Attachment 295645 Details for Bug 389591 – dmesg output

dmesg output

dmesg.out (text/plain), 33.45 KB, created by Austin Acton on 2008-02-22 16:22:58 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Austin Acton

Created: 2008-02-22 16:22:58 UTC

Size: 33.45 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.24-2.fc9 (mockbuild@) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-36)) #1 SMP Fri Jan 25 13:14:54 EST 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
> BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003f640000 (usable)
> BIOS-e820: 000000003f640000 - 000000003f652000 (ACPI data)
> BIOS-e820: 000000003f652000 - 000000003f656000 (ACPI NVS)
> BIOS-e820: 000000003f656000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>118MB HIGHMEM available.
>896MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 259648) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   259648
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   259648
>On node 0 totalpages: 259648
>  DMA zone: 56 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4040 pages, LIFO batch:0
>  Normal zone: 3080 pages used for memmap
>  Normal zone: 222200 pages, LIFO batch:31
>  HighMem zone: 413 pages used for memmap
>  HighMem zone: 29859 pages, LIFO batch:7
>  Movable zone: 0 pages used for memmap
>DMI 2.4 present.
>Using APIC driver default
>ACPI: RSDP 000F6BE0, 0024 (r2 FUJ   )
>ACPI: XSDT 3F648E9E, 0074 (r1 FUJ    PC        1020000 FUJ       100)
>ACPI: FACP 3F650076, 00F4 (r3 FUJ    PC        1020000 FUJ       100)
>ACPI: DSDT 3F648F12, 7164 (r1 FUJ    FJNB1D8   1020000 FUJ       100)
>ACPI: FACS 3F655FC0, 0040
>ACPI: HPET 3F65016A, 0038 (r1 FUJ    FJNB1D8   1020000 FUJ       100)
>ACPI: MCFG 3F6501A2, 003C (r1 FUJ    FJNB1D8   1020000 FUJ       100)
>ACPI: SSDT 3F6501DE, 04EF (r1 FUJ    FJNB1D8   1020000 FUJ       100)
>ACPI: SSDT 3F6506CD, 01CA (r1 FUJ    FJNB1D8   1020000 FUJ       100)
>ACPI: SSDT 3F650897, 10A8 (r1 FUJ    FJNB1D8   1020000 FUJ       100)
>ACPI: SSDT 3F65193F, 0447 (r1 FUJ    FJNB1D8   1020000 FUJ       100)
>ACPI: APIC 3F651D86, 0068 (r1 FUJ    FJNB1D8   1020000 FUJ       100)
>ACPI: BOOT 3F651DEE, 0028 (r1 FUJ    FJNB1D8   1020000 FUJ       100)
>ACPI: SLIC 3F651E16, 0176 (r1 FUJ    PC        1020000 FUJ       100)
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:b8000000)
>swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
>swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 256099
>Kernel command line: ro root=LABEL=/1 rhgb quiet
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0826000 soft=c0806000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1064.041 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1024 kB
> per task-struct memory footprint: 1680 bytes
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1012528k/1038592k available (2313k kernel code, 25300k reserved, 1196k data, 576k init, 121088k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0773000 - 0xc0803000   ( 576 kB)
>      .data : 0xc064275d - 0xc076d924   (1196 kB)
>      .text : 0xc0400000 - 0xc064275d   (2313 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 2131.31 BogoMIPS (lpj=1065657)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>lockdep: not fixing up alternatives.
>ACPI: Core revision 20070126
>CPU0: Intel(R) Core(TM)2 Duo CPU     U7500  @ 1.06GHz stepping 0d
>lockdep: not fixing up alternatives.
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c0827000 soft=c0807000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 2128.01 BogoMIPS (lpj=1064009)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Duo CPU     U7500  @ 1.06GHz stepping 0d
>Total of 2 processors activated (4259.33 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=608 bytes
>sizeof(dentry)=160 bytes
>sizeof(ext3inode)=860 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=3552 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>khelper used greatest stack depth: 2928 bytes left
>khelper used greatest stack depth: 2876 bytes left
>net_namespace: 80 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 21:14:56  Date: 02/22/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using MMCONFIG
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI Error (tbinstal-0134): Table has invalid signature [    ], must be SSDT, PSDT or OEMx [20070126]
>ACPI Error (psparse-0537): Method parse/execution failed [\_SB_._INI] (Node f781d380), AE_BAD_SIGNATURE
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in poll mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 1180-11bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnpacpi: exceeded the max number of IO resources: 40 
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>ACPI: RTC can wake from S4
>Time: tsc clocksource has been installed.
>system 00:01: ioport range 0x378-0x37a has been reserved
>system 00:01: ioport range 0x4d0-0x4d1 has been reserved
>system 00:01: ioport range 0x680-0x69f has been reserved
>system 00:01: ioport range 0x800-0x80f has been reserved
>system 00:01: ioport range 0x1000-0x107f has been reserved
>system 00:01: ioport range 0x1080-0x10ff has been reserved
>system 00:01: ioport range 0x1100-0x111f has been reserved
>system 00:01: ioport range 0x1180-0x11bf has been reserved
>system 00:01: ioport range 0x1640-0x164f has been reserved
>system 00:01: ioport range 0xf800-0xf87f has been reserved
>system 00:01: ioport range 0xf880-0xf8ff has been reserved
>system 00:01: ioport range 0xfc00-0xfc7f has been reserved
>system 00:01: ioport range 0xfc80-0xfcff has been reserved
>system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
>system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
>system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
>system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved
>system 00:02: iomem range 0xf8000000-0xfbffffff could not be reserved
>system 00:02: iomem range 0xfed20000-0xfed3ffff could not be reserved
>system 00:02: iomem range 0x0-0x0 could not be reserved
>system 00:02: iomem range 0xfed45000-0xfed8ffff could not be reserved
>system 00:02: iomem range 0xfef00000-0xfeffffff has been reserved
>PCI: Bridge: 0000:00:1c.0
>  IO window: 2000-2fff
>  MEM window: fc200000-fc2fffff
>  PREFETCH window: 50000000-500fffff
>PCI: Bridge: 0000:00:1c.2
>  IO window: disabled.
>  MEM window: fc300000-fc3fffff
>  PREFETCH window: disabled.
>PCI: Bus 29, cardbus bridge: 0000:1c:03.0
>  IO window: 00001400-000014ff
>  IO window: 00001c00-00001cff
>  PREFETCH window: 54000000-57ffffff
>  MEM window: 58000000-5bffffff
>PCI: Bus 33, cardbus bridge: 0000:1c:03.1
>  IO window: 00003000-000030ff
>  IO window: 00003400-000034ff
>  PREFETCH window: 5c000000-5fffffff
>  MEM window: 60000000-63ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: fc400000-fc4fffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:1c:03.0[A] -> GSI 17 (level, low) -> IRQ 18
>PCI: Enabling device 0000:1c:03.1 (0080 -> 0083)
>ACPI: PCI Interrupt 0000:1c:03.1[A] -> GSI 17 (level, low) -> IRQ 18
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
> it is
>Freeing initrd memory: 2557k freed
>khelper used greatest stack depth: 2748 bytes left
>Simple Boot Flag at 0x7b set to 0x1
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1203714895.852:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>khelper used greatest stack depth: 2728 bytes left
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>Allocate Port Service[0000:00:1c.2:pcie03]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: SSDT 3F652E2F, 01F6 (r1 FUJ    FJNB1D8   1020000 FUJ       100)
>ACPI: SSDT 3F65332F, 046E (r1 FUJ    FJNB1D8   1020000 FUJ       100)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: SSDT 3F653277, 00B8 (r1 FUJ    FJNB1D8   1020000 FUJ       100)
>ACPI: SSDT 3F65379D, 0047 (r1 FUJ    FJNB1D8   1020000 FUJ       100)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Thermal Zone [TZ00] (27 C)
>ACPI: Thermal Zone [TZ01] (27 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>agpgart: Detected an Intel 965GM Chipset.
>agpgart: Detected 7676K stolen memory.
>agpgart: AGP aperture is 256M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>00:05: ttyS0 at I/O 0x220 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>Yenta: CardBus bridge found at 0000:1c:03.0 [10cf:143d]
>Yenta O2: res at 0x94/0xD4: 00/ea
>Yenta O2: enabling read prefetch/write burst
>Yenta: ISA IRQ mask 0x0cb8, PCI irq 18
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#1c) from #1d to #20
>pcmcia: parent PCI bridge Memory window: 0xfc400000 - 0xfc4fffff
>Yenta: CardBus bridge found at 0000:1c:03.1 [10cf:143d]
>Yenta: ISA IRQ mask 0x0cb8, PCI irq 18
>Socket status: 30000410
>Yenta: Raising subordinate bus# of parent bus (#1c) from #20 to #24
>pcmcia: parent PCI bridge Memory window: 0xfc400000 - 0xfc4fffff
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>cpuidle: using governor ladder
>pccard: PCMCIA card inserted into slot 1
>input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/input/input2
>cpuidle: using governor menu
>Marking TSC unstable due to: TSC halts in idle.
>Time: hpet clocksource has been installed.
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 12:25:248
>Freeing unused kernel memory: 576k freed
>Write protecting the kernel read-only data: 925k
>ACPI: PCI Interrupt 0000:00:1a.7[B] -> GSI 23 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfc704800
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:00:1d.7[B] -> GSI 23 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfc704c00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>modprobe used greatest stack depth: 1972 bytes left
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 22 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1a.1[A] -> GSI 22 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001840
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 22 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001860
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[A] -> GSI 22 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001880
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[A] -> GSI 22 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.2: irq 20, io base 0x000018a0
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>usb 3-2: new full speed USB device using uhci_hcd and address 2
>modprobe used greatest stack depth: 1864 bytes left
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ahci 0000:00:1f.2: version 3.0
>ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 20 (level, low) -> IRQ 21
>usb 3-2: configuration #1 chosen from 1 choice
>usb 7-1: new full speed USB device using uhci_hcd and address 2
>usb 7-1: configuration #1 chosen from 1 choice
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part 
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xfc704000 port 0xfc704100 irq 221
>ata2: SATA max UDMA/133 abar m2048@0xfc704000 port 0xfc704180 irq 221
>ata3: SATA max UDMA/133 abar m2048@0xfc704000 port 0xfc704200 irq 221
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-8: FUJITSU MHW2060BH, 00000012, max UDMA/100
>ata1.00: 117210240 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/100
>ata2: SATA link down (SStatus 0 SControl 300)
>ata3: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHW2060B 0000 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4
>sd 0:0:0:0: [sda] Attached SCSI disk
>modprobe used greatest stack depth: 632 bytes left
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:8192 avtab hash slots allocated.Num of rules:151356
>SELinux:8192 avtab hash slots allocated.Num of rules:151356
>security:  8 users, 12 roles, 2222 types, 107 bools, 1 sens, 1024 cats
>security:  69 classes, 151356 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>audit(1203714906.203:2): policy loaded auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: HCI USB driver ver 2.9
>usbcore: registered new interface driver hci_usb
>input: Power Button (FF) as /devices/virtual/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /devices/virtual/input/input4
>ACPI: Lid Switch [LID]
>input: Power Button (CM) as /devices/virtual/input/input5
>ACPI: Power Button (CM) [PWRB]
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: Battery Slot [CMB1] (battery present)
>ACPI: Battery Slot [CMB2] (battery absent)
>ACPI: AC Adapter [AC] (on-line)
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
>ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>sky2 0000:04:00.0: v1.20 addr 0xfc200000 irq 16 Yukon-EC Ultra (0xb4) rev 3
>sky2 eth0: addr 00:17:42:6a:de:c9
>iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.23kds
>iwl4965: Copyright(c) 2003-2007 Intel Corporation
>ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 18 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:0c:00.0 to 64
>iwl4965: Detected Intel Wireless WiFi Link 4965AGN
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>phy0: Selected rate control algorithm 'iwl-4965-rs'
>ALSA sound/pci/hda/hda_intel.c:727: codec_mask = 0x3
>hda_codec: Unknown model for ALC262, trying auto-probe from BIOS...
>ALSA sound/pci/hda/hda_codec.c:2760: autoconfig: line_outs=1 (0x15/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2764:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2768:    hp_outs=2 (0x14/0x1b/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2776:    inputs: mic=0x12, fmic=0x18, line=0x0, fline=0x0, cd=0x0, aux=0x0
>ACPI: PCI interrupt for device 0000:0c:00.0 disabled
>ALSA sound/pci/hda/patch_si3054.c:238: si3054: cannot initialize. EXT MID = 0000
>ALSA sound/pci/hda/patch_si3054.c:250: Link Frame Detect(FDT) is not ready (line status: 0000)
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 21 (level, low) -> IRQ 22
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>cs: memory probe 0xfc400000-0xfc4fffff: excluding 0xfc400000-0xfc40ffff
>pcmcia: registering new device pcmcia1.0
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci: SDHCI controller found at 0000:1c:03.2 [1217:7120] (rev 2)
>ACPI: PCI Interrupt 0000:1c:03.2[A] -> GSI 17 (level, low) -> IRQ 18
>sdhci:slot0: Unknown controller version (2). You may experience problems.
>mmc0: SDHCI at 0xfc402800 irq 18 PIO
>input: PC Speaker as /devices/platform/pcspkr/input/input7
>ACPI: PCI Interrupt 0000:1c:03.4[A] -> GSI 17 (level, low) -> IRQ 18
>firewire_ohci: Added fw-ohci device 0000:1c:03.4, OHCI version 1.10
>tpm_inf_pnp 00:03: Found TPM with ID IFX0102
>tpm_inf_pnp 00:03: TPM found: config base 0x4e, data base 0xfd00, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
>SELinux: initialized (dev securityfs, type securityfs), not configured for labeling
>audit(1203714911.379:3): avc:  denied  { mount } for  pid=1081 comm="modprobe" name="/" dev=securityfs ino=1 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:object_r:unlabeled_t:s0 tclass=filesystem
>audit(1203714911.379:4): avc:  denied  { search } for  pid=1081 comm="modprobe" name="/" dev=securityfs ino=1 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:object_r:unlabeled_t:s0 tclass=dir
>rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k
>firewire_core: created new fw device fw0 (0 config rom retries, S400)
>hda_codec: num_steps = 0 for NID=0x12
>hda_codec: num_steps = 0 for NID=0x12
>hda_codec: num_steps = 0 for NID=0x12
>hda_codec: num_steps = 0 for NID=0x12
>hda_codec: num_steps = 0 for NID=0x12
>hda_codec: num_steps = 0 for NID=0x12
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Clocksource tsc unstable (delta = -179125016 ns)
>[drm] Initialized drm 1.1.0 20060810
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>[drm] Initialized i915 1.11.0 20071122 on minor 0
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda1, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda4, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 1951888k swap on /dev/sda3.  Priority:-1 extents:1 across:1951888k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>warning: process `kudzu' used the deprecated sysctl system call with 1.23.
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>Loading iSCSI transport class v2.0-724.
>iscsi: registered transport (tcp)
>iscsi: registered transport (iser)
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>audit(1203714934.560:5): audit_pid=2020 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>sky2 eth0: enabling interface
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 18 (level, low) -> IRQ 17
>iwl4965: Tunable channels: 11 802.11bg, 13 802.11a channels
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>hda_codec: num_steps = 0 for NID=0x12
>ALSA sound/pci/hda/hda_intel.c:1254: azx_pcm_prepare: bufsize=0x4400, fragsize=0x1100, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:682: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1254: azx_pcm_prepare: bufsize=0x4400, fragsize=0x1100, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:682: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
>hda_codec: num_steps = 0 for NID=0x12
>ALSA sound/pci/hda/hda_intel.c:1254: azx_pcm_prepare: bufsize=0x4400, fragsize=0x1100, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:682: hda_codec_setup_stream: NID=0x7, stream=0x1, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1254: azx_pcm_prepare: bufsize=0x4400, fragsize=0x1100, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:682: hda_codec_setup_stream: NID=0x7, stream=0x1, channel=0, format=0x4011
>hda_codec: num_steps = 0 for NID=0x12
>ALSA sound/pci/hda/hda_codec.c:682: hda_codec_setup_stream: NID=0x2, stream=0x0, channel=0, format=0x0
>ALSA sound/pci/hda/hda_codec.c:682: hda_codec_setup_stream: NID=0x2, stream=0x0, channel=0, format=0x0
>ALSA sound/pci/hda/hda_codec.c:682: hda_codec_setup_stream: NID=0x7, stream=0x0, channel=0, format=0x0
>ALSA sound/pci/hda/hda_codec.c:682: hda_codec_setup_stream: NID=0x7, stream=0x0, channel=0, format=0x0
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda2, type ext3), uses xattr
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:14:d1:c2:70:f0
>wlan0: RX authentication from 00:14:d1:c2:70:f0 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:14:d1:c2:70:f0
>wlan0: RX AssocResp from 00:14:d1:c2:70:f0 (capab=0x431 status=0 aid=5)
>wlan0: associated
>wlan0 (WE) : Wireless Event too big (320)
>wlan0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 burst=0
>wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
>wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
>wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>WARNING: at net/mac80211/rx.c:1704 __ieee80211_rx_handle_packet() (Not tainted)
>Pid: 0, comm: swapper Not tainted 2.6.24-2.fc9 #1
> [<c04064b6>] show_trace_log_lvl+0x1a/0x2f
> [<c0406ce2>] show_trace+0x12/0x14
> [<c0407002>] dump_stack+0x6c/0x72
> [<c0401035>] _stext+0x35/0x3d
> [<f8ae7292>] __ieee80211_rx_handle_packet+0x8b/0x82b [mac80211]
> [<f8ae8773>] __ieee80211_rx+0x4b0/0x519 [mac80211]
> [<f8adaca0>] ieee80211_tasklet_handler+0x41/0xc0 [mac80211]
> [<c043463f>] tasklet_action+0x68/0xd3
> [<c043451d>] __do_softirq+0x78/0xff
> [<c040779e>] do_softirq+0x71/0xd3
> =======================
>padlock: VIA PadLock not detected.
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>input: Bluetooth Laser Travel Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/hci0/acl00076197490D/input/input8
>wlan0: no IPv6 routers present

Actions: View

Attachments on bug 389591: 263041 | 295645 | 295646