Attachment 295713 Details for Bug 426518 – content of dmesg

content of dmesg

dmesg.txt (text/plain), 30.45 KB, created by Mehdi Bahri on 2008-02-23 19:15:19 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Mehdi Bahri

Created: 2008-02-23 19:15:19 UTC

Size: 30.45 KB

patch

obsolete

>Linux version 2.6.23.15-137.fc8 (mockbuild@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Sun Feb 10 17:48:34 EST 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ffc0000 (usable)
> BIOS-e820: 000000007ffc0000 - 000000007ffce000 (ACPI data)
> BIOS-e820: 000000007ffce000 - 0000000080000000 (ACPI NVS)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
>1151MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000ff780
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 524224) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   524224
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   524224
>On node 0 totalpages: 524224
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 2303 pages used for memmap
>  HighMem zone: 292545 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI 2.4 present.
>Using APIC driver default
>ACPI: RSDP 000F7AC0, 0014 (r0 ACPIAM)
>ACPI: RSDT 7FFC0000, 003C (r1 AMI    OEMRSDT   9000627 MSFT       97)
>ACPI: FACP 7FFC0200, 0084 (r2 AMI    OEMFACP   9000627 MSFT       97)
>ACPI: DSDT 7FFC05E0, 83DE (r1  F3J00 F3J00001        1 INTL  2002026)
>ACPI: FACS 7FFCE000, 0040
>ACPI: APIC 7FFC0390, 005C (r1 AMI    OEMAPIC   9000627 MSFT       97)
>ACPI: MCFG 7FFC03F0, 003C (r1 AMI    OEMMCFG   9000627 MSFT       97)
>ACPI: BOOT 7FFC05B0, 0028 (r1 AMI    OEMBOOT   9000627 MSFT       97)
>ACPI: SLIC 7FFC0430, 0176 (r1 AMI    OEMSLIC   9000627 MSFT       97)
>ACPI: OEMB 7FFCE040, 0046 (r1 AMI    AMI_OEM   9000627 MSFT       97)
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
>swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
>Built 1 zonelists in Zone order.  Total pages: 520129
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07a9000 soft=c0789000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1995.054 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2070368k/2096896k available (2187k kernel code, 25360k reserved, 1118k data, 280k init, 1179392k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0740000 - 0xc0786000   ( 280 kB)
>      .data : 0xc0622d15 - 0xc073a544   (1118 kB)
>      .text : 0xc0400000 - 0xc0622d15   (2187 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>Calibrating delay using timer specific routine.. 3993.79 BogoMIPS (lpj=1996896)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>CPU0: Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07aa000 soft=c078a000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3989.50 BogoMIPS (lpj=1994752)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
>Total of 2 processors activated (7983.29 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=1552 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 20:03:35  Date: 02/23/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>APIC error on CPU1: 00(40)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>Force enabled HPET at base address 0xfed00000
>PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0480-04bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 12)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 12)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 12)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 12)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet clockevent registered
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Time: tsc clocksource has been installed.
>pnp: 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
>pnp: 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
>pnp: 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
>pnp: 00:08: iomem range 0xfed45000-0xfed89fff has been reserved
>pnp: 00:08: iomem range 0xfed45000-0xfed89fff has been reserved
>pnp: 00:09: ioport range 0x250-0x253 has been reserved
>pnp: 00:09: ioport range 0x256-0x25f has been reserved
>pnp: 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
>pnp: 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved
>pnp: 00:09: iomem range 0xfec10000-0xfec17fff has been reserved
>pnp: 00:09: iomem range 0xfec18000-0xfec1ffff has been reserved
>pnp: 00:0a: iomem range 0xe0000000-0xe3ffffff has been reserved
>pnp: 00:0b: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:0b: iomem range 0xc0000-0xcffff could not be reserved
>pnp: 00:0b: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:0b: iomem range 0x100000-0x7fffffff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: b000-bfff
>  MEM window: f9f00000-fdffffff
>  PREFETCH window: bdf00000-ddefffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: c000-cfff
>  MEM window: fe000000-fe0fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: fe100000-fe1fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.2
>  IO window: d000-dfff
>  MEM window: fe200000-fe9fffff
>  PREFETCH window: ddf00000-dfefffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: fea00000-feafffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>Freeing initrd memory: 3629k freed
>Simple Boot Flag at 0x52 set to 0x1
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1203797014.850:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 433CDEB37FB53040
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: SSDT 7FFC89C0, 0D07 (r1    AMI   CPU1PM        1 INTL  2002026)
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI Warning (tbutils-0217): Incorrect checksum in table [SSDT] -  57, should be 18 [20070126]
>ACPI: SSDT 7FFC96D0, 0D07 (r1    AMI   CPU2PM        1 INTL  2002026)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
>ACPI: Processor [CPU2] (supports 8 throttling states)
>ACPI: Thermal Zone [THRM] (54 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Marking TSC unstable due to: TSC halts in idle.
>Using IPI No-Shortcut mode
>Time: hpet clocksource has been installed.
>  Magic number: 12:338:94
>Freeing unused kernel memory: 280k freed
>Write protecting the kernel read-only data: 850k
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfebfbc00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000ec00
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000e880
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e480
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>usb 1-8: new high speed USB device using ehci_hcd and address 3
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ata_piix 0000:00:1f.2: version 2.12
>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
>usb 1-8: configuration #1 chosen from 1 choice
>ata1.00: ATA-7: Hitachi HTS541612J9SA00, SBDOC70P, max UDMA/100
>ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/100
>usb 4-1: new full speed USB device using uhci_hcd and address 2
>usb 4-1: configuration #1 chosen from 1 choice
>ata2.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.21, max UDMA/33
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54161 SBDO PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-850S  1.21 PQ: 0 ANSI: 5
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1203797020.486:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  8 users, 12 roles, 2347 types, 114 bools, 1 sens, 1024 cats
>security:  67 classes, 215522 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1203797021.063:3): policy loaded auid=4294967295
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>input: PC Speaker as /class/input/input3
>r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>eth0: RTL8168b/8111b at 0xf8858000, 00:18:f3:a0:6b:fb, XID 38000000 IRQ 16
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 20
>iTCO_vendor_support: vendor-support=0
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /class/input/input5
>ACPI: Lid Switch [LID]
>input: Power Button (CM) as /class/input/input6
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /class/input/input7
>ACPI: Sleep Button (CM) [SLPB]
>asus-laptop: Asus Laptop Support version 0.42
>asus-laptop:   F3JV model detected
>Registered led device: asus:touchpad
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>Bluetooth: HCI USB driver ver 2.9
>usbcore: registered new interface driver hci_usb
>ACPI: AC Adapter [AC0] (off-line)
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.23kds
>iwl3945: Copyright(c) 2003-2007 Intel Corporation
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>phy0: Selected rate control algorithm 'iwl-3945-rs'
>ACPI: Battery Slot [BAT0] (battery present)
>intel_rng: FWH not detected
>input: Video Bus as /class/input/input8
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>ACPI: PCI interrupt for device 0000:03:00.0 disabled
>sdhci: SDHCI controller found at 0000:06:01.1 [1180:0822] (rev 19)
>ACPI: PCI Interrupt 0000:06:01.1[B] -> GSI 17 (level, low) -> IRQ 17
>mmc0: SDHCI at 0xfeaff400 irq 17 DMA
>ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>firewire_ohci: Added fw-ohci device 0000:06:01.0, OHCI version 1.0
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>NVRM: loading NVIDIA UNIX x86 Kernel Module  169.09  Fri Jan 11 14:38:28 PST 2008
>firewire_core: created device fw0: GUID 00e018000372cd37, S400
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>Clocksource tsc unstable (delta = -63187105 ns)
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>audit(1203793439.340:4): avc:  denied  { sys_admin } for  pid=1439 comm="loadkeys" capability=21 scontext=system_u:system_r:loadkeys_t:s0 tcontext=system_u:system_r:loadkeys_t:s0 tclass=capability
>audit(1203793439.340:5): avc:  denied  { sys_admin } for  pid=1439 comm="loadkeys" capability=21 scontext=system_u:system_r:loadkeys_t:s0 tcontext=system_u:system_r:loadkeys_t:s0 tclass=capability
>audit(1203793439.340:6): avc:  denied  { sys_admin } for  pid=1439 comm="loadkeys" capability=21 scontext=system_u:system_r:loadkeys_t:s0 tcontext=system_u:system_r:loadkeys_t:s0 tclass=capability
>audit(1203793439.340:7): avc:  denied  { sys_admin } for  pid=1439 comm="loadkeys" capability=21 scontext=system_u:system_r:loadkeys_t:s0 tcontext=system_u:system_r:loadkeys_t:s0 tclass=capability
>audit(1203793439.340:8): avc:  denied  { sys_admin } for  pid=1439 comm="loadkeys" capability=21 scontext=system_u:system_r:loadkeys_t:s0 tcontext=system_u:system_r:loadkeys_t:s0 tclass=capability
>audit(1203793439.340:9): avc:  denied  { sys_admin } for  pid=1439 comm="loadkeys" capability=21 scontext=system_u:system_r:loadkeys_t:s0 tcontext=system_u:system_r:loadkeys_t:s0 tclass=capability
>audit(1203793439.340:10): avc:  denied  { sys_admin } for  pid=1439 comm="loadkeys" capability=21 scontext=system_u:system_r:loadkeys_t:s0 tcontext=system_u:system_r:loadkeys_t:s0 tclass=capability
>audit(1203793439.340:11): avc:  denied  { sys_admin } for  pid=1439 comm="loadkeys" capability=21 scontext=system_u:system_r:loadkeys_t:s0 tcontext=system_u:system_r:loadkeys_t:s0 tclass=capability
>audit(1203793439.341:12): avc:  denied  { sys_admin } for  pid=1439 comm="loadkeys" capability=21 scontext=system_u:system_r:loadkeys_t:s0 tcontext=system_u:system_r:loadkeys_t:s0 tclass=capability
>device-mapper: multipath: version 1.0.5 loaded
>loop: module loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda2, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:2031608k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (0FFFFFFFC) is beyond end of object [20070126]
>ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PSS] (Node f7c201f8), AE_AML_PACKAGE_LIMIT
>ACPI Exception (processor_perflib-0234): AE_AML_PACKAGE_LIMIT, Evaluating _PSS [20070126]
>ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (0FFFFFFFC) is beyond end of object [20070126]
>ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._PSS] (Node f7c45720), AE_AML_PACKAGE_LIMIT
>ACPI Exception (processor_perflib-0234): AE_AML_PACKAGE_LIMIT, Evaluating _PSS [20070126]
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>audit(1203793450.822:13): audit_pid=2068 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>r8169: eth0: link down
>r8169: eth0: link down
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>fuse init (API version 7.8)
>SELinux: initialized (dev sda1, type fuseblk), uses genfs_contexts
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:08:a1:a5:b5:29
>wlan0: RX authentication from 00:08:a1:a5:b5:29 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:08:a1:a5:b5:29
>wlan0: RX AssocResp from 00:08:a1:a5:b5:29 (capab=0x461 status=0 aid=2)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: disassociate(reason=3)
>wlan0: RX disassociation from 00:08:a1:a5:b5:29 (reason=7)
>wlan0: RX disassociation from 00:08:a1:a5:b5:29 (reason=7)
>wlan0: RX disassociation from 00:08:a1:a5:b5:29 (reason=7)
>wlan0: RX disassociation from 00:08:a1:a5:b5:29 (reason=7)
>wlan0: RX disassociation from 00:08:a1:a5:b5:29 (reason=7)
>wlan0: RX disassociation from 00:08:a1:a5:b5:29 (reason=7)
>wlan0: RX disassociation from 00:08:a1:a5:b5:29 (reason=7)
>wlan0: RX disassociation from 00:08:a1:a5:b5:29 (reason=7)
>wlan0: RX disassociation from 00:08:a1:a5:b5:29 (reason=7)
>wlan0: RX disassociation from 00:08:a1:a5:b5:29 (reason=7)
>wlan0: RX disassociation from 00:08:a1:a5:b5:29 (reason=7)
>wlan0: RX disassociation from 00:08:a1:a5:b5:29 (reason=7)
>wlan0: RX disassociation from 00:08:a1:a5:b5:29 (reason=7)
>wlan0: RX disassociation from 00:08:a1:a5:b5:29 (reason=7)
>wlan0: associate with AP 00:08:a1:a5:b5:29
>wlan0: RX ReassocResp from 00:08:a1:a5:b5:29 (capab=0x461 status=0 aid=2)
>wlan0: associated
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: no IPv6 routers present
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:08:a1:a5:b5:29
>wlan0: disassociate(reason=3)
>wlan0: disassociate(reason=3)
>wlan0: RX authentication from 00:08:a1:a5:b5:29 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:08:a1:a5:b5:29
>wlan0: RX AssocResp from 00:08:a1:a5:b5:29 (capab=0x461 status=0 aid=2)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: no IPv6 routers present
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>printk: 7 messages suppressed.
>wlan0: RX non-WEP frame, but expected encryption
>printk: 3 messages suppressed.
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>printk: 1 messages suppressed.
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>printk: 9 messages suppressed.
>wlan0: RX non-WEP frame, but expected encryption

Actions: View

Attachments on bug 426518: 295713 | 295714 | 295715 | 295717