Attachment 297310 Details for Bug 436583 – dmesg of kernel 2.6.24.3-22.fc8

dmesg of kernel 2.6.24.3-22.fc8

dmesg_of_kernel_2.6.24.3-22.fc8.txt (text/plain), 25.37 KB, created by Michael Wiktowy on 2008-03-08 17:17:41 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Michael Wiktowy

Created: 2008-03-08 17:17:41 UTC

Size: 25.37 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.24.3-22.fc8 (mockbuild@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Fri Mar 7 10:08:30 EST 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
> BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
> BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 262128) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   262128
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   262128
>On node 0 totalpages: 262128
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 255 pages used for memmap
>  HighMem zone: 32497 pages, LIFO batch:7
>  Movable zone: 0 pages used for memmap
>DMI 2.2 present.
>Using APIC driver default
>ACPI: RSDP 000F75E0, 0014 (r0 Nvidia)
>ACPI: RSDT 3FFF3000, 002C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP 3FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT 3FFF30C0, 43E7 (r1 NVIDIA AWRDACPI     1000 MSFT  100000E)
>ACPI: FACS 3FFF0000, 0040
>ACPI: APIC 3FFF74C0, 006E (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:8 APIC version 16
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: BIOS IRQ0 pin2 override ignored.
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260081
>Kernel command line: ro root=LABEL=/1
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07ba000 soft=c079a000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2162.774 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1031232k/1048512k available (2237k kernel code, 16524k reserved, 1132k data, 284k init, 131008k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0750000 - 0xc0797000   ( 284 kB)
>      .data : 0xc062f689 - 0xc074a724   (1132 kB)
>      .text : 0xc0400000 - 0xc062f689   (2237 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 4327.53 BogoMIPS (lpj=2163768)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 256K (64 bytes/line)
>CPU: After all inits, caps: 0383f3ff c1c3fbff 00000000 00000420 00000000 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>CPU0: AMD Athlon(tm) XP 2700+ stepping 01
>Total of 1 processors activated (4327.53 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1680 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000001
>  groups: 00000001
>net_namespace: 64 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 12:02:15  Date: 03/08/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfb490, last bus=3
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: nForce2 C1 Halt Disconnect fixup
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB1._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 11 *12 14 15)
>ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 11 *12 14 15)
>ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 *12 14 15)
>ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 *12 14 15)
>ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
>ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
>ACPI: PCI Interrupt Link [APC3] (IRQs *18)
>ACPI: PCI Interrupt Link [APC4] (IRQs *19)
>ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCS] (IRQs *23)
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 16 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>Time: tsc clocksource has been installed.
>system 00:00: ioport range 0x4000-0x407f has been reserved
>system 00:00: ioport range 0x4080-0x40ff has been reserved
>system 00:00: ioport range 0x4400-0x447f has been reserved
>system 00:00: ioport range 0x4480-0x44ff has been reserved
>system 00:00: ioport range 0x4200-0x427f has been reserved
>system 00:00: ioport range 0x4280-0x42ff has been reserved
>system 00:01: ioport range 0x5000-0x503f has been reserved
>system 00:01: ioport range 0x5500-0x553f has been reserved
>system 00:02: iomem range 0xd5800-0xd7fff has been reserved
>system 00:02: iomem range 0xf0000-0xf7fff could not be reserved
>system 00:02: iomem range 0xf8000-0xfbfff could not be reserved
>system 00:02: iomem range 0xfc000-0xfffff could not be reserved
>system 00:02: iomem range 0x3fff0000-0x3fffffff could not be reserved
>system 00:02: iomem range 0xffff0000-0xffffffff could not be reserved
>system 00:02: iomem range 0x0-0x9ffff could not be reserved
>system 00:02: iomem range 0x100000-0x3ffeffff could not be reserved
>system 00:02: iomem range 0xfec00000-0xfec00fff could not be reserved
>system 00:02: iomem range 0xfee00000-0xfee00fff could not be reserved
>system 00:04: ioport range 0x4d0-0x4d1 has been reserved
>PCI: Bridge: 0000:00:08.0
>  IO window: 9000-afff
>  MEM window: ec000000-edffffff
>  PREFETCH window: 50000000-500fffff
>PCI: Bridge: 0000:00:0c.0
>  IO window: b000-bfff
>  MEM window: e8000000-e9ffffff
>  PREFETCH window: 50100000-501fffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: c000-cfff
>  MEM window: ea000000-ebffffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>PCI: Setting latency timer of device 0000:00:0c.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2974k freed
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1204977735.513:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 20B1A3CAF4E48D85
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:03:00.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected NVIDIA nForce2 chipset
>agpgart: AGP aperture is 128M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Processor cpuid 681 not supported
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 0:813:25
>Freeing unused kernel memory: 284k freed
>Write protecting the kernel read-only data: 893k
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 22 (level, high) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.2 to 64
>ehci_hcd 0000:00:02.2: EHCI Host Controller
>ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:02.2: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:02.2
>ehci_hcd 0000:00:02.2: irq 16, io mem 0xee082000
>ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, high) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:02.0: irq 17, io mem 0xee085000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 20 (level, high) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:02.1 to 64
>ohci_hcd 0000:00:02.1: OHCI Host Controller
>ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:02.1: irq 18, io mem 0xee081000
>usb 1-1: new high speed USB device using ehci_hcd and address 2
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 3 ports detected
>usb 1-1: configuration #1 chosen from 1 choice
>hub 1-1:1.0: USB hub found
>hub 1-1:1.0: 2 ports detected
>USB Universal Host Controller Interface driver v3.0
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>sata_sil 0000:01:0b.0: version 2.3
>ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
>ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC3] -> GSI 18 (level, high) -> IRQ 19
>scsi0 : sata_sil
>scsi1 : sata_sil
>ata1: SATA max UDMA/100 mmio m512@0xed000000 tf 0xed000080 irq 19
>ata2: SATA max UDMA/100 mmio m512@0xed000000 tf 0xed0000c0 irq 19
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata1.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
>ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/100
>usb 2-2: new low speed USB device using ohci_hcd and address 2
>usb 2-2: configuration #1 chosen from 1 choice
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata2.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
>ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata2.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      ST3320620AS      3.AA PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: Direct-Access     ATA      ST3320620AS      3.AA PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2
>sd 1:0:0:0: [sdb] Attached SCSI disk
>hiddev96hidraw0: USB HID v1.10 Device [American Power Conversion Back-UPS XS 1200 FW:8.g1 .D USB FW:g1 ] on usb-0000:00:02.0-2
>usb 3-1: new low speed USB device using ohci_hcd and address 2
>usb 3-1: configuration #1 chosen from 1 choice
>input: HID 050d:0805 as /devices/pci0000:00/0000:00:02.1/usb3/3-1/3-1:1.0/input/input2
>input,hidraw1: USB HID v1.00 Gamepad [HID 050d:0805] on usb-0000:00:02.1-1
>usb 3-1: string descriptor 0 read error: -32
>usb 3-2: new full speed USB device using ohci_hcd and address 3
>usb 3-2: configuration #1 chosen from 1 choice
>input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:02.1/usb3/3-2/3-2:1.0/input/input3
>input,hidraw2: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:02.1-2
>hiddev97hidraw3: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:02.1-2
>usb 1-1.1: new high speed USB device using ehci_hcd and address 6
>usb 1-1.1: configuration #1 chosen from 1 choice
>hub 1-1.1:1.0: USB hub found
>hub 1-1.1:1.0: 4 ports detected
>usb 1-1.1.1: new high speed USB device using ehci_hcd and address 7
>usb 1-1.1.1: configuration #1 chosen from 1 choice
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1204977741.876:2): enforcing=1 old_enforcing=0 auid=4294967295
>SELinux:8192 avtab hash slots allocated.Num of rules:220617
>SELinux:8192 avtab hash slots allocated.Num of rules:220617
>security:  8 users, 12 roles, 2398 types, 114 bools, 1 sens, 1024 cats
>security:  67 classes, 220617 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda2, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>audit(1204977742.337:3): policy loaded auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
>i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5500
>Initializing USB Mass Storage driver...
>scsi2 : SCSI emulation for USB Mass Storage devices
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 7
>usb-storage: waiting for device to settle before scanning
>input: Power Button (FF) as /devices/virtual/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/virtual/input/input5
>ACPI: Power Button (CM) [PWRB]
>pata_amd 0000:00:09.0: version 0.3.10
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>scsi3 : pata_amd
>scsi4 : pata_amd
>ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
>ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
>ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-4160B, A300, max UDMA/66
>input: PC Speaker as /devices/platform/pcspkr/input/input6
>ata4.00: configured for UDMA/66
>scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4160B A300 PQ: 0 ANSI: 5
>scsi 4:0:0:0: Attached scsi generic sg2 type 5
>ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 22 (level, high) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>FDC 0 is a post-1991 82077
>intel8x0_measure_ac97_clock: measured 50793 usecs
>intel8x0: clocking to 47495
>ACPI: PCI Interrupt Link [AP3C] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [AP3C] -> GSI 21 (level, high) -> IRQ 17
>3c59x: Donald Becker and others.
>0000:02:01.0: 3Com PCI 3c920 Tornado at f897c000.
>ACPI: PCI Interrupt Link [APCM] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [APCM] -> GSI 20 (level, high) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>firewire_ohci: Added fw-ohci device 0000:00:0d.0, OHCI version 1.10
>parport_pc 00:0c: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>gameport: NS558 PnP Gameport is pnp00:0f/gameport0, io 0x201, speed 59659kHz
>udev: renamed network interface eth0 to eth1
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda2, internal journal
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>usb-storage: device scan complete
>scsi 2:0:0:0: Direct-Access     Generic  Flash HS-CF      4.44 PQ: 0 ANSI: 0
>scsi 2:0:0:1: Direct-Access     Generic  Flash HS-MS      4.44 PQ: 0 ANSI: 0
>scsi 2:0:0:2: Direct-Access     Generic  Flash HS-SM      4.44 PQ: 0 ANSI: 0
>scsi 2:0:0:3: Direct-Access     Generic  Flash HS-SD/MMC  4.44 PQ: 0 ANSI: 0
>sd 2:0:0:0: [sdc] Attached SCSI removable disk
>sd 2:0:0:0: Attached scsi generic sg3 type 0
>sd 2:0:0:1: [sdd] Attached SCSI removable disk
>sd 2:0:0:1: Attached scsi generic sg4 type 0
>sd 2:0:0:2: [sde] Attached SCSI removable disk
>sd 2:0:0:2: Attached scsi generic sg5 type 0
>sd 2:0:0:3: [sdf] Attached SCSI removable disk
>sd 2:0:0:3: Attached scsi generic sg6 type 0
>Adding 2096472k swap on /dev/sda3.  Priority:-1 extents:1 across:2096472k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>warning: process `kudzu' used the deprecated sysctl system call with 1.23.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>audit(1204995759.849:4): audit_pid=1865 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
>ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 20
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized radeon 1.28.0 20060524 on minor 0
>agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V3 device at 0000:03:00.0 into 4x mode
>[drm] Setting GART location based on new memory map
>[drm] Loading R300 Microcode
>[drm] writeback test succeeded in 1 usecs
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
>EXT3 FS on sdb2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdb2, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
>EXT3 FS on sdb1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdb1, type ext3), uses xattr
>fuse init (API version 7.9)
>SELinux: initialized (dev sda1, type fuseblk), uses genfs_contexts

Actions: View

Attachments on bug 436583: 297309 | 297310 | 297311 | 297318 | 297760 | 297761 | 297763 | 299389 | 301393 | 301394