Attachment 297375 Details for Bug 436709 – dmesg - output after crash when card is NOT inserted while booting

dmesg - output after crash when card is NOT inserted while booting

kernel_dump.txt (text/plain), 22.88 KB, created by Grosswiler Roger on 2008-03-09 18:54:24 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Grosswiler Roger

Created: 2008-03-09 18:54:24 UTC

Size: 22.88 KB

patch

obsolete

>Linux neo 2.6.24.3-12.fc8 #1 SMP Tue Feb 26 14:58:29 EST 2008 i686 i686 i386 GNU/Linux
>Initializing cgroup subsys cpuset
>Linux version 2.6.24.3-12.fc8 (mockbuild@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Tue Feb 26 14:58:29 EST 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001eff0000 (usable)
> BIOS-e820: 000000001eff0000 - 000000001effffc0 (ACPI data)
> BIOS-e820: 000000001effffc0 - 000000001f000000 (ACPI NVS)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>495MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 126960) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   126960
>  HighMem    126960 ->   126960
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   126960
>On node 0 totalpages: 126960
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 959 pages used for memmap
>  Normal zone: 121905 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000E5010, 0014 (r0 OID_00)
>ACPI: RSDT 1EFFFBC0, 0030 (r1 INSYDE RSDT_000        1   &    10007)
>ACPI: FACP 1EFFFAC0, 0084 (r3 INSYDE FACP_000      100   &    10007)
>ACPI: DSDT 1EFFB5C0, 44FA (r1 INSYDE   VT8603     1000 INTL  2002025)
>ACPI: FACS 1EFFFFC0, 0040
>ACPI: BOOT 1EFFFB50, 0028 (r1 INSYDE SYS_BOOT      100   &    10007)
>ACPI: DBGP 1EFFFB80, 0034 (r1 INSYDE DBGP_000        1   &    10007)
>ACPI: DMI detected: Hewlett-Packard
>ACPI: PM-Timer IO Port: 0x1008
>Allocating PCI resources starting at 20000000 (gap: 1f000000:e0f80000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
>swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125969
>Kernel command line: ro root=LABEL=/1 rhgb quiet
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffb000 (013ed000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07ba000 soft=c079a000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Detected 1133.188 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 495268k/507840k available (2238k kernel code, 11904k reserved, 1131k data, 284k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xdf800000 - 0xff7fe000   ( 511 MB)
>    lowmem  : 0xc0000000 - 0xdeff0000   ( 495 MB)
>      .init : 0xc0750000 - 0xc0797000   ( 284 kB)
>      .data : 0xc062fa09 - 0xc074a724   (1131 kB)
>      .text : 0xc0400000 - 0xc062fa09   (2238 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 2267.68 BogoMIPS (lpj=1133843)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 512K
>CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040 00000000 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>ACPI: setting ELCR to 0200 (from 0c00)
>CPU0: Intel(R) Pentium(R) III Mobile CPU      1133MHz stepping 01
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1680 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000001
>  groups: 00000001
>net_namespace: 64 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 11:13:35  Date: 03/08/08
>NET: Registered protocol family 16
>ACPI: ACPI Dock Station Driver 
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xe8a74, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: EC: GPE = 0x1, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in interrupt mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 9 *10 11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>PCI: setting IRQ 13 as level-triggered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>Time: tsc clocksource has been installed.
>system 00:03: iomem range 0xfff80000-0xffffffff could not be reserved
>system 00:05: ioport range 0x4d0-0x4d1 has been reserved
>system 00:05: ioport range 0x3f0-0x3f1 has been reserved
>system 00:05: ioport range 0x1000-0x107f has been reserved
>system 00:05: ioport range 0x1400-0x147f has been reserved
>system 00:05: ioport range 0x1600-0x167f has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: c000-dfff
>  MEM window: e0000000-efffffff
>  PREFETCH window: 90000000-9fffffff
>PCI: Bus 2, cardbus bridge: 0000:00:04.0
>  IO window: 00001800-000018ff
>  IO window: 00001c00-00001cff
>  PREFETCH window: 20000000-23ffffff
>  MEM window: 24000000-27ffffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>checking if image is initramfs... it is
>Switched to high resolution mode on CPU 0
>Freeing initrd memory: 2975k freed
>Simple Boot Flag at 0x37 set to 0x1
>cpufreq: change failed with new_state 2 and result 0
>cpufreq: change failed with new_state 2 and result 0
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1204974817.226:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key FF572035AA99318
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: VIA PCI bridge detected. Disabling DAC.
>Boot video device is 0000:01:00.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Thermal Zone [THRM] (59 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>agpgart: Detected VIA ProSavage PM133/PL133/PN133 chipset
>agpgart: AGP aperture is 64M @ 0xa0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>Yenta: CardBus bridge found at 0000:00:04.0 [103c:0020]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:00:04.0, mfunc 0x018c1882, devctl 0x44
>Yenta: ISA IRQ mask 0x0000, PCI irq 11
>Socket status: 30000006
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 0:913:225
>Freeing unused kernel memory: 284k freed
>Write protecting the kernel read-only data: 894k
>Marking TSC unstable due to: TSC halts in idle.
>Time: acpi_pm clocksource has been installed.
>Synaptics Touchpad, model: 1, fw: 5.8, id: 0x2348b3, caps: 0x904713/0x10008
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input2
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:11.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
>uhci_hcd 0000:00:11.2: UHCI Host Controller
>uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:11.2: irq 10, io base 0x00001200
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:11.3[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
>uhci_hcd 0000:00:11.3: UHCI Host Controller
>uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:11.3: irq 10, io base 0x00001300
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>pata_via 0000:00:11.1: version 0.3.3
>scsi0 : pata_via
>scsi1 : pata_via
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15
>ata1.00: ATA-6: IC25N040ATMR04-0, MO2OAD4A, max UDMA/100
>ata1.00: 78140160 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>ata2.00: ATAPI: UJDA720 DVD/CDRW, 1.00, max UDMA/33
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      IC25N040ATMR04-0 MO2O PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            MATSHITA UJDA720 DVD/CDRW 1.00 PQ: 0 ANSI: 5
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1204974829.833:2): enforcing=1 old_enforcing=0 auid=4294967295
>SELinux:8192 avtab hash slots allocated.Num of rules:217156
>SELinux:8192 avtab hash slots allocated.Num of rules:217156
>security:  8 users, 12 roles, 2363 types, 114 bools, 1 sens, 1024 cats
>security:  67 classes, 217156 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda6, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>audit(1204974831.027:3): policy loaded auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>8139too Fast Ethernet driver 0.9.28
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>eth0: RealTek RTL8139 at 0xdf836000, 00:02:3f:36:58:67, IRQ 10
>eth0:  Identified 8139 chip type 'RTL-8100'
>NET: Registered protocol family 23
>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
>PCI: setting IRQ 9 as level-triggered
>ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>firewire_ohci: Added fw-ohci device 0000:00:0e.0, OHCI version 1.0
>via-ircc: dongle probing not supported, please specify dongle_id module parameter.
>IrDA: Registered device irda0 (via-ircc)
>parport_pc: VIA 686A/8231 detected
>parport_pc: probing current configuration
>parport_pc: Current parallel port base: 0x378
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>parport_pc: VIA parallel port: io=0x378, irq=7
>firewire_core: created device fw0: GUID 00023f220b00440a, S400
>vt8231 0000:00:11.4: base address not set -				 upgrade BIOS or use force_addr=0xaddr
>input: Power Button (FF) as /devices/virtual/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /devices/virtual/input/input4
>ACPI: Lid Switch [LID]
>input: Power Button (CM) as /devices/virtual/input/input5
>ACPI: Power Button (CM) [PWBN]
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0e/LNXVIDEO:00/input/input6
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>input: PC Speaker as /devices/platform/pcspkr/input/input7
>ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
>PCI: Setting latency timer of device 0000:00:11.5 to 64
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda6, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda3, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 1012052k swap on /dev/sda5.  Priority:-1 extents:1 across:1012052k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>warning: process `kudzu' used the deprecated sysctl system call with 1.23.
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>audit(1204971278.175:4): audit_pid=1606 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bridge firewalling registered
>virbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>virbr0: starting userspace STP failed, starting kernel STP
>eth0: link down
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>virbr0: no IPv6 routers present
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized savage 2.4.1 20050313 on minor 0
>mtrr: base(0x92000000) is not aligned on a size(0x5000000) boundary
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 0x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 0x mode
>pccard: CardBus card inserted into slot 0
>yenta EnE: chaning testregister 0xC9, 44 -> 44
>PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>phy0: Selected rate control algorithm 'pid'
>Registered led device: rt61pci-phy0:radio
>Registered led device: rt61pci-phy0:assoc
>udev: renamed network interface wlan0 to wlan3
>ADDRCONF(NETDEV_UP): wlan3: link is not ready
>eth0: link down
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>BUG: unable to handle kernel NULL pointer dereference at virtual address 00000004
>printing eip: dfc9d77a *pde = 1d472067 *pte = 00000000 
>Oops: 0000 [#1] SMP 
>Modules linked in: arc4 ecb blkcipher rt61pci rt2x00pci rt2x00lib rfkill input_polldev mac80211 cfg80211 eeprom_93cx6 savage drm ipt_MASQUERADE iptable_nat nf_nat bridge rfcomm l2cap bluetooth sunrpc nf_conntrack_ipv4 ipt_REJECT iptable_filter ip_tables nf_conntrack_ipv6 xt_state nf_conntrack xt_tcpudp ip6t_ipv6header ip6t_REJECT ip6table_filter ip6_tables x_tables cpufreq_ondemand acpi_cpufreq dm_mirror dm_multipath dm_mod ipv6 snd_via82xx gameport snd_ac97_codec ac97_bus snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq pcspkr joydev serio_raw snd_pcm_oss snd_mixer_oss snd_pcm video output snd_timer snd_page_alloc snd_mpu401_uart snd_rawmidi battery ac snd_seq_device button vt8231 hwmon parport_pc snd parport i2c_viapro via_ircc soundcore firewire_ohci 8139cp firewire_core i2c_core irda 8139too crc_ccitt mii crc_itu_t sr_mod sg cdrom pata_acpi ata_generic pata_via libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd
>
>Pid: 1988, comm: NetworkManager Not tainted (2.6.24.3-12.fc8 #1)
>EIP: 0060:[<dfc9d77a>] EFLAGS: 00210202 CPU: 0
>EIP is at rt61pci_init_txentry+0x20/0x82 [rt61pci]
>EAX: 20000000 EBX: d03b46c0 ECX: 0000001d EDX: d03b3400
>ESI: 00000004 EDI: 00000014 EBP: 00000001 ESP: deb68b70
> DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
>Process NetworkManager (pid: 1988, ti=deb68000 task=dde84690 task.ti=deb68000)
>Stack: d03b9060 de2d6750 00000014 00000001 dfc93cb9 d03b9060 00000000 d03bb480 
>       00000000 dfc922e5 d03b9060 00000000 dfc923b6 d03bb000 d03b8180 dfcb9e99 
>       000040d0 00000001 c1207a00 00200246 00000001 d03bb000 00000006 d03bb15c 
>Call Trace:
> [<dfc93cb9>] rt2x00queue_init_tx+0x3b/0x62 [rt2x00lib]
> [<dfc922e5>] rt2x00lib_enable_radio+0x26/0x61 [rt2x00lib]
> [<dfc923b6>] rt2x00lib_start+0x96/0xa3 [rt2x00lib]
> [<dfcb9e99>] ieee80211_open+0x1ba/0x3df [mac80211]
> [<c05c8bd9>] dev_open+0x42/0x77
> [<c05c78cf>] dev_change_flags+0x9d/0x149
> [<c05ce9fe>] do_setlink+0x212/0x2c5
> [<c05cfc80>] rtnl_setlink+0xdb/0xf7
> [<c05cfba5>] rtnl_setlink+0x0/0xf7
> [<c05cf94b>] rtnetlink_rcv_msg+0x19a/0x1b4
> [<c05cf7b1>] rtnetlink_rcv_msg+0x0/0x1b4
> [<c05dc5c6>] netlink_rcv_skb+0x2d/0x7e
> [<c05cf7ab>] rtnetlink_rcv+0x14/0x1a
> [<c05dc3ad>] netlink_unicast+0x19c/0x1f7
> [<c04ffc18>] copy_from_user+0x32/0x5e
> [<c05dcba5>] netlink_sendmsg+0x27c/0x288
> [<c05bd4fb>] sock_sendmsg+0xc9/0xe4
> [<c043f0a1>] autoremove_wake_function+0x0/0x35
> [<c043f0a1>] autoremove_wake_function+0x0/0x35
> [<c043f0a1>] autoremove_wake_function+0x0/0x35
> [<c04ffc18>] copy_from_user+0x32/0x5e
> [<c04ffc18>] copy_from_user+0x32/0x5e
> [<c05bd6a8>] sys_sendmsg+0x192/0x1f7
> [<c05be1c4>] sys_recvmsg+0x14e/0x1d0
> [<c05bde74>] sys_sendto+0x118/0x138
> [<c04ffe58>] copy_to_user+0x34/0x48
> [<c048b9fb>] cp_new_stat64+0xfc/0x10e
> [<c040b08a>] sched_clock+0x8/0x18
> [<c042558e>] __update_rq_clock+0x19/0x15f
> [<c0404210>] __switch_to+0xcb/0x147
> [<c05be901>] sys_socketcall+0x240/0x261
> [<c04051da>] syscall_call+0x7/0xb
> =======================
>Code: 8b 13 83 e2 fe 09 d0 89 03 5b c3 55 b8 01 00 00 00 57 b9 00 00 00 e0 56 53 8b 5a 10 0f bc c9 d3 e0 25 00 00 00 e0 8b 33 83 c6 04 <8b> 0e 81 e1 ff ff ff 1f 09 c8 b9 00 e0 00 00 89 06 b8 00 1f 00 
>EIP: [<dfc9d77a>] rt61pci_init_txentry+0x20/0x82 [rt61pci] SS:ESP 0068:deb68b70
>---[ end trace ada021b99c612404 ]---

Actions: View

Attachments on bug 436709: 297375