Attachment 294947 Details for Bug 382071 – dmesg output

dmesg output

dmesg.txt (text/plain), 34.64 KB, created by David Campbell on 2008-02-14 20:12:28 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: David Campbell

Created: 2008-02-14 20:12:28 UTC

Size: 34.64 KB

patch

obsolete

>Linux version 2.6.23.15-137.fc8 (mockbuild@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Sun Feb 10 17:48:34 EST 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
> BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ff70000 (usable)
> BIOS-e820: 000000007ff70000 - 000000007ff7b000 (ACPI data)
> BIOS-e820: 000000007ff7b000 - 000000007ff80000 (ACPI NVS)
> BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
>1151MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f6b70
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 524144) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   524144
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   524144
>On node 0 totalpages: 524144
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 2302 pages used for memmap
>  HighMem zone: 292466 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI present.
>Using APIC driver default
>ACPI: RSDP 000F6BD0, 0014 (r0 PTLTD )
>ACPI: RSDT 7FF76CD6, 0034 (r1 PTLTD    RSDT    6040000  LTP        0)
>ACPI: FACP 7FF7AECF, 0074 (r1 Clevo  SPDG      6040000 PTL         3)
>ACPI: DSDT 7FF76D0A, 41C5 (r1  INTEL SPRGDLEG  6040000 MSFT  100000E)
>ACPI: FACS 7FF7BFC0, 0040
>ACPI: APIC 7FF7AF43, 005E (r1 PTLTD  	 APIC    6040000  LTP        0)
>ACPI: BOOT 7FF7AFA1, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
>ACPI: SSDT 7FF7AFC9, 0037 (r1 PTLTD  ACPIHT    6040000  LTP        1)
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:2 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 15:2 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
>swsusp: Registered nosave memory region: 000000000009e000 - 000000000009f000
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d0000
>swsusp: Registered nosave memory region: 00000000000d0000 - 00000000000d8000
>swsusp: Registered nosave memory region: 00000000000d8000 - 00000000000dc000
>swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
>Built 1 zonelists in Zone order.  Total pages: 520050
>Kernel command line: ro root=LABEL=/ rhgb quiet irqpoll
>Misrouted IRQ fixup and polling support enabled
>This may significantly impact system performance
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07a9000 soft=c0789000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 3200.139 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2070508k/2096576k available (2187k kernel code, 24760k reserved, 1118k data, 280k init, 1179072k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0740000 - 0xc0786000   ( 280 kB)
>      .data : 0xc0622d15 - 0xc073a544   (1118 kB)
>      .text : 0xc0400000 - 0xc0622d15   (2187 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>Calibrating delay using timer specific routine.. 6431.80 BogoMIPS (lpj=3215900)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebf3ff 00000000 00000000 0000b080 00004400 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 09
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07aa000 soft=c078a000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 6399.32 BogoMIPS (lpj=3199664)
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebf3ff 00000000 00000000 0000b080 00004400 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU1: Thermal monitoring enabled
>CPU1: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 09
>Total of 2 processors activated (12831.12 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=1552 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 20:38:25  Date: 02/14/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd972, last bus=3
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>Force enabled HPET at base address 0xfed00000
>PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 1180-11bf claimed by ICH4 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *5)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 5) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs *11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs *11)
>ACPI: PCI Interrupt Link [LNKH] (IRQs *5)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 0 of device 0000:00:00.0
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet clockevent registered
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Time: tsc clocksource has been installed.
>pnp: 00:01: iomem range 0xfecf0000-0xfecfffff has been reserved
>pnp: 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: 3000-3fff
>  MEM window: d0100000-d01fffff
>  PREFETCH window: e0000000-efffffff
>PCI: Bus 4, cardbus bridge: 0000:03:00.0
>  IO window: 00004800-000048ff
>  IO window: 00004c00-00004cff
>  PREFETCH window: 8c000000-8fffffff
>  MEM window: 90000000-93ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 4000-4fff
>  MEM window: d0200000-d02fffff
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PCI: Enabling device 0000:03:00.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3033k freed
>Simple Boot Flag at 0x37 set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1203021505.465:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 433CDEB37FB53040
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Thermal Zone [THM0] (48 C)
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected an Intel 865 Chipset.
>agpgart: AGP aperture is 256M @ 0xa0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS2 at I/O 0x3e8 (irq = 3) is a 8250
>00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 17
>ACPI: PCI interrupt for device 0000:00:1f.6 disabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:03:00.0 [1558:0800]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:03:00.0, mfunc 0x00001002, devctl 0x64
>Yenta: ISA IRQ mask 0x0cf0, PCI irq 16
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#03) from #03 to #07
>pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
>cs: IO port probe 0x4000-0x4fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 12:728:649
>Freeing unused kernel memory: 280k freed
>Write protecting the kernel read-only data: 850k
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 18, io mem 0xd0000000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>input: PS/2 Mouse as /class/input/input2
>input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001cc0
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001ce0
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 1-1: new high speed USB device using ehci_hcd and address 2
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 20, io base 0x00002000
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002020
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 1-1: configuration #1 chosen from 1 choice
>hub 1-1:1.0: USB hub found
>hub 1-1:1.0: 4 ports detected
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 19 (level, low) -> IRQ 19
>scsi0 : pata_pdc202xx_old
>scsi1 : pata_pdc202xx_old
>ata1: PATA max UDMA/100 cmd 0x00014450 ctl 0x00014446 bmdma 0x00014400 irq 19
>ata2: PATA max UDMA/100 cmd 0x00014448 ctl 0x00014442 bmdma 0x00014408 irq 19
>ata1.00: ATA-6: HTS726060M9AT00, MH4OA68A, max UDMA/100
>ata1.00: 117210240 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>ata2.00: ATA-6: HTS721010G9AT00, MCZOA51A, max UDMA/100
>ata2.00: 195371568 sectors, multi 16: LBA48 
>ata2.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      HTS726060M9AT00  MH4O PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:<6>usb 1-4: new high speed USB device using ehci_hcd and address 4
>usb 1-4: configuration #1 chosen from 1 choice
>usb 1-5: new high speed USB device using ehci_hcd and address 5
> sda1
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: Direct-Access     ATA      HTS721010G9AT00  MCZO PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdb] 195371568 512-byte hardware sectors (100030 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sdb] 195371568 512-byte hardware sectors (100030 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 sdb3 sdb4
>sd 1:0:0:0: [sdb] Attached SCSI disk
>usb 1-5: configuration #1 chosen from 1 choice
>usb 1-6: new high speed USB device using ehci_hcd and address 6
>usb 1-6: configuration #1 chosen from 1 choice
>usb 3-1: new full speed USB device using uhci_hcd and address 2
>usb 3-1: configuration #1 chosen from 1 choice
>input: Elan USB Phone as /class/input/input4
>input: USB HID v1.00 Device [Elan USB Phone] on usb-0000:00:1d.1-1
>usb 5-1: new full speed USB device using uhci_hcd and address 2
>usb 5-1: configuration #1 chosen from 1 choice
>usb 1-1.2: new high speed USB device using ehci_hcd and address 8
>usb 1-1.2: configuration #1 chosen from 1 choice
>usb 1-1.4: new low speed USB device using ehci_hcd and address 9
>usb 1-1.4: config 1 has an invalid interface number: 1 but max is 0
>usb 1-1.4: config 1 has no interface number 0
>usb 1-1.4: configuration #1 chosen from 1 choice
>input: PS/2+USB Mouse as /class/input/input5
>input: USB HID v1.00 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.7-1.4
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00012060 irq 14
>ata4: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00012068 irq 15
>ata3.00: ATAPI: PIONEER DVD-RW  DVRKD08, 1.00, max UDMA/33
>ata3.00: configured for UDMA/33
>scsi 2:0:0:0: CD-ROM            PIONEER  DVD-RW  DVRKD08  1.00 PQ: 0 ANSI: 5
>Initializing USB Mass Storage driver...
>scsi4 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 4
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device scan complete
>scsi 4:0:0:0: Direct-Access     GENERIC  USB Storage-SMC  014D PQ: 0 ANSI: 0 CCS
>scsi 4:0:0:1: Direct-Access     GENERIC  USB Storage-CFC  014D PQ: 0 ANSI: 0 CCS
>scsi 4:0:0:2: Direct-Access     GENERIC  USB Storage-MMC  014D PQ: 0 ANSI: 0 CCS
>scsi 4:0:0:3: Direct-Access     GENERIC  USB Storage-MSC  014D PQ: 0 ANSI: 0 CCS
>sd 4:0:0:0: [sdc] Attached SCSI removable disk
>sd 4:0:0:1: [sdd] Attached SCSI removable disk
>sd 4:0:0:2: [sde] Attached SCSI removable disk
>sd 4:0:0:3: [sdf] Attached SCSI removable disk
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1203021523.147:2): selinux=0 auid=4294967295
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 2:0:0:0: Attached scsi CD-ROM sr0
>cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>sr 2:0:0:0: Attached scsi generic sg2 type 5
>sd 4:0:0:0: Attached scsi generic sg3 type 0
>sd 4:0:0:1: Attached scsi generic sg4 type 0
>sd 4:0:0:2: Attached scsi generic sg5 type 0
>sd 4:0:0:3: Attached scsi generic sg6 type 0
>cs: IO port probe 0xa00-0xaff: clean.
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>iTCO_vendor_support: vendor-support=0
>Bluetooth: HCI USB driver ver 2.9
>usbcore: registered new interface driver hci_usb
>ACPI: Battery Slot [BAT0] (battery present)
>input: Lid Switch as /class/input/input6
>ACPI: Lid Switch [LID]
>input: Sleep Button (CM) as /class/input/input7
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
>ACPI: Sleep Button (CM) [SLPB]
>input: Power Button (CM) as /class/input/input8
>ACPI: Power Button (CM) [PWRB]
>FDC 0 is a National Semiconductor PC87306
>input: PC Speaker as /class/input/input9
>ACPI: AC Adapter [ADP0] (on-line)
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>intel_rng: FWH not detected
>parport_pc 00:0a: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
>ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 19 (level, low) -> IRQ 19
>ssb: Sonics Silicon Backplane found on PCI device 0000:03:04.0
>NET: Registered protocol family 23
>r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
>ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 22 (level, low) -> IRQ 21
>eth0: RTL8110s at 0xf8a0e800, 00:90:f5:38:12:4e, XID 04000000 IRQ 21
>nsc-ircc, chip->init
>nsc-ircc, Found chip at base=0x02e
>nsc-ircc, driver loaded (Dag Brattli)
>nsc_ircc_open(), can't get iobase of 0x3e8
>nsc-ircc, Found chip at base=0x02e
>nsc-ircc, driver loaded (Dag Brattli)
>nsc_ircc_open(), can't get iobase of 0x3e8
>pnp: Device 00:0c disabled.
>ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 21 (level, low) -> IRQ 22
>firewire_ohci: Added fw-ohci device 0000:03:01.0, OHCI version 1.10
>b43-phy0: Broadcom 4306 WLAN found
>b43-phy0 debug: Found PHY: Analog 2, Type 2, Revision 2
>b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
>phy0: Selected rate control algorithm 'pid'
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>firewire_core: created device fw0: GUID 0090f5000038124e, S400
>intel8x0_measure_ac97_clock: measured 50417 usecs
>intel8x0: clocking to 48000
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1f.6 to 64
>usbcore: registered new interface driver snd-usb-audio
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sdb1, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>fuse init (API version 7.8)
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 23 (level, low) -> IRQ 18
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized radeon 1.28.0 20060524 on minor 0
>Adding 2008116k swap on /dev/sdb3.  Priority:-1 extents:1 across:2008116k
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>r8169: eth0: link up
>r8169: eth0: link up
>r8169: eth0: link down
>r8169: eth0: link up
>audit(1202985550.149:3): audit_pid=2394 old=0 by auid=4294967295
>vmmon: module license 'unspecified' taints kernel.
>/dev/vmmon[2426]: VMCI: Driver initialized.
>/dev/vmmon[2426]: Module vmmon: registered with major=10 minor=165
>/dev/vmmon[2426]: Initial HV check: anyNotCapable=1 anyUnlocked=0 anyEnabled=0 anyDisabled=0
>/dev/vmmon[2426]: Module vmmon: initialized
>eth0: no IPv6 routers present
>/dev/vmnet: open called by PID 2478 (vmnet-bridge)
>/dev/vmnet: hub 0 does not exist, allocating memory.
>/dev/vmnet: port on hub 0 successfully opened
>bridge-eth0: enabling the bridge
>bridge-eth0: up
>bridge-eth0: already up
>bridge-eth0: attached
>/dev/vmnet: open called by PID 2494 (vmnet-dhcpd)
>/dev/vmnet: hub 1 does not exist, allocating memory.
>/dev/vmnet: port on hub 1 successfully opened
>/dev/vmnet: open called by PID 2500 (vmnet-bridge)
>/dev/vmnet: hub 2 does not exist, allocating memory.
>/dev/vmnet: port on hub 2 successfully opened
>bridge-wlan0: peer interface wlan0 not found, will wait for it to come up
>bridge-wlan0: attached
>/dev/vmnet: open called by PID 2511 (vmnet-dhcpd)
>/dev/vmnet: hub 8 does not exist, allocating memory.
>/dev/vmnet: port on hub 8 successfully opened
>/dev/vmnet: open called by PID 2516 (vmnet-natd)
>/dev/vmnet: port on hub 8 successfully opened
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>/dev/vmnet: open called by PID 2656 (vmnet-netifup)
>/dev/vmnet: port on hub 1 successfully opened
>/dev/vmnet: open called by PID 2690 (vmnet-netifup)
>/dev/vmnet: port on hub 8 successfully opened
>vmnet1: no IPv6 routers present
>vmnet8: no IPv6 routers present
>ttyS2: LSR safety check engaged!
>agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
>agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
>[drm] Setting GART location based on new memory map
>[drm] Loading R300 Microcode
>[drm] writeback test succeeded in 1 usecs
>/dev/vmnet: open called by PID 3629 (vmware-vmx)
>/dev/vmnet: port on hub 8 successfully opened
>/dev/vmmon[3631]: host clock rate change request 0 -> 19
>/dev/vmmon[3631]: host clock rate change request 19 -> 100
>/dev/vmmon[3631]: host clock rate change request 100 -> 101
>/dev/vmnet: open called by PID 3631 (vmware-vmx)
>/dev/vmnet: port on hub 8 successfully opened
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>input: AT Translated Set 2 keyboard as /class/input/input10
>input: PS/2 Mouse as /class/input/input11
>input: AlpsPS/2 ALPS GlidePoint as /class/input/input12
>/dev/vmnet: open called by PID 3631 (vmware-vmx)
>/dev/vmnet: port on hub 8 successfully opened
>/dev/vmmon[3631]: host clock rate change request 101 -> 100
>/dev/vmmon[3629]: host clock rate change request 100 -> 0
>vmmon: Had to deallocate locked 61053 pages from vm driver f7e94000
>vmmon: Had to deallocate AWE 3482 pages from vm driver f7e94000
>PM: Preparing system for mem sleep
>Stopping tasks ... done.
>PM: Entering mem sleep
>Suspending console(s)
>b43-phy0 debug: Suspending...
>b43-phy0 debug: Device suspended.
>usbfs 1-1.2:1.0: no suspend for driver usbfs?
>snd-usb-audio 3-1:1.0: no suspend for driver snd-usb-audio?
>snd-usb-audio 3-1:1.1: no suspend for driver snd-usb-audio?
>snd-usb-audio 3-1:1.2: no suspend for driver snd-usb-audio?
>snd-usb-audio 1-5:1.1: no suspend for driver snd-usb-audio?
>snd-usb-audio 1-5:1.2: no suspend for driver snd-usb-audio?
>sd 1:0:0:0: [sdb] Synchronizing SCSI cache
>sd 1:0:0:0: [sdb] Stopping disk
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>pnp: Device 00:0b disabled.
>pnp: Device 00:0a disabled.
>ACPI: PCI interrupt for device 0000:03:04.0 disabled
>ACPI: PCI interrupt for device 0000:03:02.0 disabled
>ACPI: PCI interrupt for device 0000:00:1f.6 disabled
>ACPI: PCI interrupt for device 0000:00:1f.5 disabled
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.3 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>Disabling non-boot CPUs ...
>Breaking affinity for irq 1
>Breaking affinity for irq 17
>Breaking affinity for irq 18
>Breaking affinity for irq 19
>Breaking affinity for irq 21
>Breaking affinity for irq 22
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>CPU1 is down
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Back to C!
>Force enabled HPET at resume
>Enabling non-boot CPUs ...
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07aa000 soft=c078a000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 6400.56 BogoMIPS (lpj=3200281)
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebf3ff 00000000 00000000 0000b080 00004400 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU1: Thermal monitoring enabled
>CPU1: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 09
>checking TSC synchronization [CPU#0 -> CPU#1]:
>Measured 97387255480 cycles TSC warp between CPUs, turning off TSC clock.
>Marking TSC unstable due to: check_tsc_sync_source failed.
>Time: hpet clocksource has been installed.
>CPU1 is up
>Switched to high resolution mode on CPU 1
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb2: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb3: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb4: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>usb usb5: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1f.6 to 64
>ata3.00: configured for UDMA/33
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 23 (level, low) -> IRQ 18
>ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 19 (level, low) -> IRQ 19
>PCI: Enabling device 0000:03:04.0 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 19 (level, low) -> IRQ 19
>pnp: Device 00:0a activated.
>pnp: Device 00:0b activated.
>ata2.00: configured for UDMA/100
>ata1.00: configured for UDMA/100
>sd 1:0:0:0: [sdb] 195371568 512-byte hardware sectors (100030 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] Starting disk
>sd 1:0:0:0: [sdb] Starting disk
>snd-usb-audio 1-5:1.1: no resume for driver snd-usb-audio?
>snd-usb-audio 1-5:1.2: no resume for driver snd-usb-audio?
>usbfs 1-1.2:1.0: no resume for driver usbfs?
>b43-phy0 debug: Resuming...
>b43-phy0 debug: Device resumed.
>PM: Finishing wakeup.
>Restarting tasks ... <6>usb 3-1: USB disconnect, address 2
>done.
>usb 3-1: new full speed USB device using uhci_hcd and address 3
>usb 3-1: configuration #1 chosen from 1 choice
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>input: AT Translated Set 2 keyboard as /class/input/input13
>input: PS/2 Mouse as /class/input/input14
>input: AlpsPS/2 ALPS GlidePoint as /class/input/input15
>input: Elan USB Phone as /class/input/input16
>input: USB HID v1.00 Device [Elan USB Phone] on usb-0000:00:1d.1-1
>usb 5-1: USB disconnect, address 2
>usb 5-1: new full speed USB device using uhci_hcd and address 3
>usb 5-1: configuration #1 chosen from 1 choice
>agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
>agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
>[drm] Loading R300 Microcode
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
>ata2.00: BMDMA stat 0x4
>ata2.00: cmd ca/00:10:28:e7:00/00:00:00:00:00/e8 tag 0 cdb 0x0 data 8192 out
>         res 51/84:00:37:e7:00/00:00:00:00:00/e8 Emask 0x10 (ATA bus error)
>ata2: soft resetting port
>ata2.00: configured for UDMA/100
>ata2: EH complete
>sd 1:0:0:0: [sdb] 195371568 512-byte hardware sectors (100030 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
>ata2.00: BMDMA stat 0x4
>ata2.00: cmd ca/00:10:48:8c:57/00:00:00:00:00/e1 tag 0 cdb 0x0 data 8192 out
>         res 51/84:00:57:8c:57/00:00:00:00:00/e1 Emask 0x10 (ATA bus error)
>ata2: soft resetting port
>ata2.00: configured for UDMA/100
>ata2: EH complete
>sd 1:0:0:0: [sdb] 195371568 512-byte hardware sectors (100030 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
>ata2.00: BMDMA stat 0x4
>ata2.00: cmd ca/00:00:37:d7:2d/00:00:00:00:00/e0 tag 0 cdb 0x0 data 131072 out
>         res 51/84:00:36:d8:2d/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
>ata2: soft resetting port
>ata2.00: configured for UDMA/100
>ata2: EH complete
>sd 1:0:0:0: [sdb] 195371568 512-byte hardware sectors (100030 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

Actions: View

Attachments on bug 382071: 294942 | 294943 | 294946 | 294947