Attachment 295569 Details for Bug 432270 – dmesg old kernel (OK)

dmesg old kernel (OK)

dmesg.OK (text/plain), 23.26 KB, created by Vlado Potisk on 2008-02-21 23:13:56 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Vlado Potisk

Created: 2008-02-21 23:13:56 UTC

Size: 23.26 KB

patch

obsolete

>Linux version 2.6.23.14-107.fc8 (mockbuild@xenbuilder1.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Mon Jan 14 22:07:11 EST 2008
>Command line: ro root=/dev/mirror_vg/root quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
> BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
> BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 262128) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.3 present.
>ACPI: RSDP 000F9100, 0014 (r0 Nvidia)
>ACPI: RSDT 3FFF3040, 0038 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP 3FFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT 3FFF3180, 63F4 (r1 NVIDIA AWRDACPI     1000 MSFT  100000E)
>ACPI: FACS 3FFF0000, 0040
>ACPI: SSDT 3FFF9680, 00F7 (r1 PTLTD  POWERNOW        1  LTP        1)
>ACPI: SRAT 3FFF97C0, 0090 (r1 AMD    HAMMER          1 AMD         1)
>ACPI: MCFG 3FFF98C0, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: APIC 3FFF95C0, 0072 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>SRAT: PXM 0 -> APIC 0 -> Node 0
>SRAT: Node 0 PXM 0 0-a0000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>SRAT: Node 0 PXM 0 0-40000000
>Entering add_active_range(0, 0, 159) 1 entries of 3200 used
>Entering add_active_range(0, 256, 262128) 1 entries of 3200 used
>NUMA: Using 63 for the hash shift.
>Bootmem setup node 0 0000000000000000-000000003fff0000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   262128
>On node 0 totalpages: 262031
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1316 pages reserved
>  DMA zone: 2627 pages, LIFO batch:0
>  DMA32 zone: 3527 pages used for memmap
>  DMA32 zone: 254505 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
>SMP: Allowing 2 CPUs, 1 hotplug CPUs
>PERCPU: Allocating 41688 bytes of per cpu data
>Built 1 zonelists in Node order.  Total pages: 257132
>Policy zone: DMA32
>Kernel command line: ro root=/dev/mirror_vg/root quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC calibrated against PM_TIMER
>time.c: Detected 2211.327 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Checking aperture...
>CPU 0: aperture @ 216a000000 size 32 MB
>Aperture too small (32 MB)
>No AGP bridge found
>Memory: 1024180k/1048512k available (2443k kernel code, 23944k reserved, 1380k data, 324k init)
>SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>Calibrating delay using timer specific routine.. 4424.00 BogoMIPS (lpj=2212002)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0/0 -> Node 0
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>APIC timer calibration result 12564379
>Detected 12.564 MHz APIC timer.
>Brought up 1 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=2080 bytes
>Time: 22:44:36  Date: 02/21/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Transparent bridge - 0000:00:09.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LUB2] (IRQs *3 4 5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
>ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>Time: tsc clocksource has been installed.
>pnp: 00:01: ioport range 0x4000-0x407f has been reserved
>pnp: 00:01: ioport range 0x4080-0x40ff has been reserved
>pnp: 00:01: ioport range 0x4400-0x447f has been reserved
>pnp: 00:01: ioport range 0x4480-0x44ff has been reserved
>pnp: 00:01: ioport range 0x4800-0x487f has been reserved
>pnp: 00:01: ioport range 0x4880-0x48ff has been reserved
>pnp: 00:0b: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:0c: iomem range 0xf0000-0xf3fff could not be reserved
>pnp: 00:0c: iomem range 0xf4000-0xf7fff could not be reserved
>pnp: 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
>pnp: 00:0c: iomem range 0xfc000-0xfffff could not be reserved
>PCI: Bridge: 0000:00:09.0
>  IO window: d000-dfff
>  MEM window: fea00000-feafffff
>  PREFETCH window: fd000000-fdffffff
>PCI: Bridge: 0000:00:0b.0
>  IO window: c000-cfff
>  MEM window: fe900000-fe9fffff
>  PREFETCH window: fe800000-fe8fffff
>PCI: Bridge: 0000:00:0c.0
>  IO window: b000-bfff
>  MEM window: fe700000-fe7fffff
>  PREFETCH window: fe600000-fe6fffff
>PCI: Bridge: 0000:00:0d.0
>  IO window: a000-afff
>  MEM window: fe500000-fe5fffff
>  PREFETCH window: fe400000-fe4fffff
>PCI: Bridge: 0000:00:0e.0
>  IO window: 9000-9fff
>  MEM window: fe300000-fe3fffff
>  PREFETCH window: fe200000-fe2fffff
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>PCI: Setting latency timer of device 0000:00:0c.0 to 64
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 4097k freed
>audit: initializing netlink socket (disabled)
>audit(1203633876.444:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 9D330118D0496200
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Found disabled HT MSI Mapping on 0000:00:0b.0
>PCI: Found enabled HT MSI Mapping on 0000:00:00.0
>PCI: Found disabled HT MSI Mapping on 0000:00:0c.0
>PCI: Found enabled HT MSI Mapping on 0000:00:00.0
>PCI: Found disabled HT MSI Mapping on 0000:00:0d.0
>PCI: Found enabled HT MSI Mapping on 0000:00:00.0
>PCI: Found disabled HT MSI Mapping on 0000:00:0e.0
>PCI: Found enabled HT MSI Mapping on 0000:00:00.0
>Boot video device is 0000:01:07.0
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0b.0:pcie00]
>PCI: Setting latency timer of device 0000:00:0c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0c.0:pcie00]
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0d.0:pcie00]
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0e.0:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Fan [FAN] (on)
>ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI: Thermal Zone [THRM] (22 C)
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>Switched to high resolution mode on CPU 0
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3500+ processors (1 cpu cores) (version 2.00.00)
>powernow-k8:    0 : fid 0xe (2200 MHz), vid 0x6
>powernow-k8:    1 : fid 0xc (2000 MHz), vid 0x8
>powernow-k8:    2 : fid 0xa (1800 MHz), vid 0xa
>powernow-k8:    3 : fid 0x2 (1000 MHz), vid 0x12
>  Magic number: 12:571:755
>Freeing unused kernel memory: 324k freed
>Write protecting the kernel read-only data: 1020k
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:02.1 to 64
>ehci_hcd 0000:00:02.1: EHCI Host Controller
>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:02.1: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:02.1
>ehci_hcd 0000:00:02.1: irq 23, io mem 0xfeb00000
>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:02.0: irq 22, io mem 0xfebff000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 10 ports detected
>USB Universal Host Controller Interface driver v3.0
>md: raid1 personality registered for level 1
>xor: automatically using best checksumming function: generic_sse
>   generic_sse:  7084.000 MB/sec
>xor: using function: generic_sse (7084.000 MB/sec)
>async_tx: api initialized (async)
>raid6: int64x1   1886 MB/s
>raid6: int64x2   2609 MB/s
>raid6: int64x4   1996 MB/s
>raid6: int64x8   1984 MB/s
>raid6: sse2x1    2781 MB/s
>raid6: sse2x2    3664 MB/s
>raid6: sse2x4    4085 MB/s
>raid6: using algorithm sse2x4 (4085 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>SCSI subsystem initialized
>libata version 2.21 loaded.
>sata_nv 0000:00:07.0: version 3.5
>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21
>sata_nv 0000:00:07.0: Using ADMA mode
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>scsi0 : sata_nv
>scsi1 : sata_nv
>ata1: SATA max UDMA/133 cmd 0xffffc200005f0480 ctl 0xffffc200005f04a0 bmdma 0x000000000001f600 irq 21
>ata2: SATA max UDMA/133 cmd 0xffffc200005f0580 ctl 0xffffc200005f05a0 bmdma 0x000000000001f608 irq 21
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-7: WDC WD3200YS-01PGB0, 21.00M21, max UDMA/133
>ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 1)
>ata1.00: configured for UDMA/133
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2.00: ATA-7: WDC WD3200YS-01PGB0, 21.00M21, max UDMA/133
>ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 1)
>ata2.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200YS-01P 21.0 PQ: 0 ANSI: 5
>ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
>sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: Direct-Access     ATA      WDC WD3200YS-01P 21.0 PQ: 0 ANSI: 5
>ata2: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
>sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 sdb3
>sd 1:0:0:0: [sdb] Attached SCSI disk
>ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 20
>sata_nv 0000:00:08.0: Using ADMA mode
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>scsi2 : sata_nv
>scsi3 : sata_nv
>ata3: SATA max UDMA/133 cmd 0xffffc200005f2480 ctl 0xffffc200005f24a0 bmdma 0x000000000001f100 irq 20
>ata4: SATA max UDMA/133 cmd 0xffffc200005f2580 ctl 0xffffc200005f25a0 bmdma 0x000000000001f108 irq 20
>ata3: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 300)
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>pata_amd 0000:00:06.0: version 0.3.9
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>scsi4 : pata_amd
>scsi5 : pata_amd
>ata5: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001fb00 irq 14
>ata6: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001fb08 irq 15
>ata6.00: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL13, max UDMA/33
>ata6.00: configured for UDMA/33
>scsi 5:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4167B DL13 PQ: 0 ANSI: 5
>md: md2 stopped.
>md: bind<sdb2>
>md: bind<sda2>
>raid1: raid set md2 active with 2 out of 2 mirrors
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>security:  8 users, 12 roles, 2347 types, 114 bools, 1 sens, 1024 cats
>security:  67 classes, 215517 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1203633886.269:2): policy loaded auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>sr 5:0:0:0: Attached scsi generic sg2 type 5
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 5:0:0:0: Attached scsi CD-ROM sr0
>i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
>i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>forcedeth: using HIGHDMA
>input: Power Button (FF) as /class/input/input2
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input3
>ACPI: Power Button (CM) [PWRB]
>eth0: forcedeth.c: subsystem: 01462:7125 bound to 0000:00:0a.0
>ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
>ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>sky2 0000:03:00.0: v1.18 addr 0xfe7fc000 irq 16 Yukon-EC (0xb6) rev 1
>sky2 eth1: addr 00:11:09:d5:15:9e
>FDC 0 is a post-1991 82077
>input: PC Speaker as /class/input/input4
>net eth0_rename: device_rename: sysfs_create_symlink failed (-17)
>net eth0: device_rename: sysfs_create_symlink failed (-17)
>udev: renamed network interface eth1 to eth0
>ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
>ACPI: PCI Interrupt 0000:01:0c.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
>net eth1: device_rename: sysfs_create_symlink failed (-17)
>udev: renamed network interface eth0_rename to eth1
>parport_pc 00:09: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
>firewire_ohci: Added fw-ohci device 0000:01:0c.0, OHCI version 1.0
>usbcore: registered new interface driver snd-usb-audio
>ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>firewire_core: created new fw device fw0 (0 config rom retries, S400)
>intel8x0_measure_ac97_clock: measured 50700 usecs
>intel8x0: clocking to 46800
>md: md1 stopped.
>md: bind<sdb1>
>md: bind<sda1>
>raid1: raid set md1 active with 2 out of 2 mirrors
>EXT3 FS on dm-0, internal journal
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev md1, type ext2), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-2, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-7, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-7, type ext3), uses xattr
>SELinux: initialized (dev dm-8, type ext2), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-3, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-4, type ext3), uses xattr
>Adding 1572856k swap on /dev/mapper/crypt-swap.  Priority:-1 extents:1 across:1572856k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts

Actions: View

Attachments on bug 432270: 294507 | 295569 | 295570