Attachment 294904 Details for Bug 253096 – dmesg output that goes along with the usbmon trace

dmesg output that goes along with the usbmon trace

dmesg.txt (text/plain), 46.16 KB, created by Dave Russell on 2008-02-14 10:20:02 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Dave Russell

Created: 2008-02-14 10:20:02 UTC

Size: 46.16 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.24-2.fc9 (mockbuild@) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-36)) #1 SMP Fri Jan 25 13:14:54 EST 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003f720000 (usable)
> BIOS-e820: 000000003f720000 - 000000003f72b000 (ACPI data)
> BIOS-e820: 000000003f72b000 - 000000003f780000 (ACPI NVS)
> BIOS-e820: 000000003f780000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
>119MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f64e0
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 259872) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   259872
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   259872
>On node 0 totalpages: 259872
>  DMA zone: 56 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4040 pages, LIFO batch:0
>  Normal zone: 3080 pages used for memmap
>  Normal zone: 222200 pages, LIFO batch:31
>  HighMem zone: 416 pages used for memmap
>  HighMem zone: 30080 pages, LIFO batch:7
>  Movable zone: 0 pages used for memmap
>DMI present.
>Using APIC driver default
>ACPI: RSDP 000F65A0, 0014 (r0 PTLTD )
>ACPI: RSDT 3F726101, 0034 (r1 PTLTD    RSDT    60400D0  LTP        0)
>ACPI: FACP 3F72AEE2, 0074 (r1 IBM    THINKCEN  60400D0 PTL         1)
>ACPI: DSDT 3F726135, 4DAD (r1    IBM THINKCEN  60400D0 MSFT  100000E)
>ACPI: FACS 3F72BFC0, 0040
>ACPI: TCPA 3F72AF56, 0032 (r1 IBM    THINKCEN  60400D0 PTL         1)
>ACPI: APIC 3F72AF88, 0050 (r1 PTLTD  	 APIC    60400D0  LTP        0)
>ACPI: BOOT 3F72AFD8, 0028 (r1 PTLTD  $SBFTBL$  60400D0  LTP        1)
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:2 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
>swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 256320
>Kernel command line: initrd=initrd0.img root=CDLABEL=F9-Alpha-i686-20080129 rootfstype=iso9660 ro quiet liveimg selinux=0 BOOT_IMAGE=vmlinuz0 
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0826000 soft=c0806000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2793.113 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1024 kB
> per task-struct memory footprint: 1680 bytes
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1012276k/1039488k available (2313k kernel code, 26568k reserved, 1196k data, 576k init, 121984k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0773000 - 0xc0803000   ( 576 kB)
>      .data : 0xc064275d - 0xc076d924   (1196 kB)
>      .text : 0xc0400000 - 0xc064275d   (2313 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 5591.53 BogoMIPS (lpj=2795765)
>Security Framework initialized
>SELinux:  Disabled at boot.
>Capability LSM initialized
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Hyper-Threading is disabled
>CPU: After all inits, caps: bfebf3ff 00000000 00000000 0000b080 00004400 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring handled by SMI
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>ACPI: Core revision 20070126
>CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 07
>Total of 1 processors activated (5591.53 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=608 bytes
>sizeof(dentry)=160 bytes
>sizeof(ext3inode)=860 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=3552 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000001
>  groups: 00000001
>khelper used greatest stack depth: 3136 bytes left
>net_namespace: 80 bytes
>Booting paravirtualized kernel on bare hardware
>Time:  9:48:31  Date: 02/14/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd98d, last bus=3
>PCI: Using configuration type 1
>Setting up standard PCI resources
>khelper used greatest stack depth: 3036 bytes left
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>khelper used greatest stack depth: 2872 bytes left
>khelper used greatest stack depth: 2856 bytes left
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>Force enabled HPET at base address 0xfed00000
>PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 1180-11bf claimed by ICH4 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SLOT._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *9 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet clockevent registered
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>ACPI: RTC can wake from S4
>Time: tsc clocksource has been installed.
>system 00:01: ioport range 0x4d0-0x4d1 has been reserved
>system 00:01: ioport range 0x800-0x87f has been reserved
>system 00:01: ioport range 0x1000-0x107f has been reserved
>system 00:01: ioport range 0x1100-0x111f has been reserved
>system 00:01: ioport range 0x1180-0x11bf has been reserved
>system 00:01: ioport range 0xe000-0xe00f has been reserved
>system 00:01: ioport range 0xfe00-0xfe00 has been reserved
>system 00:01: ioport range 0xfe10-0xfe11 has been reserved
>system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
>system 00:01: iomem range 0xfed90000-0xfed903ff has been reserved
>PCI: Bridge: 0000:00:1e.0
>  IO window: 2000-2fff
>  MEM window: e8100000-e81fffff
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Switched to high resolution mode on CPU 0
>Freeing initrd memory: 4152k freed
>Simple Boot Flag at 0x35 set to 0x1
>IBM machine detected. Enabling interrupts during APM calls.
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1202982512.175:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>khelper used greatest stack depth: 2772 bytes left
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>PCI: Firmware left 0000:03:08.0 e100 interrupts enabled, disabling
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: Thermal Zone [THM0] (61 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>khelper used greatest stack depth: 2728 bytes left
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>agpgart: Detected an Intel 865 Chipset.
>agpgart: Detected 8060K stolen memory.
>agpgart: AGP aperture is 128M @ 0xf0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 12:765:828
>Freeing unused kernel memory: 576k freed
>Write protecting the kernel read-only data: 925k
>mount used greatest stack depth: 2576 bytes left
>SCSI subsystem initialized
>Driver 'sr' needs updating - please use bus_type methods
>loop: module loaded
>udevd used greatest stack depth: 2484 bytes left
>udevtrigger used greatest stack depth: 2344 bytes left
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>libata version 3.00 loaded.
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>modprobe used greatest stack depth: 1984 bytes left
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xe8080000
>usb 2-1: new low speed USB device using uhci_hcd and address 2
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>modprobe used greatest stack depth: 1892 bytes left
>ata_piix 0000:00:1f.1: version 2.12
>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
>ata1.00: HPA detected: current 73244370, native 78156288
>ata1.00: ATA-6: IC35L060AVV207-0, V22OA66A, max UDMA/100
>ata1.00: 73244370 sectors, multi 16: LBA48 
>ata1.01: ATAPI: SAMSUNG CD-ROM  SC-148C, B103, max UDMA/33
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/33
>usb 2-1: new low speed USB device using uhci_hcd and address 3
>scsi 0:0:0:0: Direct-Access     ATA      IC35L060AVV207-0 V22O PQ: 0 ANSI: 5
>scsi 0:0:1:0: CD-ROM            SAMSUNG  CD-ROM SC-148C   B103 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 20x/48x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:1:0: Attached scsi CD-ROM sr0
>modprobe used greatest stack depth: 1436 bytes left
>Driver 'sd' needs updating - please use bus_type methods
>sd 0:0:0:0: [sda] 73244370 512-byte hardware sectors (37501 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 73244370 512-byte hardware sectors (37501 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>usb 2-1: configuration #1 chosen from 1 choice
>input: HID 04b3:310b as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/input/input1
>input,hidraw0: USB HID v1.00 Mouse [HID 04b3:310b] on usb-0000:00:1d.1-1
>usb 2-2: new full speed USB device using uhci_hcd and address 4
>usb 2-2: configuration #1 chosen from 1 choice
>hub 2-2:1.0: USB hub found
>hub 2-2:1.0: 3 ports detected
>usb 2-2.1: new full speed USB device using uhci_hcd and address 5
>usb 2-2.1: configuration #1 chosen from 1 choice
>input: Solid Year Solid Year USB Hub Keyboard as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2.1/2-2.1:1.0/input/input2
>input,hidraw1: USB HID v1.00 Keyboard [Solid Year Solid Year USB Hub Keyboard] on usb-0000:00:1d.1-2.1
>input: Solid Year Solid Year USB Hub Keyboard as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2.1/2-2.1:1.1/input/input3
>input,hiddev96,hidraw2: USB HID v1.00 Device [Solid Year Solid Year USB Hub Keyboard] on usb-0000:00:1d.1-2.1
>ISO 9660 Extensions: Microsoft Joliet Level 3
>Unable to load NLS charset utf8
>Unable to load NLS charset utf8
>ISO 9660 Extensions: RRIP_1991A
>mount used greatest stack depth: 1156 bytes left
>squashfs: version 3.3 (2007/10/31) Phillip Lougher
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>input: Power Button (FF) as /devices/virtual/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/virtual/input/input5
>ACPI: Power Button (CM) [PWRB]
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 0:0:1:0: Attached scsi generic sg1 type 5
>intel_rng: Firmware space is locked read-only. If you can't or
>intel_rng: don't want to disable this in firmware setup, and if
>intel_rng: you are certain that your system has a functional
>intel_rng: RNG, try using the 'no_fwh_detect' option.
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 20
>ACPI: PCI Interrupt 0000:03:09.0[A] -> GSI 21 (level, low) -> IRQ 21
>Olympic.c v1.0.5 6/04/02 - Peter De Schrijver & Mike Phillips 
>0000:03:09.0. I/O at 2000, MMIO at f8b1c800, LAP at f8b1e000, using irq 21
>input: PC Speaker as /devices/platform/pcspkr/input/input6
>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k
>e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
>e100: Copyright(c) 1999-2006 Intel Corporation
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>iTCO_vendor_support: vendor-support=0
>parport_pc 00:0c: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>Olympic: 0000:03:09.0 registered as: tr0
>ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 20 (level, low) -> IRQ 22
>e100: eth0: e100_probe: addr 0xe8100000, irq 22, MAC addr 00:0d:60:29:20:66
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>ALSA sound/pci/ac97/ac97_codec.c:2121: AC'97 0 analog subsections not ready
>intel8x0_measure_ac97_clock: measured 50867 usecs
>intel8x0: measured clock 216 rejected
>intel8x0: clocking to 48000
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:2031608k
>warning: process `python2' used the deprecated sysctl system call with 1.23.
>warning: process `python2' used the deprecated sysctl system call with 1.23.
>warning: process `python2' used the deprecated sysctl system call with 1.23.
>warning: process `python2' used the deprecated sysctl system call with 1.23.
>warning: process `python2' used the deprecated sysctl system call with 1.23.
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>Loading iSCSI transport class v2.0-724.
>iscsi: registered transport (tcp)
>iscsi: registered transport (iser)
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>audit(1203000566.666:2): audit_pid=2343 old=0 by auid=4294967295
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>e100: eth0: e100_watchdog: link up, 100Mbps, half-duplex
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>[drm] Initialized drm 1.1.0 20060810
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>[drm] Initialized i915 1.11.0 20071122 on minor 0
>eth0: no IPv6 routers present
>usb 1-1: new full speed USB device using uhci_hcd and address 2
>usb 1-1: configuration #1 chosen from 1 choice
>Initializing USB Mass Storage driver...
>scsi2 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usb 1-1: USB disconnect, address 2
>usb 1-1: new full speed USB device using uhci_hcd and address 3
>usb 1-1: configuration #1 chosen from 1 choice
>usb-storage: probe of 1-1:1.0 failed with error -5
>usb-storage: probe of 1-1:1.1 failed with error -5
>scsi5 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usbserial
>drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
>usbcore: registered new interface driver usbserial_generic
>drivers/usb/serial/usb-serial.c: USB Serial Driver core
>drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem (1-port)
>option 1-1:1.0: GSM modem (1-port) converter detected
>usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
>option 1-1:1.1: GSM modem (1-port) converter detected
>usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
>usbcore: registered new interface driver option
>drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1
>usb-storage: device scan complete
>scsi 5:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
>sr1: scsi-1 drive
>sr 5:0:0:0: Attached scsi CD-ROM sr1
>sr 5:0:0:0: Attached scsi generic sg2 type 5
>usb 1-1: reset full speed USB device using uhci_hcd and address 3
>usb 1-1: reset full speed USB device using uhci_hcd and address 3
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: reset full speed USB device using uhci_hcd and address 3
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: reset full speed USB device using uhci_hcd and address 3
>usb 1-1: device not accepting address 3, error -71
>usb 1-1: reset full speed USB device using uhci_hcd and address 3
>usb 1-1: device not accepting address 3, error -71
>usb 1-1: USB disconnect, address 3
>option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
>option 1-1:1.0: device disconnected
>option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
>option 1-1:1.1: device disconnected
>usb 1-1: new full speed USB device using uhci_hcd and address 4
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 5
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 6
>usb 1-1: device not accepting address 6, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 7
>usb 1-1: device not accepting address 7, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 8
>usb 1-1: configuration #1 chosen from 1 choice
>usb-storage: probe of 1-1:1.0 failed with error -5
>option 1-1:1.0: GSM modem (1-port) converter detected
>usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
>usb-storage: probe of 1-1:1.1 failed with error -5
>option 1-1:1.1: GSM modem (1-port) converter detected
>usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
>scsi8 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 8
>usb-storage: waiting for device to settle before scanning
>usb-storage: device scan complete
>usb 1-1: reset full speed USB device using uhci_hcd and address 8
>scsi 8:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
>sr1: scsi-1 drive
>sr 8:0:0:0: Attached scsi CD-ROM sr1
>sr 8:0:0:0: Attached scsi generic sg2 type 5
>usb 1-1: reset full speed USB device using uhci_hcd and address 8
>usb 1-1: reset full speed USB device using uhci_hcd and address 8
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: reset full speed USB device using uhci_hcd and address 8
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: reset full speed USB device using uhci_hcd and address 8
>usb 1-1: device not accepting address 8, error -71
>usb 1-1: reset full speed USB device using uhci_hcd and address 8
>usb 1-1: device not accepting address 8, error -71
>usb 1-1: USB disconnect, address 8
>option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
>option 1-1:1.0: device disconnected
>option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
>option 1-1:1.1: device disconnected
>usb 1-1: new full speed USB device using uhci_hcd and address 9
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 10
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 11
>usb 1-1: device not accepting address 11, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 12
>usb 1-1: device not accepting address 12, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 13
>usb 1-1: configuration #1 chosen from 1 choice
>usb-storage: probe of 1-1:1.0 failed with error -5
>option 1-1:1.0: GSM modem (1-port) converter detected
>usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
>usb-storage: probe of 1-1:1.1 failed with error -5
>option 1-1:1.1: GSM modem (1-port) converter detected
>usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
>scsi11 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 13
>usb-storage: waiting for device to settle before scanning
>usb-storage: device scan complete
>usb 1-1: reset full speed USB device using uhci_hcd and address 13
>scsi 11:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
>sr1: scsi-1 drive
>sr 11:0:0:0: Attached scsi CD-ROM sr1
>sr 11:0:0:0: Attached scsi generic sg2 type 5
>usb 1-1: reset full speed USB device using uhci_hcd and address 13
>usb 1-1: reset full speed USB device using uhci_hcd and address 13
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: reset full speed USB device using uhci_hcd and address 13
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: reset full speed USB device using uhci_hcd and address 13
>usb 1-1: device not accepting address 13, error -71
>usb 1-1: reset full speed USB device using uhci_hcd and address 13
>usb 1-1: device not accepting address 13, error -71
>usb 1-1: USB disconnect, address 13
>option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
>option 1-1:1.0: device disconnected
>option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
>option 1-1:1.1: device disconnected
>usb 1-1: new full speed USB device using uhci_hcd and address 14
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 15
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 16
>usb 1-1: device not accepting address 16, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 17
>usb 1-1: device not accepting address 17, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 18
>usb 1-1: configuration #1 chosen from 1 choice
>usb-storage: probe of 1-1:1.0 failed with error -5
>option 1-1:1.0: GSM modem (1-port) converter detected
>usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
>usb-storage: probe of 1-1:1.1 failed with error -5
>option 1-1:1.1: GSM modem (1-port) converter detected
>usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
>scsi14 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 18
>usb-storage: waiting for device to settle before scanning
>usb-storage: device scan complete
>usb 1-1: reset full speed USB device using uhci_hcd and address 18
>scsi 14:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
>sr1: scsi-1 drive
>sr 14:0:0:0: Attached scsi CD-ROM sr1
>sr 14:0:0:0: Attached scsi generic sg2 type 5
>usb 1-1: reset full speed USB device using uhci_hcd and address 18
>usb 1-1: reset full speed USB device using uhci_hcd and address 18
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: reset full speed USB device using uhci_hcd and address 18
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: reset full speed USB device using uhci_hcd and address 18
>usb 1-1: device not accepting address 18, error -71
>usb 1-1: reset full speed USB device using uhci_hcd and address 18
>usb 1-1: device not accepting address 18, error -71
>usb 1-1: USB disconnect, address 18
>option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
>option 1-1:1.0: device disconnected
>option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
>option 1-1:1.1: device disconnected
>usb 1-1: new full speed USB device using uhci_hcd and address 19
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 20
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 21
>usb 1-1: device not accepting address 21, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 22
>usb 1-1: device not accepting address 22, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 23
>usb 1-1: configuration #1 chosen from 1 choice
>usb-storage: probe of 1-1:1.0 failed with error -5
>option 1-1:1.0: GSM modem (1-port) converter detected
>usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
>usb-storage: probe of 1-1:1.1 failed with error -5
>option 1-1:1.1: GSM modem (1-port) converter detected
>usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
>scsi17 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 23
>usb-storage: waiting for device to settle before scanning
>usb-storage: device scan complete
>usb 1-1: reset full speed USB device using uhci_hcd and address 23
>scsi 17:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
>sr1: scsi-1 drive
>sr 17:0:0:0: Attached scsi CD-ROM sr1
>sr 17:0:0:0: Attached scsi generic sg2 type 5
>usb 1-1: reset full speed USB device using uhci_hcd and address 23
>usb 1-1: reset full speed USB device using uhci_hcd and address 23
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: reset full speed USB device using uhci_hcd and address 23
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: reset full speed USB device using uhci_hcd and address 23
>usb 1-1: device not accepting address 23, error -71
>usb 1-1: reset full speed USB device using uhci_hcd and address 23
>usb 1-1: device not accepting address 23, error -71
>usb 1-1: USB disconnect, address 23
>option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
>option 1-1:1.0: device disconnected
>option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
>option 1-1:1.1: device disconnected
>usb 1-1: new full speed USB device using uhci_hcd and address 24
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 25
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 26
>usb 1-1: device not accepting address 26, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 27
>usb 1-1: device not accepting address 27, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 28
>usb 1-1: configuration #1 chosen from 1 choice
>usb-storage: probe of 1-1:1.0 failed with error -5
>option 1-1:1.0: GSM modem (1-port) converter detected
>usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
>usb-storage: probe of 1-1:1.1 failed with error -5
>option 1-1:1.1: GSM modem (1-port) converter detected
>usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
>scsi20 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 28
>usb-storage: waiting for device to settle before scanning
>usb-storage: device scan complete
>usb 1-1: reset full speed USB device using uhci_hcd and address 28
>scsi 20:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
>sr1: scsi-1 drive
>sr 20:0:0:0: Attached scsi CD-ROM sr1
>sr 20:0:0:0: Attached scsi generic sg2 type 5
>usb 1-1: reset full speed USB device using uhci_hcd and address 28
>usb 1-1: reset full speed USB device using uhci_hcd and address 28
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: reset full speed USB device using uhci_hcd and address 28
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: reset full speed USB device using uhci_hcd and address 28
>usb 1-1: device not accepting address 28, error -71
>usb 1-1: reset full speed USB device using uhci_hcd and address 28
>usb 1-1: device not accepting address 28, error -71
>usb 1-1: USB disconnect, address 28
>option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
>option 1-1:1.0: device disconnected
>option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
>option 1-1:1.1: device disconnected
>usb 1-1: new full speed USB device using uhci_hcd and address 29
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 30
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 31
>usb 1-1: device not accepting address 31, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 32
>usb 1-1: device not accepting address 32, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 33
>usb 1-1: configuration #1 chosen from 1 choice
>usb-storage: probe of 1-1:1.0 failed with error -5
>option 1-1:1.0: GSM modem (1-port) converter detected
>usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
>usb-storage: probe of 1-1:1.1 failed with error -5
>option 1-1:1.1: GSM modem (1-port) converter detected
>usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
>scsi23 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 33
>usb-storage: waiting for device to settle before scanning
>usb-storage: device scan complete
>usb 1-1: reset full speed USB device using uhci_hcd and address 33
>scsi 23:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
>sr1: scsi-1 drive
>sr 23:0:0:0: Attached scsi CD-ROM sr1
>sr 23:0:0:0: Attached scsi generic sg2 type 5
>usb 1-1: reset full speed USB device using uhci_hcd and address 33
>usb 1-1: reset full speed USB device using uhci_hcd and address 33
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: reset full speed USB device using uhci_hcd and address 33
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: reset full speed USB device using uhci_hcd and address 33
>usb 1-1: device not accepting address 33, error -71
>usb 1-1: reset full speed USB device using uhci_hcd and address 33
>usb 1-1: device not accepting address 33, error -71
>usb 1-1: USB disconnect, address 33
>option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
>option 1-1:1.0: device disconnected
>option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
>option 1-1:1.1: device disconnected
>usb 1-1: new full speed USB device using uhci_hcd and address 34
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 35
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 36
>usb 1-1: device not accepting address 36, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 37
>usb 1-1: device not accepting address 37, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 38
>usb 1-1: configuration #1 chosen from 1 choice
>usb-storage: probe of 1-1:1.0 failed with error -5
>option 1-1:1.0: GSM modem (1-port) converter detected
>usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
>usb-storage: probe of 1-1:1.1 failed with error -5
>option 1-1:1.1: GSM modem (1-port) converter detected
>usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
>scsi26 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 38
>usb-storage: waiting for device to settle before scanning
>usb-storage: device scan complete
>usb 1-1: reset full speed USB device using uhci_hcd and address 38
>scsi 26:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
>sr1: scsi-1 drive
>sr 26:0:0:0: Attached scsi CD-ROM sr1
>sr 26:0:0:0: Attached scsi generic sg2 type 5
>usb 1-1: reset full speed USB device using uhci_hcd and address 38
>usb 1-1: reset full speed USB device using uhci_hcd and address 38
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: reset full speed USB device using uhci_hcd and address 38
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: reset full speed USB device using uhci_hcd and address 38
>usb 1-1: device not accepting address 38, error -71
>usb 1-1: reset full speed USB device using uhci_hcd and address 38
>usb 1-1: device not accepting address 38, error -71
>usb 1-1: USB disconnect, address 38
>option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
>option 1-1:1.0: device disconnected
>option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
>option 1-1:1.1: device disconnected
>usb 1-1: new full speed USB device using uhci_hcd and address 39
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 40
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 41
>usb 1-1: device not accepting address 41, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 42
>usb 1-1: device not accepting address 42, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 43
>usb 1-1: configuration #1 chosen from 1 choice
>usb-storage: probe of 1-1:1.0 failed with error -5
>option 1-1:1.0: GSM modem (1-port) converter detected
>usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
>usb-storage: probe of 1-1:1.1 failed with error -5
>option 1-1:1.1: GSM modem (1-port) converter detected
>usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
>scsi29 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 43
>usb-storage: waiting for device to settle before scanning
>usb-storage: device scan complete
>usb 1-1: reset full speed USB device using uhci_hcd and address 43
>scsi 29:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
>sr1: scsi-1 drive
>sr 29:0:0:0: Attached scsi CD-ROM sr1
>sr 29:0:0:0: Attached scsi generic sg2 type 5
>usb 1-1: USB disconnect, address 43
>option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
>option 1-1:1.0: device disconnected
>option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
>option 1-1:1.1: device disconnected
>scsi 29:0:0:0: rejecting I/O to dead device
>scsi 29:0:0:0: rejecting I/O to dead device
>usb 1-1: new full speed USB device using uhci_hcd and address 44
>usb 1-1: configuration #1 chosen from 1 choice
>scsi30 : SCSI emulation for USB Mass Storage devices
>usb 1-1: USB disconnect, address 44
>usb-storage: device found at 44
>usb-storage: waiting for device to settle before scanning
>usb 1-1: new full speed USB device using uhci_hcd and address 45
>usb 1-1: configuration #1 chosen from 1 choice
>usb-storage: probe of 1-1:1.0 failed with error -5
>option 1-1:1.0: GSM modem (1-port) converter detected
>usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
>usb-storage: probe of 1-1:1.1 failed with error -5
>option 1-1:1.1: GSM modem (1-port) converter detected
>usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
>scsi33 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 45
>usb-storage: waiting for device to settle before scanning
>usb-storage: device scan complete
>scsi 33:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
>sr1: scsi-1 drive
>sr 33:0:0:0: Attached scsi CD-ROM sr1
>sr 33:0:0:0: Attached scsi generic sg2 type 5
>usb 1-1: reset full speed USB device using uhci_hcd and address 45
>usb 1-1: reset full speed USB device using uhci_hcd and address 45
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: reset full speed USB device using uhci_hcd and address 45
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: reset full speed USB device using uhci_hcd and address 45
>usb 1-1: device not accepting address 45, error -71
>usb 1-1: reset full speed USB device using uhci_hcd and address 45
>usb 1-1: device not accepting address 45, error -71
>usb 1-1: USB disconnect, address 45
>option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
>option 1-1:1.0: device disconnected
>option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
>option 1-1:1.1: device disconnected
>usb 1-1: new full speed USB device using uhci_hcd and address 46
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 47
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 48
>usb 1-1: device not accepting address 48, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 49
>usb 1-1: device not accepting address 49, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 50
>usb 1-1: configuration #1 chosen from 1 choice
>usb-storage: probe of 1-1:1.0 failed with error -5
>option 1-1:1.0: GSM modem (1-port) converter detected
>usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
>usb-storage: probe of 1-1:1.1 failed with error -5
>option 1-1:1.1: GSM modem (1-port) converter detected
>usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
>scsi36 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 50
>usb-storage: waiting for device to settle before scanning
>usb-storage: device scan complete
>usb 1-1: reset full speed USB device using uhci_hcd and address 50
>scsi 36:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
>sr1: scsi-1 drive
>sr 36:0:0:0: Attached scsi CD-ROM sr1
>sr 36:0:0:0: Attached scsi generic sg2 type 5
>usb 1-1: reset full speed USB device using uhci_hcd and address 50
>usb 1-1: reset full speed USB device using uhci_hcd and address 50
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: reset full speed USB device using uhci_hcd and address 50
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: reset full speed USB device using uhci_hcd and address 50
>usb 1-1: device not accepting address 50, error -71
>usb 1-1: reset full speed USB device using uhci_hcd and address 50
>usb 1-1: device not accepting address 50, error -71
>usb 1-1: USB disconnect, address 50
>option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
>option 1-1:1.0: device disconnected
>option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
>option 1-1:1.1: device disconnected
>usb 1-1: new full speed USB device using uhci_hcd and address 51
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 52
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 53
>usb 1-1: device not accepting address 53, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 54
>usb 1-1: device not accepting address 54, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 55
>usb 1-1: configuration #1 chosen from 1 choice
>usb-storage: probe of 1-1:1.0 failed with error -5
>option 1-1:1.0: GSM modem (1-port) converter detected
>usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
>usb-storage: probe of 1-1:1.1 failed with error -5
>option 1-1:1.1: GSM modem (1-port) converter detected
>usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
>scsi39 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 55
>usb-storage: waiting for device to settle before scanning
>usb-storage: device scan complete
>usb 1-1: reset full speed USB device using uhci_hcd and address 55
>scsi 39:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
>sr1: scsi-1 drive
>sr 39:0:0:0: Attached scsi CD-ROM sr1
>sr 39:0:0:0: Attached scsi generic sg2 type 5

Actions: View

Attachments on bug 253096: 252141 | 271941 | 278531 | 294762 | 294903 | 294904 | 303000 | 303001 | 306563