Attachment 295642 Details for Bug 434308 – dmesg on 2.6.24.2-10.fc8

dmesg on 2.6.24.2-10.fc8

dmesg-2.6.24.2-10.fc8.log (text/plain), 22.07 KB, created by Mamoru TASAKA on 2008-02-22 15:57:48 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Mamoru TASAKA

Created: 2008-02-22 15:57:48 UTC

Size: 22.07 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.24.2-10.fc8 (mockbuild@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Thu Feb 21 15:29:00 EST 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved)
> BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS)
> BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000002ef40000 (usable)
> BIOS-e820: 000000002ef40000 - 000000002ef50000 (ACPI data)
> BIOS-e820: 000000002ef50000 - 000000002f000000 (reserved)
> BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved)
> BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
> BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>751MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 192320) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   192320
>  HighMem    192320 ->   192320
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   192320
>On node 0 totalpages: 192320
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1470 pages used for memmap
>  Normal zone: 186754 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000F0180, 0014 (r0 TOSHIB)
>ACPI: RSDT 2EF40000, 0038 (r1 TOSHIB 750        970814 TASM  4010000)
>ACPI: FACP 2EF40060, 0084 (r2 TOSHIB 750      20030101 TASM  4010000)
>ACPI: DSDT 2EF40118, 44B9 (r1 TOSHIB A0015    20040426 MSFT  100000E)
>ACPI: FACS 000EEE00, 0040
>ACPI: SSDT 2EF445D1, 0231 (r1 TOSHIB LNK10SS  20040226 MSFT  100000E)
>ACPI: DBGP 2EF400E4, 0034 (r1 TOSHIB 750        970814 TASM  4010000)
>ACPI: BOOT 2EF40038, 0028 (r1 TOSHIB 750        970814 TASM  4010000)
>ACPI: SSDT 2EF44802, 06C4 (r1 TOSHIB A0015    20040226 MSFT  100000E)
>ACPI: DMI detected: Toshiba
>ACPI: PM-Timer IO Port: 0xd808
>Allocating PCI resources starting at 30000000 (gap: 2f000000:cfc10000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
>swsusp: Registered nosave memory region: 00000000000e0000 - 00000000000ee000
>swsusp: Registered nosave memory region: 00000000000ee000 - 00000000000ef000
>swsusp: Registered nosave memory region: 00000000000ef000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 190818
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 vga=791
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffb000 (015ef000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07ba000 soft=c079a000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1596.031 MHz processor.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 754212k/769280k available (2238k kernel code, 14520k reserved, 1131k data, 284k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xef800000 - 0xff7fe000   ( 255 MB)
>    lowmem  : 0xc0000000 - 0xeef40000   ( 751 MB)
>      .init : 0xc0750000 - 0xc0797000   ( 284 kB)
>      .data : 0xc062f8e9 - 0xc074a724   (1131 kB)
>      .text : 0xc0400000 - 0xc062f8e9   (2238 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 3193.16 BogoMIPS (lpj=1596583)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 00000000
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: After all inits, caps: afe9f1bf 00000000 00000000 00002040 00000180 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>ACPI: setting ELCR to 0200 (from 0e00)
>CPU0: Intel(R) Pentium(R) M processor 1.60GHz stepping 06
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1680 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000001
>  groups: 00000001
>net_namespace: 64 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 22:29:50  Date: 02/22/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd480, last bus=3
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region d800-d87f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region eec0-eeff claimed by ICH4 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *11)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11)
>ACPI: Power Resource [PFAN] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnpacpi: exceeded the max number of IO resources: 40 
>pnp: PnP ACPI: found 9 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 4 of device 0000:00:1d.0
>PCI: Cannot allocate resource region 4 of device 0000:00:1d.1
>PCI: Cannot allocate resource region 4 of device 0000:00:1d.2
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>Time: tsc clocksource has been installed.
>system 00:00: iomem range 0x0-0x9ffff could not be reserved
>system 00:00: iomem range 0xe0000-0xeffff could not be reserved
>system 00:00: iomem range 0xf0000-0xfffff could not be reserved
>system 00:00: iomem range 0x100000-0x2ef3ffff could not be reserved
>system 00:00: iomem range 0x2ef40000-0x2ef4ffff could not be reserved
>system 00:00: iomem range 0x2ef50000-0x2effffff could not be reserved
>system 00:00: iomem range 0xfec10000-0xfec1ffff could not be reserved
>system 00:00: iomem range 0xfeda0000-0xfedbffff could not be reserved
>system 00:00: iomem range 0xffb80000-0xffbfffff could not be reserved
>system 00:00: iomem range 0xfff00000-0xffffffff could not be reserved
>system 00:08: ioport range 0x1e0-0x1e7 has been reserved
>system 00:08: ioport range 0x480-0x48f has been reserved
>system 00:08: ioport range 0x680-0x6ff has been reserved
>system 00:08: ioport range 0xd800-0xd87f has been reserved
>system 00:08: ioport range 0xd880-0xd89f has been reserved
>system 00:08: ioport range 0xd8a0-0xd8bf has been reserved
>system 00:08: ioport range 0xe000-0xe07f has been reserved
>system 00:08: ioport range 0xe080-0xe0ff has been reserved
>system 00:08: ioport range 0xe400-0xe47f has been reserved
>system 00:08: ioport range 0xe480-0xe4ff has been reserved
>system 00:08: ioport range 0xe800-0xe87f has been reserved
>system 00:08: ioport range 0xe880-0xe8ff has been reserved
>system 00:08: ioport range 0xec00-0xec7f has been reserved
>system 00:08: ioport range 0xec80-0xecff has been reserved
>system 00:08: ioport range 0xeeac-0xeeac has been reserved
>system 00:08: ioport range 0xeeb0-0xeebf has been reserved
>system 00:08: ioport range 0xeec0-0xeeff has been reserved
>PCI: Bus 2, cardbus bridge: 0000:01:0b.0
>  IO window: 0000c000-0000c0ff
>  IO window: 0000c400-0000c4ff
>  PREFETCH window: 3c000000-3fffffff
>  MEM window: 40000000-43ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: c000-cfff
>  MEM window: cff00000-cfffffff
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PCI: Enabling device 0000:01:0b.0 (0000 -> 0003)
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3205k freed
>Simple Boot Flag at 0x7c set to 0x1
>apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1203719390.458:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 5CD9BF2212AB6B8E
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>PCI: Firmware left 0000:01:08.0 e100 interrupts enabled, disabling
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>vesafb: framebuffer at 0xd8000000, mapped to 0xef880000, using 3072k, total 16192k
>vesafb: mode is 1024x768x16, linelength=2048, pages=9
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>ACPI: Transitioning device [FAN] to D3
>ACPI: Transitioning device [FAN] to D3
>ACPI: Fan [FAN] (off)
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Thermal Zone [THRM] (71 C)
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>agpgart: Detected an Intel 855GM Chipset.
>agpgart: Detected 16252K stolen memory.
>agpgart: AGP aperture is 128M @ 0xd8000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>PCI: Enabling device 0000:00:1f.6 (0000 -> 0001)
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI interrupt for device 0000:00:1f.6 disabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>Yenta: CardBus bridge found at 0000:01:0b.0 [1179:0001]
>Yenta: ISA IRQ mask 0x04b8, PCI irq 11
>Socket status: 30000087
>pcmcia: parent PCI bridge I/O window: 0xc000 - 0xcfff
>cs: IO port probe 0xc000-0xcfff: clean.
>pcmcia: parent PCI bridge Memory window: 0xcff00000 - 0xcfffffff
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>cpuidle: using governor ladder
>input: PS/2 Mouse as /devices/virtual/input/input2
>input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input3
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 12:887:502
>Freeing unused kernel memory: 284k freed
>Write protecting the kernel read-only data: 894k
>Marking TSC unstable due to: TSC halts in idle.
>Time: acpi_pm clocksource has been installed.
>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 11, io mem 0x38080000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 10, io base 0x000018c0
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 11, io base 0x000018e0
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001c00
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 2-1: new low speed USB device using uhci_hcd and address 2
>SCSI subsystem initialized
>usb 2-1: configuration #1 chosen from 1 choice
>Driver 'sd' needs updating - please use bus_type methods
>input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input4
>input,hidraw0: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.0-1
>libata version 3.00 loaded.
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
>ata1.00: ATA-6: TOSHIBA MK6025GAS, KA200K, max UDMA/100
>ata1.00: 117210240 sectors, multi 16: LBA 
>ata1.00: configured for UDMA/100
>ata2.00: ATAPI: MATSHITADVD-RAM UJ-820S, 1.00, max UDMA/33
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK6025GA KA20 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-820S  1.00 PQ: 0 ANSI: 5
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1203719401.651:2): selinux=0 auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>input: Power Button (FF) as /devices/virtual/input/input5
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /devices/virtual/input/input6
>ACPI: Lid Switch [LID]
>input: Power Button (CM) as /devices/virtual/input/input7
>ACPI: Power Button (CM) [PWRB]
>ACPI: AC Adapter [ADP1] (on-line)
>ACPI: Battery Slot [BAT1] (battery present)
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input8
>ACPI: Video Device [VGA] (multi-head: yes  rom: yes  post: no)
>intel_rng: FWH not detected
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0xd860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>input: PC Speaker as /devices/platform/pcspkr/input/input9
>ieee80211_crypt: registered algorithm 'NULL'
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
>e100: Copyright(c) 1999-2006 Intel Corporation
>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
>e100: eth0: e100_probe: addr 0xcfffe000, irq 11, MAC addr 00:0e:7b:89:a3:27
>ieee80211: 802.11 data/management/control stack, git-1.1.13
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>PCI: Enabling device 0000:01:07.0 (0000 -> 0002)
>ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
>firewire_ohci: Added fw-ohci device 0000:01:07.0, OHCI version 1.10
>ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
>ipw2200: Copyright(c) 2003-2006 Intel Corporation
>ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11
>ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
>firewire_core: created device fw0: GUID 0000390000643a9b, S400
>ipw2200: Radio Frequency Kill Switch is On:
>Kill switch must be turned off for wireless networking to work.
>ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.6 to 64
>PCI: Enabling device 0000:00:1f.5 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>intel8x0_measure_ac97_clock: measured 50490 usecs
>intel8x0: clocking to 48000
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda8, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda7, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>fuse init (API version 7.9)
>Adding 787144k swap on /dev/sda6.  Priority:-1 extents:1 across:787144k
>warning: process `kudzu' used the deprecated sysctl system call with 1.23.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>Clocksource tsc unstable (delta = -65519700 ns)
>nf_conntrack version 0.5.0 (12288 buckets, 49152 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>audit(1203719433.999:3): audit_pid=1754 old=0 by auid=4294967295
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>[drm] Initialized drm 1.1.0 20060810
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>[drm] Initialized i915 1.11.0 20071122 on minor 0
>PCI: Enabling device 0000:00:02.1 (0000 -> 0002)
>PCI: Setting latency timer of device 0000:00:02.1 to 64
>[drm] Initialized i915 1.11.0 20071122 on minor 1

Actions: View

Attachments on bug 434308: 295642 | 295643