Attachment 297037 Details for Bug 436285 – log before iwlist scan

log before iwlist scan

noload-rt73.log (text/plain), 3.85 KB, created by Lubomir Kundrak on 2008-03-06 11:50:12 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Lubomir Kundrak

Created: 2008-03-06 11:50:12 UTC

Size: 3.85 KB

patch

obsolete

>usb 1-3: new high speed USB device using ehci_hcd and address 10
>usb 1-3: configuration #1 chosen from 1 choice
>rt73: idVendor = 0x148f, idProduct = 0x2573 
>rt73: usb device name wlan0
>rt73: BulkOutMaxPacketSize  512
>rt73: rt73_get_ether_stats --->
>rt73: --> LoadFirmware 
>rt73: 2048 bytes written to device.
>rt73: <-- LoadFirmware (status: 0, loaded: 2048)
>rt73: --> PortCfgInit
>rt73: <-- PortCfgInit
>rt73: --> RTMPInitAdapterBlock
>rt73: <-- RTMPInitAdapterBlock
>rt73: --> NICInitTransmit
>rt73: --> NICInitRecv
>rt73: <-- NICInitRecv
>rt73: --> MlmeInit
>rt73: ==> MlmeInitMemoryHandler
>rt73: <== MlmeInitMemoryHandler Status=0
>rt73: <-- MlmeInit
>rt73: --> NICInitializeAsic
>rt73: BBP version = 22
>rt73: <-- NICInitializeAsic
>rt73: --> NICReadEEPROMParameters
>rt73: - Local MAC = 00:0e:2e:c4:2b:0c
>rt73: E2PROM: Version = 1, FAE release #3
>rt73: Tx power for channel 1 : 0x0c
>rt73: Tx power for channel 2 : 0x0c
>rt73: Tx power for channel 3 : 0x0c
>rt73: Tx power for channel 4 : 0x0c
>rt73: Tx power for channel 5 : 0x0c
>rt73: Tx power for channel 6 : 0x08
>rt73: Tx power for channel 7 : 0x08
>rt73: Tx power for channel 8 : 0x08
>rt73: Tx power for channel 9 : 0x08
>rt73: Tx power for channel 10 : 0x08
>rt73: Tx power for channel 11 : 0x08
>rt73: Tx power for channel 12 : 0x08
>rt73: Tx power for channel 13 : 0x05
>rt73: Tx power for channel 14 : 0x05
>rt73: Tx power for channel 36 : 0xff
>rt73: Tx power for channel 40 : 0xff
>rt73: Tx power for channel 44 : 0xff
>rt73: Tx power for channel 48 : 0xff
>rt73: Tx power for channel 52 : 0xff
>rt73: Tx power for channel 56 : 0xff
>rt73: Tx power for channel 60 : 0xff
>rt73: Tx power for channel 64 : 0xff
>rt73: Tx power for channel 100 : 0xff
>rt73: Tx power for channel 104 : 0xff
>rt73: Tx power for channel 108 : 0xff
>rt73: Tx power for channel 112 : 0xff
>rt73: Tx power for channel 116 : 0xff
>rt73: Tx power for channel 120 : 0xff
>rt73: Tx power for channel 124 : 0xff
>rt73: Tx power for channel 128 : 0xff
>rt73: Tx power for channel 132 : 0xff
>rt73: Tx power for channel 136 : 0xff
>rt73: Tx power for channel 140 : 0xff
>rt73: Tx power for channel 149 : 0xff
>rt73: Tx power for channel 153 : 0xff
>rt73: Tx power for channel 157 : 0xff
>rt73: Tx power for channel 161 : 0xff
>rt73: Tx power for channel 165 : 0xff
>rt73: Tx power for channel 34 : ffffffff
>rt73: Tx power for channel 38 : ffffffff
>rt73: Tx power for channel 42 : ffffffff
>rt73: Tx power for channel 46 : ffffffff
>rt73: E2PROM: G Tssi[-4 .. +4] = 255 255 255 255 - 255 -255 255 255 255, step=255, tuning=0
>rt73: E2PROM: A Tssi[-4 .. +4] = 255 255 255 255 - 255 -255 255 255 255, step=255, tuning=0
>rt73: E2PROM: RF freq offset=0x10
>rt73: <-- NICReadEEPROMParameters
>rt73: --> NICInitAsicFromEEPROM
>rt73: pAd->RfIcType = 2
>rt73: Use Hw Radio Control Pin=0; if used Pin=0;
>rt73: RFIC=2, LED mode=0
>rt73: <-- NICInitAsicFromEEPROM
>rt73: Interface up for first time, activating permanent MAC
>rt73: Active MAC is: 00:0e:2e:c4:2b:0c.
>rt73: Local MAC = 00:0e:2e:c4:2b:0c
>rt73: - RTUSBWriteHWMACAddress: Local MAC = 00:0e:2e:c4:2b:0c
>rt73: RTMPSetPhyMode(=0)
>rt73: country code=129/129, RFIC=2, PHY mode=0, support 13 channels
>rt73: channel # 1 2 3 4 5 6 7 8 9 10 11 12 13
>rt73: Exptected ACK rate[1] = 1 Mbps
>rt73: Exptected ACK rate[2] = 2 Mbps
>rt73: Exptected ACK rate[5] = 5 Mbps
>rt73: Exptected ACK rate[11] = 11 Mbps
>rt73: Exptected ACK rate[6] = 6 Mbps
>rt73: Exptected ACK rate[9] = 6 Mbps
>rt73: Exptected ACK rate[12] = 12 Mbps
>rt73: Exptected ACK rate[18] = 12 Mbps
>rt73: Exptected ACK rate[24] = 24 Mbps
>rt73: Exptected ACK rate[36] = 24 Mbps
>rt73: Exptected ACK rate[48] = 24 Mbps
>rt73: Exptected ACK rate[54] = 24 Mbps
>rt73:  MlmeUpdateTxRates (MaxDesire=54, MaxSupport=54, MaxTxRate=54, Rate Switching =1)
>rt73:  MlmeUpdateTxRates (TxRate=54, RtsRate=2, BasicRateBitmap=0x015f)
>rt73: AsicSetSlotTime(=9 us)
>rt73: --> MlmeThread (2.6)
>rt73: <-- common_probe: Status = 0
>rt73: <-- usb_rtusb_probe: res=0
>rt73: --> RTUSBCmdThread (2.6)

Actions: View

Attachments on bug 436285: 297034 | 297037