183 Flags 0 [5.2GHz] - No traffic
>iwl3945: U iwl3945_init_channel_map Ch. 184 Flags 0 [5.2GHz] - No traffic
>iwl3945: U iwl3945_init_channel_map Ch. 185 Flags 0 [5.2GHz] - No traffic
>iwl3945: U iwl3945_init_channel_map Ch. 187 Flags 0 [5.2GHz] - No traffic
>iwl3945: U iwl3945_init_channel_map Ch. 188 Flags 0 [5.2GHz] - No traffic
>iwl3945: U iwl3945_init_channel_map Ch. 189 Flags 0 [5.2GHz] - No traffic
>iwl3945: U iwl3945_init_channel_map Ch. 192 Flags 0 [5.2GHz] - No traffic
>iwl3945: U iwl3945_init_channel_map Ch. 196 Flags 0 [5.2GHz] - No traffic
>iwl3945: U iwl3945_init_channel_map Ch. 7 Flags 0 [5.2GHz] - No traffic
>iwl3945: U iwl3945_init_channel_map Ch. 8 Flags 0 [5.2GHz] - No traffic
>iwl3945: U iwl3945_init_channel_map Ch. 11 Flags 0 [5.2GHz] - No traffic
>iwl3945: U iwl3945_init_channel_map Ch. 12 Flags 0 [5.2GHz] - No traffic
>iwl3945: U iwl3945_init_channel_map Ch. 16 Flags 0 [5.2GHz] - No traffic
>iwl3945: U iwl3945_init_channel_map Ch. 34 [5.2GHz] WIDE (0x21 15dBm): Ad-Hoc not supported
>iwl3945: U iwl3945_init_channel_map Ch. 36 [5.2GHz] IBSS ACTIVE WIDE DFS (0xab 15dBm): Ad-Hoc supported
>iwl3945: U iwl3945_init_channel_map Ch. 38 [5.2GHz] WIDE (0x21 15dBm): Ad-Hoc not supported
>iwl3945: U iwl3945_init_channel_map Ch. 40 [5.2GHz] IBSS ACTIVE WIDE DFS (0xab 15dBm): Ad-Hoc supported
>iwl3945: U iwl3945_init_channel_map Ch. 42 [5.2GHz] WIDE (0x21 15dBm): Ad-Hoc not supported
>iwl3945: U iwl3945_init_channel_map Ch. 44 [5.2GHz] IBSS ACTIVE WIDE DFS (0xab 15dBm): Ad-Hoc supported
>iwl3945: U iwl3945_init_channel_map Ch. 46 [5.2GHz] WIDE (0x21 15dBm): Ad-Hoc not supported
>iwl3945: U iwl3945_init_channel_map Ch. 48 [5.2GHz] IBSS ACTIVE WIDE DFS (0xab 15dBm): Ad-Hoc supported
>iwl3945: U iwl3945_init_channel_map Ch. 52 [5.2GHz] RADAR WIDE DFS (0xb1 15dBm): Ad-Hoc not supported
>iwl3945: U iwl3945_init_channel_map Ch. 56 [5.2GHz] RADAR WIDE DFS (0xb1 15dBm): Ad-Hoc not supported
>iwl3945: U iwl3945_init_channel_map Ch. 60 [5.2GHz] RADAR WIDE DFS (0xb1 15dBm): Ad-Hoc not supported
>iwl3945: U iwl3945_init_channel_map Ch. 64 [5.2GHz] RADAR WIDE DFS (0xb1 15dBm): Ad-Hoc not supported
>iwl3945: U iwl3945_init_channel_map Ch. 100 [5.2GHz] RADAR WIDE DFS (0xb1 16dBm): Ad-Hoc not supported
>iwl3945: U iwl3945_init_channel_map Ch. 104 [5.2GHz] RADAR WIDE DFS (0xb1 16dBm): Ad-Hoc not supported
>iwl3945: U iwl3945_init_channel_map Ch. 108 [5.2GHz] RADAR WIDE DFS (0xb1 16dBm): Ad-Hoc not supported
>iwl3945: U iwl3945_init_channel_map Ch. 112 [5.2GHz] RADAR WIDE DFS (0xb1 16dBm): Ad-Hoc not supported
>iwl3945: U iwl3945_init_channel_map Ch. 116 [5.2GHz] RADAR WIDE DFS (0xb1 16dBm): Ad-Hoc not supported
>iwl3945: U iwl3945_init_channel_map Ch. 120 [5.2GHz] RADAR WIDE DFS (0xb1 16dBm): Ad-Hoc not supported
>iwl3945: U iwl3945_init_channel_map Ch. 124 [5.2GHz] RADAR WIDE DFS (0xb1 16dBm): Ad-Hoc not supported
>iwl3945: U iwl3945_init_channel_map Ch. 128 [5.2GHz] RADAR WIDE DFS (0xb1 16dBm): Ad-Hoc not supported
>iwl3945: U iwl3945_init_channel_map Ch. 132 [5.2GHz] RADAR WIDE DFS (0xb1 16dBm): Ad-Hoc not supported
>iwl3945: U iwl3945_init_channel_map Ch. 136 [5.2GHz] RADAR WIDE DFS (0xb1 16dBm): Ad-Hoc not supported
>iwl3945: U iwl3945_init_channel_map Ch. 140 [5.2GHz] RADAR WIDE DFS (0xb1 16dBm): Ad-Hoc not supported
>iwl3945: U iwl3945_init_channel_map Ch. 145 Flags 0 [5.2GHz] - No traffic
>iwl3945: U iwl3945_init_channel_map Ch. 149 Flags 0 [5.2GHz] - No traffic
>iwl3945: U iwl3945_init_channel_map Ch. 153 Flags 0 [5.2GHz] - No traffic
>iwl3945: U iwl3945_init_channel_map Ch. 157 Flags 0 [5.2GHz] - No traffic
>iwl3945: U iwl3945_init_channel_map Ch. 161 Flags 0 [5.2GHz] - No traffic
>iwl3945: U iwl3945_init_channel_map Ch. 165 Flags 0 [5.2GHz] - No traffic
>iwl3945: U iwl3945_hw_reg_txpower_get_temperature Temperature: 260
>iwl3945: U iwl3945_init_geos Channel 14 [2.4GHz] is restricted -- skipping.
>iwl3945: U iwl3945_init_geos Channel 183 [5.2GHz] is restricted -- skipping.
>iwl3945: U iwl3945_init_geos Channel 184 [5.2GHz] is restricted -- skipping.
>iwl3945: U iwl3945_init_geos Channel 185 [5.2GHz] is restricted -- skipping.
>iwl3945: U iwl3945_init_geos Channel 187 [5.2GHz] is restricted -- skipping.
>iwl3945: U iwl3945_init_geos Channel 188 [5.2GHz] is restricted -- skipping.
>iwl3945: U iwl3945_init_geos Channel 189 [5.2GHz] is restricted -- skipping.
>iwl3945: U iwl3945_init_geos Channel 192 [5.2GHz] is restricted -- skipping.
>iwl3945: U iwl3945_init_geos Channel 196 [5.2GHz] is restricted -- skipping.
>iwl3945: U iwl3945_init_geos Channel 7 [5.2GHz] is restricted -- skipping.
>iwl3945: U iwl3945_init_geos Channel 8 [5.2GHz] is restricted -- skipping.
>iwl3945: U iwl3945_init_geos Channel 11 [5.2GHz] is restricted -- skipping.
>iwl3945: U iwl3945_init_geos Channel 12 [5.2GHz] is restricted -- skipping.
>iwl3945: U iwl3945_init_geos Channel 16 [5.2GHz] is restricted -- skipping.
>iwl3945: U iwl3945_init_geos Channel 145 [5.2GHz] is restricted -- skipping.
>iwl3945: U iwl3945_init_geos Channel 149 [5.2GHz] is restricted -- skipping.
>iwl3945: U iwl3945_init_geos Channel 153 [5.2GHz] is restricted -- skipping.
>iwl3945: U iwl3945_init_geos Channel 157 [5.2GHz] is restricted -- skipping.
>iwl3945: U iwl3945_init_geos Channel 161 [5.2GHz] is restricted -- skipping.
>iwl3945: U iwl3945_init_geos Channel 165 [5.2GHz] is restricted -- skipping.
>iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
>phy3: Selected rate control algorithm 'iwl-3945-rs'
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>iwl3945: U iwl3945_read_ucode Got firmware 'iwlwifi-3945-1.ucode' file (149652 bytes) from disk
>iwl3945: U iwl3945_read_ucode f/w package hdr ucode version = 0x20e0105
>iwl3945: U iwl3945_read_ucode f/w package hdr runtime inst size = 80524
>iwl3945: U iwl3945_read_ucode f/w package hdr runtime data size = 32768
>iwl3945: U iwl3945_read_ucode f/w package hdr init inst size = 2668
>iwl3945: U iwl3945_read_ucode f/w package hdr init data size = 32768
>iwl3945: U iwl3945_read_ucode f/w package hdr boot inst size = 900
>iwl3945: U iwl3945_read_ucode Copying (but not loading) uCode instr len 80524
>iwl3945: U iwl3945_read_ucode uCode instr buf vaddr = 0xffff8100b35c0000, paddr = 0xb35c0000
>iwl3945: U iwl3945_read_ucode Copying (but not loading) uCode data len 32768
>iwl3945: U iwl3945_read_ucode Copying (but not loading) init instr len 2668
>iwl3945: U iwl3945_read_ucode Copying (but not loading) init data len 32768
>iwl3945: U iwl3945_read_ucode Copying (but not loading) boot instr len 900
>iwl3945: U iwl3945_hw_nic_init HW Revision ID = 0x2
>iwl3945: U iwl3945_hw_nic_init ALM-MM type
>iwl3945: U iwl3945_hw_nic_init SKU OP mode is basic
>iwl3945: U iwl3945_hw_nic_init 3945ABG revision is 0xF1
>iwl3945: U iwl3945_hw_nic_init Card M type B version is 0x2
>iwl3945: U iwl3945_load_bsm Begin load bsm
>iwl3945: U iwl3945_verify_bsm Begin verify bsm
>iwl3945: U iwl3945_verify_bsm BSM bootstrap uCode image OK
>iwl3945: U iwl3945_load_bsm BSM write complete, poll 1 iterations
>iwl3945: U __iwl3945_up iwl3945 is coming up
>iwl3945: U iwl3945_mac_start Start UP work.
>iwl3945: I iwl3945_rx_reply_alive Alive ucode status 0x00000001 revision 0x1 0x9
>iwl3945: I iwl3945_rx_reply_alive Initialization Alive received.
>iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 900
>iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 2668
>iwl3945: U iwl3945_verify_ucode Initialize uCode is good in inst SRAM
>iwl3945: U iwl3945_init_alive_start Initialization Alive received.
>iwl3945: U iwl3945_set_ucode_ptrs Runtime uCode pointers are set.
>iwl3945: I iwl3945_rx_reply_alive Alive ucode status 0x00000001 revision 0x1 0x0
>iwl3945: I iwl3945_rx_reply_alive Runtime Alive received.
>iwl3945: I iwl3945_disable_events Selected uCode log events may be disabled
>iwl3945: I iwl3945_disable_events   by writing "1"s into disable bitmap
>iwl3945: I iwl3945_disable_events   in SRAM at 0x8015f4, size 47 u32s
>iwl3945: U iwl3945_alive_start Runtime Alive received.
>iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 900
>iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 2668
>iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 80524
>iwl3945: U iwl3945_verify_ucode Runtime uCode is good in inst SRAM
>iwl3945: U iwl3945_alive_start RFKILL status: 0x1
>iwl3945: U iwl3945_commit_rxon Sending RXON
>* without RXON_FILTER_ASSOC_MSK
>* channel = 1
>* bssid = 00:00:00:00:00:00
>iwl3945: U iwl3945_add_station Add STA ID 24: ff:ff:ff:ff:ff:ff
>iwl3945: U iwl3945_send_add_station REPLY_ADD_STA PASSED
>iwl3945: U iwl3945_hw_reg_txpower_get_temperature Temperature: 110
>iwl3945: U iwl3945_alive_start ALIVE processing complete.
>iwl3945: U iwl3945_commit_rxon Sending RXON
>* without RXON_FILTER_ASSOC_MSK
>* channel = 1
>* bssid = 00:00:00:00:00:00
>iwl3945: U iwl3945_add_station Add STA ID 24: ff:ff:ff:ff:ff:ff
>iwl3945: U iwl3945_send_add_station REPLY_ADD_STA PASSED
>iwl3945: U iwl3945_commit_rxon Sending RXON
>* without RXON_FILTER_ASSOC_MSK
>* channel = 1
>* bssid = 00:00:00:00:00:00
>iwl3945: U iwl3945_add_station Add STA ID 24: ff:ff:ff:ff:ff:ff
>iwl3945: U iwl3945_send_add_station REPLY_ADD_STA PASSED
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>iwl3945: U iwl3945_commit_rxon Sending RXON
>* without RXON_FILTER_ASSOC_MSK
>* channel = 1
>* bssid = 00:00:00:00:00:00
>iwl3945: U iwl3945_add_station Add STA ID 24: ff:ff:ff:ff:ff:ff
>iwl3945: U iwl3945_send_add_station REPLY_ADD_STA PASSED
>iwl3945: U iwl3945_set_rxon_channel Staging channel set to 2 [2]
>iwl3945: U iwl3945_commit_rxon Sending RXON
>* without RXON_FILTER_ASSOC_MSK
>* channel = 2
>* bssid = 00:00:00:00:00:00
>iwl3945: U iwl3945_add_station Add STA ID 24: ff:ff:ff:ff:ff:ff
>iwl3945: U iwl3945_send_add_station REPLY_ADD_STA PASSED
>iwl3945: U iwl3945_set_rxon_channel Staging channel set to 3 [2]
>iwl3945: U iwl3945_commit_rxon Sending RXON
>* without RXON_FILTER_ASSOC_MSK
>* channel = 3
>* bssid = 00:00:00:00:00:00
>iwl3945: U iwl3945_add_station Add STA ID 24: ff:ff:ff:ff:ff:ff
>iwl3945: U iwl3945_send_add_station REPLY_ADD_STA PASSED
>iwl3945: U iwl3945_set_rxon_channel Staging channel set to 4 [2]
>iwl3945: U iwl3945_commit_rxon Sending RXON
>* without RXON_FILTER_ASSOC_MSK
>* channel = 4
>* bssid = 00:00:00:00:00:00
>iwl3945: U iwl3945_add_station Add STA ID 24: ff:ff:ff:ff:ff:ff
>iwl3945: U iwl3945_send_add_station REPLY_ADD_STA PASSED
>iwl3945: U iwl3945_set_rxon_channel Staging channel set to 5 [2]
>iwl3945: U iwl3945_commit_rxon Sending RXON
>* without RXON_FILTER_ASSOC_MSK
>* channel = 5
>* bssid = 00:00:00:00:00:00
>iwl3945: U iwl3945_add_station Add STA ID 24: ff:ff:ff:ff:ff:ff
>iwl3945: U iwl3945_send_add_station REPLY_ADD_STA PASSED
>iwl3945: U iwl3945_set_rxon_channel Staging channel set to 6 [2]
>iwl3945: U iwl3945_commit_rxon Sending RXON
>* without RXON_FILTER_ASSOC_MSK
>* channel = 6
>* bssid = 00:00:00:00:00:00
>iwl3945: U iwl3945_add_station Add STA ID 24: ff:ff:ff:ff:ff:ff
>iwl3945: U iwl3945_send_add_station REPLY_ADD_STA PASSED
>iwl3945: U iwl3945_set_rxon_channel Staging channel set to 7 [2]
>iwl3945: U iwl3945_commit_rxon Sending RXON
>* without RXON_FILTER_ASSOC_MSK
>* channel = 7
>* bssid = 00:00:00:00:00:00
>iwl3945: U iwl3945_add_station Add STA ID 24: ff:ff:ff:ff:ff:ff
>iwl3945: U iwl3945_send_add_station REPLY_ADD_STA PASSED
>iwl3945: U iwl3945_set_rxon_channel Staging channel set to 8 [2]
>iwl3945: U iwl3945_commit_rxon Sending RXON
>* without RXON_FILTER_ASSOC_MSK
>* channel = 8
>* bssid = 00:00:00:00:00:00
>iwl3945: U iwl3945_add_station Add STA ID 24: ff:ff:ff:ff:ff:ff
>iwl3945: U iwl3945_send_add_station REPLY_ADD_STA PASSED
>iwl3945: U iwl3945_set_rxon_channel Staging channel set to 9 [2]
>iwl3945: U iwl3945_commit_rxon Sending RXON
>* without RXON_FILTER_ASSOC_MSK
>* channel = 9
>* bssid = 00:00:00:00:00:00
>iwl3945: U iwl3945_add_station Add STA ID 24: ff:ff:ff:ff:ff:ff
>iwl3945: U iwl3945_send_add_station REPLY_ADD_STA PASSED
>iwl3945: U iwl3945_set_rxon_channel Staging channel set to 10 [2]
>iwl3945: U iwl3945_commit_rxon Sending RXON
>* without RXON_FILTER_ASSOC_MSK
>* channel = 10
>* bssid = 00:00:00:00:00:00
>iwl3945: U iwl3945_add_station Add STA ID 24: ff:ff:ff:ff:ff:ff
>iwl3945: U iwl3945_send_add_station REPLY_ADD_STA PASSED
>iwl3945: U iwl3945_set_rxon_channel Staging channel set to 11 [2]
>iwl3945: U iwl3945_commit_rxon Sending RXON
>* without RXON_FILTER_ASSOC_MSK
>* channel = 11
>* bssid = 00:00:00:00:00:00
>iwl3945: U iwl3945_add_station Add STA ID 24: ff:ff:ff:ff:ff:ff
>iwl3945: U iwl3945_send_add_station REPLY_ADD_STA PASSED
>iwl3945: U iwl3945_set_rxon_channel Staging channel set to 12 [2]
>iwl3945: U iwl3945_commit_rxon Sending RXON
>* without RXON_FILTER_ASSOC_MSK
>* channel = 12
>* bssid = 00:00:00:00:00:00
>iwl3945: U iwl3945_add_station Add STA ID 24: ff:ff:ff:ff:ff:ff
>iwl3945: U iwl3945_send_add_station REPLY_ADD_STA PASSED
>iwl3945: U iwl3945_set_rxon_channel Staging channel set to 13 [2]
>iwl3945: U iwl3945_commit_rxon Sending RXON
>* without RXON_FILTER_ASSOC_MSK
>* channel = 13
>* bssid = 00:00:00:00:00:00
>iwl3945: U iwl3945_add_station Add STA ID 24: ff:ff:ff:ff:ff:ff
>iwl3945: U iwl3945_send_add_station REPLY_ADD_STA PASSED
>iwl3945: U iwl3945_set_rxon_channel Staging channel set to 34 [0]
>iwl3945: U iwl3945_commit_rxon Sending RXON
>* without RXON_FILTER_ASSOC_MSK
>* channel = 34
>* bssid = 00:00:00:00:00:00
>iwl3945: U iwl3945_add_station Add STA ID 24: ff:ff:ff:ff:ff:ff
>iwl3945: U iwl3945_send_add_station REPLY_ADD_STA PASSED
>iwl3945: U iwl3945_set_rxon_channel Staging channel set to 36 [0]
>iwl3945: U iwl3945_commit_rxon Sending RXON
>* without RXON_FILTER_ASSOC_MSK
>* channel = 36
>* bssid = 00:00:00:00:00:00
>iwl3945: U iwl3945_add_station Add STA ID 24: ff:ff:ff:ff:ff:ff
>iwl3945: U iwl3945_send_add_station REPLY_ADD_STA PASSED
>iwl3945: U iwl3945_set_rxon_channel Staging channel set to 38 [0]
>iwl3945: U iwl3945_commit_rxon Sending RXON
>* without RXON_FILTER_ASSOC_MSK
>* channel = 38
>* bssid = 00:00:00:00:00:00
>iwl3945: Microcode SW error detected.  Restarting 0x82000008.
>iwl3945: I iwl3945_irq_handle_error Restarting adapter due to uCode error.
>iwl3945: Error Reply type 0x00000005 cmd REPLY_TX (0x1C) seq 0x000B ser 0x0000004B
>iwl3945: U iwl3945_send_cmd_sync Command REPLY_RXON failed: FW Error
>iwl3945: Error setting new configuration (-5).
>iwl3945: U __iwl3945_down iwl3945 is going down
>iwl3945: Can't stop Rx DMA.
>iwl3945: U iwl3945_hw_nic_stop_master stop master
>iwl3945: U iwl3945_clear_free_frames 0 frames on pre-allocated heap on clear.
>iwl3945: U iwl3945_hw_nic_init HW Revision ID = 0x2
>iwl3945: U iwl3945_hw_nic_init ALM-MM type
>iwl3945: U iwl3945_hw_nic_init SKU OP mode is basic
>iwl3945: U iwl3945_hw_nic_init 3945ABG revision is 0xF1
>iwl3945: U iwl3945_hw_nic_init Card M type B version is 0x2
>iwl3945: U iwl3945_load_bsm Begin load bsm
>iwl3945: U iwl3945_verify_bsm Begin verify bsm
>iwl3945: U iwl3945_verify_bsm BSM bootstrap uCode image OK
>iwl3945: U iwl3945_load_bsm BSM write complete, poll 1 iterations
>iwl3945: U __iwl3945_up iwl3945 is coming up
>iwl3945: I iwl3945_rx_reply_alive Alive ucode status 0x00000001 revision 0x1 0x9
>iwl3945: I iwl3945_rx_reply_alive Initialization Alive received.
>iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 900
>iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 2668
>iwl3945: U iwl3945_verify_ucode Initialize uCode is good in inst SRAM
>iwl3945: U iwl3945_init_alive_start Initialization Alive received.
>iwl3945: U iwl3945_set_ucode_ptrs Runtime uCode pointers are set.
>iwl3945: I iwl3945_rx_reply_alive Alive ucode status 0x00000001 revision 0x1 0x0
>iwl3945: I iwl3945_rx_reply_alive Runtime Alive received.
>iwl3945: I iwl3945_disable_events Selected uCode log events may be disabled
>iwl3945: I iwl3945_disable_events   by writing "1"s into disable bitmap
>iwl3945: I iwl3945_disable_events   in SRAM at 0x8015f4, size 47 u32s
>iwl3945: U iwl3945_alive_start Runtime Alive received.
>iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 900
>iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 2668
>iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 80524
>iwl3945: U iwl3945_verify_ucode Runtime uCode is good in inst SRAM
>iwl3945: U iwl3945_alive_start RFKILL status: 0x1
>iwl3945: U iwl3945_commit_rxon Sending RXON
>* without RXON_FILTER_ASSOC_MSK
>* channel = 1
>* bssid = 00:00:00:00:00:00
>iwl3945: U iwl3945_add_station Add STA ID 24: ff:ff:ff:ff:ff:ff
>iwl3945: U iwl3945_send_add_station REPLY_ADD_STA PASSED
>iwl3945: U iwl3945_hw_reg_txpower_get_temperature Temperature: 122
>iwl3945: U iwl3945_alive_start ALIVE processing complete.
>wlan0: failed to set channel 40 (5200 MHz) for scan
>wlan0: failed to set channel 42 (5210 MHz) for scan
>wlan0: failed to set channel 44 (5220 MHz) for scan
>wlan0: failed to set channel 46 (5230 MHz) for scan
>wlan0: failed to set channel 48 (5240 MHz) for scan
>wlan0: failed to set channel 52 (5260 MHz) for scan
>wlan0: failed to set channel 56 (5280 MHz) for scan
>wlan0: failed to set channel 60 (5300 MHz) for scan
>wlan0: failed to set channel 64 (5320 MHz) for scan
>wlan0: failed to set channel 100 (5500 MHz) for scan
>wlan0: failed to set channel 104 (5520 MHz) for scan
>wlan0: failed to set channel 108 (5540 MHz) for scan
>wlan0: failed to set channel 112 (5560 MHz) for scan
>wlan0: failed to set channel 116 (5580 MHz) for scan
>wlan0: failed to set channel 120 (5600 MHz) for scan
>wlan0: failed to set channel 124 (5620 MHz) for scan
>wlan0: failed to set channel 128 (5640 MHz) for scan
>wlan0: failed to set channel 132 (5660 MHz) for scan
>wlan0: failed to set channel 136 (5680 MHz) for scan
>wlan0: failed to set channel 140 (5700 MHz) for scan
>wlan0: failed to restore operational channel after scan
>iwl3945: U iwl3945_commit_rxon Sending RXON
>* without RXON_FILTER_ASSOC_MSK
>* channel = 1
>* bssid = 00:40:96:29:9e:2d
>iwl3945: U iwl3945_add_station Add STA ID 24: ff:ff:ff:ff:ff:ff
>iwl3945: U iwl3945_send_add_station REPLY_ADD_STA PASSED
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:40:96:29:9e:2d
>wlan0: authenticate with AP 00:40:96:29:9e:2d
>wlan0: authenticate with AP 00:40:96:29:9e:2d
>wlan0: authentication with AP 00:40:96:29:9e:2d timed out
>wlan0: failed to set channel 1 (2412 MHz) for scan
>wlan0: failed to set channel 2 (2417 MHz) for scan
>wlan0: failed to set channel 3 (2422 MHz) for scan
>wlan0: failed to set channel 4 (2427 MHz) for scan
>wlan0: failed to set channel 5 (2432 MHz) for scan
>wlan0: failed to set channel 6 (2437 MHz) for scan
>wlan0: failed to set channel 7 (2442 MHz) for scan
>wlan0: failed to set channel 8 (2447 MHz) for scan
>wlan0: failed to set channel 9 (2452 MHz) for scan
>wlan0: failed to set channel 10 (2457 MHz) for scan
>wlan0: failed to set channel 11 (2462 MHz) for scan
>wlan0: failed to set channel 12 (2467 MHz) for scan
>wlan0: failed to set channel 13 (2472 MHz) for scan
>wlan0: failed to set channel 34 (5170 MHz) for scan
>wlan0: failed to set channel 36 (5180 MHz) for scan
>wlan0: failed to set channel 38 (5190 MHz) for scan
>wlan0: failed to set channel 40 (5200 MHz) for scan
>wlan0: failed to set channel 42 (5210 MHz) for scan
>wlan0: failed to set channel 44 (5220 MHz) for scan
>wlan0: failed to set channel 46 (5230 MHz) for scan
>wlan0: failed to set channel 48 (5240 MHz) for scan
>wlan0: failed to set channel 52 (5260 MHz) for scan
>wlan0: failed to set channel 56 (5280 MHz) for scan
>wlan0: failed to set channel 60 (5300 MHz) for scan
>wlan0: failed to set channel 64 (5320 MHz) for scan
>wlan0: failed to set channel 100 (5500 MHz) for scan
>wlan0: failed to set channel 104 (5520 MHz) for scan
>wlan0: failed to set channel 108 (5540 MHz) for scan
>wlan0: failed to set channel 112 (5560 MHz) for scan
>wlan0: failed to set channel 116 (5580 MHz) for scan
>wlan0: failed to set channel 120 (5600 MHz) for scan
>wlan0: failed to set channel 124 (5620 MHz) for scan
>wlan0: failed to set channel 128 (5640 MHz) for scan
>wlan0: failed to set channel 132 (5660 MHz) for scan
>wlan0: failed to set channel 136 (5680 MHz) for scan
>wlan0: failed to set channel 140 (5700 MHz) for scan
>wlan0: failed to restore operational channel after scan
>wlan0: failed to set channel 1 (2412 MHz) for scan
>wlan0: failed to set channel 2 (2417 MHz) for scan
>wlan0: failed to set channel 3 (2422 MHz) for scan
>wlan0: failed to set channel 4 (2427 MHz) for scan
>wlan0: failed to set channel 5 (2432 MHz) for scan
>wlan0: failed to set channel 6 (2437 MHz) for scan
>wlan0: failed to set channel 7 (2442 MHz) for scan
>wlan0: failed to set channel 8 (2447 MHz) for scan
>wlan0: failed to set channel 9 (2452 MHz) for scan
>wlan0: failed to set channel 10 (2457 MHz) for scan
>wlan0: failed to set channel 11 (2462 MHz) for scan
>wlan0: failed to set channel 12 (2467 MHz) for scan
>wlan0: failed to set channel 13 (2472 MHz) for scan
>wlan0: failed to set channel 34 (5170 MHz) for scan
>wlan0: failed to set channel 36 (5180 MHz) for scan
>wlan0: failed to set channel 38 (5190 MHz) for scan
>wlan0: failed to set channel 40 (5200 MHz) for scan
>wlan0: failed to set channel 42 (5210 MHz) for scan
>wlan0: failed to set channel 44 (5220 MHz) for scan
>wlan0: failed to set channel 46 (5230 MHz) for scan
>wlan0: failed to set channel 48 (5240 MHz) for scan
>wlan0: failed to set channel 52 (5260 MHz) for scan
>wlan0: failed to set channel 56 (5280 MHz) for scan
>wlan0: failed to set channel 60 (5300 MHz) for scan
>wlan0: failed to set channel 64 (5320 MHz) for scan
>wlan0: failed to set channel 100 (5500 MHz) for scan
>wlan0: failed to set channel 104 (5520 MHz) for scan
>wlan0: failed to set channel 108 (5540 MHz) for scan
>wlan0: failed to set channel 112 (5560 MHz) for scan
>wlan0: failed to set channel 116 (5580 MHz) for scan
>wlan0: failed to set channel 120 (5600 MHz) for scan
>wlan0: failed to set channel 124 (5620 MHz) for scan
>wlan0: failed to set channel 128 (5640 MHz) for scan
>wlan0: failed to set channel 132 (5660 MHz) for scan
>wlan0: failed to set channel 136 (5680 MHz) for scan
>wlan0: failed to set channel 140 (5700 MHz) for scan
>wlan0: failed to restore operational channel after scan
>wlan0: failed to set channel 1 (2412 MHz) for scan
>wlan0: failed to set channel 2 (2417 MHz) for scan
>wlan0: failed to set channel 3 (2422 MHz) for scan
>wlan0: failed to set channel 4 (2427 MHz) for scan
>wlan0: failed to set channel 5 (2432 MHz) for scan
>wlan0: failed to set channel 6 (2437 MHz) for scan
>wlan0: failed to set channel 7 (2442 MHz) for scan
>wlan0: failed to set channel 8 (2447 MHz) for scan
>wlan0: failed to set channel 9 (2452 MHz) for scan
>wlan0: failed to set channel 10 (2457 MHz) for scan
>wlan0: failed to set channel 11 (2462 MHz) for scan
>wlan0: failed to set channel 12 (2467 MHz) for scan
>wlan0: failed to set channel 13 (2472 MHz) for scan
>wlan0: failed to set channel 34 (5170 MHz) for scan
>wlan0: failed to set channel 36 (5180 MHz) for scan
>wlan0: failed to set channel 38 (5190 MHz) for scan
>wlan0: failed to set channel 40 (5200 MHz) for scan
>wlan0: failed to set channel 42 (5210 MHz) for scan
>wlan0: failed to set channel 44 (5220 MHz) for scan
>wlan0: failed to set channel 46 (5230 MHz) for scan
>wlan0: failed to set channel 48 (5240 MHz) for scan
>wlan0: failed to set channel 52 (5260 MHz) for scan
>wlan0: failed to set channel 56 (5280 MHz) for scan
>wlan0: failed to set channel 60 (5300 MHz) for scan
>wlan0: failed to set channel 64 (5320 MHz) for scan
>wlan0: failed to set channel 100 (5500 MHz) for scan
>wlan0: failed to set channel 104 (5520 MHz) for scan
>wlan0: failed to set channel 108 (5540 MHz) for scan
>wlan0: failed to set channel 112 (5560 MHz) for scan
>wlan0: failed to set channel 116 (5580 MHz) for scan
>wlan0: failed to set channel 120 (5600 MHz) for scan
>wlan0: failed to set channel 124 (5620 MHz) for scan
>wlan0: failed to set channel 128 (5640 MHz) for scan
>wlan0: failed to set channel 132 (5660 MHz) for scan
>wlan0: failed to set channel 136 (5680 MHz) for scan
>wlan0: failed to set channel 140 (5700 MHz) for scan
>wlan0: failed to restore operational channel after scan
>wlan0: failed to set channel 1 (2412 MHz) for scan
>wlan0: failed to set channel 2 (2417 MHz) for scan
>wlan0: failed to set channel 3 (2422 MHz) for scan
>wlan0: failed to set channel 4 (2427 MHz) for scan
>wlan0: failed to set channel 5 (2432 MHz) for scan
>wlan0: failed to set channel 6 (2437 MHz) for scan
>wlan0: failed to set channel 7 (2442 MHz) for scan
>wlan0: failed to set channel 8 (2447 MHz) for scan
>wlan0: failed to set channel 9 (2452 MHz) for scan
>wlan0: failed to set channel 10 (2457 MHz) for scan
>wlan0: failed to set channel 11 (2462 MHz) for scan
>wlan0: failed to set channel 12 (2467 MHz) for scan
>wlan0: failed to set channel 13 (2472 MHz) for scan
>wlan0: failed to set channel 34 (5170 MHz) for scan
>wlan0: failed to set channel 36 (5180 MHz) for scan
>wlan0: failed to set channel 38 (5190 MHz) for scan
>wlan0: failed to set channel 40 (5200 MHz) for scan
>wlan0: failed to set channel 42 (5210 MHz) for scan
>wlan0: failed to set channel 44 (5220 MHz) for scan
>wlan0: failed to set channel 46 (5230 MHz) for scan
>wlan0: failed to set channel 48 (5240 MHz) for scan
>wlan0: failed to set channel 52 (5260 MHz) for scan
>wlan0: failed to set channel 56 (5280 MHz) for scan
>wlan0: failed to set channel 60 (5300 MHz) for scan
>wlan0: failed to set channel 64 (5320 MHz) for scan
>wlan0: failed to set channel 100 (5500 MHz) for scan
>wlan0: failed to set channel 104 (5520 MHz) for scan
>wlan0: failed to set channel 108 (5540 MHz) for scan
>wlan0: failed to set channel 112 (5560 MHz) for scan
>wlan0: failed to set channel 116 (5580 MHz) for scan
>wlan0: failed to set channel 120 (5600 MHz) for scan
>wlan0: failed to set channel 124 (5620 MHz) for scan
>wlan0: failed to set channel 128 (5640 MHz) for scan
>wlan0: failed to set channel 132 (5660 MHz) for scan
>wlan0: failed to set channel 136 (5680 MHz) for scan
>wlan0: failed to set channel 140 (5700 MHz) for scan
>wlan0: failed to restore operational channel after scan
>wlan0: failed to set channel 1 (2412 MHz) for scan
>wlan0: failed to set channel 2 (2417 MHz) for scan
>wlan0: failed to set channel 3 (2422 MHz) for scan
>wlan0: failed to set channel 4 (2427 MHz) for scan
>wlan0: failed to set channel 5 (2432 MHz) for scan
>wlan0: failed to set channel 6 (2437 MHz) for scan
>wlan0: failed to set channel 7 (2442 MHz) for scan
>wlan0: failed to set channel 8 (2447 MHz) for scan
>wlan0: failed to set channel 9 (2452 MHz) for scan
>wlan0: failed to set channel 10 (2457 MHz) for scan
>wlan0: failed to set channel 11 (2462 MHz) for scan
>wlan0: failed to set channel 12 (2467 MHz) for scan
>wlan0: failed to set channel 13 (2472 MHz) for scan
>wlan0: failed to set channel 34 (5170 MHz) for scan
>wlan0: failed to set channel 36 (5180 MHz) for scan
>wlan0: failed to set channel 38 (5190 MHz) for scan
>wlan0: failed to set channel 40 (5200 MHz) for scan
>wlan0: failed to set channel 42 (5210 MHz) for scan
>wlan0: failed to set channel 44 (5220 MHz) for scan
>wlan0: failed to set channel 46 (5230 MHz) for scan
>wlan0: failed to set channel 48 (5240 MHz) for scan
>wlan0: failed to set channel 52 (5260 MHz) for scan
>wlan0: failed to set channel 56 (5280 MHz) for scan
>wlan0: failed to set channel 60 (5300 MHz) for scan
>wlan0: failed to set channel 64 (5320 MHz) for scan
>wlan0: failed to set channel 100 (5500 MHz) for scan
>wlan0: failed to set channel 104 (5520 MHz) for scan
>wlan0: failed to set channel 108 (5540 MHz) for scan
>wlan0: failed to set channel 112 (5560 MHz) for scan
>wlan0: failed to set channel 116 (5580 MHz) for scan
>wlan0: failed to set channel 120 (5600 MHz) for scan
>wlan0: failed to set channel 124 (5620 MHz) for scan
>wlan0: failed to set channel 128 (5640 MHz) for scan
>wlan0: failed to set channel 132 (5660 MHz) for scan
>wlan0: failed to set channel 136 (5680 MHz) for scan
>wlan0: failed to set channel 140 (5700 MHz) for scan
>wlan0: failed to restore operational channel after scan
>wlan0: failed to set channel 1 (2412 MHz) for scan
>wlan0: failed to set channel 2 (2417 MHz) for scan
>wlan0: failed to set channel 3 (2422 MHz) for scan
>wlan0: failed to set channel 4 (2427 MHz) for scan
>wlan0: failed to set channel 5 (2432 MHz) for scan
>wlan0: failed to set channel 6 (2437 MHz) for scan
>wlan0: failed to set channel 7 (2442 MHz) for scan
>wlan0: failed to set channel 8 (2447 MHz) for scan
>wlan0: failed to set channel 9 (2452 MHz) for scan
>wlan0: failed to set channel 10 (2457 MHz) for scan
>wlan0: failed to set channel 11 (2462 MHz) for scan
>wlan0: failed to set channel 12 (2467 MHz) for scan
>wlan0: failed to set channel 13 (2472 MHz) for scan
>wlan0: failed to set channel 34 (5170 MHz) for scan
>wlan0: failed to set channel 36 (5180 MHz) for scan
>wlan0: failed to set channel 38 (5190 MHz) for scan
>wlan0: failed to set channel 40 (5200 MHz) for scan
>wlan0: failed to set channel 42 (5210 MHz) for scan
>wlan0: failed to set channel 44 (5220 MHz) for scan
>wlan0: failed to set channel 46 (5230 MHz) for scan
>wlan0: failed to set channel 48 (5240 MHz) for scan
>wlan0: failed to set channel 52 (5260 MHz) for scan
>wlan0: failed to set channel 56 (5280 MHz) for scan
>wlan0: failed to set channel 60 (5300 MHz) for scan
>wlan0: failed to set channel 64 (5320 MHz) for scan
>wlan0: failed to set channel 100 (5500 MHz) for scan
>wlan0: failed to set channel 104 (5520 MHz) for scan
>wlan0: failed to set channel 108 (5540 MHz) for scan
>wlan0: failed to set channel 112 (5560 MHz) for scan
>wlan0: failed to set channel 116 (5580 MHz) for scan
>wlan0: failed to set channel 120 (5600 MHz) for scan
>wlan0: failed to set channel 124 (5620 MHz) for scan
>wlan0: failed to set channel 128 (5640 MHz) for scan
>wlan0: failed to set channel 132 (5660 MHz) for scan
>wlan0: failed to set channel 136 (5680 MHz) for scan
>wlan0: failed to set channel 140 (5700 MHz) for scan
>wlan0: failed to restore operational channel after scan
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:40:96:29:9e:2d
>wlan0: authenticate with AP 00:40:96:29:9e:2d
>wlan0: authenticate with AP 00:40:96:29:9e:2d
>wlan0: authentication with AP 00:40:96:29:9e:2d timed out

Actions: View

Attachments on bug 366111: 247661 | 247671 | 294716 | 294717