Attachment 297297 Details for Bug 436615 – logs and other information

logs and other information

bug.log (text/plain), 130.67 KB, created by Daniel Basabe on 2008-03-08 12:10:28 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Daniel Basabe

Created: 2008-03-08 12:10:28 UTC

Size: 130.67 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.24.3-12.fc8 (mockbuild@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Tue Feb 26 14:21:30 EST 2008
>Command line: ro root=/dev/Volume00/raiz rhgb quiet 
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)
> BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS)
> BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 261872) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.3 present.
>ACPI: RSDP 000F7C10, 0014 (r0 K8T890)
>ACPI: RSDT 3FEF3040, 0030 (r1 K8T890 AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP 3FEF30C0, 0074 (r1 K8T890 AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT 3FEF3180, 6A44 (r1 K8T890 AWRDACPI     1000 MSFT  100000E)
>ACPI: FACS 3FEF0000, 0040
>ACPI: MCFG 3FEF9D00, 003C (r1 K8T890 AWRDACPI 42302E31 AWRD        0)
>ACPI: APIC 3FEF9C40, 0066 (r1 K8T890 AWRDACPI 42302E31 AWRD        0)
>Scanning NUMA topology in Northbridge 24
>CPU has 1 num_cores
>No NUMA configuration found
>Faking a node at 0000000000000000-000000003fef0000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 261872) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000003fef0000
> [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
> [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
> [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
> [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
> [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
> [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
> [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   261872
>On node 0 totalpages: 261775
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1325 pages reserved
>  DMA zone: 2618 pages, LIFO batch:0
>  DMA32 zone: 3524 pages used for memmap
>  DMA32 zone: 254252 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
>IOAPIC[1]: apic_id 3, address 0xfecc0000, GSI 24-47
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 40000000 (gap: 3ff00000:a0100000)
>SMP: Allowing 1 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 42248 bytes of per cpu data
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 256870
>Policy zone: DMA32
>Kernel command line: ro root=/dev/Volume00/raiz rhgb quiet 
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC calibrated against PM_TIMER
>time.c: Detected 2043.091 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Checking aperture...
>CPU 0: aperture @ d0000000 size 128 MB
>Memory: 1023296k/1047488k available (2492k kernel code, 23804k reserved, 1390k data, 332k init)
>SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 4089.15 BogoMIPS (lpj=2044575)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0/0 -> Node 0
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 28k freed
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>APIC timer calibration result 12769338
>Detected 12.769 MHz APIC timer.
>Brought up 1 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=224 bytes
>sizeof(task_struct)=2224 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000000,00000001
>  groups: 00000000,00000001
>net_namespace: 120 bytes
>Time: 11:21:59  Date: 03/08/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXG._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 *10 11 12)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *5
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *5
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 *11 12)
>ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
>ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
>ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
>ACPI: PCI Interrupt Link [ALKD] (IRQs *23), disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0
>PCI: Cannot allocate resource region 8 of bridge 0000:00:03.1
>PCI: Cannot allocate resource region 8 of bridge 0000:00:03.2
>PCI: Cannot allocate resource region 8 of bridge 0000:00:03.3
>PCI: Cannot allocate resource region 0 of device 0000:00:00.0
>PCI: Cannot allocate resource region 3 of device 0000:02:00.0
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>DMAR:No DMAR devices found
>agpgart: Detected AGP bridge 0
>agpgart: AGP aperture is 128M @ 0xd0000000
>Time: tsc clocksource has been installed.
>system 00:01: ioport range 0x4000-0x407f has been reserved
>system 00:01: ioport range 0x5000-0x500f has been reserved
>system 00:02: ioport range 0xb78-0xb7b has been reserved
>system 00:02: ioport range 0xf78-0xf7b has been reserved
>system 00:02: ioport range 0xa78-0xa7b has been reserved
>system 00:02: ioport range 0xe78-0xe7b has been reserved
>system 00:02: ioport range 0xbbc-0xbbf has been reserved
>system 00:02: ioport range 0xfbc-0xfbf has been reserved
>system 00:02: ioport range 0x4d0-0x4d1 has been reserved
>system 00:02: ioport range 0x290-0x297 has been reserved
>system 00:0a: iomem range 0x20000000-0x2fffffff could not be reserved
>system 00:0b: iomem range 0xd0000-0xd3fff has been reserved
>system 00:0b: iomem range 0xf0000-0xf7fff could not be reserved
>system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
>system 00:0b: iomem range 0xfc000-0xfffff could not be reserved
>system 00:0b: iomem range 0x3ff00000-0x3fffffff has been reserved
>system 00:0b: iomem range 0x3fef0000-0x3fefffff could not be reserved
>system 00:0b: iomem range 0xffff0000-0xffffffff could not be reserved
>system 00:0b: iomem range 0x0-0x9ffff could not be reserved
>system 00:0b: iomem range 0x100000-0x3feeffff could not be reserved
>system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
>system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
>system 00:0b: iomem range 0xfff80000-0xfffeffff has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: a000-afff
>  MEM window: df900000-df9fffff
>  PREFETCH window: df800000-df8fffff
>PCI: Failed to allocate mem resource #3:2000000@de000000 for 0000:02:00.0
>PCI: Bridge: 0000:00:02.0
>  IO window: 9000-9fff
>  MEM window: dd000000-deffffff
>  PREFETCH window: b0000000-cfffffff
>PCI: Bridge: 0000:00:03.0
>  IO window: 8000-8fff
>  MEM window: disabled.
>  PREFETCH window: df600000-df6fffff
>PCI: Bridge: 0000:00:03.1
>  IO window: d000-dfff
>  MEM window: disabled.
>  PREFETCH window: dfe00000-dfefffff
>PCI: Bridge: 0000:00:03.2
>  IO window: c000-cfff
>  MEM window: disabled.
>  PREFETCH window: dfc00000-dfcfffff
>PCI: Bridge: 0000:00:03.3
>  IO window: b000-bfff
>  MEM window: disabled.
>  PREFETCH window: dfa00000-dfafffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 27
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PCI: Enabling device 0000:00:03.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 31
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>PCI: Enabling device 0000:00:03.1 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 35 (level, low) -> IRQ 35
>PCI: Setting latency timer of device 0000:00:03.1 to 64
>PCI: Enabling device 0000:00:03.2 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 39 (level, low) -> IRQ 39
>PCI: Setting latency timer of device 0000:00:03.2 to 64
>PCI: Enabling device 0000:00:03.3 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 43 (level, low) -> IRQ 43
>PCI: Setting latency timer of device 0000:00:03.3 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3917k freed
>audit: initializing netlink socket (disabled)
>audit(1204975319.494:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 224A23E13247065A
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: VIA PCI bridge detected. Disabling DAC.
>Boot video device is 0000:02:00.0
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.0:pcie00]
>PCI: Setting latency timer of device 0000:00:03.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.1:pcie00]
>PCI: Setting latency timer of device 0000:00:03.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.2:pcie00]
>PCI: Setting latency timer of device 0000:00:03.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.3:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>Switched to high resolution mode on CPU 0
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (1 cpu cores) (version 2.20.00)
>powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x6
>powernow-k8:    1 : fid 0xa (1800 MHz), vid 0x8
>powernow-k8:    2 : fid 0x2 (1000 MHz), vid 0x12
>registered taskstats version 1
>  Magic number: 0:569:377
>  hash matches device PNP0700:00
>Freeing unused kernel memory: 332k freed
>Write protecting the kernel read-only data: 1080k
>ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
>ehci_hcd 0000:00:10.4: EHCI Host Controller
>ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:10.4: irq 21, io mem 0xdfffc000
>ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.0: UHCI Host Controller
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:10.0: irq 21, io base 0x0000f300
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.1: UHCI Host Controller
>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:10.1: irq 21, io base 0x0000f200
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.2: UHCI Host Controller
>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:10.2: irq 21, io base 0x0000f100
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.3: UHCI Host Controller
>uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:10.3: irq 21, io base 0x0000f000
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 1-4: new high speed USB device using ehci_hcd and address 3
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 20
>ACPI: PCI interrupt for device 0000:00:0f.1 disabled
>usb 1-4: configuration #1 chosen from 1 choice
>usb 2-2: new low speed USB device using uhci_hcd and address 2
>usb 2-2: configuration #1 chosen from 1 choice
>input: KYE Systems Corp. Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input1
>input,hidraw0: USB HID v1.10 Keyboard [KYE Systems Corp. Wireless Keyboard & Mouse] on usb-0000:00:10.0-2
>input: KYE Systems Corp. Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.1/input/input2
>input,hidraw1: USB HID v1.10 Mouse [KYE Systems Corp. Wireless Keyboard & Mouse] on usb-0000:00:10.0-2
>usb 4-2: new low speed USB device using uhci_hcd and address 2
>usb 4-2: configuration #1 chosen from 1 choice
>input: Genius NetScroll + Mini Traveler as /devices/pci0000:00/0000:00:10.2/usb4/4-2/4-2:1.0/input/input3
>input,hidraw2: USB HID v1.10 Mouse [Genius NetScroll + Mini Traveler] on usb-0000:00:10.2-2
>pata_via 0000:00:0f.1: version 0.3.3
>ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 20
>scsi0 : pata_via
>scsi1 : pata_via
>ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14
>ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15
>ata1.00: ATA-6: ST3200822A, 3.01, max UDMA/100
>ata1.00: 390721968 sectors, multi 1: LBA48 
>ata1.00: configured for UDMA/100
>ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4163B, A102, max UDMA/33
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      ST3200822A       3.01 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4163B A102 PQ: 0 ANSI: 5
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
>sata_via 0000:00:0c.0: version 2.3
>ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 20 (level, low) -> IRQ 20
>sata_via 0000:00:0c.0: routed to hard irq line 10
>scsi2 : sata_via
>scsi3 : sata_via
>scsi4 : sata_via
>ata3: SATA max UDMA/133 port i16@0xfe00 bmdma 0xfa00 irq 20
>ata4: SATA max UDMA/133 port i16@0xfd00 bmdma 0xfa08 irq 20
>ata5: PATA max UDMA/133 port i16@0xfc00 bmdma 0xfa10 irq 20
>ata3: SATA link down (SStatus 0 SControl 310)
>ata4: SATA link down (SStatus 0 SControl 310)
>ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 20
>sata_via 0000:00:0f.0: routed to hard irq line 11
>scsi5 : sata_via
>scsi6 : sata_via
>ata6: SATA max UDMA/133 cmd 0xf900 ctl 0xf800 bmdma 0xf500 irq 20
>ata7: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf508 irq 20
>ata6: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
>ata7: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1204975332.323:2): selinux=0 auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>input: Power Button (FF) as /devices/virtual/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/virtual/input/input5
>ACPI: Power Button (CM) [PWRB]
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 22 (level, low) -> IRQ 22
>0000:00:0e.0: IC PLUS IP1000 1000/100/10 based NIC
>PCI: Disallowing DAC for device 0000:00:0e.0
>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>Ethernet device registered as: eth0
>8139cp 0000:00:09.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
>8139cp 0000:00:09.0: Try the "8139too" driver instead.
>ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 21 (level, low) -> IRQ 21
>8139too Fast Ethernet driver 0.9.28
>firewire_ohci: Added fw-ohci device 0000:00:07.0, OHCI version 1.0
>ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 17
>eth1: RealTek RTL8139 at 0xffffc200001fc000, 00:80:5a:28:29:24, IRQ 17
>eth1:  Identified 8139 chip type 'RTL-8100B/8139D'
>input: PC Speaker as /devices/platform/pcspkr/input/input6
>firewire_core: created device fw0: GUID 00508d0000d27f1a, S400
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>phy0: Selected rate control algorithm 'pid'
>parport_pc 00:09: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
>Registered led device: rt2500usb-phy0:radio
>usbcore: registered new interface driver rt2500usb
>ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:11.5 to 64
>device-mapper: multipath: version 1.0.5 loaded
>loop: module loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>fuse init (API version 7.9)
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 24 (level, low) -> IRQ 24
>Adding 1048568k swap on /dev/mapper/Volume00-swap.  Priority:-1 extents:1 across:1048568k
>warning: process `kudzu' used the deprecated sysctl system call with 1.23.
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>Marking TSC unstable due to cpufreq changes
>Time: acpi_pm clocksource has been installed.
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>Clocksource tsc unstable (delta = -123591556 ns)
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bridge firewalling registered
>virbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>virbr0: starting userspace STP failed, starting kernel STP
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
>virbr0: no IPv6 routers present
>IPv6 over IPv4 tunneling driver
>sit0: Disabled Privacy Extensions
>eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
>eth1: no IPv6 routers present
>
>
>cat /proc/iomem:
>
>00000000-0009f7ff : System RAM
>0009f800-0009ffff : reserved
>000d0000-000d3fff : pnp 00:0b
>000f0000-000fffff : reserved
>00100000-3feeffff : System RAM
>  00200000-0046f008 : Kernel code
>  0046f009-005ca81f : Kernel data
>  0068b000-00724adf : Kernel bss
>3fef0000-3fef2fff : ACPI Non-volatile Storage
>3fef3000-3fefffff : ACPI Tables
>3ff00000-3fffffff : pnp 00:0b
>40000000-4000ffff : 0000:00:09.0
>40010000-4001ffff : 0000:00:0e.0
>b0000000-cfffffff : PCI Bus #02
>  b0000000-bfffffff : 0000:02:00.0
>  c0000000-c001ffff : 0000:02:00.0
>d0000000-d7ffffff : GART
>  d0000000-d7ffffff : aperture
>dd000000-deffffff : PCI Bus #02
>  dd000000-ddffffff : 0000:02:00.0
>df600000-df6fffff : PCI Bus #03
>df800000-df8fffff : PCI Bus #01
>df900000-df9fffff : PCI Bus #01
>dfa00000-dfafffff : PCI Bus #06
>dfc00000-dfcfffff : PCI Bus #05
>dfe00000-dfefffff : PCI Bus #04
>dfffc000-dfffc0ff : 0000:00:10.4
>  dfffc000-dfffc0ff : ehci_hcd
>dfffd000-dfffd0ff : 0000:00:0e.0
>  dfffd000-dfffd0ff : ipg
>dfffe000-dfffe0ff : 0000:00:09.0
>  dfffe000-dfffe0ff : 8139too
>dffff000-dffff7ff : 0000:00:07.0
>  dffff000-dffff7ff : firewire_ohci
>e0000000-efffffff : reserved
>fec00000-fec00fff : IOAPIC 0
>  fec00000-fec00fff : reserved
>fecc0000-fecc0fff : IOAPIC 1
>fee00000-fee00fff : Local APIC
>fff80000-fffeffff : pnp 00:0b
>ffff0000-ffffffff : reserved
>
>lspci -t:
>
>-[0000:00]-+-00.0
>           +-00.1
>           +-00.2
>           +-00.3
>           +-00.4
>           +-00.5
>           +-00.7
>           +-01.0-[0000:01]--
>           +-02.0-[0000:02]----00.0
>           +-03.0-[0000:03]--
>           +-03.1-[0000:04]--
>           +-03.2-[0000:05]--
>           +-03.3-[0000:06]--
>           +-07.0
>           +-09.0
>           +-0c.0
>           +-0e.0
>           +-0f.0
>           +-0f.1
>           +-10.0
>           +-10.1
>           +-10.2
>           +-10.3
>           +-10.4
>           +-11.0
>           +-11.5
>           +-18.0
>           +-18.1
>           +-18.2
>           \-18.3
>
>
>lspci -vvv -xxx:
>
>00:00.0 Host bridge: VIA Technologies, Inc. K8T890 Host Bridge
>	Subsystem: ABIT Computer Corp. Unknown device 1416
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ INTx-
>	Latency: 8
>	Region 0: Memory at <ignored> (32-bit, prefetchable)
>	Capabilities: [80] AGP version 3.0
>		Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
>		Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [60] HyperTransport: Slave or Primary Interface
>		!!! Possibly incomplete decoding
>		Command: BaseUnitID=0 UnitCnt=3 MastHost- DefDir-
>		Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
>		Link Config 0: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
>		Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0
>		Link Config 1: MLWI=8bit MLWO=8bit LWI=8bit LWO=8bit
>		Revision ID: 1.02
>	Capabilities: [58] HyperTransport: Interrupt Discovery and Configuration
>	Kernel driver in use: agpgart-amd64
>00: 06 11 38 02 06 00 30 a2 00 00 00 06 00 08 80 00
>10: 08 00 00 d0 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 7b 14 16 14
>30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
>40: 7f db 10 b9 00 00 00 00 01 00 1f c4 00 0c 00 01
>50: 01 60 02 00 00 00 00 00 08 00 01 80 03 80 17 00
>60: 08 58 60 00 20 00 11 11 d0 00 00 00 22 06 75 00
>70: 02 00 00 00 00 00 00 00 00 00 00 00 08 00 00 00
>80: 02 50 30 00 07 02 00 1f 00 00 00 00 28 00 00 00
>90: 80 01 00 00 20 0f 01 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 40 00 00 06 08 00 80
>c0: 05 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 08 00 00 98 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>00:00.1 Host bridge: VIA Technologies, Inc. K8T890 Host Bridge
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>00: 06 11 38 12 06 00 00 02 00 00 00 06 00 00 00 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>00:00.2 Host bridge: VIA Technologies, Inc. K8T890 Host Bridge
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>00: 06 11 38 22 06 00 00 02 00 00 00 06 00 00 00 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 13 8e 10 31 30 3c 80 86 7f cf 44 22 34 00 22 40
>b0: 3f 13 00 00 02 00 00 00 00 00 00 00 00 00 00 00
>c0: 20 aa aa 02 50 50 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>00:00.3 Host bridge: VIA Technologies, Inc. K8T890 Host Bridge
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>00: 06 11 38 32 06 00 00 02 00 00 00 06 00 00 00 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>50: 22 22 00 00 00 00 e4 00 00 00 00 00 00 00 00 00
>60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: aa 0f 00 20 00 ff 1d 00 40 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>00:00.4 Host bridge: VIA Technologies, Inc. K8T890 Host Bridge
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>00: 06 11 38 42 06 00 00 02 00 00 00 06 00 00 00 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>40: 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 00 ff 00 00 00 00 00 1f 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 0a 00 00 00 00 00 00 00 00 00
>
>00:00.5 PIC: VIA Technologies, Inc. K8T890 I/O APIC Interrupt Controller (prog-if 20 [IO(X)-APIC])
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>00: 06 11 38 52 06 00 00 00 00 20 00 08 00 00 80 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>40: 8c 00 05 00 00 00 00 00 00 00 00 00 00 00 00 00
>50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>60: 8b 0e 00 00 23 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 85 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>00:00.7 Host bridge: VIA Technologies, Inc. K8T890 Host Bridge
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>00: 06 11 38 72 06 00 00 02 00 00 00 06 00 00 00 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
>40: 64 3b 88 82 82 44 00 30 23 39 88 80 82 44 00 01
>50: 00 00 00 00 00 00 01 40 08 00 01 80 03 80 17 00
>60: 00 aa 0f 20 00 00 00 00 00 00 00 00 00 00 00 00
>70: c2 c8 ee 01 24 0f 50 48 01 00 00 00 7f 00 00 02
>80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 05 02 00 f1 25 46 46 02 8b a5 bb 11 00 00 00 00
>c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 1d 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South] (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>	I/O behind bridge: 0000a000-0000afff
>	Memory behind bridge: df900000-df9fffff
>	Prefetchable memory behind bridge: df800000-df8fffff
>	Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [70] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel modules: shpchp
>00: 06 11 88 b1 07 00 30 02 00 00 04 06 00 00 01 00
>10: 00 00 00 00 00 00 00 00 00 01 01 00 a0 a0 20 02
>20: 90 df 90 df 80 df 80 df 00 00 00 00 00 00 00 00
>30: 00 00 00 00 70 00 00 00 00 00 00 00 00 00 10 00
>40: 11 40 40 44 35 3a 88 b1 00 00 00 00 00 00 00 00
>50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 01 00 02 02 00 00 00 00 00 00 00 00 00 00 00 00
>80: 0e 70 35 00 07 02 00 1f 00 00 00 00 28 00 00 00
>90: 80 00 00 00 00 08 01 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: bf 63 08 00 00 00 00 00 00 00 1f c4 00 04 00 00
>c0: 08 00 0b ff 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>00:02.0 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
>	I/O behind bridge: 00009000-00009fff
>	Memory behind bridge: dd000000-deffffff
>	Prefetchable memory behind bridge: b0000000-cfffffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00
>		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
>			ExtTag- RBE- FLReset-
>		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr+ UncorrErr+ FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
>			ClockPM- Suprise- LLActRep- BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>	Capabilities: [68] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [70] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable+
>		Address: 00000000fee0100c  Data: 4171
>		Masking: 00000001  Pending: 00000000
>	Kernel driver in use: pcieport-driver
>	Kernel modules: shpchp
>00: 06 11 38 a2 07 04 10 00 00 00 04 06 00 00 01 00
>10: 00 00 00 00 00 00 00 00 00 02 02 00 90 90 00 00
>20: 00 dd f0 de 00 b0 f0 cf 00 00 00 00 00 00 00 00
>30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 08 00
>40: 10 68 41 00 c1 0e 00 00 0f 00 13 00 01 0d 00 00
>50: 00 00 01 01 60 00 00 00 00 00 48 00 00 00 00 00
>60: 00 00 00 00 00 00 00 00 01 70 22 c8 00 00 00 00
>70: 05 00 81 01 0c 10 e0 fe 00 00 00 00 71 41 00 00
>80: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 01 04 00 00 30 00 00 00 00 00 00 00 00 00 00 00
>b0: 0c f0 01 80 00 00 03 00 01 00 00 00 00 00 00 00
>c0: 03 00 01 00 44 44 44 44 44 44 44 44 00 00 00 00
>d0: 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 0c 0f 01 8a f8 00 00 00 01 82 f8 00 00 00 00 00
>f0: 00 00 00 06 00 00 00 00 00 00 00 00 00 00 00 00
>
>00:03.0 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
>	I/O behind bridge: 00008000-00008fff
>	Memory behind bridge: fff00000-000fffff
>	Prefetchable memory behind bridge: df600000-df6fffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00
>		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 unlimited
>			ExtTag- RBE- FLReset-
>		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 256 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #1, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <64ns, L1 <1us
>			ClockPM- Suprise- LLActRep- BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>	Capabilities: [68] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [70] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable+
>		Address: 00000000fee0100c  Data: 4179
>		Masking: 00000001  Pending: 00000000
>	Kernel driver in use: pcieport-driver
>	Kernel modules: shpchp
>00: 06 11 38 c2 07 04 10 00 00 00 04 06 00 00 81 00
>10: 00 00 00 00 00 00 00 00 00 03 03 00 80 80 00 00
>20: f0 ff 00 00 60 df 60 df 00 00 00 00 00 00 00 00
>30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 00 00
>40: 10 68 41 00 01 0e 00 00 2f 00 10 00 41 0c 00 01
>50: 00 00 01 00 60 00 00 00 00 00 48 00 00 00 00 00
>60: 00 00 00 00 00 00 00 00 01 70 22 c8 00 00 00 00
>70: 05 00 81 01 0c 10 e0 fe 00 00 00 00 79 41 00 00
>80: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 01 04 00 00 30 00 00 00 00 00 00 00 00 00 00 00
>b0: 3b f0 41 80 00 00 03 00 00 00 00 00 00 00 00 00
>c0: 03 40 01 00 44 44 00 00 00 00 00 00 00 00 00 00
>d0: 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 0b 01 8a f8 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 06 00 00 00 00 00 00 00 00 00 00 00 00
>
>00:03.1 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
>	I/O behind bridge: 0000d000-0000dfff
>	Memory behind bridge: fff00000-000fffff
>	Prefetchable memory behind bridge: dfe00000-dfefffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00
>		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 unlimited
>			ExtTag- RBE- FLReset-
>		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 256 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us
>			ClockPM- Suprise- LLActRep- BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>	Capabilities: [68] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [70] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable+
>		Address: 00000000fee0100c  Data: 4181
>		Masking: 00000001  Pending: 00000000
>	Kernel driver in use: pcieport-driver
>	Kernel modules: shpchp
>00: 06 11 38 d2 07 04 10 00 00 00 04 06 00 00 81 00
>10: 00 00 00 00 00 00 00 00 00 04 04 00 d0 d0 00 00
>20: f0 ff 00 00 e0 df e0 df 00 00 00 00 00 00 00 00
>30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 02 00 00
>40: 10 68 41 00 01 0e 00 00 2f 00 10 00 11 0c 00 02
>50: 00 00 01 00 60 00 00 00 00 00 48 00 00 00 00 00
>60: 00 00 00 00 00 00 00 00 01 70 22 c8 00 00 00 00
>70: 05 00 81 01 0c 10 e0 fe 00 00 00 00 81 41 00 00
>80: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 01 04 00 00 30 00 00 00 00 00 00 00 00 00 00 00
>b0: 3b f0 41 80 00 00 03 00 00 00 00 00 00 00 00 00
>c0: 00 00 00 00 04 00 00 00 00 00 00 00 00 00 00 00
>d0: 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 0b 00 02 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>00:03.2 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
>	I/O behind bridge: 0000c000-0000cfff
>	Memory behind bridge: fff00000-000fffff
>	Prefetchable memory behind bridge: dfc00000-dfcfffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00
>		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 unlimited
>			ExtTag- RBE- FLReset-
>		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 256 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us
>			ClockPM- Suprise- LLActRep- BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>	Capabilities: [68] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [70] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable+
>		Address: 00000000fee0100c  Data: 4189
>		Masking: 00000001  Pending: 00000000
>	Kernel driver in use: pcieport-driver
>	Kernel modules: shpchp
>00: 06 11 38 e2 07 04 10 00 00 00 04 06 00 00 81 00
>10: 00 00 00 00 00 00 00 00 00 05 05 00 c0 c0 00 00
>20: f0 ff 00 00 c0 df c0 df 00 00 00 00 00 00 00 00
>30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 03 00 00
>40: 10 68 41 00 01 0e 00 00 2f 00 10 00 11 0c 00 03
>50: 00 00 01 00 60 00 00 00 00 00 48 00 00 00 00 00
>60: 00 00 00 00 00 00 00 00 01 70 22 c8 00 00 00 00
>70: 05 00 81 01 0c 10 e0 fe 00 00 00 00 89 41 00 00
>80: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 01 04 00 00 30 00 00 00 00 00 00 00 00 00 00 00
>b0: 3b f0 41 80 00 00 03 00 00 00 00 00 00 00 00 00
>c0: 00 00 00 00 04 00 00 00 00 00 00 00 00 00 00 00
>d0: 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 0b 00 02 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>00:03.3 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
>	I/O behind bridge: 0000b000-0000bfff
>	Memory behind bridge: fff00000-000fffff
>	Prefetchable memory behind bridge: dfa00000-dfafffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00
>		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 unlimited
>			ExtTag- RBE- FLReset-
>		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us
>			ClockPM- Suprise- LLActRep- BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>	Capabilities: [68] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [70] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable+
>		Address: 00000000fee0100c  Data: 4191
>		Masking: 00000001  Pending: 00000000
>	Kernel driver in use: pcieport-driver
>	Kernel modules: shpchp
>00: 06 11 38 f2 07 04 10 00 00 00 04 06 00 00 81 00
>10: 00 00 00 00 00 00 00 00 00 06 06 00 b0 b0 00 00
>20: f0 ff 00 00 a0 df a0 df 00 00 00 00 00 00 00 00
>30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 04 00 00
>40: 10 68 41 00 01 0e 00 00 0f 00 10 00 11 0c 00 04
>50: 00 00 01 00 60 00 00 00 00 00 48 00 00 00 00 00
>60: 00 00 00 00 00 00 00 00 01 70 22 c8 00 00 00 00
>70: 05 00 81 01 0c 10 e0 fe 00 00 00 00 91 41 00 00
>80: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 01 04 00 00 30 00 00 00 00 00 00 00 00 00 00 00
>b0: 3b f0 41 80 00 00 03 00 00 00 00 00 00 00 00 00
>c0: 00 00 00 00 04 00 00 00 00 00 00 00 00 00 00 00
>d0: 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 0b 00 02 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>00:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46) (prog-if 10 [OHCI])
>	Subsystem: ABIT Computer Corp. Unknown device 1416
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32 (8000ns max), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 21
>	Region 0: Memory at dffff000 (32-bit, non-prefetchable) [size=2K]
>	Region 1: I/O ports at ff00 [size=128]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: firewire_ohci
>	Kernel modules: firewire-ohci
>00: 06 11 44 30 87 00 10 02 46 10 00 0c 08 20 00 00
>10: 00 f0 ff df 01 ff 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 7b 14 16 14
>30: 00 00 00 00 50 00 00 00 00 00 00 00 05 01 00 20
>40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>50: 01 00 02 e4 00 00 00 00 00 00 00 00 00 00 00 00
>60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
>	Subsystem: Realtek Semiconductor Co., Ltd. RT8139
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32 (8000ns min, 16000ns max)
>	Interrupt: pin A routed to IRQ 17
>	Region 0: I/O ports at ee00 [size=256]
>	Region 1: Memory at dfffe000 (32-bit, non-prefetchable) [size=256]
>	[virtual] Expansion ROM at 40000000 [disabled] [size=64K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: 8139too
>	Kernel modules: 8139too, 8139cp
>00: ec 10 39 81 07 00 90 02 10 00 00 02 00 20 00 00
>10: 01 ee 00 00 00 e0 ff df 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 ec 10 39 81
>30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 20 40
>40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>50: 01 00 c2 f7 00 00 00 00 00 00 00 00 00 00 00 00
>60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>00:0c.0 RAID bus controller: VIA Technologies, Inc. VT6421 IDE RAID Controller (rev 50)
>	Subsystem: ABIT Computer Corp. Unknown device 1416
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32
>	Interrupt: pin A routed to IRQ 20
>	Region 0: I/O ports at fe00 [size=16]
>	Region 1: I/O ports at fd00 [size=16]
>	Region 2: I/O ports at fc00 [size=16]
>	Region 3: I/O ports at fb00 [size=16]
>	Region 4: I/O ports at fa00 [size=32]
>	Region 5: I/O ports at ec00 [size=256]
>	Capabilities: [e0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: sata_via
>	Kernel modules: sata_via
>00: 06 11 49 32 05 00 90 02 50 00 04 01 00 20 00 00
>10: 01 fe 00 00 01 fd 00 00 01 fc 00 00 01 fb 00 00
>20: 01 fa 00 00 01 ec 00 00 00 00 00 00 7b 14 16 14
>30: 00 00 00 00 e0 00 00 00 00 00 00 00 0a 01 00 00
>40: 13 03 f1 44 0e af 00 00 00 00 00 03 00 00 00 00
>50: 00 00 00 00 00 00 00 00 00 10 10 00 05 00 20 00
>60: 00 00 ff ff 00 00 00 00 00 00 00 00 00 00 ff ff
>70: 00 00 00 00 01 f0 00 00 01 00 01 00 11 00 00 00
>80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 0b f2 c9 35 10 ac c0 00 a8 a8 a8 a8 ff 00 b6 b6
>b0: 0f 0f 0f 0f 34 00 00 00 00 00 20 00 00 00 00 00
>c0: 00 02 00 00 00 00 00 00 00 02 00 00 00 00 00 00
>d0: 02 01 00 00 00 00 00 00 02 01 00 00 00 00 00 00
>e0: 01 00 02 00 00 00 00 00 50 01 49 32 7b 14 16 14
>f0: 00 00 70 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>00:0e.0 Ethernet controller: Sundance Technology Inc / IC Plus Corp IP1000 Family Gigabit Ethernet (rev 41)
>	Subsystem: ABIT Computer Corp. Unknown device 1416
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32 (20000ns min, 2500ns max), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 22
>	Region 0: I/O ports at e800 [size=256]
>	Region 1: Memory at dfffd000 (32-bit, non-prefetchable) [size=256]
>	[virtual] Expansion ROM at 40010000 [disabled] [size=64K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable+ DSel=0 DScale=2 PME-
>	Kernel driver in use: Sundance Technology IPG Triple-Speed Ethernet
>	Kernel modules: ipg
>00: f0 13 23 10 07 00 30 02 41 00 00 02 08 20 00 00
>10: 01 e8 00 00 00 d0 ff df 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 7b 14 16 14
>30: 00 00 00 00 50 00 00 00 00 00 00 00 05 01 50 0a
>40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>50: 01 00 02 f6 00 41 00 40 00 00 00 00 00 00 00 00
>60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
>	Subsystem: ABIT Computer Corp. Unknown device 1416
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32
>	Interrupt: pin B routed to IRQ 20
>	Region 0: I/O ports at f900 [size=8]
>	Region 1: I/O ports at f800 [size=4]
>	Region 2: I/O ports at f700 [size=8]
>	Region 3: I/O ports at f600 [size=4]
>	Region 4: I/O ports at f500 [size=16]
>	Region 5: I/O ports at ea00 [size=256]
>	Capabilities: [c0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: sata_via
>	Kernel modules: sata_via
>00: 06 11 49 31 07 00 90 02 80 00 04 01 00 20 80 00
>10: 01 f9 00 00 01 f8 00 00 01 f7 00 00 01 f6 00 00
>20: 01 f5 00 00 01 ea 00 00 00 00 00 00 7b 14 16 14
>30: 00 00 00 00 c0 00 00 00 00 00 00 00 0b 02 00 00
>40: 33 03 f1 44 0e af 00 00 00 82 25 03 00 00 00 00
>50: 00 00 00 00 00 00 00 00 00 10 10 00 05 00 10 00
>60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 01 00 01 00 11 00 00 00
>80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 80 02 49 31 7b 14 16 14 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
>	Subsystem: ABIT Computer Corp. Unknown device 1416
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32
>	Interrupt: pin A routed to IRQ 20
>	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
>	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
>	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
>	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
>	Region 4: I/O ports at f400 [size=16]
>	Capabilities: [c0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: pata_via
>	Kernel modules: pata_via, ata_generic, pata_acpi
>00: 06 11 71 05 07 00 90 02 06 8a 01 01 00 20 00 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 01 f4 00 00 00 00 00 00 00 00 00 00 7b 14 16 14
>30: 00 00 00 00 c0 00 00 00 00 00 00 00 ff 01 00 00
>40: 3b f2 09 05 18 8c c0 00 99 20 99 20 ff 00 20 20
>50: 17 f6 17 f1 0c 00 00 00 a8 a8 a8 a8 00 00 00 00
>60: 00 02 00 00 00 00 00 00 00 02 00 00 00 00 00 00
>70: 02 01 00 00 00 00 00 00 02 01 00 00 00 00 00 00
>80: 00 20 0f 3e 00 00 00 00 00 20 09 3e 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 06 00 71 05 7b 14 16 14 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 09 00 00 00 00 00 00 00 00 00
>
>00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
>	Subsystem: ABIT Computer Corp. Unknown device 1416
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32, Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 21
>	Region 4: I/O ports at f300 [size=32]
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>00: 06 11 38 30 07 00 10 02 81 00 03 0c 08 20 80 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 01 f3 00 00 00 00 00 00 00 00 00 00 7b 14 16 14
>30: 00 00 00 00 80 00 00 00 00 00 00 00 0b 01 00 00
>40: 40 12 03 00 00 00 00 00 00 0b a0 00 00 00 00 00
>50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 01 00 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00
>
>00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
>	Subsystem: ABIT Computer Corp. Unknown device 1416
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32, Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 21
>	Region 4: I/O ports at f200 [size=32]
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>00: 06 11 38 30 07 00 10 02 81 00 03 0c 08 20 80 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 01 f2 00 00 00 00 00 00 00 00 00 00 7b 14 16 14
>30: 00 00 00 00 80 00 00 00 00 00 00 00 0b 01 00 00
>40: 40 12 03 00 00 00 00 00 00 0b a0 00 00 00 00 00
>50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 01 00 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00
>
>00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
>	Subsystem: ABIT Computer Corp. Unknown device 1416
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32, Cache Line Size: 32 bytes
>	Interrupt: pin B routed to IRQ 21
>	Region 4: I/O ports at f100 [size=32]
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>00: 06 11 38 30 07 00 10 02 81 00 03 0c 08 20 80 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 01 f1 00 00 00 00 00 00 00 00 00 00 7b 14 16 14
>30: 00 00 00 00 80 00 00 00 00 00 00 00 0b 02 00 00
>40: 40 12 03 00 00 00 00 00 00 0b a0 00 00 00 00 00
>50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 01 00 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00
>
>00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
>	Subsystem: ABIT Computer Corp. Unknown device 1416
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32, Cache Line Size: 32 bytes
>	Interrupt: pin B routed to IRQ 21
>	Region 4: I/O ports at f000 [size=32]
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>00: 06 11 38 30 07 00 10 02 81 00 03 0c 08 20 80 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 01 f0 00 00 00 00 00 00 00 00 00 00 7b 14 16 14
>30: 00 00 00 00 80 00 00 00 00 00 00 00 0b 02 00 00
>40: 40 12 03 00 00 00 00 00 00 0b a0 00 00 00 00 00
>50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 01 00 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00
>
>00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if 20 [EHCI])
>	Subsystem: ABIT Computer Corp. Unknown device 1416
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32, Cache Line Size: 64 bytes
>	Interrupt: pin C routed to IRQ 21
>	Region 0: Memory at dfffc000 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: ehci_hcd
>	Kernel modules: ehci-hcd
>00: 06 11 04 31 17 00 10 02 86 20 03 0c 10 20 80 00
>10: 00 c0 ff df 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 7b 14 16 14
>30: 00 00 00 00 80 00 00 00 00 00 00 00 0a 03 00 00
>40: 00 00 03 00 00 00 00 00 a8 20 00 09 00 00 00 00
>50: 00 5a 04 80 00 00 00 00 04 0b 88 88 03 88 88 00
>60: 20 20 01 00 00 00 00 00 01 00 00 00 00 00 08 c0
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 01 00 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 88 00 00 00 00 00 00 00 00 00
>
>00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
>	Subsystem: ABIT Computer Corp. Unknown device 1416
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Capabilities: [c0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel modules: i2c-viapro
>00: 06 11 27 32 87 00 10 02 00 00 01 06 00 00 80 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 7b 14 16 14
>30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00
>40: 44 00 f8 00 00 00 10 00 8c 20 00 00 44 00 08 08
>50: 80 88 09 00 00 00 00 00 43 90 00 1b 00 00 00 00
>60: e0 00 00 00 00 0f 04 04 00 00 00 00 00 00 00 00
>70: 7b 14 16 14 00 00 00 00 00 00 00 00 20 00 00 00
>80: 20 84 59 00 f2 30 00 00 01 40 00 00 02 18 00 00
>90: 00 d0 81 88 a0 c1 00 00 00 0c 0f 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 01 50 01 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 45 09 00 00 00 00 00 00 04 00 00 00
>f0: 00 00 00 00 00 00 05 00 00 00 00 00 00 00 00 00
>
>00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
>	Subsystem: ABIT Computer Corp. Unknown device 1416
>	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Interrupt: pin C routed to IRQ 22
>	Region 0: I/O ports at e600 [size=256]
>	Capabilities: [c0] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: VIA 82xx Audio
>	Kernel modules: snd-via82xx
>00: 06 11 59 30 01 00 10 02 60 00 01 04 00 00 00 00
>10: 01 e6 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 7b 14 16 14
>30: 00 00 00 00 c0 00 00 00 00 00 00 00 0a 03 00 00
>40: 01 cc 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 01 00 02 06 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Capabilities: [80] HyperTransport: Host or Secondary Interface
>		!!! Possibly incomplete decoding
>		Command: WarmRst+ DblEnd-
>		Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
>		Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
>		Revision ID: 1.02
>00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
>40: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
>50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
>60: 00 00 00 00 e4 00 00 00 0f cc 00 0f 0c 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 08 00 01 21 20 00 11 11 22 06 75 80 02 00 00 00
>90: 56 04 51 02 00 00 06 00 07 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>40: 03 00 00 00 00 00 3f 00 00 00 00 00 01 00 00 00
>50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00
>60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00
>70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00
>80: 03 0a 00 00 00 0b 00 00 08 36 0d 40 36 b0 bd 43
>90: 03 00 40 00 00 ff df 00 00 8c 23 22 b7 ab ff e9
>a0: 08 7a 24 00 37 3f c9 d3 00 0c 80 01 27 de 6e ff
>b0: 03 00 e0 00 80 6f e0 00 00 1a 02 cc a1 aa 23 ae
>c0: 13 80 00 00 00 f0 00 00 00 90 57 01 37 30 74 01
>d0: 20 f0 e7 01 33 90 45 01 30 c0 a7 01 37 f0 53 01
>e0: 03 00 00 06 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>40: 01 00 00 00 01 10 00 00 00 00 00 00 00 00 00 00
>50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>60: 00 ee e0 03 00 ee e0 03 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 04 00 00 00 00 00 00 00 42 35 82 13 41 0b 00 00
>90: 00 8e 05 38 07 07 7b 3e 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: ee 19 24 f0 51 00 00 00 db b2 00 80 42 2b e3 88
>c0: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: b5 8e ff cc f9 d7 31 7a 47 de af be f7 a7 6f ee
>e0: 11 3d 5c 72 c1 d1 ed a0 09 3c 12 6e 00 4d 06 7f
>f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Kernel driver in use: k8temp
>	Kernel modules: k8temp
>00: 22 10 03 11 00 00 00 00 00 00 00 06 00 00 80 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>40: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00
>50: 68 13 78 54 42 00 00 00 00 00 00 00 80 7d 87 5f
>60: 2d 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 11 01 02 51 11 80 00 50 00 38 00 08 1b 22 00 00
>80: 00 00 07 23 13 21 13 21 00 00 00 00 00 00 00 00
>90: 05 00 00 00 68 00 00 00 00 08 3f 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 3f 00 00 00 00 00 00 00
>c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 01 07 0d 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 20 10 49 10 19 01 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>02:00.0 VGA compatible controller: nVidia Corporation GeForce 8400 GS (rev a1) (prog-if 00 [VGA controller])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 24
>	Region 0: Memory at dd000000 (32-bit, non-prefetchable) [size=16M]
>	Region 1: Memory at b0000000 (64-bit, prefetchable) [size=256M]
>	Region 3: Memory at <ignored> (64-bit, non-prefetchable)
>	Region 5: I/O ports at 9f00 [size=128]
>	[virtual] Expansion ROM at c0000000 [disabled] [size=128K]
>	Capabilities: [60] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [78] Express (v1) Endpoint, MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
>			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>			MaxPayload 128 bytes, MaxReadReq 512 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>		LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s, Latency L0 <512ns, L1 <4us
>			ClockPM- Suprise- LLActRep- BwNot-
>		LnkCtl:	ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk-
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>	Kernel modules: nvidiafb
>00: de 10 22 04 07 00 10 00 a1 00 00 03 08 00 00 00
>10: 00 00 00 dd 0c 00 00 b0 00 00 00 00 04 00 00 dc
>20: 00 00 00 00 01 9f 00 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 60 00 00 00 00 00 00 00 0b 01 00 00
>40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>50: 01 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00
>60: 01 68 02 00 00 00 00 00 05 78 80 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 10 00 01 00 e0 84 00 00
>80: 10 28 00 00 01 35 01 00 08 00 01 11 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>
>
>/var/log/Xorg.0.log:
>
>X Window System Version 1.3.0
>Release Date: 19 April 2007
>X Protocol Version 11, Revision 0, Release 1.3
>Build Operating System: Fedora 8 Red Hat, Inc.
>Current Operating System: Linux ESDA 2.6.23.15-137.fc8 #1 SMP Sun Feb 10 17:03:13 EST 2008 x86_64
>Build Date: 21 January 2008
>Build ID: xorg-x11-server 1.3.0.0-40.fc8 
>	Before reporting problems, check http://wiki.x.org
>	to make sure that you have the latest version.
>Module Loader present
>Markers: (--) probed, (**) from config file, (==) default setting,
>	(++) from command line, (!!) notice, (II) informational,
>	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>(==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar  8 10:59:32 2008
>(==) Using config file: "/etc/X11/xorg.conf"
>(==) ServerLayout "single head configuration"
>(**) |-->Screen "Screen0" (0)
>(**) |   |-->Monitor "<default monitor>"
>(**) |   |-->Device "Videocard0"
>(WW) No monitor specified for screen "Screen0".
>	Using a default monitor configuration.
>(**) |-->Input Device "Keyboard0"
>(==) |-->Input Device "<default pointer>"
>(WW) The core pointer device wasn't specified explicitly in the layout.
>	Using the default mouse configuration.
>(==) FontPath set to:
>	catalogue:/etc/X11/fontpath.d,
>	built-ins
>(==) RgbPath set to "/usr/share/X11/rgb"
>(**) ModulePath set to "/usr/lib64/xorg/modules/extensions/nvidia,/usr/lib64/xorg/modules"
>(II) Open ACPI successful (/var/run/acpid.socket)
>(II) Loader magic: 0x7beee0
>(II) Module ABI versions:
>	X.Org ANSI C Emulation: 0.3
>	X.Org Video Driver: 1.2
>	X.Org XInput driver : 0.7
>	X.Org Server Extension : 0.3
>	X.Org Font Renderer : 0.5
>(II) Loader running on linux
>(II) LoadModule: "pcidata"
>(II) Loading /usr/lib64/xorg/modules//libpcidata.so
>(II) Module pcidata: vendor="X.Org Foundation"
>	compiled for 1.3.0, module version = 1.0.0
>	ABI class: X.Org Video Driver, version 1.2
>(++) using VT number 7
>
>(II) PCI: PCI scan (all values are in hex)
>(II) PCI: 00:00:0: chip 1106,0238 card 147b,1416 rev 00 class 06,00,00 hdr 80
>(II) PCI: 00:00:1: chip 1106,1238 card 0000,0000 rev 00 class 06,00,00 hdr 00
>(II) PCI: 00:00:2: chip 1106,2238 card 0000,0000 rev 00 class 06,00,00 hdr 00
>(II) PCI: 00:00:3: chip 1106,3238 card 0000,0000 rev 00 class 06,00,00 hdr 00
>(II) PCI: 00:00:4: chip 1106,4238 card 0000,0000 rev 00 class 06,00,00 hdr 00
>(II) PCI: 00:00:5: chip 1106,5238 card 0000,0000 rev 00 class 08,00,20 hdr 80
>(II) PCI: 00:00:7: chip 1106,7238 card 0000,0000 rev 00 class 06,00,00 hdr 00
>(II) PCI: 00:01:0: chip 1106,b188 card 0000,0000 rev 00 class 06,04,00 hdr 01
>(II) PCI: 00:02:0: chip 1106,a238 card 0000,0000 rev 00 class 06,04,00 hdr 01
>(II) PCI: 00:03:0: chip 1106,c238 card 0000,0000 rev 00 class 06,04,00 hdr 81
>(II) PCI: 00:03:1: chip 1106,d238 card 0000,0000 rev 00 class 06,04,00 hdr 81
>(II) PCI: 00:03:2: chip 1106,e238 card 0000,0000 rev 00 class 06,04,00 hdr 81
>(II) PCI: 00:03:3: chip 1106,f238 card 0000,0000 rev 00 class 06,04,00 hdr 81
>(II) PCI: 00:07:0: chip 1106,3044 card 147b,1416 rev 46 class 0c,00,10 hdr 00
>(II) PCI: 00:09:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00
>(II) PCI: 00:0c:0: chip 1106,3249 card 147b,1416 rev 50 class 01,04,00 hdr 00
>(II) PCI: 00:0e:0: chip 13f0,1023 card 147b,1416 rev 41 class 02,00,00 hdr 00
>(II) PCI: 00:0f:0: chip 1106,3149 card 147b,1416 rev 80 class 01,04,00 hdr 80
>(II) PCI: 00:0f:1: chip 1106,0571 card 147b,1416 rev 06 class 01,01,8a hdr 00
>(II) PCI: 00:10:0: chip 1106,3038 card 147b,1416 rev 81 class 0c,03,00 hdr 80
>(II) PCI: 00:10:1: chip 1106,3038 card 147b,1416 rev 81 class 0c,03,00 hdr 80
>(II) PCI: 00:10:2: chip 1106,3038 card 147b,1416 rev 81 class 0c,03,00 hdr 80
>(II) PCI: 00:10:3: chip 1106,3038 card 147b,1416 rev 81 class 0c,03,00 hdr 80
>(II) PCI: 00:10:4: chip 1106,3104 card 147b,1416 rev 86 class 0c,03,20 hdr 80
>(II) PCI: 00:11:0: chip 1106,3227 card 147b,1416 rev 00 class 06,01,00 hdr 80
>(II) PCI: 00:11:5: chip 1106,3059 card 147b,1416 rev 60 class 04,01,00 hdr 00
>(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
>(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
>(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
>(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
>(II) PCI: 02:00:0: chip 10de,0422 card 0000,0000 rev a1 class 03,00,00 hdr 00
>(II) PCI: End of PCI scan
>(II) Host-to-PCI bridge:
>(II) Bus 0: bridge is at (0:0:0), (0,0,6), BCTRL: 0x0008 (VGA_EN is set)
>(II) Bus 0 I/O range:
>	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
>(II) Bus 0 non-prefetchable memory range:
>	[0] -1	0	0x00000000 - 0xffffffff (0x100000000) MX[B]
>(II) Bus 0 prefetchable memory range:
>	[0] -1	0	0x00000000 - 0xffffffff (0x100000000) MX[B]
>(II) PCI-to-PCI bridge:
>(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0010 (VGA_EN is cleared)
>(II) Bus 1 I/O range:
>	[0] -1	0	0x0000a000 - 0x0000afff (0x1000) IX[B]
>(II) Bus 1 non-prefetchable memory range:
>	[0] -1	0	0xdf900000 - 0xdf9fffff (0x100000) MX[B]
>(II) Bus 1 prefetchable memory range:
>	[0] -1	0	0xdf800000 - 0xdf8fffff (0x100000) MX[B]
>(II) PCI-to-PCI bridge:
>(II) Bus 2: bridge is at (0:2:0), (0,2,2), BCTRL: 0x0008 (VGA_EN is set)
>(II) Bus 2 I/O range:
>	[0] -1	0	0x00009000 - 0x00009fff (0x1000) IX[B]
>(II) Bus 2 non-prefetchable memory range:
>	[0] -1	0	0xdd000000 - 0xdeffffff (0x2000000) MX[B]
>(II) Bus 2 prefetchable memory range:
>	[0] -1	0	0xb0000000 - 0xcfffffff (0x20000000) MX[B]
>(II) PCI-to-PCI bridge:
>(II) Bus 3: bridge is at (0:3:0), (0,3,3), BCTRL: 0x0000 (VGA_EN is cleared)
>(II) Bus 3 I/O range:
>	[0] -1	0	0x00008000 - 0x00008fff (0x1000) IX[B]
>(II) Bus 3 prefetchable memory range:
>	[0] -1	0	0xdf600000 - 0xdf6fffff (0x100000) MX[B]
>(II) PCI-to-PCI bridge:
>(II) Bus 4: bridge is at (0:3:1), (0,4,4), BCTRL: 0x0000 (VGA_EN is cleared)
>(II) Bus 4 I/O range:
>	[0] -1	0	0x0000d000 - 0x0000dfff (0x1000) IX[B]
>(II) Bus 4 prefetchable memory range:
>	[0] -1	0	0xdfe00000 - 0xdfefffff (0x100000) MX[B]
>(II) PCI-to-PCI bridge:
>(II) Bus 5: bridge is at (0:3:2), (0,5,5), BCTRL: 0x0000 (VGA_EN is cleared)
>(II) Bus 5 I/O range:
>	[0] -1	0	0x0000c000 - 0x0000cfff (0x1000) IX[B]
>(II) Bus 5 prefetchable memory range:
>	[0] -1	0	0xdfc00000 - 0xdfcfffff (0x100000) MX[B]
>(II) PCI-to-PCI bridge:
>(II) Bus 6: bridge is at (0:3:3), (0,6,6), BCTRL: 0x0000 (VGA_EN is cleared)
>(II) Bus 6 I/O range:
>	[0] -1	0	0x0000b000 - 0x0000bfff (0x1000) IX[B]
>(II) Bus 6 prefetchable memory range:
>	[0] -1	0	0xdfa00000 - 0xdfafffff (0x100000) MX[B]
>(II) PCI-to-ISA bridge:
>(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
>(--) PCI:*(2:0:0) nVidia Corporation unknown chipset (0x0422) rev 161, Mem @ 0xdd000000/24, 0xb0000000/28, 0xce000000/0, I/O @ 0x9f00/7
>(II) Addressable bus resource ranges are
>	[0] -1	0	0x00000000 - 0xffffffff (0x100000000) MX[B]
>	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
>(II) OS-reported resource ranges:
>	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
>(II) PCI Memory resource overlap reduced 0xd0000000 from 0xd0000000 to 0xcfffffff
>(II) Active PCI resource ranges:
>	[0] -1	0	0xdfffc000 - 0xdfffc0ff (0x100) MX[B]
>	[1] -1	0	0xdfffd000 - 0xdfffd0ff (0x100) MX[B]
>	[2] -1	0	0xdfffe000 - 0xdfffe0ff (0x100) MX[B]
>	[3] -1	0	0xdffff000 - 0xdffff7ff (0x800) MX[B]
>	[4] -1	0	0xd0000000 - 0xcfffffff (0x0) MX[B]O
>	[5] -1	0	0xce000000 - 0xce000000 (0x1) MX[B](B)
>	[6] -1	0	0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
>	[7] -1	0	0xdd000000 - 0xddffffff (0x1000000) MX[B](B)
>	[8] -1	0	0x0000e600 - 0x0000e6ff (0x100) IX[B]
>	[9] -1	0	0x0000f000 - 0x0000f01f (0x20) IX[B]
>	[10] -1	0	0x0000f100 - 0x0000f11f (0x20) IX[B]
>	[11] -1	0	0x0000f200 - 0x0000f21f (0x20) IX[B]
>	[12] -1	0	0x0000f300 - 0x0000f31f (0x20) IX[B]
>	[13] -1	0	0x0000f400 - 0x0000f40f (0x10) IX[B]
>	[14] -1	0	0x0000ea00 - 0x0000eaff (0x100) IX[B]
>	[15] -1	0	0x0000f500 - 0x0000f50f (0x10) IX[B]
>	[16] -1	0	0x0000f600 - 0x0000f603 (0x4) IX[B]
>	[17] -1	0	0x0000f700 - 0x0000f707 (0x8) IX[B]
>	[18] -1	0	0x0000f800 - 0x0000f803 (0x4) IX[B]
>	[19] -1	0	0x0000f900 - 0x0000f907 (0x8) IX[B]
>	[20] -1	0	0x0000e800 - 0x0000e8ff (0x100) IX[B]
>	[21] -1	0	0x0000ec00 - 0x0000ecff (0x100) IX[B]
>	[22] -1	0	0x0000fa00 - 0x0000fa1f (0x20) IX[B]
>	[23] -1	0	0x0000fb00 - 0x0000fb0f (0x10) IX[B]
>	[24] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
>	[25] -1	0	0x0000fd00 - 0x0000fd0f (0x10) IX[B]
>	[26] -1	0	0x0000fe00 - 0x0000fe0f (0x10) IX[B]
>	[27] -1	0	0x0000ee00 - 0x0000eeff (0x100) IX[B]
>	[28] -1	0	0x0000ff00 - 0x0000ff7f (0x80) IX[B]
>	[29] -1	0	0x00009f00 - 0x00009f7f (0x80) IX[B](B)
>(II) Active PCI resource ranges after removing overlaps:
>	[0] -1	0	0xdfffc000 - 0xdfffc0ff (0x100) MX[B]
>	[1] -1	0	0xdfffd000 - 0xdfffd0ff (0x100) MX[B]
>	[2] -1	0	0xdfffe000 - 0xdfffe0ff (0x100) MX[B]
>	[3] -1	0	0xdffff000 - 0xdffff7ff (0x800) MX[B]
>	[4] -1	0	0xd0000000 - 0xcfffffff (0x0) MX[B]O
>	[5] -1	0	0xce000000 - 0xce000000 (0x1) MX[B](B)
>	[6] -1	0	0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
>	[7] -1	0	0xdd000000 - 0xddffffff (0x1000000) MX[B](B)
>	[8] -1	0	0x0000e600 - 0x0000e6ff (0x100) IX[B]
>	[9] -1	0	0x0000f000 - 0x0000f01f (0x20) IX[B]
>	[10] -1	0	0x0000f100 - 0x0000f11f (0x20) IX[B]
>	[11] -1	0	0x0000f200 - 0x0000f21f (0x20) IX[B]
>	[12] -1	0	0x0000f300 - 0x0000f31f (0x20) IX[B]
>	[13] -1	0	0x0000f400 - 0x0000f40f (0x10) IX[B]
>	[14] -1	0	0x0000ea00 - 0x0000eaff (0x100) IX[B]
>	[15] -1	0	0x0000f500 - 0x0000f50f (0x10) IX[B]
>	[16] -1	0	0x0000f600 - 0x0000f603 (0x4) IX[B]
>	[17] -1	0	0x0000f700 - 0x0000f707 (0x8) IX[B]
>	[18] -1	0	0x0000f800 - 0x0000f803 (0x4) IX[B]
>	[19] -1	0	0x0000f900 - 0x0000f907 (0x8) IX[B]
>	[20] -1	0	0x0000e800 - 0x0000e8ff (0x100) IX[B]
>	[21] -1	0	0x0000ec00 - 0x0000ecff (0x100) IX[B]
>	[22] -1	0	0x0000fa00 - 0x0000fa1f (0x20) IX[B]
>	[23] -1	0	0x0000fb00 - 0x0000fb0f (0x10) IX[B]
>	[24] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
>	[25] -1	0	0x0000fd00 - 0x0000fd0f (0x10) IX[B]
>	[26] -1	0	0x0000fe00 - 0x0000fe0f (0x10) IX[B]
>	[27] -1	0	0x0000ee00 - 0x0000eeff (0x100) IX[B]
>	[28] -1	0	0x0000ff00 - 0x0000ff7f (0x80) IX[B]
>	[29] -1	0	0x00009f00 - 0x00009f7f (0x80) IX[B](B)
>(II) OS-reported resource ranges after removing overlaps with PCI:
>	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
>(II) All system resource ranges:
>	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] -1	0	0xdfffc000 - 0xdfffc0ff (0x100) MX[B]
>	[5] -1	0	0xdfffd000 - 0xdfffd0ff (0x100) MX[B]
>	[6] -1	0	0xdfffe000 - 0xdfffe0ff (0x100) MX[B]
>	[7] -1	0	0xdffff000 - 0xdffff7ff (0x800) MX[B]
>	[8] -1	0	0xd0000000 - 0xcfffffff (0x0) MX[B]O
>	[9] -1	0	0xce000000 - 0xce000000 (0x1) MX[B](B)
>	[10] -1	0	0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
>	[11] -1	0	0xdd000000 - 0xddffffff (0x1000000) MX[B](B)
>	[12] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[13] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
>	[14] -1	0	0x0000e600 - 0x0000e6ff (0x100) IX[B]
>	[15] -1	0	0x0000f000 - 0x0000f01f (0x20) IX[B]
>	[16] -1	0	0x0000f100 - 0x0000f11f (0x20) IX[B]
>	[17] -1	0	0x0000f200 - 0x0000f21f (0x20) IX[B]
>	[18] -1	0	0x0000f300 - 0x0000f31f (0x20) IX[B]
>	[19] -1	0	0x0000f400 - 0x0000f40f (0x10) IX[B]
>	[20] -1	0	0x0000ea00 - 0x0000eaff (0x100) IX[B]
>	[21] -1	0	0x0000f500 - 0x0000f50f (0x10) IX[B]
>	[22] -1	0	0x0000f600 - 0x0000f603 (0x4) IX[B]
>	[23] -1	0	0x0000f700 - 0x0000f707 (0x8) IX[B]
>	[24] -1	0	0x0000f800 - 0x0000f803 (0x4) IX[B]
>	[25] -1	0	0x0000f900 - 0x0000f907 (0x8) IX[B]
>	[26] -1	0	0x0000e800 - 0x0000e8ff (0x100) IX[B]
>	[27] -1	0	0x0000ec00 - 0x0000ecff (0x100) IX[B]
>	[28] -1	0	0x0000fa00 - 0x0000fa1f (0x20) IX[B]
>	[29] -1	0	0x0000fb00 - 0x0000fb0f (0x10) IX[B]
>	[30] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
>	[31] -1	0	0x0000fd00 - 0x0000fd0f (0x10) IX[B]
>	[32] -1	0	0x0000fe00 - 0x0000fe0f (0x10) IX[B]
>	[33] -1	0	0x0000ee00 - 0x0000eeff (0x100) IX[B]
>	[34] -1	0	0x0000ff00 - 0x0000ff7f (0x80) IX[B]
>	[35] -1	0	0x00009f00 - 0x00009f7f (0x80) IX[B](B)
>(II) LoadModule: "glx"
>(II) Loading /usr/lib64/xorg/modules//extensions/libglx.so
>(II) Module glx: vendor="NVIDIA Corporation"
>	compiled for 4.0.2, module version = 1.0.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 0.1
>(II) NVIDIA GLX Module  169.12  Thu Feb 14 18:34:02 PST 2008
>(II) Loading extension GLX
>(II) LoadModule: "xtrap"
>(II) Loading /usr/lib64/xorg/modules//extensions/libxtrap.so
>(II) Module xtrap: vendor="X.Org Foundation"
>	compiled for 1.3.0, module version = 1.0.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 0.3
>(II) Loading extension DEC-XTRAP
>(II) LoadModule: "record"
>(II) Loading /usr/lib64/xorg/modules//extensions/librecord.so
>(II) Module record: vendor="X.Org Foundation"
>	compiled for 1.3.0, module version = 1.13.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 0.3
>(II) Loading extension RECORD
>(II) LoadModule: "dbe"
>(II) Loading /usr/lib64/xorg/modules//extensions/libdbe.so
>(II) Module dbe: vendor="X.Org Foundation"
>	compiled for 1.3.0, module version = 1.0.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 0.3
>(II) Loading extension DOUBLE-BUFFER
>(II) LoadModule: "extmod"
>(II) Loading /usr/lib64/xorg/modules//extensions/libextmod.so
>(II) Module extmod: vendor="X.Org Foundation"
>	compiled for 1.3.0, module version = 1.0.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 0.3
>(II) Loading extension SHAPE
>(II) Loading extension MIT-SUNDRY-NONSTANDARD
>(II) Loading extension BIG-REQUESTS
>(II) Loading extension SYNC
>(II) Loading extension MIT-SCREEN-SAVER
>(II) Loading extension XC-MISC
>(II) Loading extension XFree86-VidModeExtension
>(II) Loading extension XFree86-Misc
>(II) Loading extension XFree86-DGA
>(II) Loading extension DPMS
>(II) Loading extension TOG-CUP
>(II) Loading extension Extended-Visual-Information
>(II) Loading extension XVideo
>(II) Loading extension XVideo-MotionCompensation
>(II) Loading extension X-Resource
>(II) LoadModule: "type1"
>(II) Loading /usr/lib64/xorg/modules//fonts/libtype1.so
>(II) Module type1: vendor="X.Org Foundation"
>	compiled for 1.3.0, module version = 1.0.2
>	Module class: X.Org Font Renderer
>	ABI class: X.Org Font Renderer, version 0.5
>(II) Loading font Type1
>(II) LoadModule: "freetype"
>(II) Loading /usr/lib64/xorg/modules//fonts/libfreetype.so
>(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
>	compiled for 1.3.0, module version = 2.1.0
>	Module class: X.Org Font Renderer
>	ABI class: X.Org Font Renderer, version 0.5
>(II) Loading font FreeType
>(II) LoadModule: "i2c"(II) Module already built-in
>(II) LoadModule: "vbe"
>(II) Loading /usr/lib64/xorg/modules//libvbe.so
>(II) Module vbe: vendor="X.Org Foundation"
>	compiled for 1.3.0, module version = 1.1.0
>	ABI class: X.Org Video Driver, version 1.2
>(II) LoadModule: "nv"
>(II) Loading /usr/lib64/xorg/modules//drivers/nv_drv.so
>(II) Module nv: vendor="X.Org Foundation"
>	compiled for 1.3.0, module version = 2.1.6
>	Module class: X.Org Video Driver
>	ABI class: X.Org Video Driver, version 1.2
>(II) LoadModule: "kbd"
>(II) Loading /usr/lib64/xorg/modules//input/kbd_drv.so
>(II) Module kbd: vendor="X.Org Foundation"
>	compiled for 1.3.0, module version = 1.2.2
>	Module class: X.Org XInput Driver
>	ABI class: X.Org XInput driver, version 0.7
>(II) LoadModule: "mouse"
>(II) Loading /usr/lib64/xorg/modules//input/mouse_drv.so
>(II) Module mouse: vendor="X.Org Foundation"
>	compiled for 1.3.0, module version = 1.2.3
>	Module class: X.Org XInput Driver
>	ABI class: X.Org XInput driver, version 0.7
>(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
>	Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
>	Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
>	GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
>	GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
>	Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
>	GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
>	GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
>	GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
>	GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
>	GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
>	GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
>	Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
>	GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
>	GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
>	GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
>	Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
>	GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
>	Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
>	GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
>	GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
>	GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
>	GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
>	GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
>	GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
>	Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
>	GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
>	GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
>	GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
>	GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
>	GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
>	Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
>	GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
>	GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
>	GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
>	GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
>	Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
>	GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
>	GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
>	GeForce Go 6600, GeForce Go 6600 GT, Quadro FX 550, Quadro FX 550,
>	Quadro FX 540, GeForce 6200, GeForce 6500,
>	GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
>	GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
>	GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 6800,
>	GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT, GeForce 6200,
>	GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
>	GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
>	GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7300 LE,
>	GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300, GeForce Go 7400,
>	GeForce Go 7400 GS, Quadro NVS 110M, Quadro NVS 120M, Quadro FX 350M,
>	GeForce 7500 LE, Quadro FX 350, GeForce 7300 GS, GeForce 7600 GT,
>	GeForce 7600 GS, GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT,
>	GeForce Go 7700, GeForce Go 7600, GeForce Go 7600 GT,
>	Quadro NVS 300M, GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560,
>	GeForce 7900 GTX, GeForce 7900 GT, GeForce 7900 GS,
>	GeForce Go 7900 GS, GeForce Go 7900 GTX, Quadro FX 2500M,
>	Quadro FX 1500M, Quadro FX 5500, Quadro FX 3500, Quadro FX 1500,
>	Quadro FX 4500 X2, GeForce 6150, GeForce 6150 LE, GeForce 6100,
>	GeForce Go 6150, GeForce Go 6100, GeForce 8800 GTX, GeForce 8800 GTS,
>	GeForce 8800 Ultra, Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS,
>	GeForce 8600 GT, GeForce 8400 GS, GeForce 8600M GT, GeForce 8700M GT,
>	Quadro FX 370, Quadro NVS 320M, Quadro FX 570M, Quadro FX 1600M,
>	Quadro FX 570, Quadro FX 1700, GeForce 8500 GT, GeForce 8400 GS,
>	GeForce 8300 GS, GeForce 8600M GS, GeForce 8400M GT,
>	GeForce 8400M GS, GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M,
>	Quadro NVS 135M, Quadro FX 360M, Quadro NVS 290
>(II) Primary Device is: PCI 02:00:0
>(--) Assigning device section with no busID to primary device
>(--) Chipset GeForce 8400 GS found
>(II) resource ranges after xf86ClaimFixedResources() call:
>	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] -1	0	0xdfffc000 - 0xdfffc0ff (0x100) MX[B]
>	[5] -1	0	0xdfffd000 - 0xdfffd0ff (0x100) MX[B]
>	[6] -1	0	0xdfffe000 - 0xdfffe0ff (0x100) MX[B]
>	[7] -1	0	0xdffff000 - 0xdffff7ff (0x800) MX[B]
>	[8] -1	0	0xd0000000 - 0xcfffffff (0x0) MX[B]O
>	[9] -1	0	0xce000000 - 0xce000000 (0x1) MX[B](B)
>	[10] -1	0	0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
>	[11] -1	0	0xdd000000 - 0xddffffff (0x1000000) MX[B](B)
>	[12] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[13] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
>	[14] -1	0	0x0000e600 - 0x0000e6ff (0x100) IX[B]
>	[15] -1	0	0x0000f000 - 0x0000f01f (0x20) IX[B]
>	[16] -1	0	0x0000f100 - 0x0000f11f (0x20) IX[B]
>	[17] -1	0	0x0000f200 - 0x0000f21f (0x20) IX[B]
>	[18] -1	0	0x0000f300 - 0x0000f31f (0x20) IX[B]
>	[19] -1	0	0x0000f400 - 0x0000f40f (0x10) IX[B]
>	[20] -1	0	0x0000ea00 - 0x0000eaff (0x100) IX[B]
>	[21] -1	0	0x0000f500 - 0x0000f50f (0x10) IX[B]
>	[22] -1	0	0x0000f600 - 0x0000f603 (0x4) IX[B]
>	[23] -1	0	0x0000f700 - 0x0000f707 (0x8) IX[B]
>	[24] -1	0	0x0000f800 - 0x0000f803 (0x4) IX[B]
>	[25] -1	0	0x0000f900 - 0x0000f907 (0x8) IX[B]
>	[26] -1	0	0x0000e800 - 0x0000e8ff (0x100) IX[B]
>	[27] -1	0	0x0000ec00 - 0x0000ecff (0x100) IX[B]
>	[28] -1	0	0x0000fa00 - 0x0000fa1f (0x20) IX[B]
>	[29] -1	0	0x0000fb00 - 0x0000fb0f (0x10) IX[B]
>	[30] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
>	[31] -1	0	0x0000fd00 - 0x0000fd0f (0x10) IX[B]
>	[32] -1	0	0x0000fe00 - 0x0000fe0f (0x10) IX[B]
>	[33] -1	0	0x0000ee00 - 0x0000eeff (0x100) IX[B]
>	[34] -1	0	0x0000ff00 - 0x0000ff7f (0x80) IX[B]
>	[35] -1	0	0x00009f00 - 0x00009f7f (0x80) IX[B](B)
>(WW) ****INVALID MEM ALLOCATION**** b: 0xce000000 e: 0xce000000 correcting
>(II) window:
>	[0] -1	0	0xdd000000 - 0xdeffffff (0x2000000) MX[B]
>(II) resSize:
>(II) window fixed:
>	[0] -1	0	0xdd000000 - 0xdeffffff (0x2000000) MX[B]
>(II) resource ranges after probing:
>	[0] -1	0	0xdd000000 - 0xdd000000 (0x1) MX[B](B)
>	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
>	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[5] -1	0	0xdfffc000 - 0xdfffc0ff (0x100) MX[B]
>	[6] -1	0	0xdfffd000 - 0xdfffd0ff (0x100) MX[B]
>	[7] -1	0	0xdfffe000 - 0xdfffe0ff (0x100) MX[B]
>	[8] -1	0	0xdffff000 - 0xdffff7ff (0x800) MX[B]
>	[9] -1	0	0xd0000000 - 0xcfffffff (0x0) MX[B]O
>	[10] -1	0	0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
>	[11] -1	0	0xdd000000 - 0xddffffff (0x1000000) MX[B](B)
>	[12] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
>	[13] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
>	[14] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
>	[15] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[16] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
>	[17] -1	0	0x0000e600 - 0x0000e6ff (0x100) IX[B]
>	[18] -1	0	0x0000f000 - 0x0000f01f (0x20) IX[B]
>	[19] -1	0	0x0000f100 - 0x0000f11f (0x20) IX[B]
>	[20] -1	0	0x0000f200 - 0x0000f21f (0x20) IX[B]
>	[21] -1	0	0x0000f300 - 0x0000f31f (0x20) IX[B]
>	[22] -1	0	0x0000f400 - 0x0000f40f (0x10) IX[B]
>	[23] -1	0	0x0000ea00 - 0x0000eaff (0x100) IX[B]
>	[24] -1	0	0x0000f500 - 0x0000f50f (0x10) IX[B]
>	[25] -1	0	0x0000f600 - 0x0000f603 (0x4) IX[B]
>	[26] -1	0	0x0000f700 - 0x0000f707 (0x8) IX[B]
>	[27] -1	0	0x0000f800 - 0x0000f803 (0x4) IX[B]
>	[28] -1	0	0x0000f900 - 0x0000f907 (0x8) IX[B]
>	[29] -1	0	0x0000e800 - 0x0000e8ff (0x100) IX[B]
>	[30] -1	0	0x0000ec00 - 0x0000ecff (0x100) IX[B]
>	[31] -1	0	0x0000fa00 - 0x0000fa1f (0x20) IX[B]
>	[32] -1	0	0x0000fb00 - 0x0000fb0f (0x10) IX[B]
>	[33] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
>	[34] -1	0	0x0000fd00 - 0x0000fd0f (0x10) IX[B]
>	[35] -1	0	0x0000fe00 - 0x0000fe0f (0x10) IX[B]
>	[36] -1	0	0x0000ee00 - 0x0000eeff (0x100) IX[B]
>	[37] -1	0	0x0000ff00 - 0x0000ff7f (0x80) IX[B]
>	[38] -1	0	0x00009f00 - 0x00009f7f (0x80) IX[B](B)
>	[39] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
>	[40] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
>(II) Setting vga for screen 0.
>(II) Enabling PCI device
>(II) Loading sub module "int10"
>(II) LoadModule: "int10"
>(II) Loading /usr/lib64/xorg/modules//libint10.so
>(II) Module int10: vendor="X.Org Foundation"
>	compiled for 1.3.0, module version = 1.0.0
>	ABI class: X.Org Video Driver, version 1.2
>(II) NV(0): Initializing int10
>(II) NV(0): Primary V_BIOS segment is: 0xc000
>(--) NV(0): Console is VGA mode 0x3
>(**) NV(0): Depth 24, (--) framebuffer bpp 32
>(==) NV(0): RGB weight 888
>(==) NV(0): Default visual is TrueColor
>(==) NV(0): Using hardware cursor
>(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
>(II) NV(0): MMIO registers mapped at 0x2aaaac77c000
>(--) NV(0): Total video RAM: 256.0 MB
>(--) NV(0):       BAR1 size: 256.0 MB
>(--) NV(0):   Mapped memory: 255.0 MB
>(II) NV(0): Linear framebuffer mapped at 0x2aaaad77c000
>(II) Loading sub module "i2c"
>(II) LoadModule: "i2c"(II) Module already built-in
>(II) Loading sub module "ddc"
>(II) LoadModule: "ddc"(II) Module already built-in
>(--) NV(0): Connector map:
>(--) NV(0):   Bus 0 -> DAC1
>(--) NV(0):   Bus 1 -> DAC0
>(--) NV(0):   Bus 1 -> SOR0
>(II) NV(0): I2C bus "I2C0" initialized.
>(II) NV(0): Output VGA1 has no monitor section
>(II) NV(0): I2C bus "I2C1" initialized.
>(II) NV(0): Output VGA0 has no monitor section
>(II) NV(0): Output DVI0 has no monitor section
>(II) NV(0): Probing for EDID on I2C bus 0...
>(II) NV(0): I2C device "I2C0:ddc2" registered at address 0xA0.
>(--) NV(0): DDC detected a CRT:
>(II) NV(0): Manufacturer: GSM  Model: 4a90  Serial#: 71375
>(II) NV(0): Year: 2005  Week: 3
>(II) NV(0): EDID Version: 1.3
>(II) NV(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
>(II) NV(0): Sync:  Separate  Composite  SyncOnGreen
>(II) NV(0): Max H-Image Size [cm]: horiz.: 38  vert.: 30
>(II) NV(0): Gamma: 2.20
>(II) NV(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
>(II) NV(0): First detailed timing is preferred mode
>(II) NV(0): redX: 0.647 redY: 0.346   greenX: 0.292 greenY: 0.602
>(II) NV(0): blueX: 0.149 blueY: 0.130   whiteX: 0.313 whiteY: 0.328
>(II) NV(0): Supported VESA Video Modes:
>(II) NV(0): 720x400@70Hz
>(II) NV(0): 640x480@60Hz
>(II) NV(0): 640x480@75Hz
>(II) NV(0): 800x600@60Hz
>(II) NV(0): 800x600@75Hz
>(II) NV(0): 832x624@75Hz
>(II) NV(0): 1024x768@60Hz
>(II) NV(0): 1024x768@75Hz
>(II) NV(0): 1280x1024@75Hz
>(II) NV(0): 1152x870@75Hz
>(II) NV(0): Manufacturer's mask: 0
>(II) NV(0): Supported Future Video Modes:
>(II) NV(0): #0: hsize: 640  vsize 480  refresh: 75  vid: 20273
>(II) NV(0): #1: hsize: 800  vsize 600  refresh: 75  vid: 20293
>(II) NV(0): #2: hsize: 1024  vsize 768  refresh: 75  vid: 20321
>(II) NV(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
>(II) NV(0): Supported additional Video Mode:
>(II) NV(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
>(II) NV(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
>(II) NV(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
>(II) NV(0): Ranges: V min: 56  V max: 75 Hz, H min: 30  H max: 83 kHz, PixClock max 140 MHz
>(II) NV(0): Monitor name: L1915S
>(II) NV(0): Monitor name: 
>(II) NV(0): EDID (in hex):
>(II) NV(0): 	00ffffffffffff001e6d904acf160100
>(II) NV(0): 	030f01036e261e78eaec54a5584a9a26
>(II) NV(0): 	215054a56b80314f454f614f81800101
>(II) NV(0): 	010101010101302a009851002a403070
>(II) NV(0): 	1300782d1100001e000000fd00384b1e
>(II) NV(0): 	530e000a202020202020000000fc004c
>(II) NV(0): 	31393135530a202020202020000000fc
>(II) NV(0): 	000a2020202020202020202020200070
>(--) NV(0): Trying load detection on VGA1 ... found one!
>(II) NV(0): EDID for output VGA1
>(II) NV(0): Manufacturer: GSM  Model: 4a90  Serial#: 71375
>(II) NV(0): Year: 2005  Week: 3
>(II) NV(0): EDID Version: 1.3
>(II) NV(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
>(II) NV(0): Sync:  Separate  Composite  SyncOnGreen
>(II) NV(0): Max H-Image Size [cm]: horiz.: 38  vert.: 30
>(II) NV(0): Gamma: 2.20
>(II) NV(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
>(II) NV(0): First detailed timing is preferred mode
>(II) NV(0): redX: 0.647 redY: 0.346   greenX: 0.292 greenY: 0.602
>(II) NV(0): blueX: 0.149 blueY: 0.130   whiteX: 0.313 whiteY: 0.328
>(II) NV(0): Supported VESA Video Modes:
>(II) NV(0): 720x400@70Hz
>(II) NV(0): 640x480@60Hz
>(II) NV(0): 640x480@75Hz
>(II) NV(0): 800x600@60Hz
>(II) NV(0): 800x600@75Hz
>(II) NV(0): 832x624@75Hz
>(II) NV(0): 1024x768@60Hz
>(II) NV(0): 1024x768@75Hz
>(II) NV(0): 1280x1024@75Hz
>(II) NV(0): 1152x870@75Hz
>(II) NV(0): Manufacturer's mask: 0
>(II) NV(0): Supported Future Video Modes:
>(II) NV(0): #0: hsize: 640  vsize 480  refresh: 75  vid: 20273
>(II) NV(0): #1: hsize: 800  vsize 600  refresh: 75  vid: 20293
>(II) NV(0): #2: hsize: 1024  vsize 768  refresh: 75  vid: 20321
>(II) NV(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
>(II) NV(0): Supported additional Video Mode:
>(II) NV(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
>(II) NV(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
>(II) NV(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
>(II) NV(0): Ranges: V min: 56  V max: 75 Hz, H min: 30  H max: 83 kHz, PixClock max 140 MHz
>(II) NV(0): Monitor name: L1915S
>(II) NV(0): Monitor name: 
>(II) NV(0): EDID (in hex):
>(II) NV(0): 	00ffffffffffff001e6d904acf160100
>(II) NV(0): 	030f01036e261e78eaec54a5584a9a26
>(II) NV(0): 	215054a56b80314f454f614f81800101
>(II) NV(0): 	010101010101302a009851002a403070
>(II) NV(0): 	1300782d1100001e000000fd00384b1e
>(II) NV(0): 	530e000a202020202020000000fc004c
>(II) NV(0): 	31393135530a202020202020000000fc
>(II) NV(0): 	000a2020202020202020202020200070
>(II) NV(0): EDID vendor "GSM", prod id 19088
>(II) NV(0): Using EDID range info for horizontal sync
>(II) NV(0): Using EDID range info for vertical refresh
>(II) NV(0): Printing DDC gathered Modelines:
>(II) NV(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
>(II) NV(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
>(II) NV(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
>(II) NV(0): Modeline "640x480"x0.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
>(II) NV(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
>(II) NV(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
>(II) NV(0): Modeline "1024x768"x0.0   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
>(II) NV(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
>(II) NV(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
>(II) NV(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
>(II) NV(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
>(II) NV(0): Modeline "640x480"x74.8   30.75  640 664 728 816  480 483 487 504 -hsync +vsync (37.7 kHz)
>(II) NV(0): Modeline "800x600"x74.9   49.00  800 840 920 1040  600 603 607 629 -hsync +vsync (47.1 kHz)
>(II) NV(0): Modeline "1024x768"x74.9   82.00  1024 1088 1192 1360  768 771 775 805 -hsync +vsync (60.3 kHz)
>(II) NV(0): Modeline "1280x1024"x59.9  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
>(II) NV(0): EDID vendor "GSM", prod id 19088
>(II) NV(0): Not using default mode "640x350" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "640x400" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "720x400" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "832x624" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1152x768" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1280x720" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "640x360" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1280x720" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "640x360" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1280x720" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "640x360" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1280x720" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "640x360" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1280x800" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "640x400" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1280x800" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "640x400" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1280x800" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "640x400" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1280x800" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "640x400" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1280x768" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "640x384" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1280x768" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "640x384" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1280x768" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "640x384" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1280x768" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "640x384" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1360x768" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "680x384" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1360x768" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "680x384" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1440x900" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "720x450" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1600x1024" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1920x1080" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "960x540" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1920x1200" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
>(II) NV(0): Printing probed modes for output VGA1
>(II) NV(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
>(II) NV(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
>(II) NV(0): Modeline "1280x1024"x59.9  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
>(II) NV(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
>(II) NV(0): Modeline "1024x768"x74.9   82.00  1024 1088 1192 1360  768 771 775 805 -hsync +vsync (60.3 kHz)
>(II) NV(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
>(II) NV(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
>(II) NV(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
>(II) NV(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
>(II) NV(0): Modeline "800x600"x74.9   49.00  800 840 920 1040  600 603 607 629 -hsync +vsync (47.1 kHz)
>(II) NV(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
>(II) NV(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
>(II) NV(0): Modeline "640x480"x74.8   30.75  640 664 728 816  480 483 487 504 -hsync +vsync (37.7 kHz)
>(II) NV(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
>(II) NV(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
>(II) NV(0): Probing for EDID on I2C bus 1...
>(II) NV(0): I2C device "I2C1:ddc2" registered at address 0xA0.
>(II) NV(0): I2C device "I2C1:ddc2" removed.
>(II) NV(0):   ... none found
>(--) NV(0): Trying load detection on VGA0 ... nothing.
>(II) NV(0): EDID for output VGA0
>(II) NV(0): EDID for output DVI0
>(II) NV(0): Output VGA1 connected
>(II) NV(0): Output VGA0 disconnected
>(II) NV(0): Output DVI0 disconnected
>(II) NV(0): Output VGA1 using initial mode 1280x1024
>(--) NV(0): Virtual size is 1280x1280 (pitch 1280)
>(**) NV(0):  Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
>(II) NV(0): Modeline "1280x1024"  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync
>(**) NV(0):  Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
>(II) NV(0): Modeline "1280x1024"  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync
>(**) NV(0):  Driver mode "1280x1024": 109.0 MHz (scaled from 0.0 MHz), 63.7 kHz, 59.9 Hz
>(II) NV(0): Modeline "1280x1024"  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync
>(**) NV(0):  Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
>(II) NV(0): Modeline "1152x864"  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync
>(**) NV(0):  Driver mode "1024x768": 82.0 MHz (scaled from 0.0 MHz), 60.3 kHz, 74.9 Hz
>(II) NV(0): Modeline "1024x768"   82.00  1024 1088 1192 1360  768 771 775 805 -hsync +vsync
>(**) NV(0):  Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
>(II) NV(0): Modeline "1024x768"   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync
>(**) NV(0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
>(II) NV(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync
>(**) NV(0):  Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
>(II) NV(0): Modeline "832x624"   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync
>(**) NV(0):  Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
>(II) NV(0): Modeline "800x600"   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync
>(**) NV(0):  Driver mode "800x600": 49.0 MHz (scaled from 0.0 MHz), 47.1 kHz, 74.9 Hz
>(II) NV(0): Modeline "800x600"   49.00  800 840 920 1040  600 603 607 629 -hsync +vsync
>(**) NV(0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
>(II) NV(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync
>(**) NV(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
>(II) NV(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 -hsync -vsync
>(**) NV(0):  Driver mode "640x480": 30.8 MHz (scaled from 0.0 MHz), 37.7 kHz, 74.8 Hz
>(II) NV(0): Modeline "640x480"   30.75  640 664 728 816  480 483 487 504 -hsync +vsync
>(**) NV(0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
>(II) NV(0): Modeline "640x480"   25.20  640 656 752 800  480 490 492 525 -hsync -vsync
>(**) NV(0):  Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
>(II) NV(0): Modeline "720x400"   28.32  720 738 846 900  400 412 414 449 -hsync +vsync
>(**) NV(0): Display dimensions: (380, 300) mm
>(**) NV(0): DPI set to (85, 108)
>(II) Loading sub module "fb"
>(II) LoadModule: "fb"
>(II) Loading /usr/lib64/xorg/modules//libfb.so
>(II) Module fb: vendor="X.Org Foundation"
>	compiled for 1.3.0, module version = 1.0.0
>	ABI class: X.Org ANSI C Emulation, version 0.3
>(II) Loading sub module "xaa"
>(II) LoadModule: "xaa"
>(II) Loading /usr/lib64/xorg/modules//libxaa.so
>(II) Module xaa: vendor="X.Org Foundation"
>	compiled for 1.3.0, module version = 1.2.0
>	ABI class: X.Org Video Driver, version 1.2
>(II) Loading sub module "ramdac"
>(II) LoadModule: "ramdac"(II) Module already built-in
>(--) Depth 24 pixmap format is 32 bpp
>(II) do I need RAC?  No, I don't.
>(II) resource ranges after preInit:
>	[0] 0	0	0xdd000000 - 0xdd000000 (0x1) MX[B]
>	[1] 0	0	0xb0000000 - 0xbfffffff (0x10000000) MX[B]
>	[2] 0	0	0xdd000000 - 0xddffffff (0x1000000) MX[B]
>	[3] -1	0	0xdd000000 - 0xdd000000 (0x1) MX[B](B)
>	[4] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
>	[5] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[6] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[7] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[8] -1	0	0xdfffc000 - 0xdfffc0ff (0x100) MX[B]
>	[9] -1	0	0xdfffd000 - 0xdfffd0ff (0x100) MX[B]
>	[10] -1	0	0xdfffe000 - 0xdfffe0ff (0x100) MX[B]
>	[11] -1	0	0xdffff000 - 0xdffff7ff (0x800) MX[B]
>	[12] -1	0	0xd0000000 - 0xcfffffff (0x0) MX[B]O
>	[13] -1	0	0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
>	[14] -1	0	0xdd000000 - 0xddffffff (0x1000000) MX[B](B)
>	[15] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
>	[16] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
>	[17] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
>	[18] 0	0	0x00009f00 - 0x00009f7f (0x80) IX[B]
>	[19] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[20] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
>	[21] -1	0	0x0000e600 - 0x0000e6ff (0x100) IX[B]
>	[22] -1	0	0x0000f000 - 0x0000f01f (0x20) IX[B]
>	[23] -1	0	0x0000f100 - 0x0000f11f (0x20) IX[B]
>	[24] -1	0	0x0000f200 - 0x0000f21f (0x20) IX[B]
>	[25] -1	0	0x0000f300 - 0x0000f31f (0x20) IX[B]
>	[26] -1	0	0x0000f400 - 0x0000f40f (0x10) IX[B]
>	[27] -1	0	0x0000ea00 - 0x0000eaff (0x100) IX[B]
>	[28] -1	0	0x0000f500 - 0x0000f50f (0x10) IX[B]
>	[29] -1	0	0x0000f600 - 0x0000f603 (0x4) IX[B]
>	[30] -1	0	0x0000f700 - 0x0000f707 (0x8) IX[B]
>	[31] -1	0	0x0000f800 - 0x0000f803 (0x4) IX[B]
>	[32] -1	0	0x0000f900 - 0x0000f907 (0x8) IX[B]
>	[33] -1	0	0x0000e800 - 0x0000e8ff (0x100) IX[B]
>	[34] -1	0	0x0000ec00 - 0x0000ecff (0x100) IX[B]
>	[35] -1	0	0x0000fa00 - 0x0000fa1f (0x20) IX[B]
>	[36] -1	0	0x0000fb00 - 0x0000fb0f (0x10) IX[B]
>	[37] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
>	[38] -1	0	0x0000fd00 - 0x0000fd0f (0x10) IX[B]
>	[39] -1	0	0x0000fe00 - 0x0000fe0f (0x10) IX[B]
>	[40] -1	0	0x0000ee00 - 0x0000eeff (0x100) IX[B]
>	[41] -1	0	0x0000ff00 - 0x0000ff7f (0x80) IX[B]
>	[42] -1	0	0x00009f00 - 0x00009f7f (0x80) IX[B](B)
>	[43] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
>	[44] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
>(--) NV(0): 153.75 MB available for offscreen pixmaps
>(II) NV(0): Using XFree86 Acceleration Architecture (XAA)
>	Screen to screen bit blits
>	Solid filled rectangles
>	8x8 mono pattern filled rectangles
>	Indirect CPU to Screen color expansion
>	Solid Lines
>	Scanline Image Writes
>	Offscreen Pixmaps
>	Setting up tile and stipple cache:
>		32 128x128 slots
>		32 256x256 slots
>		16 512x512 slots
>(==) NV(0): Backing store disabled
>(==) NV(0): Silken mouse enabled
>(II) NV(0): RandR 1.2 enabled, ignore the following RandR disabled message.
>(--) RandR disabled
>(II) Initializing built-in extension MIT-SHM
>(II) Initializing built-in extension XInputExtension
>(II) Initializing built-in extension XTEST
>(II) Initializing built-in extension XKEYBOARD
>(II) Initializing built-in extension XC-APPGROUP
>(II) Initializing built-in extension XAccessControlExtension
>(II) Initializing built-in extension SECURITY
>(II) Initializing built-in extension XINERAMA
>(II) Initializing built-in extension XFIXES
>(II) Initializing built-in extension XFree86-Bigfont
>(II) Initializing built-in extension RENDER
>(II) Initializing built-in extension RANDR
>(II) Initializing built-in extension COMPOSITE
>(II) Initializing built-in extension DAMAGE
>(II) Initializing built-in extension XEVIE
>(EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
>(II) NV(0): Setting screen physical size to 376 x 301
>(**) Option "CoreKeyboard"
>(**) Keyboard0: Core Keyboard
>(**) Option "Protocol" "standard"
>(**) Keyboard0: Protocol: standard
>(**) Option "AutoRepeat" "500 30"
>(**) Option "XkbRules" "xorg"
>(**) Keyboard0: XkbRules: "xorg"
>(**) Option "XkbModel" "pc105"
>(**) Keyboard0: XkbModel: "pc105"
>(**) Option "XkbLayout" "es"
>(**) Keyboard0: XkbLayout: "es"
>(**) Option "CustomKeycodes" "off"
>(**) Keyboard0: CustomKeycodes disabled
>(WW) <default pointer>: No Device specified, looking for one...
>(II) <default pointer>: Setting Device option to "/dev/input/mice"
>(--) <default pointer>: Device: "/dev/input/mice"
>(==) <default pointer>: Protocol: "Auto"
>(**) Option "CorePointer"
>(**) <default pointer>: Core Pointer
>(==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
>(**) <default pointer>: ZAxisMapping: buttons 4 and 5
>(**) <default pointer>: Buttons: 9
>(**) <default pointer>: Sensitivity: 1
>(II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
>(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
>(II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
>(II) <default pointer>: ps2EnableDataReporting: succeeded
>(II) 3rd Button detected: disabling emulate3Button

Actions: View

Attachments on bug 436615: 297297