Attachment 295354 Details for Bug 433554 – Boot log for kernel-xen-2.6.18-79.el5

Boot log for kernel-xen-2.6.18-79.el5

boot.kernel-xen-2.6.18-79.el5 (text/plain), 19.52 KB, created by Jeff Burke on 2008-02-19 23:19:43 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jeff Burke

Created: 2008-02-19 23:19:43 UTC

Size: 19.52 KB

patch

obsolete

>Bootdata ok (command line is ro root=/dev/VolGroup00/LogVol00 console=ttyS1,19200)
>Linux version 2.6.18-79.el5xen (brewbuilder@ls20-bc2-13.build.redhat.com) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-39)) #1 SMP Fri Feb 8 01:43:25 EST 2008
>BIOS-provided physical RAM map:
> Xen: 0000000000000000 - 0000000075f4a000 (usable)
>On node 0 totalpages: 483146
>  DMA zone: 483146 pages, LIFO batch:31
>No mptable found.
>DMI 2.3 present.
>ACPI: RSDP (v000 IBM                                   ) @ 0x00000000000fdfc0
>ACPI: RSDT (v001 IBM    SERLEWIS 0x00001000 IBM  0x45444f43) @ 0x000000007ffa7780
>ACPI: FADT (v002 IBM    SERLEWIS 0x00001000 IBM  0x45444f43) @ 0x000000007ffa76c0
>ACPI: MADT (v001 IBM    SERLEWIS 0x00001000 IBM  0x45444f43) @ 0x000000007ffa7600
>ACPI: SRAT (v001 AMD    HAMMER   0x00000001 AMD  0x00000001) @ 0x000000007ffa7540
>ACPI: DSDT (v001 IBM    SERLEWIS 0x00001000 INTL 0x02002025) @ 0x0000000000000000
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 14, version 17, address 0xfec00000, GSI 0-15
>ACPI: IOAPIC (id[0x0d] address[0xfec02000] gsi_base[16])
>IOAPIC[1]: apic_id 13, version 17, address 0xfec02000, GSI 16-31
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to xen
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:74000000)
>Built 1 zonelists.  Total pages: 483146
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 console=ttyS1,19200
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Xen reported: 1800.145 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Software IO TLB enabled: 
> Aperture:     2 megabytes
> Kernel range: 0xffff880003498000 - 0xffff880003698000
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Memory: 1871360k/1932584k available (2413k kernel code, 52432k reserved, 1350k data, 176k init)
>Calibrating delay using timer specific routine.. 4502.30 BogoMIPS (lpj=9004606)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>(SMP-)alternatives turned off
>ACPI: Core revision 20060707
>Initializing CPU#1
>Initializing CPU#2
>Brought up 4 CPUs
>sizeof(vma)=168 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=216 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=96 bytes
>sizeof(skbuff)=240 bytes
>Initializing CPU#3
>migration_cost=567
>checking if image is initramfs... it is
>failed to set up cpufreq notifier
>Grant table initialized
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:00:05.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIA.PCIB._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIC._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIF._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIG._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIH._PRT]
>ACPI: PCI Interrupt Link [LPAC] (IRQs *9)
>ACPI: PCI Interrupt Link [LPUS] (IRQs *5)
>ACPI: Blank IRQ resource
>ACPI: Resource is not an IRQ entry
>ACPI: PCI Interrupt Link [LPID] (IRQs) *0, disabled.
>ACPI: Blank IRQ resource
>ACPI: Resource is not an IRQ entry
>ACPI: PCI Interrupt Link [LPSA] (IRQs) *0, disabled.
>ACPI: Blank IRQ resource
>ACPI: Resource is not an IRQ entry
>ACPI: PCI Interrupt Link [LPSM] (IRQs) *0, disabled.
>ACPI: PCI Interrupt Link [LP00] (IRQs *10)
>ACPI: PCI Interrupt Link [LP01] (IRQs *7)
>ACPI: PCI Interrupt Link [LP02] (IRQs *10)
>ACPI: PCI Interrupt Link [LP03] (IRQs *9)
>ACPI: Blank IRQ resource
>ACPI: Resource is not an IRQ entry
>ACPI: PCI Interrupt Link [LP04] (IRQs) *0, disabled.
>ACPI: Blank IRQ resource
>ACPI: Resource is not an IRQ entry
>ACPI: PCI Interrupt Link [LP05] (IRQs) *0, disabled.
>ACPI: Blank IRQ resource
>ACPI: Resource is not an IRQ entry
>ACPI: PCI Interrupt Link [LP06] (IRQs) *0, disabled.
>ACPI: Blank IRQ resource
>ACPI: Resource is not an IRQ entry
>ACPI: PCI Interrupt Link [LP07] (IRQs) *0, disabled.
>ACPI: Blank IRQ resource
>ACPI: Resource is not an IRQ entry
>ACPI: PCI Interrupt Link [LP08] (IRQs) *0, disabled.
>ACPI: Blank IRQ resource
>ACPI: Resource is not an IRQ entry
>ACPI: PCI Interrupt Link [LP09] (IRQs) *0, disabled.
>ACPI: Blank IRQ resource
>ACPI: Resource is not an IRQ entry
>ACPI: PCI Interrupt Link [LP0A] (IRQs) *0, disabled.
>ACPI: Blank IRQ resource
>ACPI: Resource is not an IRQ entry
>ACPI: PCI Interrupt Link [LP0B] (IRQs) *0, disabled.
>ACPI: Blank IRQ resource
>ACPI: Resource is not an IRQ entry
>ACPI: PCI Interrupt Link [LP0C] (IRQs) *0, disabled.
>ACPI: Blank IRQ resource
>ACPI: Resource is not an IRQ entry
>ACPI: PCI Interrupt Link [LP0D] (IRQs) *0, disabled.
>ACPI: Blank IRQ resource
>ACPI: Resource is not an IRQ entry
>ACPI: PCI Interrupt Link [LP0E] (IRQs) *0, disabled.
>ACPI: Blank IRQ resource
>ACPI: Resource is not an IRQ entry
>ACPI: PCI Interrupt Link [LP0F] (IRQs) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 11 devices
>xen_mem: Initialising balloon driver.
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:01: ioport range 0x510-0x517 could not be reserved
>pnp: 00:01: ioport range 0x504-0x507 could not be reserved
>pnp: 00:01: ioport range 0x500-0x503 could not be reserved
>pnp: 00:01: ioport range 0x520-0x53f has been reserved
>pnp: 00:01: ioport range 0x540-0x547 has been reserved
>pnp: 00:01: ioport range 0x460-0x461 has been reserved
>PCI: Bridge: 0000:01:0d.0
>  IO window: disabled.
>  MEM window: e2000000-e6ffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: e2000000-e7ffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:06.0
>  IO window: 4000-4fff
>  MEM window: df000000-e00fffff
>  PREFETCH window: 88000000-880fffff
>PCI: Bridge: 0000:00:07.0
>  IO window: disabled.
>  MEM window: dd000000-ddffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:08.0
>  IO window: disabled.
>  MEM window: dc000000-dcffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:09.0
>  IO window: disabled.
>  MEM window: db000000-dbffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:0a.0
>  IO window: disabled.
>  MEM window: da000000-daffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:0b.0
>  IO window: disabled.
>  MEM window: d9000000-d9ffffff
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>audit: initializing netlink socket (disabled)
>audit(1203438971.712:1): initialized
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key A88F6E01F1F7DD22
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU3] (supports 8 throttling states)
>ACPI: Processor [CPU2] (supports 8 throttling states)
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Processor [CPU0] (supports 8 throttling states)
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Xen virtual console successfully installed as ttyS0
>Event-channel device installed.
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>Probing IDE interface ide0...
>Probing IDE interface ide1...
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 4 Dual-Core AMD Opteron(tm) Processor 2210 HE processors (4 cpu cores) (version 2.20.00)
>powernow-k8: Your BIOS does not provide _PSS objects.  PowerNow! does not work on SMP systems without _PSS objects.  Complain to your BIOS vendor.
>powernow-k8: Your BIOS does not provide _PSS objects.  PowerNow! does not work on SMP systems without _PSS objects.  Complain to your BIOS vendor.
>powernow-k8: Your BIOS does not provide _PSS objects.  PowerNow! does not work on SMP systems without _PSS objects.  Complain to your BIOS vendor.
>powernow-k8: Your BIOS does not provide _PSS objects.  PowerNow! does not work on SMP systems without _PSS objects.  Complain to your BIOS vendor.
>Write protecting the kernel read-only data: 460k
>ACPI: PCI Interrupt Link [LPUS] enabled at IRQ 5
>ACPI: PCI Interrupt 0000:00:03.2[A] -> Link [LPUS] -> GSI 5 (level, low) -> IRQ 5
>ehci_hcd 0000:00:03.2: EHCI Host Controller
>ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:03.2: irq 5, io mem 0xf3ffd000
>ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LPUS] -> GSI 5 (level, low) -> IRQ 5
>ohci_hcd 0000:00:03.0: OHCI Host Controller
>ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:03.0: irq 5, io mem 0xf3fff000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LPUS] -> GSI 5 (level, low) -> IRQ 5
>ohci_hcd 0000:00:03.1: OHCI Host Controller
>ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:03.1: irq 5, io mem 0xf3ffe000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 1-4: new high speed USB device using ehci_hcd and address 2
>USB Universal Host Controller Interface driver v3.0
>SCSI subsystem initialized
>usb 1-4: configuration #1 chosen from 1 choice
>hub 1-4:1.0: USB hub found
>hub 1-4:1.0: 2 ports detected
>Fusion MPT base driver 3.04.05
>Copyright (c) 1999-2007 LSI Corporation
>Fusion MPT SAS Host driver 3.04.05
>GSI 16 sharing vector 0x98 and IRQ 16
>ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 19 (level, low) -> IRQ 16
>mptbase: ioc0: Initiating bringup
>ioc0: LSISAS1064 A3: Capabilities={Initiator}
>scsi0 : ioc0: LSISAS1064 A3, FwRev=000a0f00h, Ports=1, MaxQ=511, IRQ=16
>  Vendor: IBM-ESXS  Model: MAY2036RC         Rev: T106
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB)
>sda: Write Protect is off
>sda: Mode Sense: d7 00 00 08
>SCSI device sda: drive cache: write through
>SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB)
>sda: Write Protect is off
>sda: Mode Sense: d7 00 00 08
>SCSI device sda: drive cache: write through
> sda: sda1 sda2
>sd 0:0:0:0: Attached scsi disk sda
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1203438982.732:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>security:  3 users, 6 roles, 1673 types, 213 bools, 1 sens, 1024 cats
>security:  61 classes, 59423 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1203438983.068:3): policy loaded auid=4294967295 ses=4294967295
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.6.9 (December 8, 2007)
>GSI 17 sharing vector 0xA0 and IRQ 17
>ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 17 (level, low) -> IRQ 17
>input: PC Speaker as /class/input/input0
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>EDAC MC: Ver: 2.0.1 Feb  8 2008
>8250_pnp: Unknown symbol serial8250_unregister_port
>8250_pnp: Unknown symbol serial8250_register_port
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>8250_pnp: Unknown symbol serial8250_unregister_port
>8250_pnp: Unknown symbol serial8250_register_port
>Floppy drive(s): fd0 is 1.44M
>eth0: Broadcom NetXtreme II BCM5706 1000Base-SX (A2) PCI-X 64-bit 100MHz found at mem e2000000, IRQ 17, node addr 00145e6d30fc
>GSI 18 sharing vector 0xA8 and IRQ 18
>ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 18 (level, low) -> IRQ 18
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>eth1: Broadcom NetXtreme II BCM5706 1000Base-SX (A2) PCI-X 64-bit 100MHz found at mem e4000000, IRQ 18, node addr 00145eb300fc
>EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
>EDAC MC1: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:19.2
>piix4_smbus 0000:00:02.0: Found 0000:00:02.0 device
>floppy0: no floppy controllers found
>Floppy drive(s): fd0 is 1.44M
>floppy0: no floppy controllers found
>lp: driver loaded but no devices found
>ACPI: Power Button (FF) [PWRF]
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:2031608k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.base_reachable_time; Use net.ipv6.neigh.lo.base_reachable_time_ms instead.
>PCI-DMA: Out of SW-IOMMU space for 65536 bytes at device 0000:03:04.0
>PCI-DMA: Out of SW-IOMMU space for 65536 bytes at device 0000:03:04.0
>PCI-DMA: Out of SW-IOMMU space for 65536 bytes at device 0000:03:04.0
>PCI-DMA: Out of SW-IOMMU space for 65536 bytes at device 0000:03:04.0
>PCI-DMA: Out of SW-IOMMU space for 65536 bytes at device 0000:03:04.0
>PCI-DMA: Out of SW-IOMMU space for 65536 bytes at device 0000:03:04.0
>PCI-DMA: Out of SW-IOMMU space for 65536 bytes at device 0000:03:04.0
>PCI-DMA: Out of SW-IOMMU space for 65536 bytes at device 0000:03:04.0
>PCI-DMA: Out of SW-IOMMU space for 8192 bytes at device 0000:03:04.0
>PCI-DMA: Out of SW-IOMMU space for 16384 bytes at device 0000:03:04.0
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex
>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: Core ver 2.10
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>eth1: no IPv6 routers present
>Bridge firewalling registered
>virbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack
>xenbr1: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>device vif0.1 entered promiscuous mode
>xenbr1: port 1(vif0.1) entering learning state
>xenbr1: topology change detected, propagating
>xenbr1: port 1(vif0.1) entering forwarding state
>ADDRCONF(NETDEV_UP): peth1: link is not ready
>bnx2: peth1 NIC SerDes Link is Up, 1000 Mbps full duplex
>ADDRCONF(NETDEV_CHANGE): peth1: link becomes ready
>device peth1 entered promiscuous mode
>virbr0: no IPv6 routers present
>xenbr1: port 2(peth1) entering learning state
>xenbr1: topology change detected, propagating
>xenbr1: port 2(peth1) entering forwarding state
>eth1: no IPv6 routers present

Actions: View

Attachments on bug 433554: 295354 | 295355 | 295526 | 298053 | 299461