Attachment 295552 Details for Bug 395441 – dmesg output

dmesg output

080220_12xx.dmesg (text/plain), 23.26 KB, created by Wojciech Pilorz on 2008-02-21 18:51:58 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Wojciech Pilorz

Created: 2008-02-21 18:51:58 UTC

Size: 23.26 KB

patch

obsolete

>Linux version 2.6.23.15-137.fc8 (mockbuild@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Sun Feb 10 17:48:34 EST 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000000f7f0000 (usable)
> BIOS-e820: 000000000f7f0000 - 000000000f800000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>247MB LOWMEM available.
>found SMP MP-table at 000f9bf0
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 63472) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->    63472
>  HighMem     63472 ->    63472
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->    63472
>On node 0 totalpages: 63472
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 463 pages used for memmap
>  Normal zone: 58913 pages, LIFO batch:15
>  HighMem zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000EAA10, 0014 (r0 COMPAQ)
>ACPI: RSDT 000E6740, 007C (r1 COMPAQ CPQ0050  20020815             0)
>ACPI: FACP 000E67F8, 0074 (r1 COMPAQ BROOKDG         1             0)
>ACPI: DSDT 000E68C6, 0B73 (r1 COMPAQ     DSDT        1 MSFT  100000E)
>ACPI: FACS 000E6700, 0040
>ACPI: SSDT 000E7439, 073D (r1 COMPAQ  PROJECT        1 MSFT  100000E)
>ACPI: SSDT 000E7B76, 053A (r1 COMPAQ CORE_PNP        1 MSFT  100000E)
>ACPI: SSDT 000E80B0, 019B (r1 COMPAQ CORE_UTL        1 MSFT  100000E)
>ACPI: SSDT 000E824B, 0308 (r1 COMPAQ VILLTBL1        1 MSFT  100000E)
>ACPI: SSDT 000E8553, 053F (r1 COMPAQ LGCYLITE        1 MSFT  100000E)
>ACPI: SSDT 000E8A92, 0167 (r1 COMPAQ    UART2        1 MSFT  100000E)
>ACPI: SSDT 000E8BF9, 014E (r1 COMPAQ   FLOPPY        1 MSFT  100000E)
>ACPI: APIC 000E686C, 005A (r1 COMPAQ BROOKDG         1             0)
>ACPI: SSDT 000EA6BE, 00B2 (r1 COMPAQ     APIC        1 MSFT  100000E)
>ACPI: SSDT 000E91B5, 0424 (r1 COMPAQ PNP_PRSS        1 MSFT  100000E)
>ACPI: SSDT 000E95D9, 016D (r1 COMPAQ UR2_PRSS        1 MSFT  100000E)
>ACPI: SSDT 000E9746, 0119 (r1 COMPAQ FPY_PRSS        1 MSFT  100000E)
>ACPI: SSDT 000E98F7, 0135 (r1 COMPAQ       S3        1 MSFT  100000E)
>ACPI: SSDT 000E9A2C, 013B (r1 COMPAQ  CORE_S3        1 MSFT  100000E)
>ACPI: SSDT 000E9B67, 0173 (r1 COMPAQ   PIDETM        1 MSFT  100000E)
>ACPI: SSDT 000E9E52, 0180 (r1 COMPAQ     GTF0        1 MSFT  100000E)
>ACPI: SSDT 000E9CDA, 0178 (r1 COMPAQ   SIDETM        1 MSFT  100000E)
>ACPI: SSDT 000EA157, 0185 (r1 COMPAQ     GTF2        1 MSFT  100000E)
>ACPI: SSDT 000EA770, 00E9 (r1 COMPAQ WN98SCSI        1 MSFT  100000E)
>ACPI: SSDT 000EA461, 00F0 (r1 COMPAQ      L08        1 MSFT  100000E)
>ACPI: SSDT 000EA859, 0053 (r1 COMPAQ    FINIS        1 MSFT  100000E)
>ACPI: PM-Timer IO Port: 0xf808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:1 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 10000000 (gap: 0f800000:ef400000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
>swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
>Built 1 zonelists in Zone order.  Total pages: 62977
>Kernel command line: ro root=LABEL=/ rhgb quiet nohz=off
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07a9000 soft=c0789000
>PID hash table entries: 1024 (order: 10, 4096 bytes)
>Detected 1993.598 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
>Memory: 243692k/253888k available (2187k kernel code, 9628k reserved, 1118k data, 280k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xd0000000 - 0xff7fe000   ( 759 MB)
>    lowmem  : 0xc0000000 - 0xcf7f0000   ( 247 MB)
>      .init : 0xc0740000 - 0xc0786000   ( 280 kB)
>      .data : 0xc0622d15 - 0xc073a544   (1118 kB)
>      .text : 0xc0400000 - 0xc0622d15   (2187 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 3989.69 BogoMIPS (lpj=1994849)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 256K
>CPU: Hyper-Threading is disabled
>CPU: After all inits, caps: 3febf3ff 00000000 00000000 0000b080 00000000 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>CPU0: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 02
>Total of 1 processors activated (3989.69 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=1552 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 12:00:01  Date: 02/20/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.20 entry at 0xeca48, last bus=5
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>* The chipset may have PM-Timer Bug. Due to workarounds for a bug,
>* this clock source is slow. If you are sure your timer does not have
>* this bug, please use "acpi_pm_good" to disable the workaround
>PCI quirk: region f800-f87f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region fa00-fa3f claimed by ICH4 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 14 15)
>ACPI: Power Resource [X1PR] (on)
>ACPI: Power Resource [X0PR] (on)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>Time: tsc clocksource has been installed.
>pnp: 00:0c: ioport range 0x4d0-0x4d1 has been reserved
>pnp: 00:0d: ioport range 0x400-0x41f has been reserved
>pnp: 00:0d: ioport range 0x420-0x43f has been reserved
>pnp: 00:0d: ioport range 0x440-0x45f has been reserved
>pnp: 00:0d: ioport range 0x460-0x47f has been reserved
>pnp: 00:0d: ioport range 0xf800-0xf81f has been reserved
>pnp: 00:0d: ioport range 0xf820-0xf83f has been reserved
>pnp: 00:0d: ioport range 0xf840-0xf85f has been reserved
>pnp: 00:0d: ioport range 0xf860-0xf87f has been reserved
>pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:0e: iomem range 0x100000-0xf7fffff could not be reserved
>pnp: 00:0e: iomem range 0xf800000-0xf8fffff has been reserved
>pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved
>PCI: Bridge: 0000:00:1e.0
>  IO window: 1000-1fff
>  MEM window: f9200000-f95fffff
>  PREFETCH window: f9900000-f9bfffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
>TCP established hash table entries: 8192 (order: 4, 98304 bytes)
>TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
>TCP: Hash tables configured (established 8192 bind 8192)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2957k freed
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1203508801.556:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 433CDEB37FB53040
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>PCI: Firmware left 0000:05:04.0 e100 interrupts enabled, disabling
>PCI: Firmware left 0000:05:08.0 e100 interrupts enabled, disabling
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU0] (supports 8 throttling states)
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected an Intel 830M Chipset.
>agpgart: Detected 8060K stolen memory.
>agpgart: AGP aperture is 128M @ 0xf0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 12:709:26
>Freeing unused kernel memory: 280k freed
>Write protecting the kernel read-only data: 850k
>PCI: Enabling device 0000:00:1d.7 (0104 -> 0106)
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 16, io mem 0x10000000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>PCI: Enabling device 0000:00:1d.0 (0004 -> 0005)
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 17, io base 0x00002440
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>PCI: Enabling device 0000:00:1d.1 (0004 -> 0005)
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 18, io base 0x00002460
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 1-2: new high speed USB device using ehci_hcd and address 2
>input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
>SCSI subsystem initialized
>usb 1-2: configuration #1 chosen from 1 choice
>libata version 2.21 loaded.
>ata_piix 0000:00:1f.1: version 2.12
>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000124a0 irq 14
>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000124a8 irq 15
>ata1.00: ATA-5: MAXTOR 6L020J1, A93.0500, max UDMA/100
>ata1.00: 39102336 sectors, multi 16: LBA 
>ata1.00: configured for UDMA/100
>ata2.00: ATAPI: Compaq  CRD-8484B, 1.06, max MWDMA2
>ata2.00: configured for MWDMA2
>scsi 0:0:0:0: Direct-Access     ATA      MAXTOR 6L020J1   A93. PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 39102336 512-byte hardware sectors (20020 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 39102336 512-byte hardware sectors (20020 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            COMPAQ   CD-ROM CRD-8484B 1.06 PQ: 0 ANSI: 5
>ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 18 (level, low) -> IRQ 19
>scsi: ***** BusLogic SCSI Driver Version 2.1.16 of 18 July 2002 *****
>scsi: Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
>scsi2: Configuring BusLogic Model BT-946C PCI SCSI Host Adapter
>scsi2:   Firmware Version: 4.28D, I/O Address: 0x1060, IRQ Channel: 19/Level
>scsi2:   PCI Bus: 5, Device: 9, Address: Unassigned, Host Adapter SCSI ID: 7
>scsi2:   Parity Checking: Enabled, Extended Translation: Disabled
>scsi2:   Synchronous Negotiation: Disabled, Wide Negotiation: Disabled
>scsi2:   Disconnect/Reconnect: Disabled, Tagged Queuing: Disabled
>scsi2:   Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211
>scsi2:   Driver Queue Depth: 211, Host Adapter Queue Depth: 100
>scsi2:   Tagged Queue Depth: Automatic, Untagged Queue Depth: 3
>scsi2:   SCSI Bus Termination: Enabled
>scsi2: *** BusLogic BT-946C Initialized Successfully ***
>scsi2 : BusLogic BT-946C
>scsi: waiting for bus probes to complete ...
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1203508813.495:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  8 users, 11 roles, 2359 types, 114 bools, 1 sens, 1024 cats
>security:  67 classes, 212743 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda3, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1203508814.017:3): policy loaded auid=4294967295
>sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>input: PC Speaker as /class/input/input3
>iTCO_vendor_support: vendor-support=0
>i810_smbus 0000:00:02.0: i810/i815 i2c device found.
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>input: Power Button (FF) as /class/input/input4
>iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0xf860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PBTN]
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>Initializing USB Mass Storage driver...
>scsi3 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
>e100: Copyright(c) 1999-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 16 (level, low) -> IRQ 17
>intel_rng: Firmware space is locked read-only. If you can't or
>intel_rng: don't want to disable this in firmware setup, and if
>intel_rng: you are certain that your system has a functional
>intel_rng: RNG, try using the 'no_fwh_detect' option.
>e100: eth0: e100_probe: addr 0xf9900000, irq 17, MAC addr 00:50:8B:5C:03:21
>ACPI: PCI Interrupt 0000:05:08.0[A] -> GSI 20 (level, low) -> IRQ 20
>parport_pc 00:07: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>e100: eth1: e100_probe: addr 0xf9500000, irq 20, MAC addr 00:08:02:B5:07:54
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>AC'97 0 analog subsections not ready
>intel8x0_measure_ac97_clock: measured 50885 usecs
>intel8x0: clocking to 48000
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>usb-storage: device scan complete
>scsi 3:0:0:0: Direct-Access              USB FLASH DRIVE  PMAP PQ: 0 ANSI: 0 CCS
>sd 3:0:0:0: [sdb] 8060928 512-byte hardware sectors (4127 MB)
>sd 3:0:0:0: [sdb] Write Protect is off
>sd 3:0:0:0: [sdb] Mode Sense: 23 00 00 00
>sd 3:0:0:0: [sdb] Assuming drive cache: write through
>sd 3:0:0:0: [sdb] 8060928 512-byte hardware sectors (4127 MB)
>sd 3:0:0:0: [sdb] Write Protect is off
>sd 3:0:0:0: [sdb] Mode Sense: 23 00 00 00
>sd 3:0:0:0: [sdb] Assuming drive cache: write through
> sdb: sdb1
>sd 3:0:0:0: [sdb] Attached SCSI removable disk
>sd 3:0:0:0: Attached scsi generic sg2 type 0
>EXT3 FS on sda3, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-1, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-2, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-4, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-3, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-5, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17
>Adding 566960k swap on /dev/sda5.  Priority:-1 extents:1 across:566960k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>e100: eth1: e100_watchdog: link up, 100Mbps, half-duplex
>audit(1203505250.774:4): audit_pid=2006 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>eth1: no IPv6 routers present
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdb1, type ext3), uses xattr

Actions: View

Attachments on bug 395441: 293492 | 293497 | 295551 | 295552 | 295553 | 298786