Attachment 296598 Details for Bug 434927 – hp-sapphire-01 failed to get a vmcore

hp-sapphire-01 failed to get a vmcore

hp-sapphire-01 (text/plain), 16.70 KB, created by Qian Cai on 2008-03-03 14:06:54 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Qian Cai

Created: 2008-03-03 14:06:54 UTC

Size: 16.70 KB

patch

obsolete

>SysRq : Trigger a crashdump
>Linux version 2.6.18-83.el5 (brewbuilder@ia64-2.build.redhat.com) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-39)) #1 SMP Thu Feb 21 12:15:12 EST 2008
>Ignoring memory below 128MB
>Ignoring memory above 640MB
>EFI v1.10 by HP: SALsystab=0x3e528000 ACPI 2.0=0x3fdd2000 SMBIOS=0x3e52a000 HCDP=0x3fdd0000
>booting generic kernel on platform dig
>PCDP: v3 at 0x3fdd0000
>Early serial console at MMIO 0x84033000 (options '9600n8')
>rsvd_region[0]: [0xe000000008000000, 0xe000000008db2170)
>rsvd_region[1]: [0xe000000008dc0000, 0xe000000008dc0030)
>rsvd_region[2]: [0xe000000027954000, 0xe000000027fbd0c4)
>rsvd_region[3]: [0xe000000027fc4000, 0xe000000027fc40af)
>rsvd_region[4]: [0xe000000027fcc000, 0xe000000027fccb10)
>rsvd_region[5]: [0xe000000027fd4000, 0xe000000027fd4050)
>rsvd_region[6]: [0xffffffffffffffff, 0xffffffffffffffff)
>Initial ramdisk at: 0xe000000027954000 (6721732 bytes)
>SAL 3.20: HP version 2.3
>SAL Platform features: None
>SAL: AP wakeup using external interrupt vector 0xff
>cpu package is Multi-Core capable: number of cores=2
>cpu package is Multi-Threading capable: number of siblings=2
>ACPI: Local APIC address c0000000fee00000
>GSI 25 (level, low) -> CPU 0 (0x0f00) vector 48
>16 CPUs available, 16 CPUs total
>MCA related initialization done
>SMP: Allowing 16 CPUs, 0 hotplug CPUs
>Built 1 zonelists.  Total pages: 31476
>Kernel command line: BOOT_IMAGE=scsi0:EFI\redhat\vmlinuz-2.6.18-83.el5 root=/dev/VolGroup00/LogVol01  ro irqpoll maxcpus=1 reset_devices machvec=dig elfcorehdr=655248K max_addr=640M min_addr=128M
>Misrouted IRQ fixup and polling support enabled
>This may significantly impact system performance
>PID hash table entries: 2048 (order: 11, 16384 bytes)
>Console: colour VGA+ 80x25
>Placing software IO TLB between 0x112b0000 - 0x152b0000
>Memory: 301520k/503616k available (6370k code, 222768k reserved, 3837k data, 448k init)
>McKinley Errata 9 workaround not needed; disabling it
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 65536 (order: 5, 524288 bytes)
>Inode-cache hash table entries: 32768 (order: 4, 262144 bytes)
>Mount-cache hash table entries: 1024
>ACPI: Core revision 20060707
>Boot processor id 0x0/0xf00
>Brought up 1 CPUs
>Total of 1 processors activated (3186.68 BogoMIPS).
>checking if image is initramfs... it is
>Freeing initrd memory: 6560kB freed
>DMI 2.3 present.
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>ACPI: Interpreter enabled
>ACPI: Using IOSAPIC for interrupt routing
>ACPI: PCI Root Bridge [L000] (0000:00)
>ACPI: PCI Root Bridge [L001] (0000:01)
>ACPI: PCI Root Bridge [L002] (0000:0a)
>ACPI: PCI Root Bridge [L003] (0000:0f)
>ACPI: PCI Root Bridge [L004] (0000:14)
>ACPI: PCI Root Bridge [L005] (0000:15)
>ACPI: PCI Root Bridge [L006] (0000:1e)
>ACPI: PCI Root Bridge [L007] (0000:23)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>GSI 24 (level, low) -> CPU 0 (0x0f00) vector 49
>pnp: PnP ACPI: found 11 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 1, 32768 bytes)
>TCP established hash table entries: 16384 (order: 4, 262144 bytes)
>TCP bind hash table entries: 8192 (order: 3, 131072 bytes)
>TCP: Hash tables configured (established 16384 bind 8192)
>TCP reno registered
>perfmon: version 2.0 IRQ 238
>perfmon: Montecito PMU detected, 27 PMCs, 35 PMDs, 12 counters (47 bits)
>PAL Information Facility v0.5
>perfmon: added sampling format default_format
>perfmon_default_smpl: default_format v2.0 registered
>audit: initializing netlink socket (disabled)
>audit(1204535703.198:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
>Warning: Core image elf header not found
>Kdump: vmcore not initialized
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key 84FBDC885C275FE8
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Thermal Zone [THM0] (27 C)
>EFI Time Services Driver v0.4
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 16 ports, IRQ sharing enabled
>00:03: ttyS0 at MMIO 0xff5e2000 (irq = 49) is a 16550A
>GSI 16 (level, low) -> CPU 0 (0x0f00) vector 50
>ACPI: PCI Interrupt 0000:00:01.2[A] -> GSI 16 (level, low) -> IRQ 50
>0000:00:01.2: ttyS1 at MMIO 0x84033000 (irq = 50) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>EFI Variables Facility v0.08 2004-May-17
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Adding console on ttyS1 at MMIO 0x84033000 (options '9600n8')
>Freeing unused kernel memory: 448kB freed
>Mounting proc filesystem
>SCSI subsystem initialized
>
>Mounting sysfs filesystem
>Creating /dev
>Creating initial device nodes
>mknod: /tmp/initrd.mv4196/dev/efirtc: No such file or directory
>Loading scsi_mod.ko module
>HP CISS Driver (v 3.6.20-RH1)
>Loading sd_mod.ko module
>Loading cciss.ko module
>GSI 60 (level, low) -> CPU 0 (0x0f00) vector 51
>ACPI: PCI Interrupt 0000:14:01.0[A] -> GSI 60 (level, low) -> IRQ 51
>cciss0: <0x3220> at PCI 0000:14:01.0 IRQ 51 using DAC
>      blocks= 143305920 block_size= 512
>      heads= 255, sectors= 32, cylinders= 17562
>
>      blocks= 143305920 block_size= 512
>      heads= 255, sectors= 32, cylinders= 17562
>
>      blocks= 143305920 block_size= 512
>      heads= 255, sectors= 32, cylinders= 17562
>
>      blocks= 143305920 block_size= 512
>      heads= 255, sectors= 32, cylinders= 17562
>
> cciss/c0d0: p1 p2
>      blocks= 143305920 block_size= 512
>      heads= 255, sectors= 32, cylinders= 17562
>
> cciss/c0d1: p1
>      blocks= 143305920 block_size= 512
>      heads= 255, sectors= 32, cylinders= 17562
>
> cciss/c0d2: p1
>GSI 64 (level, low) -> CPU 0 (0x0f00) vector 52
>ACPI: PCI Interrupt 0000:14:02.0[A] -> GSI 64 (level, low) -> IRQ 52
>cciss1: <0x3220> at PCI 0000:14:02.0 IRQ 52 using DAC
>      blocks= 859846995 block_size= 512
>      heads= 255, sectors= 63, cylinders= 53523
>
>      blocks= 859846995 block_size= 512
>      heads= 255, sectors= 63, cylinders= 53523
>
> cciss/c1d0: p1
>GSI 93 (level, low) -> CPU 0 (0x0f00) vector 53
>ACPI: PCI Interrupt 0000:23:01.0[A] -> GSI 93 (level, low) -> IRQ 53
>cciss2: <0x3220> at PCI 0000:23:01.0 IRQ 53 using DAC
>Emulex LightPulse Fibre Channel SCSI driver 8.2.0.13
>Loading scsi_transport_fc.ko module
>Loading lpfc.ko module
>Copyright(c) 2004-2007 Emulex.  All rights reserved.
>GSI 49 (level, low) -> CPU 0 (0x0f00) vector 54
>ACPI: PCI Interrupt 0000:0f:01.0[A] -> GSI 49 (level, low) -> IRQ 54
>scsi0 :  on PCI bus 0f device 08 irq 54
>GSI 82 (level, low) -> CPU 0 (0x0f00) vector 55
>ACPI: PCI Interrupt 0000:1e:01.0[A] -> GSI 82 (level, low) -> IRQ 55
>scsi1 :  on PCI bus 1e device 08 irq 55
>GSI 83 (level, low) -> CPU 0 (0x0f00) vector 56
>ACPI: PCI Interrupt 0000:1e:01.1[B] -> GSI 83 (level, low) -> IRQ 56
>scsi2 :  on PCI bus 1e device 09 irq 56
>QLogic Fibre Channel HBA Driver
>Loading qla2xxx.ko module
>GSI 38 (level, low) -> CPU 0 (0x0f00) vector 57
>ACPI: PCI Interrupt 0000:0a:01.0[A] -> GSI 38 (level, low) -> IRQ 57
>qla2xxx 0000:0a:01.0: Found an ISP2422, irq 57, iobase 0xc0000000a0040000
>qla2xxx 0000:0a:01.0: Configuring PCI space...
>qla2xxx 0000:0a:01.0: Configure NVRAM parameters...
>qla2xxx 0000:0a:01.0: Verifying loaded RISC code...
>qla2xxx 0000:0a:01.0: Allocated (64 KB) for EFT...
>qla2xxx 0000:0a:01.0: Allocated (1413 KB) for firmware dump...
>scsi3 : qla2xxx
>qla2xxx 0000:0a:01.0: 
> QLogic Fibre Channel HBA Driver: 8.02.00-k5-rhel5.2-02
>  QLogic HP AB429-60001 - 
>  ISP2422: PCI-X Mode 1 (133 MHz) @ 0000:0a:01.0 hdma-, host#=3, fw=4.02.02 [Multi-ID] 
>GSI 71 (level, low) -> CPU 0 (0x0f00) vector 60
>ACPI: PCI Interrupt 0000:15:01.0[A] -> GSI 71 (level, low) -> IRQ 60
>qla2xxx 0000:15:01.0: Found an ISP2422, irq 60, iobase 0xc0000000d01c1000
>qla2xxx 0000:15:01.0: Configuring PCI space...
>qla2xxx 0000:15:01.0: Configure NVRAM parameters...
>qla2xxx 0000:15:01.0: Verifying loaded RISC code...
>qla2xxx 0000:15:01.0: Allocated (64 KB) for EFT...
>qla2xxx 0000:15:01.0: Allocated (1413 KB) for firmware dump...
>scsi4 : qla2xxx
>qla2xxx 0000:15:01.0: 
> QLogic Fibre Channel HBA Driver: 8.02.00-k5-rhel5.2-02
>  QLogic HP AB379-60001 - 
>  ISP2422: PCI-X Mode 1 (66 MHz) @ 0000:15:01.0 hdma-, host#=4, fw=4.02.02 [Multi-ID] 
>GSI 72 (level, low) -> CPU 0 (0x0f00) vector 62
>ACPI: PCI Interrupt 0000:15:01.1[B] -> GSI 72 (level, low) -> IRQ 62
>qla2xxx 0000:15:01.1: Found an ISP2422, irq 62, iobase 0xc0000000d01c0000
>qla2xxx 0000:15:01.1: Configuring PCI space...
>qla2xxx 0000:15:01.1: Configure NVRAM parameters...
>qla2xxx 0000:15:01.1: Verifying loaded RISC code...
>qla2xxx 0000:15:01.1: Allocated (64 KB) for EFT...
>qla2xxx 0000:15:01.1: Allocated (1413 KB) for firmware dump...
>scsi5 : qla2xxx
>qla2xxx 0000:15:01.1: 
> QLogic Fibre Channel HBA Driver: 8.02.00-k5-rhel5.2-02
>  QLogic HP AB379-60001 - 
>  ISP2422: PCI-X Mode 1 (66 MHz) @ 0000:15:01.1 hdma-, host#=5, fw=4.02.02 [Multi-ID] 
>Initializing USB Mass Storage driver...
>Loading usb-storage.ko module
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>Waiting 8 seconds for driver initialization.
>Loading jbd.ko module
>Loading ext3.ko module
>device-mapper: uevent: version 1.0.3
>Loading dm-mod.ko module
>device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
>md: raid0 personality registered for level 0
>Loading dm-mirror.ko module
>Loading dm-zero.ko module
>Loading dm-snapshot.ko module
>Loading raid0.ko module
>Creating Block Devices
>Creating block device cciss/c0d0
>Creating block device cciss/c0d1
>Creating block device cciss/c0d2
>Creating block device cciss/c1d0
>Creating block device cciss/c2d0
>Creating block device ram0
>Creating block device ram1
>Creating block device ram10
>Creating block device ram11
>Creating block device ram12
>Creating block device ram13
>Creating block device ram14
>Creating block device ram15
>Creating block device ram2
>Creating block device ram3
>Creating block device ram4
>Creating block device ram5
>md: md0 stopped.
>Creating block device ram6
>Creating block device ram7
>Creating block device ram8
>Creating block device ram9
>Making device-mapper control node
>md: bind<cciss/c0d1p1>
>md: bind<cciss/c0d2p1>
>md: bind<cciss/c1d0p1>
>md: bind<cciss/c0d0p2>
>md0: setting max_sectors to 512, segment boundary to 131071
>raid0: looking at cciss/c0d0p2
>raid0:   comparing cciss/c0d0p2(71550208) with cciss/c0d0p2(71550208)
>raid0:   END
>raid0:   ==> UNIQUE
>raid0: 1 zones
>raid0: looking at cciss/c1d0p1
>raid0:   comparing cciss/c1d0p1(429923328) with cciss/c0d0p2(71550208)
>raid0:   NOT EQUAL
>raid0:   comparing cciss/c1d0p1(429923328) with cciss/c1d0p1(429923328)
>raid0:   END
>raid0:   ==> UNIQUE
>raid0: 2 zones
>raid0: looking at cciss/c0d2p1
>raid0:   comparing cciss/c0d2p1(71652608) with cciss/c0d0p2(71550208)
>raid0:   NOT EQUAL
>raid0:   comparing cciss/c0d2p1(71652608) with cciss/c1d0p1(429923328)
>raid0:   NOT EQUAL
>raid0:   comparing cciss/c0d2p1(71652608) with cciss/c0d2p1(71652608)
>raid0:   END
>raid0:   ==> UNIQUE
>raid0: 3 zones
>raid0: looking at cciss/c0d1p1
>raid0:   comparing cciss/c0d1p1(71652608) with cciss/c0d0p2(71550208)
>raid0:   NOT EQUAL
>raid0:   comparing cciss/c0d1p1(71652608) with cciss/c1d0p1(429923328)
>raid0:   NOT EQUAL
>raid0:   comparing cciss/c0d1p1(71652608) with cciss/c0d2p1(71652608)
>raid0:   EQUAL
>raid0: FINAL 3 zones
>raid0: zone 1
>raid0: checking cciss/c0d0p2 ... nope.
>raid0: checking cciss/c0d1p1 ... contained as device 0
>  (71652608) is smallest!.
>raid0: checking cciss/c0d2p1 ... contained as device 1
>raid0: checking cciss/c1d0p1 ... contained as device 2
>raid0: zone->nb_dev: 3, size: 307200
>raid0: current zone offset: 71652608
>raid0: zone 2
>raid0: checking cciss/c0d0p2 ... nope.
>raid0: checking cciss/c0d1p1 ... nope.
>raid0: checking cciss/c0d2p1 ... nope.
>raid0: checking cciss/c1d0p1 ... contained as device 0
>  (429923328) is smallest!.
>raid0: zone->nb_dev: 1, size: 358270720
>raid0: current zone offset: 429923328
>raid0: done.
>raid0 : md_size is 644778752 blocks.
>raid0 : conf->hash_spacing is 286200832 blocks.
>raid0 : nb_zone is 3.
>raid0 : Allocating 24 bytes for hash.
>mdadm: /dev/md0 has been started with 4 drives.
>Scanning logical volumes
>  Reading all physical volumes.  This may take a while...
>  Found volume group "VolGroup00" using metadata type lvm2
>Activating logical volumes
>  2 logical volume(s) in volume group "VolGroup00" now active
>hwclock: Could not access RTC: No such file or directory
>Attempting to enter user-space to capture vmcore
>Creating root device.
>Checking root filesystem.
>fsck 1.38 (30-Jun-2005)
>fsck: WARNING: couldn't open /etc/fstab: No such file or directory
>e2fsck 1.38 (30-Jun-2005)
>fsck.ext3: while determining whether /dev/VolGroup00/LogVol01 is mounted.
>/dev/VolGroup00/LogVol01: recovering journal
>kjournald starting.  Commit interval 5 seconds
>/dev/VolGroup00/LogVol01: clean, 68684/160169984 files, 5659395/160145408 blocks
>Mounting root filesystem.
>Trying mount -t ext3 /dev/VolGroup00/LogVol01 /sysroot
>EXT3 FS on dm-0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Using ext3 on root filesystem
>Switching to new root and running init.
>audit(1204535800.723:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>audit(1204535800.967:3): policy loaded auid=4294967295 ses=4294967295
>
>INIT: version 2.86 booting
>
>		Welcome to Red Hat Enterprise Linux Server
>		Press 'I' to enter interactive startup.
>Cannot access the Hardware Clock via any known method.
>Use the --debug option to see the details of our search for an access method.
>Setting clock  (utc): Mon Mar  3 04:16:42 EST 2008 [  OK  ]
>
>Starting udev: [  OK  ]
>
>Loading default keymap (us): [  OK  ]
>
>Setting hostname hp-sapphire-01.rhts.boston.redhat.com:  [  OK  ]
>
>Setting up Logical Volume Management:   2 logical volume(s) in volume group "VolGroup00" now active
>[  OK  ]
>
>Mounting local filesystems:  [  OK  ]
>
>Enabling local filesystem quotas:  [  OK  ]
>
>
>INIT: Entering runlevel: 3
>
>Entering non-interactive startup
>Starting monitoring for VG VolGroup00:   2 logical volume(s) in volume group "VolGroup00" monitored
>[  OK  ]
>
>Checking for hardware changes [  OK  ]
>
>Bringing up loopback interface:  [  OK  ]
>
>Bringing up interface eth0:  
>Determining IP information for eth0... done.
>[  OK  ]
>
>Starting restorecond: [  OK  ]
>
>Starting system logger: [  OK  ]
>
>Starting kernel logger: [  OK  ]
>
>export BOOT_IMAGE="scsi0:EFI\\redhat\\vmlinuz-2.6.18-83.el5"
>export CONSOLE="/dev/console"
>export HOME="/"
>export INIT_VERSION="sysvinit-2.86"
>export LANG="en_US.UTF-8"
>export OLDPWD
>export PATH="/sbin:/usr/sbin:/bin:/usr/bin"
>export PREVLEVEL="N"
>export PWD="/"
>export RUNLEVEL="3"
>export SELINUX_INIT="YES"
>export SHELL="/bin/sh"
>export SHLVL="2"
>export TERM="linux"
>export elfcorehdr="655248K"
>export max_addr="640M"
>export min_addr="128M"
>export previous="N"
>export runlevel="3"
>export BOOT_IMAGE="scsi0:EFI\\redhat\\vmlinuz-2.6.18-83.el5"
>export CONSOLE="/dev/console"
>export HOME="/"
>export INIT_VERSION="sysvinit-2.86"
>export LANG="en_US.UTF-8"
>export OLDPWD
>export PATH="/sbin:/usr/sbin:/bin:/usr/bin"
>export PREVLEVEL="N"
>export PWD="/"
>export RUNLEVEL="3"
>export SELINUX_INIT="YES"
>export SHELL="/bin/sh"
>export SHLVL="2"
>export TERM="linux"
>export elfcorehdr="655248K"
>export max_addr="640M"
>export min_addr="128M"
>export previous="N"
>export runlevel="3"
>export BOOT_IMAGE="scsi0:EFI\\redhat\\vmlinuz-2.6.18-83.el5"
>export CONSOLE="/dev/console"
>export HOME="/"
>export INIT_VERSION="sysvinit-2.86"
>export LANG="en_US.UTF-8"
>export OLDPWD
>export PATH="/sbin:/usr/sbin:/bin:/usr/bin"
>export PREVLEVEL="N"
>export PWD="/"
>export RUNLEVEL="3"
>export SELINUX_INIT="YES"
>export SHELL="/bin/sh"
>export SHLVL="2"
>export TERM="linux"
>export elfcorehdr="655248K"
>export max_addr="640M"
>export min_addr="128M"
>export previous="N"
>export runlevel="3"
>Starting irqbalance: [  OK  ]
>
>Starting mcstransd: [  OK  ]
>
>Starting portmap: [  OK  ]
>
>Starting NFS statd: [  OK  ]
>
>Starting mdmonitor: [  OK  ]
>
>Starting RPC idmapd: [  OK  ]
>
>Detected change(s) the following file(s):
>  
>  /etc/kdump.conf
>Rebuilding /boot/efi/efi/redhat/initrd-2.6.18-83.el5kdump.img
>Starting kdump:[FAILED]
>

Actions: View

Attachments on bug 434927: 295894 | 295895 | 295896 | 295897 | 296408 | 296597 | 296598 | 296798 | 299065 | 299094