Attachment 296174 Details for Bug 435249 – dmesg output

[patch] dmesg output

dmesg.output (text/plain), 38.55 KB, created by Narendra K on 2008-02-28 09:10:12 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Narendra K

Created: 2008-02-28 09:10:12 UTC

Size: 38.55 KB

patch

obsolete

>Linux version 2.6.18-53.el5 (brewbuilder@hs20-bc1-7.build.redhat.com) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP Wed Oct 10 16:34:19 EDT 2007
>Command line: ro root=/dev/VolGroup01/LogVol00 rhgb quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 0000000000100000 - 00000000cfbc0000 (usable)
> BIOS-e820: 00000000cfbc0000 - 00000000cfbcfc00 (ACPI data)
> BIOS-e820: 00000000cfbcfc00 - 00000000cfbff000 (reserved)
> BIOS-e820: 00000000cfc00000 - 00000000d0000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000fec90000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 00000001ffffe000 (usable)
> BIOS-e820: 0000000200000000 - 00000002ffffe000 (usable)
> BIOS-e820: 0000000300000000 - 00000003ffffe000 (usable)
> BIOS-e820: 0000000400000000 - 0000000430000000 (usable)
>DMI 2.3 present.
>ACPI: RSDP (v000 DELL                                  ) @ 0x00000000000fcd80
>ACPI: RSDT (v001 DELL   PE68x0   0x00000001 MSFT 0x0100000a) @ 0x00000000000fcd94
>ACPI: FADT (v001 DELL   PE68x0   0x00000001 MSFT 0x0100000a) @ 0x00000000000fce14
>ACPI: MADT (v001 DELL   PE68x0   0x00000001 MSFT 0x0100000a) @ 0x00000000000fce88
>ACPI: SPCR (v001 DELL   PE68x0   0x00000001 MSFT 0x0100000a) @ 0x00000000000fcfe4
>ACPI: HPET (v001 DELL   PE68x0   0x00000001 MSFT 0x0100000a) @ 0x00000000000fd034
>ACPI: MCFG (v001 DELL   PE68x0   0x00000001 MSFT 0x0100000a) @ 0x00000000000fd06c
>ACPI: SRAT (v001 DELL   PE68x0   0x00000001 MSFT 0x0100000a) @ 0x00000000000fd0a8
>ACPI: SSDT (v001 DpgPmm  Cpu0Ist 0x00000011 INTL 0x20040527) @ 0x00000000cfbc8e52
>ACPI: SSDT (v001 DpgPmm  Cpu1Ist 0x00000011 INTL 0x20040527) @ 0x00000000cfbc925b
>ACPI: SSDT (v001 DpgPmm  Cpu2Ist 0x00000011 INTL 0x20040527) @ 0x00000000cfbc9664
>ACPI: SSDT (v001 DpgPmm  Cpu3Ist 0x00000011 INTL 0x20040527) @ 0x00000000cfbc9a6d
>ACPI: SSDT (v001 DpgPmm  Cpu4Ist 0x00000011 INTL 0x20040527) @ 0x00000000cfbc9e76
>ACPI: SSDT (v001 DpgPmm  Cpu5Ist 0x00000011 INTL 0x20040527) @ 0x00000000cfbca27f
>ACPI: SSDT (v001 DpgPmm  Cpu6Ist 0x00000011 INTL 0x20040527) @ 0x00000000cfbca688
>ACPI: SSDT (v001 DpgPmm  Cpu7Ist 0x00000011 INTL 0x20040527) @ 0x00000000cfbcaa91
>ACPI: SSDT (v001 DpgPmm    CpuPm 0x00000010 INTL 0x20040527) @ 0x00000000cfbcae9a
>ACPI: DSDT (v001 DELL   PE68x0   0x00000001 MSFT 0x0100000e) @ 0x0000000000000000
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000430000000
>Bootmem setup node 0 0000000000000000-0000000430000000
>Memory for crash kernel (0x0 to 0x0) notwithin permissible range
>disabling kdump
>On node 0 totalpages: 4131835
>  DMA zone: 2697 pages, LIFO batch:0
>  DMA32 zone: 832504 pages, LIFO batch:31
>  Normal zone: 3296634 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x08] enabled)
>Processor #8 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
>Processor #6 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x0e] enabled)
>Processor #14 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
>Processor #1 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x09] enabled)
>Processor #9 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
>Processor #7 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x08] lapic_id[0x0f] enabled)
>Processor #15 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x09] lapic_id[0x04] disabled)
>ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0c] disabled)
>ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0a] disabled)
>ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x05] disabled)
>ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
>ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x03] disabled)
>ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0b] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
>ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x01] address[0xfec85000] gsi_base[32])
>IOAPIC[1]: apic_id 1, version 32, address 0xfec85000, GSI 32-55
>ACPI: IOAPIC (id[0x02] address[0xfec85800] gsi_base[64])
>IOAPIC[2]: apic_id 2, version 32, address 0xfec85800, GSI 64-87
>ACPI: IOAPIC (id[0x03] address[0xfec86000] gsi_base[96])
>IOAPIC[3]: apic_id 3, version 32, address 0xfec86000, GSI 96-119
>ACPI: IOAPIC (id[0x04] address[0xfec86800] gsi_base[128])
>IOAPIC[4]: apic_id 4, version 32, address 0xfec86800, GSI 128-151
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to physical flat
>ACPI: HPET id: 0xffffffff base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 00000000000a0000 - 0000000000100000
>Nosave address range: 00000000cfbc0000 - 00000000cfbcf000
>Nosave address range: 00000000cfbcf000 - 00000000cfbd0000
>Nosave address range: 00000000cfbd0000 - 00000000cfbff000
>Nosave address range: 00000000cfbff000 - 00000000cfc00000
>Nosave address range: 00000000cfc00000 - 00000000d0000000
>Nosave address range: 00000000d0000000 - 00000000e0000000
>Nosave address range: 00000000e0000000 - 00000000fec90000
>Nosave address range: 00000000fec90000 - 00000000fed00000
>Nosave address range: 00000000fed00000 - 00000000fee00000
>Nosave address range: 00000000fee00000 - 00000000fee10000
>Nosave address range: 00000000fee10000 - 00000000ffb00000
>Nosave address range: 00000000ffb00000 - 0000000100000000
>Nosave address range: 00000001ffffe000 - 0000000200000000
>Nosave address range: 00000002ffffe000 - 0000000300000000
>Nosave address range: 00000003ffffe000 - 0000000400000000
>Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
>SMP: Allowing 16 CPUs, 8 hotplug CPUs
>Built 1 zonelists.  Total pages: 4131835
>Kernel command line: ro root=/dev/VolGroup01/LogVol00 rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
>Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>Checking aperture...
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing software IO TLB between 0x289b000 - 0x689b000
>Memory: 16432740k/17563648k available (2434k kernel code, 339716k reserved, 1235k data, 192k init)
>Calibrating delay using timer specific routine.. 7321.84 BogoMIPS (lpj=3660923)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM1)
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>Using local APIC timer interrupts.
>result 10391307
>Detected 10.391 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/8 APIC 0x8
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 7315.20 BogoMIPS (lpj=3657603)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 4
>CPU: Processor Core ID: 0
>CPU1: Thermal monitoring enabled (TM2)
>               Intel(R) Xeon(TM) MP CPU 3.66GHz stepping 01
>SMP alternatives: switching to SMP code
>Booting processor 2/8 APIC 0x6
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 7315.07 BogoMIPS (lpj=3657536)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 3
>CPU: Processor Core ID: 0
>CPU2: Thermal monitoring enabled (TM2)
>               Intel(R) Xeon(TM) MP CPU 3.66GHz stepping 01
>SMP alternatives: switching to SMP code
>Booting processor 3/8 APIC 0xe
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 7315.21 BogoMIPS (lpj=3657606)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 7
>CPU: Processor Core ID: 0
>CPU3: Thermal monitoring enabled (TM2)
>               Intel(R) Xeon(TM) MP CPU 3.66GHz stepping 01
>SMP alternatives: switching to SMP code
>Booting processor 4/8 APIC 0x1
>Initializing CPU#4
>Calibrating delay using timer specific routine.. 7315.01 BogoMIPS (lpj=3657509)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU4: Thermal monitoring enabled (TM2)
>               Intel(R) Xeon(TM) MP CPU 3.66GHz stepping 01
>SMP alternatives: switching to SMP code
>Booting processor 5/8 APIC 0x9
>Initializing CPU#5
>Calibrating delay using timer specific routine.. 7315.19 BogoMIPS (lpj=3657596)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 4
>CPU: Processor Core ID: 0
>CPU5: Thermal monitoring enabled (TM2)
>               Intel(R) Xeon(TM) MP CPU 3.66GHz stepping 01
>SMP alternatives: switching to SMP code
>Booting processor 6/8 APIC 0x7
>Initializing CPU#6
>Calibrating delay using timer specific routine.. 7315.20 BogoMIPS (lpj=3657601)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 3
>CPU: Processor Core ID: 0
>CPU6: Thermal monitoring enabled (TM2)
>               Intel(R) Xeon(TM) MP CPU 3.66GHz stepping 01
>SMP alternatives: switching to SMP code
>Booting processor 7/8 APIC 0xf
>Initializing CPU#7
>Calibrating delay using timer specific routine.. 7315.11 BogoMIPS (lpj=3657556)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 7
>CPU: Processor Core ID: 0
>CPU7: Thermal monitoring enabled (TM2)
>               Intel(R) Xeon(TM) MP CPU 3.66GHz stepping 01
>Brought up 8 CPUs
>testing NMI watchdog ... OK.
>time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
>time.c: Detected 3657.780 MHz processor.
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=216 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=96 bytes
>sizeof(skbuff)=240 bytes
>migration_cost=16,547
>checking if image is initramfs... it is
>Freeing initrd memory: 3121k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG at e0000000
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: Device [M4] status [0000000c]: functional but not present; setting present
>ACPI: Device [M2] status [0000000c]: functional but not present; setting present
>ACPI: Device [M5] status [0000000c]: functional but not present; setting present
>ACPI: Device [M3] status [0000000c]: functional but not present; setting present
>ACPI: Device [M1] status [0000000c]: functional but not present; setting present
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 0880-08bf claimed by ICH4 GPIO
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>PCI: PXH quirk detected, disabling MSI for SHPC device
>PCI: PXH quirk detected, disabling MSI for SHPC device
>Boot video device is 0000:14:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PAHI._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PAHI.DOBA._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PAHI.DOBB._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PALO._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PALO.PXA0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PALO.PXA2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBHI._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBLO._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCLO._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCHI._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PDLO._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PICH._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 12 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>PCI-GART: No AMD northbridge found.
>pnp: 00:07: ioport range 0x800-0x87f could not be reserved
>pnp: 00:07: ioport range 0x880-0x8bf has been reserved
>pnp: 00:07: ioport range 0x8c0-0x8df has been reserved
>pnp: 00:07: ioport range 0xc00-0xc1f has been reserved
>pnp: 00:07: ioport range 0xc10-0xc1f has been reserved
>pnp: 00:07: ioport range 0xca0-0xca7 has been reserved
>pnp: 00:07: ioport range 0xca9-0xcab has been reserved
>pnp: 00:07: ioport range 0xcad-0xcaf has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: e000-efff
>  MEM window: dfd00000-dfefffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:02.0
>  IO window: d000-dfff
>  MEM window: dfc00000-dfcfffff
>  PREFETCH window: da000000-daffffff
>PCI: Bridge: 0000:00:03.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:04.0
>  IO window: c000-cfff
>  MEM window: dfa00000-dfbfffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:05.0
>  IO window: b000-bfff
>  MEM window: df900000-df9fffff
>  PREFETCH window: d9000000-d9ffffff
>PCI: Bridge: 0000:0e:00.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:0e:00.2
>  IO window: a000-afff
>  MEM window: df700000-df8fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:06.0
>  IO window: a000-afff
>  MEM window: df600000-df8fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:11:00.0
>  IO window: 9000-9fff
>  MEM window: df400000-df5fffff
>  PREFETCH window: d8000000-d8ffffff
>PCI: Bridge: 0000:11:00.2
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:07.0
>  IO window: 9000-9fff
>  MEM window: df300000-df5fffff
>  PREFETCH window: d8000000-d8ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 8000-8fff
>  MEM window: df100000-df2fffff
>  PREFETCH window: d0000000-d7ffffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>PCI: Setting latency timer of device 0000:0e:00.0 to 64
>PCI: Setting latency timer of device 0000:0e:00.2 to 64
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>PCI: Setting latency timer of device 0000:11:00.0 to 64
>PCI: Setting latency timer of device 0000:11:00.2 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>audit: initializing netlink socket (disabled)
>audit(1204180644.583:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key 836E299A424CB51A
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>Allocate Port Service[0000:00:01.0:pcie01]
>Allocate Port Service[0000:00:01.0:pcie02]
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>Allocate Port Service[0000:00:02.0:pcie01]
>Allocate Port Service[0000:00:02.0:pcie02]
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.0:pcie00]
>Allocate Port Service[0000:00:03.0:pcie01]
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:04.0:pcie00]
>Allocate Port Service[0000:00:04.0:pcie01]
>Allocate Port Service[0000:00:04.0:pcie02]
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:05.0:pcie00]
>Allocate Port Service[0000:00:05.0:pcie01]
>Allocate Port Service[0000:00:05.0:pcie02]
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:06.0:pcie00]
>Allocate Port Service[0000:00:06.0:pcie01]
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:07.0:pcie00]
>Allocate Port Service[0000:00:07.0:pcie01]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x9
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0xa
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0xb
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0xc
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0xd
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0xe
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0xf
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x10
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH5: IDE controller at PCI slot 0000:00:1f.1
>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>ACPI: Unable to derive IRQ for device 0000:00:1f.1
>ACPI: PCI Interrupt 0000:00:1f.1[A]: no GSI
>ICH5: chipset revision 2
>ICH5: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>hda: HL-DT-ST GCR-8240N, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>Probing IDE interface ide1...
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>ACPI: (supports S0 S4 S5)
>Freeing unused kernel memory: 192k freed
>Write protecting the kernel read-only data: 468k
>USB Universal Host Controller Interface driver v3.0
>GSI 16 sharing vector 0xE9 and IRQ 16
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 233
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 233, io base 0x00007ce0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>GSI 17 sharing vector 0x32 and IRQ 17
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 50
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 50, io base 0x00007cc0
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>GSI 18 sharing vector 0x3A and IRQ 18
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 58
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 58, io base 0x00007ca0
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>GSI 19 sharing vector 0x42 and IRQ 19
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 66
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 66, io mem 0xdff00000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 6 ports detected
>SCSI subsystem initialized
>Fusion MPT base driver 3.04.04
>Copyright (c) 1999-2007 LSI Logic Corporation
>Fusion MPT SPI Host driver 3.04.04
>GSI 20 sharing vector 0x4A and IRQ 20
>ACPI: PCI Interrupt 0000:12:05.0[A] -> GSI 96 (level, low) -> IRQ 74
>mptbase: Initiating ioc0 bringup
>ioc0: 53C1030: Capabilities={Initiator,Target}
>usb 4-3: new high speed USB device using ehci_hcd and address 2
>scsi0 : ioc0: LSI53C1030, FwRev=01032300h, Ports=1, MaxQ=255, IRQ=74
>usb 4-3: configuration #1 chosen from 1 choice
>hub 4-3:1.0: USB hub found
>hub 4-3:1.0: 2 ports detected
>usb 3-2: new low speed USB device using uhci_hcd and address 2
>usb 3-2: configuration #1 chosen from 1 choice
>input: Tripplite B015-000 R0.74 USB to PS2 adapter. as /class/input/input0
>input: USB HID v1.10 Keyboard [Tripplite B015-000 R0.74 USB to PS2 adapter.] on usb-0000:00:1d.2-2
>  Vendor: FUJITSU   Model: MAS3367NC         Rev: 5B06
>  Type:   Direct-Access                      ANSI SCSI revision: 03
> target0:0:0: Beginning Domain Validation
>input: Tripplite B015-000 R0.74 USB to PS2 adapter. as /class/input/input1
>input: USB HID v1.10 Mouse [Tripplite B015-000 R0.74 USB to PS2 adapter.] on usb-0000:00:1d.2-2
> target0:0:0: Ending Domain Validation
> target0:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI PCOMP (6.25 ns, offset 127)
>SCSI device sda: 71132959 512-byte hdwr sectors (36420 MB)
>sda: Write Protect is off
>sda: Mode Sense: b3 00 00 08
>SCSI device sda: drive cache: write through
>SCSI device sda: 71132959 512-byte hdwr sectors (36420 MB)
>sda: Write Protect is off
>sda: Mode Sense: b3 00 00 08
>SCSI device sda: drive cache: write through
> sda: sda1 sda2
>sd 0:0:0:0: Attached scsi disk sda
>  Vendor: FUJITSU   Model: MAP3367NC         Rev: 5605
>  Type:   Direct-Access                      ANSI SCSI revision: 03
> target0:0:1: Beginning Domain Validation
> target0:0:1: Ending Domain Validation
> target0:0:1: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI PCOMP (6.25 ns, offset 127)
>SCSI device sdb: 71132959 512-byte hdwr sectors (36420 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: b3 00 00 08
>SCSI device sdb: drive cache: write through
>SCSI device sdb: 71132959 512-byte hdwr sectors (36420 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: b3 00 00 08
>SCSI device sdb: drive cache: write through
> sdb: sdb1
>sd 0:0:1:0: Attached scsi disk sdb
>  Vendor: MAXTOR    Model: ATLAS10K5_73SCA   Rev: JNZY
>  Type:   Direct-Access                      ANSI SCSI revision: 03
> target0:0:2: Beginning Domain Validation
> target0:0:2: Ending Domain Validation
> target0:0:2: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI (6.25 ns, offset 127)
>SCSI device sdc: 143374650 512-byte hdwr sectors (73408 MB)
>sdc: Write Protect is off
>sdc: Mode Sense: bf 00 10 08
>SCSI device sdc: drive cache: write through w/ FUA
>SCSI device sdc: 143374650 512-byte hdwr sectors (73408 MB)
>sdc: Write Protect is off
>sdc: Mode Sense: bf 00 10 08
>SCSI device sdc: drive cache: write through w/ FUA
> sdc: sdc1 sdc2
>sd 0:0:2:0: Attached scsi disk sdc
>  Vendor: FUJITSU   Model: MAT3300NC         Rev: 5704
>  Type:   Direct-Access                      ANSI SCSI revision: 03
> target0:0:3: Beginning Domain Validation
> target0:0:3: Ending Domain Validation
> target0:0:3: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI WRFLOW PCOMP (6.25 ns, offset 127)
>SCSI device sdd: 585937500 512-byte hdwr sectors (300000 MB)
>sdd: Write Protect is off
>sdd: Mode Sense: b3 00 00 08
>SCSI device sdd: drive cache: write through
>SCSI device sdd: 585937500 512-byte hdwr sectors (300000 MB)
>sdd: Write Protect is off
>sdd: Mode Sense: b3 00 00 08
>SCSI device sdd: drive cache: write through
> sdd: sdd1
>sd 0:0:3:0: Attached scsi disk sdd
>  Vendor: PE/PV     Model: 1x10 SCSI BP      Rev: 1.0 
>  Type:   Processor                          ANSI SCSI revision: 02
> target0:0:6: Beginning Domain Validation
> target0:0:6: Ending Domain Validation
> target0:0:6: asynchronous
>GSI 21 sharing vector 0x52 and IRQ 21
>ACPI: PCI Interrupt 0000:12:05.1[B] -> GSI 97 (level, low) -> IRQ 82
>mptbase: Initiating ioc1 bringup
>ioc1: 53C1030: Capabilities={Initiator,Target}
>scsi1 : ioc1: LSI53C1030, FwRev=01032300h, Ports=1, MaxQ=255, IRQ=82
>libata version 2.21 loaded.
>device-mapper: ioctl: 4.11.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1204180659.668:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1658 types, 210 bools, 1 sens, 1024 cats
>security:  61 classes, 57675 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1204180659.926:3): policy loaded auid=4294967295
>hda: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>intel_rng: FWH not detected
>tg3.c:v3.80 (August 2, 2007)
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 233
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>eth0: Tigon3 [partno(BCM95721A211) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:10:18:0a:f5:9e
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 16 (level, low) -> IRQ 233
>PCI: Setting latency timer of device 0000:08:00.0 to 64
>eth1: Tigon3 [partno(BCM95721A211) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:10:18:0a:f5:ba
>eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
>eth1: dma_rwctrl[76180000] dma_mask[64-bit]
>GSI 22 sharing vector 0x5A and IRQ 22
>ACPI: PCI Interrupt 0000:10:02.0[A] -> GSI 64 (level, low) -> IRQ 90
>eth2: Tigon3 [partno(BCM95704A6) rev 2100 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:0f:1f:ff:d2:cc
>eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[0]
>eth2: dma_rwctrl[769f4000] dma_mask[64-bit]
>GSI 23 sharing vector 0x62 and IRQ 23
>ACPI: PCI Interrupt 0000:10:02.1[B] -> GSI 65 (level, low) -> IRQ 98
>eth3: Tigon3 [partno(BCM95704A6) rev 2100 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:0f:1f:ff:d2:cd
>eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
>eth3: dma_rwctrl[769f4000] dma_mask[64-bit]
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:1:0: Attached scsi generic sg1 type 0
>sd 0:0:2:0: Attached scsi generic sg2 type 0
>sd 0:0:3:0: Attached scsi generic sg3 type 0
>scsi 0:0:6:0: Attached scsi generic sg4 type 3
>input: PC Speaker as /class/input/input2
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a National Semiconductor PC87306
>lp: driver loaded but no devices found
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>mtrr: type mismatch for d0000000,1000000 old: write-back new: write-combining
>Hotplug Mem Device 
>Hotplug Mem Device 
>Hotplug Mem Device 
>Hotplug Mem Device 
>Hotplug Mem Device 
>ACPI: Power Button (FF) [PWRF]
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdc1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdc1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 2031608k swap on /dev/VolGroup01/LogVol01.  Priority:-1 extents:1 across:2031608k
>Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-2 extents:1 across:2031608k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
>acpi-cpufreq: CPU0 - ACPI performance management activated.
>acpi-cpufreq: CPU1 - ACPI performance management activated.
>acpi-cpufreq: CPU2 - ACPI performance management activated.
>acpi-cpufreq: CPU3 - ACPI performance management activated.
>acpi-cpufreq: CPU4 - ACPI performance management activated.
>acpi-cpufreq: CPU5 - ACPI performance management activated.
>acpi-cpufreq: CPU6 - ACPI performance management activated.
>acpi-cpufreq: CPU7 - ACPI performance management activated.
>Ethernet Channel Bonding Driver: v3.1.2 (January 20, 2007)
>bonding: In ALB mode you might experience client disconnections upon reconnection of a link if the bonding module updelay parameter (0 msec) is incompatible with the forwarding delay time of the switch
>bonding: MII link monitoring set to 100 ms
>ADDRCONF(NETDEV_UP): bond0: link is not ready
>bonding: bond0: Adding slave eth2.
>ADDRCONF(NETDEV_UP): eth2: link is not ready
>bonding: bond0: enslaving eth2 as an active interface with a down link.
>bonding: bond0: Adding slave eth3.
>ADDRCONF(NETDEV_UP): eth3: link is not ready
>bonding: bond0: enslaving eth3 as an active interface with a down link.
>tg3: eth2: Link is up at 1000 Mbps, full duplex.
>tg3: eth2: Flow control is off for TX and off for RX.
>ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
>bonding: bond0: link status definitely up for interface eth2.
>bonding: bond0: making interface eth2 the new active one.
>RTNL: assertion failed at net/core/fib_rules.c (388)
>
>Call Trace:
> <IRQ>  [<ffffffff8021caa5>] fib_rules_event+0x3d/0xff
> [<ffffffff80064def>] notifier_call_chain+0x20/0x32
> [<ffffffff8020fc95>] dev_set_mac_address+0x52/0x58
> [<ffffffff8834dceb>] :bonding:alb_set_slave_mac_addr+0x41/0x6c
> [<ffffffff8834e16b>] :bonding:alb_swap_mac_addr+0x95/0x163
> [<ffffffff883490a6>] :bonding:bond_change_active_slave+0x205/0x360
> [<ffffffff8834952d>] :bonding:bond_select_active_slave+0xa4/0xd9
> [<ffffffff8834affe>] :bonding:bond_mii_monitor+0x3bd/0x403
> [<ffffffff8834ac41>] :bonding:bond_mii_monitor+0x0/0x403
> [<ffffffff800928ea>] run_timer_softirq+0x133/0x1b0
> [<ffffffff80011cb4>] __do_softirq+0x5e/0xd5
> [<ffffffff8005c2fc>] call_softirq+0x1c/0x28
> [<ffffffff8006a53a>] do_softirq+0x2c/0x85
> [<ffffffff80054ef0>] mwait_idle+0x0/0x4a
> [<ffffffff8005bc8e>] apic_timer_interrupt+0x66/0x6c
> <EOI>  [<ffffffff80054f26>] mwait_idle+0x36/0x4a
> [<ffffffff80046f8d>] cpu_idle+0x95/0xb8
> [<ffffffff80074501>] start_secondary+0x45a/0x469
>
>RTNL: assertion failed at net/ipv4/devinet.c (984)
>
>Call Trace:
> <IRQ>  [<ffffffff80241dee>] inetdev_event+0x48/0x282
> [<ffffffff8003cc8d>] rt_run_flush+0x7f/0xb8
> [<ffffffff80064def>] notifier_call_chain+0x20/0x32
> [<ffffffff8020fc95>] dev_set_mac_address+0x52/0x58
> [<ffffffff8834dceb>] :bonding:alb_set_slave_mac_addr+0x41/0x6c
> [<ffffffff8834e16b>] :bonding:alb_swap_mac_addr+0x95/0x163
> [<ffffffff883490a6>] :bonding:bond_change_active_slave+0x205/0x360
> [<ffffffff8834952d>] :bonding:bond_select_active_slave+0xa4/0xd9
> [<ffffffff8834affe>] :bonding:bond_mii_monitor+0x3bd/0x403
> [<ffffffff8834ac41>] :bonding:bond_mii_monitor+0x0/0x403
> [<ffffffff800928ea>] run_timer_softirq+0x133/0x1b0
> [<ffffffff80011cb4>] __do_softirq+0x5e/0xd5
> [<ffffffff8005c2fc>] call_softirq+0x1c/0x28
> [<ffffffff8006a53a>] do_softirq+0x2c/0x85
> [<ffffffff80054ef0>] mwait_idle+0x0/0x4a
> [<ffffffff8005bc8e>] apic_timer_interrupt+0x66/0x6c
> <EOI>  [<ffffffff80054f26>] mwait_idle+0x36/0x4a
> [<ffffffff80046f8d>] cpu_idle+0x95/0xb8
> [<ffffffff80074501>] start_secondary+0x45a/0x469
>
>RTNL: assertion failed at net/core/fib_rules.c (388)
>
>Call Trace:
> <IRQ>  [<ffffffff8021caa5>] fib_rules_event+0x3d/0xff
> [<ffffffff80064def>] notifier_call_chain+0x20/0x32
> [<ffffffff8020fc95>] dev_set_mac_address+0x52/0x58
> [<ffffffff8834dceb>] :bonding:alb_set_slave_mac_addr+0x41/0x6c
> [<ffffffff8834e17d>] :bonding:alb_swap_mac_addr+0xa7/0x163
> [<ffffffff883490a6>] :bonding:bond_change_active_slave+0x205/0x360
> [<ffffffff8834952d>] :bonding:bond_select_active_slave+0xa4/0xd9
> [<ffffffff8834affe>] :bonding:bond_mii_monitor+0x3bd/0x403
> [<ffffffff8834ac41>] :bonding:bond_mii_monitor+0x0/0x403
> [<ffffffff800928ea>] run_timer_softirq+0x133/0x1b0
> [<ffffffff80011cb4>] __do_softirq+0x5e/0xd5
> [<ffffffff8005c2fc>] call_softirq+0x1c/0x28
> [<ffffffff8006a53a>] do_softirq+0x2c/0x85
> [<ffffffff80054ef0>] mwait_idle+0x0/0x4a
> [<ffffffff8005bc8e>] apic_timer_interrupt+0x66/0x6c
> <EOI>  [<ffffffff80054f26>] mwait_idle+0x36/0x4a
> [<ffffffff80046f8d>] cpu_idle+0x95/0xb8
> [<ffffffff80074501>] start_secondary+0x45a/0x469
>
>RTNL: assertion failed at net/ipv4/devinet.c (984)
>
>Call Trace:
> <IRQ>  [<ffffffff80241dee>] inetdev_event+0x48/0x282
> [<ffffffff8003cc8d>] rt_run_flush+0x7f/0xb8
> [<ffffffff80064def>] notifier_call_chain+0x20/0x32
> [<ffffffff8020fc95>] dev_set_mac_address+0x52/0x58
> [<ffffffff8834dceb>] :bonding:alb_set_slave_mac_addr+0x41/0x6c
> [<ffffffff8834e17d>] :bonding:alb_swap_mac_addr+0xa7/0x163
> [<ffffffff883490a6>] :bonding:bond_change_active_slave+0x205/0x360
> [<ffffffff8834952d>] :bonding:bond_select_active_slave+0xa4/0xd9
> [<ffffffff8834affe>] :bonding:bond_mii_monitor+0x3bd/0x403
> [<ffffffff8834ac41>] :bonding:bond_mii_monitor+0x0/0x403
> [<ffffffff800928ea>] run_timer_softirq+0x133/0x1b0
> [<ffffffff80011cb4>] __do_softirq+0x5e/0xd5
> [<ffffffff8005c2fc>] call_softirq+0x1c/0x28
> [<ffffffff8006a53a>] do_softirq+0x2c/0x85
> [<ffffffff80054ef0>] mwait_idle+0x0/0x4a
> [<ffffffff8005bc8e>] apic_timer_interrupt+0x66/0x6c
> <EOI>  [<ffffffff80054f26>] mwait_idle+0x36/0x4a
> [<ffffffff80046f8d>] cpu_idle+0x95/0xb8
> [<ffffffff80074501>] start_secondary+0x45a/0x469
>
>bonding: bond0: first active interface up!
>tg3: eth3: Link is up at 1000 Mbps, full duplex.
>tg3: eth3: Flow control is off for TX and off for RX.
>bonding: bond0: link status definitely up for interface eth3.
>ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
>ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: Core ver 2.10
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>eth2: no IPv6 routers present
>bond0: no IPv6 routers present
>eth3: no IPv6 routers present
>mtrr: type mismatch for d0000000,1000000 old: write-back new: write-combining

Actions: View | Diff

Attachments on bug 435249: 296174