Attachment 295755 Details for Bug 433557 – dmesg output with test kernel

dmesg output with test kernel

080224_2225CET.2.6.24.2-7.fc8.dmesg (text/plain), 25.07 KB, created by Wojciech Pilorz on 2008-02-25 01:13:47 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Wojciech Pilorz

Created: 2008-02-25 01:13:47 UTC

Size: 25.07 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.24.2-7.fc8 (mockbuild@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Tue Feb 19 10:21:24 EST 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
> BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS)
> BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>767MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 196592) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   196592
>  HighMem    196592 ->   196592
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   196592
>On node 0 totalpages: 196592
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1503 pages used for memmap
>  Normal zone: 190993 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>DMI 2.2 present.
>Using APIC driver default
>ACPI: RSDP 000F70A0, 0014 (r0 IntelR)
>ACPI: RSDT 2FFF3000, 002C (r1 IntelR AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP 2FFF3040, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT 2FFF30C0, 2311 (r1 INTELR AWRDACPI     1000 MSFT  100000C)
>ACPI: FACS 2FFF0000, 0040
>ACPI: BOOT 2FFF5400, 0028 (r1 IntelR                 0             0)
>ACPI: PM-Timer IO Port: 0x4008
>Allocating PCI resources starting at 40000000 (gap: 30000000:cfff0000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 195057
>Kernel command line: ro root=/dev/fc/fc8root idebus=30 rhgb quiet
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffb000 (0160e000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07ba000 soft=c079a000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 730.249 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 770596k/786368k available (2238k kernel code, 15104k reserved, 1131k data, 284k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf0800000 - 0xff7fe000   ( 239 MB)
>    lowmem  : 0xc0000000 - 0xefff0000   ( 767 MB)
>      .init : 0xc0750000 - 0xc0797000   ( 284 kB)
>      .data : 0xc062f8e9 - 0xc074a724   (1131 kB)
>      .text : 0xc0400000 - 0xc062f8e9   (2238 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 1461.34 BogoMIPS (lpj=730673)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: After generic identify, caps: 0387f9ff 00000000 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 256K
>CPU serial number disabled.
>CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040 00000000 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>ACPI: setting ELCR to 0200 (from 0ca0)
>CPU0: Intel Pentium III (Coppermine) stepping 06
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1680 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000001
>  groups: 00000001
>net_namespace: 64 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 21:16:39  Date: 02/24/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfb520, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
>* this clock source is slow. Consider trying other clock sources
>PCI quirk: region 4000-403f claimed by PIIX4 ACPI
>PCI quirk: region 5000-500f claimed by PIIX4 SMB
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>Time: tsc clocksource has been installed.
>system 00:00: iomem range 0xf0000-0xf3fff could not be reserved
>system 00:00: iomem range 0xf4000-0xf7fff could not be reserved
>system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
>system 00:00: iomem range 0xfc000-0xfffff could not be reserved
>system 00:00: iomem range 0x2fff0000-0x2fffffff could not be reserved
>system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved
>system 00:00: iomem range 0x0-0x9ffff could not be reserved
>system 00:00: iomem range 0x100000-0x2ffeffff could not be reserved
>system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
>system 00:02: ioport range 0x4d0-0x4d1 has been reserved
>system 00:02: ioport range 0x294-0x297 has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: d4000000-d5ffffff
>  PREFETCH window: d6000000-d7ffffff
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Switched to high resolution mode on CPU 0
>Freeing initrd memory: 3600k freed
>Simple Boot Flag at 0x34 set to 0x1
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1203887799.232:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key CB1B5A62F6329C
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Limiting direct PCI/PCI transfers.
>PCI: Firmware left 0000:00:0b.0 e100 interrupts enabled, disabling
>Boot video device is 0000:01:00.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Fan [FAN] (on)
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Processor [CPU0] (supports 2 throttling states)
>ACPI: Thermal Zone [THRM] (37 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>agpgart: Detected an Intel 440BX Chipset.
>agpgart: AGP aperture is 64M @ 0xd0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>cpuidle: using governor ladder
>input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input2
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 12:725:298
>Freeing unused kernel memory: 284k freed
>Write protecting the kernel read-only data: 894k
>Marking TSC unstable due to: TSC halts in idle.
>Time: acpi_pm clocksource has been installed.
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 7
>PCI: setting IRQ 7 as level-triggered
>ACPI: PCI Interrupt 0000:00:0d.2[C] -> Link [LNKA] -> GSI 7 (level, low) -> IRQ 7
>ehci_hcd 0000:00:0d.2: EHCI Host Controller
>ehci_hcd 0000:00:0d.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:0d.2: irq 7, io mem 0xd9104000
>ehci_hcd 0000:00:0d.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 5 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>ohci_hcd 0000:00:0d.0: OHCI Host Controller
>ohci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:0d.0: irq 11, io mem 0xd9102000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:0d.1[B] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
>ohci_hcd 0000:00:0d.1: OHCI Host Controller
>ohci_hcd 0000:00:0d.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:0d.1: irq 10, io mem 0xd9103000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
>uhci_hcd 0000:00:07.2: UHCI Host Controller
>uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:07.2: irq 10, io base 0x0000c000
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>SCSI subsystem initialized
>usb 4-1: new full speed USB device using uhci_hcd and address 2
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>pata_hpt37x: BIOS has not set timing clocks.
>pata_hpt37x: HPT370A using 33MHz bus clock.
>ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>scsi0 : pata_hpt37x
>scsi1 : pata_hpt37x
>ata1: PATA max UDMA/100 cmd 0xd400 ctl 0xd800 bmdma 0xe400 irq 11
>ata2: PATA max UDMA/100 cmd 0xdc00 ctl 0xe000 bmdma 0xe408 irq 11
>usb 4-1: configuration #1 chosen from 1 choice
>ata1.00: ATA-6: ST380011A, 3.06, max UDMA/100
>ata1.00: 156301488 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>ata2.00: ATA-5: IBM-DTLA-307030, TX4OA50C, max UDMA/100
>ata2.00: 60036480 sectors, multi 16: LBA 
>pata_hpt37x: UDMA100 is not supported for IBM-DTLA-307030.
>ata2.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      ST380011A        3.06 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: Direct-Access     ATA      IBM-DTLA-307030  TX4O PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdb] 60036480 512-byte hardware sectors (30739 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sdb] 60036480 512-byte hardware sectors (30739 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 >
>sd 1:0:0:0: [sdb] Attached SCSI disk
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
>ata_piix 0000:00:07.1: version 2.12
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
>ata4: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
>ata3.00: ATAPI: HL-DT-ST DVDRAM GSA-4163B, A106, max UDMA/33
>ata3.00: configured for UDMA/33
>ata4.00: ATAPI: CD-W524E, 1.0E, max UDMA/33
>ata4.01: ATAPI: TEAC    PD-1 PD-518E, 1.0E, max MWDMA1
>ata4.00: configured for UDMA/33
>ata4.01: configured for MWDMA1
>scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4163B A106 PQ: 0 ANSI: 5
>scsi 3:0:0:0: CD-ROM            TEAC     CD-W524E         1.0E PQ: 0 ANSI: 5
>scsi 3:0:1:0: CD-ROM            TEAC     PD-1 PD-518E     1.0E PQ: 0 ANSI: 5
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1203887828.289:2): enforcing=1 old_enforcing=0 auid=4294967295
>SELinux:8192 avtab hash slots allocated.Num of rules:207820
>SELinux:8192 avtab hash slots allocated.Num of rules:207820
>security:  8 users, 11 roles, 2317 types, 112 bools, 1 sens, 1024 cats
>security:  67 classes, 207820 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-4, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>audit(1203887829.047:3): policy loaded auid=4294967295
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.00: cmd c8/00:00:8c:26:69/00:00:00:00:00/e7 tag 0 dma 131072 in
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata1.00: status: { DRDY }
>ata1: soft resetting link
>ata1.00: configured for UDMA/100
>ata1: EH complete
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.00: cmd c8/00:00:8c:26:69/00:00:00:00:00/e7 tag 0 dma 131072 in
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata1.00: status: { DRDY }
>ata1: soft resetting link
>ata1.00: configured for UDMA/100
>ata1: EH complete
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.00: cmd c8/00:00:8c:26:69/00:00:00:00:00/e7 tag 0 dma 131072 in
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata1.00: status: { DRDY }
>ata1: soft resetting link
>ata1.00: configured for UDMA/100
>ata1: EH complete
>ata1.00: limiting speed to UDMA/66:PIO4
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.00: cmd c8/00:00:8c:26:69/00:00:00:00:00/e7 tag 0 dma 131072 in
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata1.00: status: { DRDY }
>ata1: soft resetting link
>ata1.00: configured for UDMA/66
>ata1: EH complete
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.00: cmd c8/00:00:8c:26:69/00:00:00:00:00/e7 tag 0 dma 131072 in
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata1.00: status: { DRDY }
>ata1: soft resetting link
>ata1.00: configured for UDMA/66
>ata1: EH complete
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.00: cmd c8/00:00:8c:26:69/00:00:00:00:00/e7 tag 0 dma 131072 in
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata1.00: status: { DRDY }
>ata1: soft resetting link
>ata1.00: configured for UDMA/66
>sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
>sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
>Descriptor sense data with sense descriptors (in hex):
>        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
>        00 00 00 00 
>sd 0:0:0:0: [sda] Add. Sense: No additional sense information
>end_request: I/O error, dev sda, sector 124331660
>ata1: EH complete
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>scsi 2:0:0:0: Attached scsi generic sg2 type 5
>scsi 3:0:0:0: Attached scsi generic sg3 type 5
>scsi 3:0:1:0: Attached scsi generic sg4 type 5
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 2:0:0:0: Attached scsi CD-ROM sr0
>sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
>sr 3:0:0:0: Attached scsi CD-ROM sr1
>sr2: scsi3-mmc drive: 8x/8x xa/form2 cdda tray
>sr 3:0:1:0: Attached scsi CD-ROM sr2
>piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
>8139too Fast Ethernet driver 0.9.28
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
>eth0: RealTek RTL8139 at 0xf08be000, 00:02:44:40:96:59, IRQ 5
>eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
>usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1204
>usbcore: registered new interface driver usblp
>e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
>e100: Copyright(c) 1999-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
>input: Power Button (FF) as /devices/virtual/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/virtual/input/input4
>ACPI: Power Button (CM) [PWRB]
>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>e100: eth1: e100_probe: addr 0xd9101000, irq 10, MAC addr 00:0e:0c:5e:80:77
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>gameport: EMU10K1 is pci0000:00:0f.1/gameport0, io 0xd000, speed 1217kHz
>input: PC Speaker as /devices/platform/pcspkr/input/input5
>udev: renamed network interface eth1 to eth0
>udev: renamed network interface eth0_rename to eth1
>ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
>ALSA sound/pci/emu10k1/emu10k1_main.c:1671: vendor=0x1102, device=0x2, subsystem_vendor_id=0x80401102, subsystem_id=0x8040
>ALSA sound/pci/emu10k1/emu10k1_main.c:1696: Sound card name=SBLive! Platinum [CT4760P]
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-4, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-5, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-7, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-7, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-9, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-9, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-6, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-11, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-11, type ext3), uses xattr
>SELinux: initialized (dev sdb9, type ext2), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-10, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-10, type ext3), uses xattr
>SELinux: initialized (dev sda8, type ext2), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.00: cmd c8/00:a0:04:51:02/00:00:00:00:00/e8 tag 0 dma 81920 in
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata1.00: status: { DRDY }
>ata1: soft resetting link
>ata1.00: configured for UDMA/66
>ata1: EH complete
>ata1.00: limiting speed to UDMA/33:PIO4
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.00: cmd c8/00:a0:04:51:02/00:00:00:00:00/e8 tag 0 dma 81920 in
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata1.00: status: { DRDY }
>ata1: soft resetting link
>ata1.00: configured for UDMA/33
>ata1: EH complete
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 7 (level, low) -> IRQ 7
>Adding 1574328k swap on /dev/sda7.  Priority:-1 extents:1 across:1574328k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>warning: process `kudzu' used the deprecated sysctl system call with 1.23.
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (12288 buckets, 49152 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>audit(1203888172.531:4): audit_pid=1869 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8

Actions: View

Attachments on bug 433557: 295357 | 295361 | 295755 | 295757 | 297997 | 297999 | 298598 | 377165 | 377167 | 402241