Attachment 297416 Details for Bug 436767 – sensors.conf

sensors.conf

sensors.conf (text/plain), 83.18 KB, created by David Kovalsky on 2008-03-10 11:38:04 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: David Kovalsky

Created: 2008-03-10 11:38:04 UTC

Size: 83.18 KB

patch

obsolete

># Sensors configuration file used by 'libsensors'
>#------------------------------------------------
>#
>##########################################################################
>#                                                                        #
>#    PLEASE READ THIS HELPFUL HINT!!!                                    #
>#                                                                        #
>#       The 'set' lines (generally for min and max values)               #
>#       do not take effect until you run 'sensors -s' as root !!!        #
>#       We suggest you put 'sensors -s' in a /etc/rc.d/... file          #
>#       to be run at boot time after the modules are inserted !!!        #
>#                                                                        #
>##########################################################################
>#
>#
># OVERVIEW
># --------
># This configuration file will be used by all userspace applications
># linked to libsensors. It is NOT used by the lm_sensors drivers directly.
>#
># This config file consists of two parts: the heavily commented LM78
># example, and the real parts. Search for '####' if you want to skip
># to the real stuff.
>#
># Hash marks introduce comments, which continue until the end of a line.
>#
># Identifiers consisting of only digits and letters can be used
># unquoted; other identifiers must be quoted. Escape characters within
># quotes operate like those in C.
>#
>#
># CHIP LINES
># ----------
># A 'chip' line specifies what the following 'label', 'compute', 'set' and
># 'ignore' lines refer to. In this case, until the
># next 'chip' line, everything refers to all lm78, lm78-j and lm79
># chips. Other examples are *-isa-* for everything on the ISA bus, and
># lm78-j-i2c-*-4e for all lm78-j chips on address 0x4e of any I2C bus.
>#
># If more chip statements match a specific chip, they are all considered.
># Later lines overrule earlier lines, so if you set the in0 label for
># lm78-* to "This", and later on the in0 label for lm78-isa-* to "That",
># "That" is used for LM78 chips on the ISA bus, and "This" for LM78
># chips on a non-ISA bus.
>#
>#	chip "lm78-*" "lm78-j-*" "lm79-*"
>#
>#
># FEATURE NAMES
># -------------
># Feature names are used in 'label', 'compute', 'set', and 'ignore' lines.
># Example feature names are 'in0', 'temp2', 'in3_min', and 'temp3_over'.
># These features are defined for each chip in lib/chips.c.
>#
># Undefined features will be silently ignored in 'label' and 'compute' lines.
># Undefined features in 'set' lines will result in 'Unknown feature name'
># when running 'sensors -s'.
>#
># Unfortunately, feature names starting with a number must be in
># double quotes or you get "parse error, expecting 'NAME'".
>#
># If you have trouble, verify the features in lib/chips.c!!!
>#
>#
># LABEL LINES
># -----------
># A label line describes what a certain feature stands for on your
># mainboard. Programs can retrieve these names and display them.
># If no label is specified for a certain feature, the default name
># (ie. 'fan1' for fan1) is used.
>#
># If you specify a label for in1, this label is also used for in1_min and
># in1_max, unless they have their own labels declared. There are several
># of these logical groups.
>#
># These are as advised in the LM78 and LM79 data sheets, and used on most
># boards we have seen.
>#
>#  	label in0 "VCore 1"
>#  	label in1 "VCore 2"
>#  	label in2 "+3.3V"
>#  	label in3 "+5V"
>#  	label in4 "+12V"
>#  	label in5 "-12V"
>#  	label in6 "-5V"
>#
>#
># COMPUTE LINES
># -------------
># A compute line describes how to scale a certain feature. There are
># two expressions in it: the first describes how the /proc value must
># be translated to a user value, the second how a user value must be
># translated to a /proc value. '@' is the value to operate on. You may
># refer to other readable features (like '2 * vid').
>#
># The following operators are valid: + - * / ( ) ^ `
># ^ is e**x and ` is ln(x) (valid in library version 2.0.0 /
># lm_sensors 2.8.0 or higher)
>#
># Like for the label statement, there are logical groups here. They are
># sometimes a bit different, though. For example, fan1_div is in the
># logical label group of fan1 (it gets the same label if none is declared
># for it), but it is not in the compute group of fan1 (as it uses a
># completely different system of values).
>#
>#
># VOLTAGE COMPUTATION DETAILS
># ---------------------------
># Most voltage sensors in sensor chips have a range of 0 to 4.096 Volts.
># This is generally sufficient for the 3.3 and CPU (2.5V, for example)
># supply voltages, so the sensor chip reading is the actual voltage.
>#
># Other supply voltages must be scaled with an external resistor network.
># The chip driver generally reports the 'raw' value 0 - 4.09 V, and the
># userspace application must convert this raw value to an actual voltage.
># The 'compute' lines provide this facility.
>#
># Unfortunately the resistor values vary among motherboard types.
># Therefore you may have to adjust the computations in this file
># to match your motherboard.
>#
># For positive voltages (in3, in4), two resistors are used, with the following
># formula (R1,R2: resistor values, Vs: read voltage, Vin: pin voltage)
>#	R1 = R2 * (Vs/Vin - 1)
># For negative voltages (in5, in6) two resistors are used, with the following
># formula (Rin,Rf: resistor values, Vs: read voltage, Vin: pin voltage)
>#	Rin = (Vs * Rf) / Vin
>#
># Note: Some chips use a different formula, see it87 section for example.
>#
># Here are the official LM78 and LM79 data sheet values.
># 	      Vs     R1,Rin   R2,Rf    Vin
># 	in3   +5.0      6.8    10     +2.98
># 	in4  +12.0     30      10     +3.00
># 	in5  -12.0    240      60     +3.00
># 	in6   -5.0    100      60     +3.00
>#
># These would lead to these declarations:
># 	compute in3 ((6.8/10)+1)*@ ,  @/((6.8/10)+1)
># 	compute in4 ((30/10)+1)*@  ,  @/((30/10)+1)
># 	compute in5 -(240/60)*@    ,  -@/(240/60)
># 	compute in6 -(100/60)*@    ,  -@/(100/60)
>#
># On almost any mainboard we have seen, the Winbond compute values lead to
># much better results, though.
>#
># 	      Vs     R1,Rin   R2,Rf    Vin
># 	in4  +12.0     28      10     +3.15
># 	in5  -12.0    210      60.4   +3.45
># 	in6   -5.0     90.9    60.4   +3.33
>#
># These leads to these declarations:
>#  	compute in3 ((6.8/10)+1)*@ ,  @/((6.8/10)+1)
>#  	compute in4 ((28/10)+1)*@  ,  @/((28/10)+1)
>#  	compute in5 -(210/60.4)*@  ,  -@/(210/60.4)
>#  	compute in6 -(90.9/60.4)*@ ,  -@/(90.9/60.4)
>#
># NOTE: On many motherboards, the -5V and -12V sensors are not connected.
># Add ignore lines so these readings will not be displayed. For example:
>#	ignore in5
>#	ignore in6
>#
>#
># TEMPERATURE COMPUTATION EXAMPLES
># --------------------------------
># There are two common ways to adjust temperature readings.
># One is to adjust by a constant. The other is to change the
># temperature sensor type.
>#
># Add 5 degrees to temperature sensor 1:
>#	compute temp1 @+5,@-5
>#
># Sensor type adjustments (certain chips only):
># ...Set temp1 to processor's thermal diode:
>#	set sensor1 1 (Winbond chips)
>#	set sensor1 3 (IT87xx and MTP008 chips)
>#
># ...Set temp1 sensor to 3904 transistor:
>#	set sensor1 2 (Winbond chips)
>#
># ...Set temp1 to thermistor:
>#	set sensor1 3435 (Winbond chips)
>#	set sensor1 2 (IT87xx and MTP008 chips)
>#
># Often, a temperature sensor is disconnected; disable it with an ignore line:
>#	ignore temp3
>#
>#
># SET LINES
># ---------
># Set statements set things like limits. Complete expressions can be
># used. Not everything can sensibly be set: setting 'in0', for example,
># is impossible! These settings are put through the compute translations;
># so if we specify '12.8' for in6, '3.2' will actually be written!
>#
># Important note: In the 'sensors' program, these only take effect
># after running 'sensors -s'!!!
>#
># Here are some examples:
>#
>#	set in0_max vid*1.05
>#	set in0_min vid*0.95
>#	set temp1_over 40
>#	set temp1_hyst 37
>#
># Think of tempx_over as 'alarm set' and tempx_hyst as 'alarm clear'
># thresholds. In most cases the 'over' value should be higher than
># the 'hyst' value by several degrees.
>#
># All the set statements from this file are commented out by default.
># The reason is that the proper limits are highly system-dependent,
># and writing improper limits may have all sorts of weird effects,
># from beeping to CPU throttling to instant reboot. If you want to
># actually set the limits, remove the comment marks.
>#
>#
># IGNORE LINES
># ------------
># Ignore statements tell certain features are not wanted. User programs can
># still read them if they really want, though; this is just an advisory
># marking. 'in0' would also invalidate 'in0_max' and 'in0_min'.
># 'ignore' does not disable anything in the actual sensor chip; it
># simply advises the user program to not access that data.
>#
>#	ignore in0
>#
>#
># STATEMENT ORDER
># ---------------
># Statements can go in any order, EXCEPT that some statements depend
># on others. Dependencies could be either in the library or the driver.
># A 'compute' statement must go before a 'set' statement
># for the same feature or else the 'set' won't be computed correctly.
># This is a library dependency.
># A 'set fan1_div' statement must go before a 'set fan1_min' statement,
># because the driver uses the divisor in calculating the minimum.
># Also, one should set vrm prior to using vid in any formula.
>#
>#
># BUS LINES
># ---------
># There is one other feature: the 'bus' statement. An example is below.
>#
>#	bus "i2c-0" "SMBus PIIX4 adapter at e800" "Non-I2C SMBus adapter"
>#
># If we refer from now on to 'i2c-0' in 'chip' lines, this will run-time
># be matched to this bus. So even if the PIIX4 is called 'i2c-5' at that
># moment, because five other adapters were detected first, 'i2c-0' in
># the config file would always only match this physical bus. In the above
># config file, this feature is not needed; but the next lines would
># only affect the LM75 chips on the PIIX4 adapter:
>#
>#	chip "lm75-i2c-0-*"
>#
># You should really use the output of /proc/bus/chips to generate bus lines,
># because one mistyped characted will inhibit the match. Wildcards are not
># yet supported; spaces at the end are ignored, though.
>#
>#
># BEEPS
># -----
># Some chips support alarms with beep warnings. When an alarm is triggered
># you can be warned by a beeping signal through your computer speaker. It
># is possible to enable beeps for all alarms on a chip using the following 
># line:
>#
># 	set beep_enable 1
>#
># or disable them using:
>#
># 	set beep_enable 0
>#
>#
>##########################################################################
>#### Here begins the real configuration file
>
>
>chip "lm78-*" "lm78-j-*" "lm79-*" "w83781d-*"
>
># These are as advised in the LM78 and LM79 data sheets, and used on almost
># any mainboard we have seen.
>
>    label in0 "VCore 1"
>    label in1 "VCore 2"
>    label in2 "+3.3V"
>    label in3 "+5V"
>    label in4 "+12V"
>    label in5 "-12V"
>    label in6 "-5V"
>
># For positive voltages (in3, in4), two resistors are used, with the following
># formula (R1,R2: resistor values, Vs: read voltage, Vin: pin voltage)
>#   R1 = R2 * (Vs/Vin - 1)
># For negative voltages (in5, in6) two resistors are used, with the following
># formula (Rin,Rf: resistor values, Vs: read voltage, Vin: pin voltage)
>#   Rin = (Vs * Rf) / Vin
>#
># Here are the official LM78 and LM79 data sheet values.
>#       Vs     R1,Rin   R2,Rf    Vin
># in3   +5.0      6.8    10     +2.98
># in4  +12.0     30      10     +3.00
># in5  -12.0    240      60     +3.00
># in6   -5.0    100      60     +3.00
>#
># These would lead to these declarations:
># compute in3 ((6.8/10)+1)*@ ,  @/((6.8/10)+1)
># compute in4 ((30/10)+1)*@  ,  @/((30/10)+1)
># compute in5 -(240/60)*@    ,  -@/(240/60)
># compute in6 -(100/60)*@    ,  -@/(100/60)
>#
># On almost any mainboard we have seen, the Winbond compute values lead to
># much better results, though.
>#
>#       Vs     R1,Rin   R2,Rf    Vin
># in4  +12.0     28      10     +3.15
># in5  -12.0    210      60.4   +3.45
># in6   -5.0     90.9    60.4   +3.33
>#
># These leads to these declarations:
>
>    compute in3 ((6.8/10)+1)*@ ,  @/((6.8/10)+1)
>    compute in4 ((28/10)+1)*@  ,  @/((28/10)+1)
>    compute in5 -(210/60.4)*@  ,  -@/(210/60.4)
>    compute in6 -(90.9/60.4)*@ ,  -@/(90.9/60.4)
>
># Here, we assume the VID readings are valid, and we use a max. 5% deviation
>
>#    set in0_min vid*0.95
>#    set in0_max vid*1.05
>#    set in1_min vid*0.95
>#    set in1_max vid*1.05
>#    set in2_min 3.3 * 0.95
>#    set in2_max 3.3 * 1.05
>#    set in3_min 5.0 * 0.95
>#    set in3_max 5.0 * 1.05
>#    set in4_min 12 * 0.95
>#    set in4_max 12 * 1.05
>#    set in5_max -12 * 0.95
>#    set in5_min -12 * 1.05
>#    set in6_max -5 * 0.95
>#    set in6_min -5 * 1.05
>
># Examples for lm78, lm78j, lm79 temperature limits
>#    set temp_over 40
>#    set temp_hyst 37
>
># Examples for w83781d temperature limits
>#    set temp1_over 40
>#    set temp1_hyst 37
>#    set temp2_over 52
>#    set temp2_hyst 47
>#    set temp3_over 52
>#    set temp3_hyst 47
>
># Examples of fan low speed limits
>#    set fan1_min 3000
>#    set fan2_min 3000
>#    set fan3_min 3000
>
># Ignore fans you don't actually have
>#    ignore fan1
>#    ignore fan2
>#    ignore fan3
>
># In case a lm78 is used together with a lm75, the lm78 temp sensor will
># generally show the M/B temperature while the lm75 temp sensor will show
># the CPU temperature.
>#    label temp "M/B Temp"
>
># Uncomment the following line to enable beeps for all alarms on this chip
>#    set beep_enable 1
>
>
>
>chip "lm75-*"
>
># Most boards don't need scaling. Following is for the Asus TX97-E.
>#   compute temp @*2.0, @/2.0
>
># Examples for temperature limits
>#    set temp_over 70	
>#    set temp_hyst 65	
>
># In case a lm75 is used together with a lm78, the lm78 temp sensor will
># generally show the M/B temperature while the lm75 temp sensor will show
># the CPU temperature.
>#    label temp "CPU Temp"
>
>
>chip "sis5595-*"
>
>    label in0 "VCore 1"
>    label in1 "VCore 2"
>    label in2 "+3.3V"
>    label in3 "+5V"
>    label in4 "+12V"
>
>    compute in3 ((6.8/10)+1)*@ ,  @/((6.8/10)+1)
>    compute in4 ((28/10)+1)*@  ,  @/((28/10)+1)
>
>#    set in0_min 2.0 * 0.95
>#    set in0_max 2.0 * 1.05
>#    set in1_min 2.0 * 0.95
>#    set in1_max 2.0 * 1.05
>#    set in2_min 3.3 * 0.95
>#    set in2_max 3.3 * 1.05
>#    set in3_min 5.0 * 0.95
>#    set in3_max 5.0 * 1.05
>#    set in4_min 12 * 0.95
>#    set in4_max 12 * 1.05
>
>#
># SiS5595 temperature calculation
># The driver currently includes a calculation due to the wide
># variation in thermistor types on SiS5595 motherboards.
># The driver currently has a calculation of t = (.83x + 52.12).
># One user reports the correct formula of t = (.345x - 12).
># So you want to put a compute line in sensors.conf that has
># the inverse of the driver formula, and put your formula on top of it.
># The inverse of the driver formula is x = (1.20t - 62.77)
># So the final formula is newt = (.345(1.20t - 62.77)) - 12).
># Put this in the sensors.conf file as
># compute temp ((.345 * ((1.20 * @) - 62.77)) - 12), ...
># where ... is the inverse function I leave to you.
>#
># Look in your 'Vendor.ini' file to see which one is present
># on your motherboard. Look for the line like:
>#	[Temp1]
>#	     ThermistorType     = NTC-10KC15-1608-1P
># Fix up a 'compute' line to match your thermistor type.
># Warning. You still don't have enough information to do this.
>#	     ThermistorType     = NTC-10KC15-1608-1P (10K at 25C; Beta = 3435)
>#   compute temp ((X * ((1.20 * @) - 62.77)) - Y), ...
>#	     ThermistorType     = NTC-103KC15-1608-1P  (??)
>#   compute temp ((X * ((1.20 * @) - 62.77)) - Y), ...
>#	     ThermistorType     = NTC-103AT-2 (10K at 25C; Beta = 3435)
>#   compute temp ((X * ((1.20 * @) - 62.77)) - Y), ...
>#	     ThermistorType     = NTC-103JT   (10K at 25C; Beta = 3435)
>#   compute temp ((X * ((1.20 * @) - 62.77)) - Y), ...
>
># examples for sis5595 temperature limits;
># for sis5595, temp_hyst is really the low limit, not a hysteresis value
>#    set temp_over 40
>#    set temp_hyst 37
>
>
>chip "w83782d-*" "w83627hf-*"
>
># Same as above for w83781d except that in5 and in6 are computed differently.
># Rather than an internal inverting op amp, the 82d/83s use standard positive
># inputs and the negative voltages are level shifted by a 3.6V reference.
># The math is convoluted, so we hope that your motherboard
># uses the recommended resistor values.
>
>    label in0 "VCore 1"
>    label in1 "VCore 2"
>    label in2 "+3.3V"
>    label in3 "+5V"
>    label in4 "+12V"
>    label in5 "-12V"
>    label in6 "-5V"
>    label in7 "V5SB"
>    label in8 "VBat"
>
># Abit BP6 motherboard has a few differences. VCore1 and VCore2 are the core
># voltages of the two processors. Vtt is memory bus termination resistors
># voltage.
>#    label in1 "Vtt"
>#    label in8 "VCore2"
>
>    compute in3 ((6.8/10)+1)*@ ,  @/((6.8/10)+1)
>    compute in4 ((28/10)+1)*@  ,  @/((28/10)+1)
>    compute in5 (5.14 * @) - 14.91  ,  (@ + 14.91) / 5.14
>    compute in6 (3.14 * @) -  7.71  ,  (@ +  7.71) / 3.14
>    compute in7 ((6.8/10)+1)*@ ,  @/((6.8/10)+1)
>
># adjust this if your vid is wrong; see doc/vid
>#   set vrm 9.0
>
># set limits to  5% for the critical voltages
># set limits to 10% for the non-critical voltages
># set limits to 20% for the battery voltage
>
>#    set in0_min vid*0.95
>#    set in0_max vid*1.05
>#    set in1_min vid*0.95
>#    set in1_max vid*1.05
>#    set in2_min 3.3 * 0.95
>#    set in2_max 3.3 * 1.05
>#    set in3_min 5.0 * 0.95
>#    set in3_max 5.0 * 1.05
>#    set in4_min 12 * 0.90
>#    set in4_max 12 * 1.10
>#    set in5_max -12 * 0.90
>#    set in5_min -12 * 1.10
>#    set in6_max -5 * 0.95
>#    set in6_min -5 * 1.05
>#    set in7_min 5 * 0.95
>#    set in7_max 5 * 1.05
>#    set in8_min 3.0 * 0.80
>#    set in8_max 3.0 * 1.20
>
># set up sensor types (thermistor is default)
># 1 = PII/Celeron Diode; 2 = 3904 transistor;
># 3435 = thermistor with Beta = 3435
># If temperature changes very little, try 1 or 2.
>#   set sensor1 1
>#   set sensor2 2
>#   set sensor3 3435
>
># examples for temperature limits
>#    set temp1_over 40
>#    set temp1_hyst 37
>#    set temp2_over 52
>#    set temp2_hyst 47
>#    set temp3_over 52
>#    set temp3_hyst 47
>
>
>chip "w83783s-*"
>
># Same as above for w83781d except that in5 and in6 are computed differently.
># Rather than an internal inverting op amp, the 82d/83s use standard positive
># inputs and the negative voltages are level shifted by a 3.6V reference.
># The math is convoluted, so we hope that your motherboard
># uses the recommended resistor values.
>
>    label in0 "VCore 1"
>    label in2 "+3.3V"
>    label in3 "+5V"
>    label in4 "+12V"
>    label in5 "-12V"
>    label in6 "-5V"
>
>    compute in3 ((6.8/10)+1)*@ ,  @/((6.8/10)+1)
>    compute in4 ((28/10)+1)*@  ,  @/((28/10)+1)
>    compute in5 (5.14 * @) - 14.91  ,  (@ + 14.91) / 5.14
>    compute in6 (3.14 * @) -  7.71  ,  (@ +  7.71) / 3.14
>
># adjust this if your vid is wrong; see doc/vid
>#   set vrm 9.0
>
># set limits to  5% for the critical voltages
># set limits to 10% for the non-critical voltages
># set limits to 20% for the battery voltage
>
>#   set in0_min vid*0.95
>#   set in0_max vid*1.05
>#   set in2_min 3.3 * 0.95
>#   set in2_max 3.3 * 1.05
>#   set in3_min 5.0 * 0.95
>#   set in3_max 5.0 * 1.05
>#   set in4_min 12 * 0.90
>#   set in4_max 12 * 1.10
>#   set in5_max -12 * 0.90
>#   set in5_min -12 * 1.10
>#   set in6_max -5 * 0.95
>#   set in6_min -5 * 1.05
>
># set up sensor types (thermistor is default)
># 1 = PII/Celeron Diode; 2 = 3904 transistor;
># 3435 = thermistor with Beta = 3435
># If temperature changes very little, try 1 or 2.
>#   set sensor1 1
>#   set sensor2 2
>
># examples for temperature limits
>#    set temp1_over 40
>#    set temp1_hyst 37
>#    set temp2_over 52
>#    set temp2_hyst 47
>
>
>chip "w83697hf-*"
>
># Same as above for w83781d except that in5 and in6 are computed differently.
># Rather than an internal inverting op amp, the 82d/83s use standard positive
># inputs and the negative voltages are level shifted by a 3.6V reference.
># The math is convoluted, so we hope that your motherboard
># uses the recommended resistor values.
>
># no in1 on this chip.
>
>    label in0 "VCore"
>    label in2 "+3.3V"
>    label in3 "+5V"
>    label in4 "+12V"
>    label in5 "-12V"
>    label in6 "-5V"
>    label in7 "V5SB"
>    label in8 "VBat"
>
># Tyan Trinity S2495 KT400 has a few differences. Thanks to Eric Schumann
># for proving this information. Same is true for Epox 8K3A and 8KHA+.
># Thanks to Thomas Schorpp for additional feedback.
>#    label in2 "VAgp"
>#    label in5 "+3.3V" # aka. Vio
>#    label in6 "Vdimm"
>#    label in7 "VBat"
>#    label in8 "V5SB"
>#
># You'll also want to comment out the in5 and in6 compute lines right below,
># and rename compute in7 to compute in8.
>
>    compute in3 ((6.8/10)+1)*@ ,  @/((6.8/10)+1)
>    compute in4 ((28/10)+1)*@  ,  @/((28/10)+1)
>    compute in5 (5.14 * @) - 14.91  ,  (@ + 14.91) / 5.14
>    compute in6 (3.14 * @) -  7.71  ,  (@ +  7.71) / 3.14
>    compute in7 ((6.8/10)+1)*@ ,  @/((6.8/10)+1)
>
># 697HF does not have VID inputs so you MUST set your core
># voltage limits below. Currently set for 1.8V core.
>#               vvv
>
>#   set in0_min 1.8 * 0.95
>#   set in0_max 1.8 * 1.05
>
>#   set in2_min 3.3 * 0.95
>#   set in2_max 3.3 * 1.05
>#   set in3_min 5.0 * 0.95
>#   set in3_max 5.0 * 1.05
>#   set in4_min 12 * 0.90
>#   set in4_max 12 * 1.10
>#   set in5_max -12 * 0.90
>#   set in5_min -12 * 1.10
>#   set in6_max -5 * 0.95
>#   set in6_min -5 * 1.05
>#   set in7_min 5 * 0.95
>#   set in7_max 5 * 1.05
>#   set in8_min 3.0 * 0.80
>#   set in8_max 3.0 * 1.20
>
># And for Tyan Trinity S2495 KT400 and Epox 8K3A and 8KHA+:
>#    set in2_min 1.5 * 0.95
>#    set in2_max 1.5 * 1.05
>#    set in5_min 3.3 * 0.95
>#    set in5_max 3.3 * 1.05
>#    set in6_min 2.5 * 0.95 # 2.6 on Epox
>#    set in6_max 2.5 * 1.05 # 2.6 on Epox
>#    set in7_min 3.0 * 0.90
>#    set in7_max 3.0 * 1.10
>#    set in8_min 5 * 0.90
>#    set in8_max 5 * 1.10
>
># set up sensor types (thermistor is default)
># 1 = PII/Celeron Diode; 2 = 3904 transistor;
># 3435 = thermistor with Beta = 3435
># If temperature changes very little, try 1 or 2.
>#   set sensor1 1
>#   set sensor2 2
>#   set sensor3 3435
>
># examples for temperature limits
>#    set temp1_over 40
>#    set temp1_hyst 37
>#    set temp2_over 52
>#    set temp2_hyst 47
>
>
>chip "w83627thf-*" "w83637hf-*"
>
># Rather than an internal inverting op amp, the 627thf uses standard positive
># inputs and the negative voltages are level shifted by a 3.6V reference
># (same as 82d/83s).
># The math is convoluted, so we hope that your motherboard
># uses the recommended resistor values.
># Note that in1 (+12V) is the usual in4, and in4 (-12V) is the usual in5.
># Data sheet is obviously wrong for in4, the usual formula should work.
># No in5 nor in6.
># sensors doesn't need the ignore lines but sensord does...
>    ignore in5
>    ignore in6
>
>    label in0 "VCore"
>    label in1 "+12V"
>    label in2 "+3.3V"
>    label in3 "+5V"
>    label in4 "-12V"
>    label in7 "V5SB"
>    label in8 "VBat"
>
># Mori Hiroyuki reported to need this (P4P800)
>#   compute in0 @/2, @*2
>
>    compute in1 ((28/10)+1)*@, @/((28/10)+1)
>    compute in3 ((34/51)+1)*@, @/((34/51)+1)
>    compute in4 (5.14*@)-14.91, (@+14.91)/5.14
>    compute in7 ((6.8/10)+1)*@ ,  @/((6.8/10)+1)
>
># adjust this if your vid is wrong; see doc/vid
>#   set vrm 9.0
>
># set limits to  5% for the critical voltages
># set limits to 10% for the non-critical voltages
># set limits to 20% for the battery voltage
># if your vid is wrong, you'll need to adjust in0_min and in0_max
>
>#   set in0_min vid * 0.95
>#   set in0_max vid * 1.05
>#   set in1_min 12 * 0.90
>#   set in1_max 12 * 1.10
>#   set in2_min 3.3 * 0.95
>#   set in2_max 3.3 * 1.05
>#   set in3_min 5.0 * 0.95
>#   set in3_max 5.0 * 1.05
>#   set in4_min -12 * 1.10
>#   set in4_max -12 * 0.90
>#   set in7_min 5 * 0.95
>#   set in7_max 5 * 1.05
>#   set in8_min 3.0 * 0.80
>#   set in8_max 3.0 * 1.20
>
># set up sensor types (thermistor is default)
># 1 = PII/Celeron Diode; 2 = 3904 transistor;
># 3435 = thermistor with Beta = 3435
># If temperature changes very little, try 1 or 2.
>#   set sensor1 1
>#   set sensor2 2
>#   set sensor3 3435
>
>    label temp1 "M/B Temp"
>    label temp2 "CPU Temp"
>#   ignore temp3
>
># examples for temperature limits
>#    set temp1_over 40
>#    set temp1_hyst 37
>#    set temp2_over 52
>#    set temp2_hyst 47
>#    set temp3_over 52
>#    set temp3_hyst 47
>
>#   ignore fan1
>    label fan2 "CPU Fan"
>#   ignore fan3
>
>
># Here are configurations for Winbond W83792AD/D chip.
>chip "w83792d-*"
>
>    label in0 "VCoreA"
>    label in1 "VCoreB"
>    label in2 "VIN0"
>    label in3 "VIN1"
>    label in4 "VIN2"
>    label in5 "VIN3"
>    label in6 "5VCC"
>    label in7 "5VSB"
>    label in8 "VBAT"
>    label fan1 "Fan1"
>    label fan2 "Fan2"
>    label fan3 "Fan3"
>    label fan4 "Fan4"
>    label fan5 "Fan5"
>    label fan6 "Fan6"
>    label fan7 "Fan7"
>    label temp1 "Temp1"
>    label temp2 "Temp2"
>    label temp3 "Temp3"
>
>#    set in0_min 1.4
>#    set in0_max 1.6
>#    set in1_min 1.4
>#    set in1_max 1.6
>#    set in2_min 3.2
>#    set in2_max 3.4
>#    set in3_min 3.1
>#    set in3_max 3.3
>#    set in4_min 1.4
>#    set in4_max 1.5
>#    set in5_min 2.6
>#    set in5_max 2.65
>#    set in6_min 5 * 0.95
>#    set in6_max 5 * 1.05
>#    set in7_min 5 * 0.95
>#    set in7_max 5 * 1.05
>#    set in8_min 3 * 0.95
>#    set in8_max 3 * 1.05
>
># fan1 adjustments examples
>
>#   set fan1_div 4
>#   set fan1_min 1500
>
># temp2 limits examples
>
>#    set temp2_over 42
>#    set temp2_hyst 37
>
># ignore examples
>
>#    ignore fan7
>#    ignore temp3
>
>
># Here are configurations for Winbond W83793 chip.
>chip "w83793-*"
>
>    label in0 "VCoreA"
>    label in1 "VCoreB"
>    label in2 "Vtt"
>    label in5 "+3.3V"
>    label in6 "+12V"
>    label in7 "+5V"
>    label in8 "5VSB"
>    label in9 "VBAT"
>
>    compute in6 12*@ ,  @/12
>
>    label temp1 "CPU1 Temp"
>    label temp2 "CPU2 Temp"
>    
># fan1 adjustments examples
>
>#   set fan1_min 1500
>
># temp2 limits examples
>
>#   set temp2_max       45
>#   set temp2_max_hyst  40
>
># ignore examples
>
>#    ignore fan7
>#    ignore temp3
>
>
>chip "as99127f-*"
>
># Asus won't release a datasheet so this is guesswork.
># Thanks to Guntram Blohm, Jack, Ed Harrison, Artur Gawryszczak,
># Victor G. Marimon and others for their feedback.
>
># Dual power plane
>    label in0 "VCore 1"
>    label in1 "VCore 2"
># Single power plane (A7V133, A7M266, CUV4X)
>#   label in0 "VCore"
>#   ignore in1
>
>    label in2 "+3.3V"
>    label in3 "+5V"
>    label in4 "+12V"
># These last two may not make sense on all motherboards.
>    label in5 "-12V"
>    label in6 "-5V"
>
>    compute in3 ((6.8/10)+1)*@ ,  @/((6.8/10)+1)
>    compute in4 ((28/10)+1)*@  ,  @/((28/10)+1)
># AS99127F rev.1 (same as w83781d)
>    compute in5 -(240/60.4)*@ ,  -@/(240/60.4)
>    compute in6 -(90.9/60.4)*@ ,  -@/(90.9/60.4)
># AS99127F rev.2 (same as w83782d)
>#   compute in5 (5.14 * @) - 14.91 , (@ + 14.91) / 5.14
>#   compute in6 (3.14 * @) -  7.71 , (@ +  7.71) / 3.14
>
># Depending on your motherboard, you may have to use any of two formulae
># for temp2. Quoting Artur Gawryszczak (edited to reflect subsequent fixes
># to the driver):
># "I guess, that the formula "(@*15/43)+25, (@-25)*43/15" is correct
># for those Asus motherboards, which get CPU temperature from internal 
># thermal diode (Pentium Coppermine, and above), while no formula is needed
># for Athlon/Duron boards, which use a thermistor in the socket."
># An alternative formula was then found and reported by Victor G. Marimon.
>
># Asus A7V133, Asus A7M266
>#   No compute line is needed
># Asus CUV4X, Asus A7V8X
>#   compute temp2 (@*15/43)+25, (@-25)*43/15
># Asus CUSL2, Asus CUV266-DLS, Asus TUSL2-C
>#   compute temp2 (@*30/43)+25, (@-25)*43/30
>
># See comments above if temp3 looks bad. What works for temp2 is likely
># to work for temp3 for dual-CPU boards, such as the CUV4X-D.
>
># Most Asus boards have temperatures settled like that:
>    label temp1 "M/B Temp"
>    label temp2 "CPU Temp"
># However, some boards have them swapped (A7N8X Deluxe rev.2,
># A7N8X-E Deluxe rev.2, CUV4X):
>#   label temp1 "CPU Temp"
>#   label temp2 "M/B Temp"
>
># Most boards have no temp3 by default, except for dual-CPU boards.
>#   label temp3 "CPU 2 Temp"
>#   ignore temp3
>
># adjust this if your vid is wrong; see doc/vid
>#   set vrm 9.0
>
># set limits to  5% for the critical voltages
># set limits to 10% for the non-critical voltages
># set limits to 20% for the battery voltage
>
>#    set in0_min vid*0.95
>#    set in0_max vid*1.05
>#    set in1_min vid*0.95
>#    set in1_max vid*1.05
>#    set in2_min 3.3 * 0.95
>#    set in2_max 3.3 * 1.05
>#    set in3_min 5.0 * 0.95
>#    set in3_max 5.0 * 1.05
>#    set in4_min 12 * 0.90
>#    set in4_max 12 * 1.10
>#    set in5_max -12 * 0.90
>#    set in5_min -12 * 1.10
>#    set in6_max -5 * 0.95
>#    set in6_min -5 * 1.05
>
># examples for temperature limits
>#    set temp1_over 40
>#    set temp1_hyst 37
>#    set temp2_over 52
>#    set temp2_hyst 47
>#    set temp3_over 52
>#    set temp3_hyst 47
>
>
>chip "gl518sm-*"
>
># IMPORTANT: in0, in1, and in2 values (+5, +3, and +12) CANNOT be read
>#            unless you use the slow 'iterate' method. Limits will still
>#            work even when iterate=0. See doc/chips/gl518sm.
>#            Note that the 'iterate' method was trimmed while porting the
>#            driver to Linux 2.6 as we considered it too ugly for the thin
>#            benefit.
>#
># Factors and labels taken from GL518SM datasheet, they seem to give
># reasonable values with EISCA connected Fan78
>
>  label vdd "+5V"
>  label vin1 "+3.3V"
>  label vin2 "+12V"
>  label vin3 "Vcore"
>
># vin2 depends on external resistors (4,7k and 15k assumed here)
># vin1 and vin3 require no scaling
>
>  compute vin2 (197/47)*@  ,  @/(197/47)
>
>#  set vdd_min 4.8
>#  set vdd_max 5.2
>#  set vin1_min 3.20
>#  set vin1_max 3.40
>#  set vin2_min 11.0
>#  set vin2_max 13.0
>#  set vin3_min 2.10
>#  set vin3_max 2.30
>#  set fan1_off 0
>#  set fan2_min 0
>
># Do NOT uncomment the following line with the Linux 2.6 kernel driver,
># as it'll raise an error.
># set iterate 2
>
>
>chip "gl520sm-*"
>
># Factors and labels taken from GL520SM datasheet
>
># The GL520SM has two application modes. In mode 1 it has two thermistor
># inputs, in mode 2 it has only one and an extra (negative) voltage input.
># The mode is supposed to be set properly by your BIOS so you should not
># need to change it. You can force it below if really needed though.
># Note that this means that you have either temp2 or vin4 but never both
># at the same time.
>
># set two_temps 1
>
>  label vdd "+5V"
>  label vin1 "+3.3V"
>  label vin2 "+12V"
>  label vin3 "Vcore"
>  label vin4 "-12V"
>
># vin1 and vin3 require no scaling
># vin2 depends on external resistors (4,7k and 15k assumed)
>
># vin4 = ((R1+R2)/R2)*@ - (R1/R2)*vdd
>#
>#       -12 --| R1 |---t---| R2 |-- +5
>#                      |
>#                    vin4
>#
>
>  compute vin2 (197/47)*@  ,  @/(197/47)
>  compute vin4 (5*@)-(4*vdd) , (@+4*vdd)/5
>
>#  set vdd_min 4.8
>#  set vdd_max 5.2
>#  set vin1_min 3.20
>#  set vin1_max 3.40
>#  set vin2_min 11.0
>#  set vin2_max 13.0
>#  set vin3_min 2.10
>#  set vin3_max 2.30
>
>
>chip "lm80-*"
>
># The values below should be correct if you own a qdi BX (brilliant1)
># mainboard. If not, please contact us, so we can figure out better readings.
># Many thanks go to Peter T. Breuer <ptb@it.uc3m.es> for helping us figure
># out how to handle the LM80.
>
># For positive voltages (in0..in4), two resistors are used, with the following
># formula (R1,R2: resistor values, Vs: read voltage, Vin: pin voltage)
>#   R1 = R2 * (Vs/Vin - 1)
># For negative voltages (in5, in6) two resistors are used, with the following
># formula (R3,R4: resistor values, Vs: read voltage, Vin: pin voltage,
># V5: +5V)
>#   R3 = R4 * (Vs - Vin) / (Vin - V5)
>
># Here are the official LM80 data sheet values.
>#       Vs      R1,R3   R2,R4    Vin
>#       +2.5V    23.7    75     +1.9
>#       +3.3V    22.1    30     +1.9
>#       +5.0     24      14.7   +1.9
>#      +12.0    160      30.1   +1.9
>#      -12.0    160      35.7   +1.9
>#       -5.0     36      16.2   +1.9
>
># Now curiously enough, VCore is connected with (unknown) resistors, which
># translate a +2.8V to +1.9V. So we use that in the computations below.
>
>    label in0 "+5V"
>    label in1 "VTT"
>    label in2 "+3.3V"
>    label in3 "+Vcore"
>    label in4 "+12V"
>    label in5 "-12V"
>    label in6 "-5V"
>
>    compute in0 (24/14.7 + 1) * @ ,       @ / (24/14.7 + 1)
>    compute in2 (22.1/30 + 1) * @ ,       @ / (22.1/30 + 1)
>    compute in3 (2.8/1.9) * @,            @ * 1.9/2.8
>    compute in4 (160/30.1 + 1) * @,       @ / (160/30.1 + 1)
>    compute in5 (160/35.7)*(@ - in0) + @, (@ + in0 * 160/35.7)/ (1 + 160/35.7)
>    compute in6 (36/16.2)*(@ - in0) + @,  (@ + in0 * 36/16.2) / (1 + 36/16.2)
>
>#    set in0_min 5 * 0.95
>#    set in0_max 5 * 1.05
># What is your VTT? It is probably not this value...
>#    set in1_min 2*0.95
>#    set in1_max 2*1.05
>#    set in2_min 3.3 * 0.95
>#    set in2_max 3.3 * 1.05
># What is your VCore? It is probably not this value...
>#    set in3_min 1.9 * 0.95
>#    set in3_max 1.9 * 1.05
>#    set in4_min 12 * 0.95
>#    set in4_max 12 * 1.05
>#    set in5_min -12 * 1.05
>#    set in5_max -12 * 0.95
>#    set in6_min -5 * 1.05
>#    set in6_max -5 * 0.95
>
># examples for lm80 temperature limits
># WARNING - nonstandard names and functions for the lm80!!!
># All 4 of these limits apply to the single temperature sensor.
># "hot" is like the standard alarm for most chips.
># "os" is the threshold for the overtemperature shutdown output.
># "os" may or may not do anything on your motherboard but it should
>#  be set higher than the "hot" thresholds.
># Note that the /proc file 'temp" also has five entries instead of
># the usual three.
>#    set temp_hot_hyst 45
>#    set temp_hot_max  52
>#    set temp_os_hyst  57
>#    set temp_os_max   62
>
>
>chip "maxilife-cg-*" "maxilife-co-*" "maxilife-as-*"
>
>   label fan1  "HDD Fan"
>   label fan2  "PCI Fan"
>   label fan3  "CPU Fan"
>   ignore fan4
>
>   label temp2 "PCI Temp"
>   label temp4 "HDD Temp"
>   label temp5 "CPU Temp"
>   ignore temp6
>
>   label vid1  "V+12"
>   ignore vid5
>
># vid1 need to be scaled by 6.337 other voltages
># require no scaling
>
>   compute vid1 6.337*@ , @/6.337
>
>
>chip "maxilife-cg-*"
>
>   ignore temp1
>   label temp3  "BX Temp"
>
>   label vid2   "Vcpu1"
>   label vid3   "Vcpu2"
>   ignore vid4
>
>
>chip "maxilife-co-*"
>
>   label temp1  "CPU 1 Temp"
>   label temp3  "CPU 2 Temp"
>
>   label vid2   "Vcpu1"
>   label vid3   "Vcpu2"
>   label vid4   "VcacheL2"
>
>
>chip "maxilife-as-*"
>
>   ignore temp1
>   ignore temp3
>
>   label vid2   "Vcpu"
>   ignore vid3
>   ignore vid4
>
>
>chip "maxilife-nba-*"
>
>   label fan1  "CPU Fan"
>   label fan2  "PCI Fan"
>   label fan3  "HDD Fan"
>   label fan4  "Heat Sink Fan"
>
>   label temp1  "CPU 1 Temp"
>   label temp2  "CPU 2 Temp"
>   label temp3  "PCI/Ambient Temp"
>   label temp4  "HDD Temp"
>   label temp5  "Motherboard Temp"
>   label temp6  "CPU Reference Temp"
>
>   label vid1  "V+12"
>   label vid2  "Vcpu1"
>   label vid3  "Vcpu2"
>   label vid4  "VcacheL2"
>   label vid5  "V-12"
>
>
>chip "via686a-*"
>
># VIA is very specific about the voltage sensor inputs, and our labels
># reflect what they say.  Unfortunately, they are not at all specific about
># how to convert any of the register values to real units.  Fortunately,
># Jonathan Yew <j.teh@iname.com> and Alex van Kaam <darkside@chello.nl>
># came through with some data for temp conversion and formulae for voltage
># conversion. However, the conversions should be regarded as our best guess-
># YMMV.
>
># On the Tyan S1598, the 2.5V sensor reads 0 and is not displayed in the BIOS.
># Linas Vepstas <linas@linas.org> reports that this sensor shows nothing of
># interest on the Abit KA7 (Athlon), and is also not displayed in the BIOS.
># Likewise, Johannes Drechsel-Burkhard <jdb@chello.at> reports that this
># sensor is unavailable in the BIOS of his MSI K7T Pro (Thunderbird).  So,
># if you have one of these boards you may want to uncomment the 'ignore 2.5V'
># line below.
>
>    label "2.0V" "CPU core"
>    label "2.5V" "+2.5V"
>    #ignore "2.5V"
>    label "3.3V" "I/O"
>    label "5.0V" "+5V"
>    label "12V" "+12V"
>
>    label fan1  "CPU Fan"
>    label fan2  "P/S Fan"
>
># VIA suggests that temp3 is an internal temp sensor for the 686a.  However,
># on the Tyan S1598 as well as the Abit KA7 (Athalon), the absolute values
># of the readings from that sensor are not valid.  The readings do seem to
># correlate with temp changes, but the conversion factor may be quite
># different from temp1 & temp2 (as noted above, VIA has not provided
># conversion info).  So, you may wish to 'ignore temp3'.
>
># Johannes Drechsel-Burkhard <jdb@chello.at> notes that on his MSI K7T Pro,
># temp1 is the CPU temp and temp2 is the SYS temp. Hugo van der Merwe notes
># the same for his Gigabyte GA-7DXC, Olivier Martin for his Gigabyte
># GA-7ZM and Patrick Thomson for his Chaintech CT-5ATA. 
># Thomas Anglmaier notes: on Epox EP-7kxa temp2 is CPU and temp1 is SYS.
>
>    label temp1 "SYS Temp"
>    label temp2 "CPU Temp"
>    label temp3 "SBr Temp"
>    #ignore temp3
>
># Set your CPU core limits here if the BIOS did not.
>
>    #set in0_min 1.70 * 0.95
>    #set in0_max 1.70 * 1.05
>
># Other voltage values are standard so we can enforce the limits.
>
>#    set in1_min 2.5 * 0.95
>#    set in1_max 2.5 * 1.05
>#    set in2_min 3.3 * 0.95
>#    set in2_max 3.3 * 1.05
>#    set in3_min 5 * 0.9
>#    set in3_max 5 * 1.1
>#    set in4_min 12 * 0.9
>#    set in4_max 12 * 1.1
>
># Set your temp limits here.  Remember, 'tempX_over' is the temp at which an
># alarm is triggered, and 'tempX_hyst' is the temp at which an alarm turns off.
># Setting tempX_hyst to a few degrees below the corresponding tempX_over
># prevents an oscillation between alarm on and off states.  This kind of
># oscillation is known as hyteresis, thus the name.  (You typically get the
># most serious and troublesome hysteresis when a sensor triggers something to
># reduce the temp, thus creating a negative feedback loop.  Even without that,
># we would still get some oscillation when the temp hovers around the limit
># due to noise.)
>
>#    set temp1_hyst 40
>#    set temp1_over 45
>#    set temp2_hyst 55
>#    set temp2_over 60
>#    set temp3_hyst 60
>#    set temp3_over 65
>
># You could set your fan limits too, but the defaults should be fine.
>
>    #set fan1_min 5000
>    #set fan2_min 5000
>
>
>chip "mtp008-*"
>
># The values below should be correct if you own a Tyan S1834D motherboard.
># If not, please contact us, so we can figure out better readings.
># FOR TYAN S2510 SEE END OF THIS SECTION.
>
># For positive voltages outside the 0..4.09V range (in2..in4), two resistors
># are used, with the following formula (R1,R2: resistor values, Vs: read
># voltage, Vin: pin voltage)
>#   Vin = Vs * (R2 / (R1 + R2))
># For negative voltages (in5) two resistors are used, with the following
># formula (R3,R4: resistor values, Vs: read voltage, Vin: pin voltage)
>#   Vin = ((4.096 - Vs) * (R3 / (R3 + R4))) + Vs
>
># Here are the official MTP008 data sheet values:
>#       Vs      R1,R3   R2,R4    Vin
>#      +12.0    28000   10000   +3.16
>#      -12.0   232000   56000   +0.96
>#       -5.0   120000   56000   +1.20
>
>    label in0 "VCore1"
>    label in1 "+3.3V"
>    label in2 "+12V"
>    label in3 "Vcore2"
>    ignore in4
>    label in5 "-12V"
>    label in6 "Vtt"
>
>    label fan1 "CPU1 Fan"
>    label fan2 "CPU2 Fan"
>    label fan3 "fan3"
>
>    label temp1 "CPU1 Temp"
>    label temp2 "CPU2 Temp"
>    ignore temp3
>
>    compute in2 @ * 38 / 10,		@ * 10 / 38
>    compute in5 (@ * 36 - 118.61) / 7,	(118.61 + 7 * @) / 36
>
># examples for temperature limits
>#    set temp1_over 40
>#    set temp1_hyst 37
>#    set temp2_over 52
>#    set temp2_hyst 47
>#    set temp3_over 52
>#    set temp3_hyst 47
>
># End of standard mtp008 configuration
>
># TYAN S2510 INFORMATION
># This motherboard has two mtp008's which are hooked up differently,
># so they must be configured separately.
># For this motherboard, COMMENT OUT the above mtp008 section and
># UNCOMMENT the following two sections.
>#
>#chip "mtp008-i2c-*-2c"
>#    label in0 "VCore1"
>#    set in0_min 1.60
>#    set in0_max 1.80
>#    label in1 "+3.3V"
>#    label in2 "+12V"
>#    label in3 "Vcore2"
>#    set in3_min 1.60
>#    set in3_max 1.80
>#    ignore in4
>#    label in5 "-12V"
>#    label in6 "Vtt"
>#    label fan1 "CPU1 Fan"
>#    label fan2 "CPU2 Fan"
>#    label fan3 "fan3"
>#    label temp1 "CPU1 Temp"
>#    label temp2 "CPU2 Temp"
>#    ignore temp3
>#    compute in2 @ * 38 / 10,		@ * 10 / 38
>#    compute in5 (@ * 36 - 118.61) / 7,	(118.61 + 7 * @) / 36
>#
>#chip "mtp008-i2c-*-2e"
>#    ignore in0
>#    label in1 "+3.3V"
>#    ignore in2
>#    label in3 "+5V"
>#    set in3_min 4.50
>#    set in3_max 5.50
>#    ignore in4
>#    label in5 "+3.3V"
>#    ignore in6
>#    label fan1 "fan4"
>#    label fan2 "fan5"
>#    label fan3 "fan6"
>#    ignore temp1
>#    label temp2 "MB Temp"
>#    set temp2_over 52
>#    set temp2_hyst 47
>#    ignore temp3
>
>chip "adm1025-*" "ne1619-*"
>
># The ADM1025 has integrated scaling resistors, rather
># than external resistors common to most sensor devices.
># These apply to the 6 voltage inputs in0-in5 (+2.5V, VCore,
># +3.3V, +5V, +12V, VCC). As the scaling is fixed inside
># the chip for these inputs, it is fairly certain that the
># motherboard connections match these labels, and that the
># driver computations are correct. Therefore they do not need to
># be overridden here.
>
>    label in0 "+2.5V"
>    label in1 "VCore"
>    label in2 "+3.3V"
>    label in3 "+5V"
>    label in4 "+12V"
>    label in5 "VCC"
>
># Adjust this if your vid is wrong; see doc/vid
>#   set vrm 9.0
>
># Tolerate a 5% deviance for CPU power-supply
>#    set in1_min vid * 0.95
>#    set in1_max vid * 1.05
># Tolerate a 10% deviance for other voltages
>#    set in0_min 2.5 * 0.90
>#    set in0_max 2.5 * 1.10
>#    set in2_min 3.3 * 0.90
>#    set in2_max 3.3 * 1.10
>#    set in3_min 5.0 * 0.90
>#    set in3_max 5.0 * 1.10
>#    set in4_min 12 * 0.90
>#    set in4_max 12 * 1.10
>#    set in5_min 3.3 * 0.90
>#    set in5_max 3.3 * 1.10
>
># Depending on how your chipset is hardwired, you may or may not have
># +12V readings (will show as 0.0V if you don't have it).
>#   ignore in4
>
># VCC is the power-supply voltage of the ADM1025 chipset, generally
># redundant with +3.3V so you may want to hide it.
>#   ignore in5
>
># Temperatures
>    label temp1 "CPU Temp"
>    label temp2 "M/B Temp"
>#    set temp1_low 10
>#    set temp1_high 60
>#    set temp2_low 10
>#    set temp2_high 45
>
>
>chip "lm87-*"
>#
># The LM87 has integrated scaling resistors, rather
># than external resistors common to most sensor devices.
># These apply to the first 6 voltage inputs in0-in5
># (+2.5, Vccp1, +3.3, +5, 12, +Vccp2). As the scaling is fixed inside
># the chip for these inputs, it is fairly certain that the
># motherboard connections match these labels, and that the
># driver computations are correct. Therefore they do not need to
># be overridden here.
>#
># Note: AIN1 (-12?), AIN2 (-5?) and temp3 require changing
># #defines in the driver and recompiling!!!
># This does not apply to the Linux 2.6 driver.
>#
># This chip has non-standard entries in lib/chips.c so
># the feature names are quite different from other chips.
># For this chip, libsensors anticipates the correct labeling.
># This is great if it's correct but makes it a little more
># difficult if you want to change it.
>#
># This may not have been a good idea, so it may be changed in the future.
># Here is an entry with everything commented out so you can
># uncomment the appropriate line if you want to change it.
>#
># Warning - feature names starting with a number must be enclosed
># with double quotes.
>
>   label "2.5V"  "+2.5V"
>   label Vccp1   "VCore"
>   label "3.3V"  "+3.3V"
>   label "5V"    "+5V"
>   label "12V"   "+12V"
>#   label Vccp2   "VCore2"
>
>   label fan1 "CPU Fan"
>#   label fan2 "Case Fan"
>   label temp1 "M/B Temp"
>   label CPU_Temp "CPU Temp"
>#   label temp3 "AUX Temp"
>
>#   set Vccp1_min    vid * 0.95
>#   set Vccp1_max    vid * 1.05
>#   set "3.3V_min"   3.3 * 0.92
>#   set "3.3V_max"   3.3 * 1.08
>#   set "5V_min"       5 * 0.92
>#   set "5V_max"       5 * 1.08
>#   set "12V_min"     12 * 0.90
>#   set "12V_max"     12 * 1.10
>
># These ones are mutually exclusive with temp3. If you have temp3,
># comment out these lines as they will trigger errors on "sensors -s".
>#   set "2.5V_min"   2.5 * 0.92
>#   set "2.5V_max"   2.5 * 1.08
>#   set Vccp2_min    vid * 0.95
>#   set Vccp2_max    vid * 1.05
>
># Increase fan clock dividers if your fans read 0 RPM while you know
># they are connected and running.
>#   set fan1_div 4
>#   set fan2_div 4
>
>#   set fan1_min 3000
>#   set fan2_min 3000
>
>#   set temp1_min   5
>#   set temp1_max  65
>#   set temp2_min   5
>#   set temp2_max  70
>
># Uncomment if you actually have temp3 (which means you don't have 2.5V
># nor Vccp2, as they are mutually exclusive).
>#   set temp3_min   5
>#   set temp3_max  70
>
># LM87 AIN1 and AIN2 Section
># As described above, the driver must be recompiled to use either or
># both of these. -12 and -5 may be reversed on your board, this is
># just a guess, the datasheet gives no guidance.
># Note that the Linux 2.6 driver needs no recompilation, it'll read the
># configuration from the chip.
>#   label AIN1 "-12V"
>#   label AIN2 "-5V"
>#   set AIN1_min -12 * 0.95
>#   set AIN2_min -5 * 0.95
>#   set AIN1_max -12 * 1.05
>#   set AIN2_max -5 * 1.05
>#   compute AIN1 (7.50 * @) - 21.45  ,  (@ + 21.45) / 7.50
>#   compute AIN2 (4.05 * @) - 10.07  ,  (@ + 10.07) / 4.05
>
>chip "adm9240-*" "ds1780-*" "lm81-*"
>#
># These chips have non-standard entries in lib/chips.c so
># the feature names are quite different from other chips.
># For these chips, libsensors anticipates the correct labeling.
># This is great if it's correct but makes it a little more
># difficult if you want to change it.
>#
># This may not have been a good idea, so it may be changed in the future.
># Here is an entry with everything commented out so you can
># uncomment the appropriate line if you want to change it.
>#
># Warning - feature names starting with a number must be enclosed
># with double quotes.
>#
>#   label "2.5V" "xxx"
>#   label Vccp1 "xxx"
>#   label "3.3V" "xxx"
>#   label "5V" "xxx"
>#   label "12V" "xxx"
>#   label Vccp2 "xxx"
>#   label fan1 "xxx"
>#   label fan2 "xxx"
>#   label temp "xxx"
>#
>#   set Vccp1_min xxx
>#   set "2.5V_min" xxx
>#   set "3.3V_min" xxx
>#   set "5V_min" xxx
>#   set "12V_min" xxx
>#   set Vccp2_min xxx
>#
>#   set Vccp1_max xxx
>#   set "2.5V_max" xxx
>#   set "3.3V_max" xxx
>#   set "5V_max" xxx
>#   set "12V_max" xxx
>#   set Vccp2_max xxx
>#
>#   set fan1_div xxx	Note: do not uncomment with kernel 2.6 driver
>#   set fan2_div xxx	Note: do not uncomment with kernel 2.6 driver
>#   set fan1_min xxx
>#   set fan2_min xxx
>#   set temp1_hyst xxx
>#   set temp1_over xxx
>
>#   compute "2.5V" xxx
>#   compute Vccp1 xxx
>#   compute "3.3V" xxx
>#   compute "5V" xxx
>#   compute "12V" xxx
>#   compute Vccp2 xxx
>#   compute temp xxx
>
>chip "adm1024-*"
>#
># These settings work for me, adjust for your system
>#
>    label fan1 "CPU1 fan"
>    label fan2 "CPU2 fan"
>    label temp "SYS Temp"
>    label temp1 "CPU2 Temp"
>    label temp2 "CPU1 Temp"
>    ignore "2.5V" # This register is also used for temp2
>    ignore "Vccp1"
>    ignore "Vccp2"
>
>
>chip "it87-*" "it8712-*"
>
># The values below have been tested on Asus CUSI, CUM motherboards.
>
># Voltage monitors as advised in the It8705 data sheet
>
>    label in0 "VCore 1"
>    label in1 "VCore 2"
>    label in2 "+3.3V"
>    label in3 "+5V"
>    label in4 "+12V"
>    label in5 "-12V"
>    label in6 "-5V"
>    label in7 "Stdby"
>    label in8 "VBat"
>
>    # vid is not monitored by IT8705F
>    # comment out if you have IT8712
>    ignore  vid
>
># Incubus Saturnus reports that the IT87 chip on Asus A7V8X-X seems
># to report the VCORE voltage approximately 0.05V higher than the board's
># BIOS does. Although it doesn't make much sense physically, uncommenting
># the next line should bring the readings in line with the BIOS' ones in
># this case.
># compute in0 -0.05+@ , @+0.05
>
># If 3.3V reads around 1.65V, uncomment the following line:
>#    compute in2   2*@ , @/2
>
>    compute in3 ((6.8/10)+1)*@ ,  @/((6.8/10)+1)
># A number of Gigabyte boards (GA-8IPE1000Pro, GA-8KNXP, GA-7N400-L) use
># a different resistor combination for +5V:
>#    compute in3 ((10/10)+1)*@ ,  @/((10/10)+1)
>
>    compute in4 ((30/10) +1)*@  , @/((30/10) +1)
># For this family of chips the negative voltage equation is different from
># the lm78.  The chip uses two external resistor for scaling but one is
># tied to a positive reference voltage.  See ITE8705/12 datasheet (SIS950
># data sheet is wrong)
># Vs = (1 + Rin/Rf) * Vin - (Rin/Rf) * Vref.
># Vref = 4.096 volts, Vin is voltage measured, Vs is actual voltage.
>
># The next two are negative voltages (-12 and -5).
># The following formulas must be used. Unfortunately the datasheet
># does not give recommendations for Rin, Rf, but we can back into
># them based on a nominal +2V input to the chip, together with a 4.096V Vref.
># Formula:
>#    actual V = (Vmeasured * (1 + Rin/Rf)) - (Vref * (Rin/Rf))
>#    For -12V input use Rin/Rf = 6.68
>#    For -5V input use Rin/Rf = 3.33
># Then you can convert the forumula to a standard form like:
>    compute in5 (7.67 * @) - 27.36  ,  (@ + 27.36) / 7.67
>    compute in6 (4.33 * @) - 13.64  ,  (@ + 13.64) / 4.33
>#
># this much simpler version is reported to work for a
># Elite Group K7S5A board
>#
>#   compute in5 -(36/10)*@, -@/(36/10)
>#   compute in6 -(56/10)*@, -@/(56/10)
>#
>    compute in7 ((6.8/10)+1)*@ ,  @/((6.8/10)+1)
>
>#    set in0_min 1.5 * 0.95
>#    set in0_max 1.5 * 1.05
>#    set in1_min 2.4
>#    set in1_max 2.6
>#    set in2_min 3.3 * 0.95
>#    set in2_max 3.3 * 1.05
>#    set in3_min 5.0 * 0.95
>#    set in3_max 5.0 * 1.05
>#    set in4_min 12 * 0.95
>#    set in4_max 12 * 1.05
>#    set in5_max -12 * 0.95
>#    set in5_min -12 * 1.05
>#    set in6_max -5 * 0.95
>#    set in6_min -5 * 1.05
>#    set in7_min 5 * 0.95
>#    set in7_max 5 * 1.05
>    #the chip does not support in8 min/max
>
># Temperature
>#
># Important - if your temperature readings are completely whacky
># you probably need to change the sensor type.
># Adujst and uncomment the appropriate lines below.
># The old method (modprobe it87 temp_type=0xXX) is no longer supported.
>#
># 2 = thermistor; 3 = thermal diode; 0 = unused
>#   set sensor1 3
>#   set sensor2 3
>#   set sensor3 3
># If a given sensor isn't used, you will probably want to ignore it
># (see ignore statement right below).
>
>    label temp1       "M/B Temp"
>#    set   temp1_over  40
>#    set   temp1_low   15
>    label temp2       "CPU Temp"
>#    set   temp2_over  45
>#    set   temp2_low   15
>#   ignore temp3
>    label temp3       "Temp3"
>#    set   temp3_over  45
>#    set   temp3_low   15
>
># The A7V8X-X has temperatures inverted, and needs a conversion for
># CPU temp. Thanks to Preben Randhol for the formula.
>#   label temp1       "CPU Temp"
>#   label temp2       "M/B Temp"
>#   compute temp1     (-15.096+1.4893*@), (@+15.096)/1.4893
>
># The A7V600 also has temperatures inverted, and needs a different
># conversion for CPU temp. Thanks to Dariusz Jaszkowski for the formula.
>#   label temp1       "CPU Temp"
>#   label temp2       "M/B Temp"
>#   compute temp1     (@+128)/3, (3*@-128)
>
># Fans
>#   set fan1_min 0
>#   set fan2_min 3000
>#   ignore fan3
>#   set fan3_min 3000
>
># The following is for the Inside Technologies 786LCD which uses either a
># IT8705F or a SIS950 for monitoring with the SIS630.
>#
># delete or comment out above it87 section and uncomment the following.
>#chip "it87-*"
>#    label in0 "VCore 1"
>#    label in1 "VCore 2"
>#    label in2 "+3.3V"
>#    label in3 "+5V"
>#    label in4 "+12V"
>#    label in5 "3.3 Stdby"
>#    label in6 "-12V"
>#    label in7 "Stdby"
>#    label in8 "VBat"
>    # in0 will depend on your processor VID value, set to voltage specified in
>    # bios setup screen
>#    set in0_min 1.7 * 0.95
>#    set in0_max 1.7 * 1.05
>#    set in1_min 2.4
>#    set in1_max 2.6
>#    set in2_min 3.3 * 0.95
>#    set in2_max 3.3 * 1.05
>#    set in3_min 5.0 * 0.95
>#    set in3_max 5.0 * 1.05
>    # +- 12V are very poor tolerance on this board. Verified with voltmeter
>#    set in4_min 12 * 0.90
>#    set in4_max 12 * 1.10
>#    set in5_min 3.3 * 0.95
>#    set in5_max 3.3 * 1.05
>#    set in6_max -12 * 0.90
>#    set in6_min -12 * 1.10
>#    set in7_min 5 * 0.95
>#    set in7_max 5 * 1.05
>    # vid not monitored by IT8705F
>#    ignore  vid
>
>#    compute in3 ((6.8/10)+1)*@ ,  @/((6.8/10)+1)
>#    compute in4 ((30/10) +1)*@  , @/((30/10) +1)
>#    compute in6 (1+232/56)*@ - 4.096*232/56, (@ + 4.096*232/56)/(1+232/56)
>#    compute in7 ((6.8/10)+1)*@ ,  @/((6.8/10)+1)
>    # Temperature
>#    label temp1       "CPU Temp"
>#    ignore temp2
>#    ignore temp3
>    # Fans
>#    set fan1_min 3000
>#    ignore fan2
>#    ignore fan3
>
>
>chip "it8716-*"
>
># Voltages
>
>    label  in0  "VCore"
>    label  in1  "VDDR"
>    label  in2  "+3.3V"    # VCC3
>    label  in3  "+5V"      # VCC
>    label  in4  "+12V"
>#   label  in5  "-12V"
>#   label  in6  "-5V"
>    label  in7  "5VSB"     # VCCH
>    label  in8  "VBat"
>
>    compute in3  ((6.8/10)+1)*@ , @/((6.8/10)+1)
>    compute in4  ((30/10)+1)*@  , @/((30/10)+1)
>#   compute in5  (1+232/56)*@ - 4.096*232/56 , (@ + 4.096*232/56)/(1+232/56)
>#   compute in6  (1+120/56)*@ - 4.096*120/56 , (@ + 4.096*120/56)/(1+120/56)
>    compute in7  ((6.8/10)+1)*@ , @/((6.8/10)+1)
>
># If vid (nominal CPU voltage) isn't correct, hardcode the correct value
># instead.
>#    set in0_min  vid * 0.95
>#    set in0_max  vid * 1.05
>#    set in1_min  1.8 * 0.95
>#    set in1_max  1.8 * 1.05
>#    set in2_min  3.3 * 0.95
>#    set in2_max  3.3 * 1.05
>#    set in3_min    5 * 0.95
>#    set in3_max    5 * 1.05
>#    set in4_min   12 * 0.95
>#    set in4_max   12 * 1.05
>#    set in5_max  -12 * 0.95
>#    set in5_min  -12 * 1.05
>#    set in6_max   -5 * 0.95
>#    set in6_min   -5 * 1.05
>#    set in7_min    5 * 0.95
>#    set in7_max    5 * 1.05
># The chip does not support in8 min/max
>
># Temperatures
>
># If you are lucky, the BIOS has set the proper sensor types for you.
># If your temperature readings are completely whacky you probably
># need to change the sensor types. Adujst and uncomment the
># appropriate lines below.
>#
># 2 = thermistor; 3 = thermal diode; 0 = unused
>#   set sensor1  3
>#   set sensor2  3
>#   set sensor3  3
>
># If a given sensor isn't used, you will probably want to ignore it
># as well (see ignore statement right below).
># The CPU sensor can be any of temp1, temp2 or temp3 - it's motherboard
># dependent. Same for the motherboard temperature.
>
>#   label  temp1  "CPU Temp"
>#   label  temp2  "M/B Temp"
>#   ignore temp3
>
>#   set temp1_over  60
>#   set temp1_low   10
>#   set temp2_over  50
>#   set temp2_low   10
>
># Fans
>
># The CPU fan can be any of fan1, fan2 or fan3 - it's motherboard
># dependent. Same for the case fan.
>
>#   label  fan1 "CPU Fan"
>#   label  fan2 "Case Fan"
>#   ignore fan3
>
>#   set fan1_min 2000
>#   set fan2_min 2000
>
>
>chip "fscpos-*"
># Fujitsu-Siemens Poseidon chip
>
># Temperature
>
>    label temp1       "Temp1/CPU"
>    label temp2       "Temp2/MB"
>    label temp3       "Temp3/AUX"
>
># Fans
>
>    label fan1        "Fan1"
>    label fan2        "Fan2"
>    label fan3        "Fan3"
>
># Voltage
>
>    label volt12      "+12V"
>    label volt5       "+5V"
>    label voltbatt    "Battery"
>
>
>chip "fscscy-*"
># Fujitsu-Siemens Scylla chip
>
># Temperature
>
>    label temp1       "Temp1/CPU0"
>    label temp2       "Temp2/CPU1"
>    label temp3       "Temp3/MB"
>    label temp4       "Temp4/AUX"
>
># Fans
>
>    label  fan1       "Fan1/CPU0"
>    label  fan2       "Fan2/CPU0"
>    label  fan3       "Fan3"
>    label  fan4       "Fan4"
>    label  fan5       "Fan5"
>    label  fan6       "Fan6"
>
># Voltage
>
>    label volt12      "+12V"
>    label volt5       "+5V"
>    label voltbatt    "+3.3V"
>
>
>chip "fscher-*"
># Fujitsu-Siemens Hermes chip
>
># Temperature
>    label temp1       "Temp1/CPU"
>    label temp2       "Temp2/MB"
>    label temp3       "Temp3/AUX"
>
># Fans
>    label fan1        "Fan1/PS"
>    label fan2        "Fan2/CPU"
>    label fan3        "Fan3/AUX"
>
># Voltage
>    label in0         "+12V"
>    label in1         "+5V"
>    label in2         "Battery"
>
># Note: comment the compute lines below when using the newer unified fschmd
># driver, as that driver does the scaling in the driver
>
># Compute Voltages using mainboard dependant MRO-values
># (see doc/chips/fscher)
>#                           M    R             O               O                  M    R
>    compute in0       (@ * (49 * 33) / 255) + (0 / 100), (@ - (0 / 100)) * 255 / (49 * 33)
>    compute in1       (@ * (20 * 33) / 255) + (0 / 100), (@ - (0 / 100)) * 255 / (20 * 33)
>    compute in2       (@ * (10 * 33) / 255) + (0 / 100), (@ - (0 / 100)) * 255 / (10 * 33)
>
># Read documentation before enabling pwm settings (see doc/chips/fscher)
># WARNING: IMPROPER VALUES MAY DAMAGE YOUR SYSTEM DUE TO OVERHEATING!
>
># Note these set statements will not work with the newer unified fschmd driver
># The functionality is still available using standard sysfs attributes for
># pwm control: pwm#_auto_point1_pwm (which are not accessible through sensors)
>
># Allow fans to turn off
>#    set pwm1          0
>#    set pwm2          0
>#    set pwm3          0
>
># Min cooling
>#    set pwm1          2
>#    set pwm2          1
>#    set pwm3          1
>
># Max cooling
>#    set pwm1          255
>#    set pwm2          255
>#    set pwm3          255
>
>
>chip "pcf8591-*"
>#
>#    values for the Philips PCF8591 chip
>#
># Analog inputs
>
>   ignore ain_conf
># Since Linux 2.6, input configuration is set as module parameter,
># so the line below is for older kernels only.
>#  set    ain_conf    0
>
># You may discard ch2 and ch3 if you don't use them (depends on the input
># configuration)
>#  ignore ch2
>#  ignore ch3
>
>   label  ch0         "Chan. 0"
>   label  ch1         "Chan. 1"
>   label  ch2         "Chan. 2"
>   label  ch3         "Chan. 3"
>
># The driver assumes Vref = 2.56V and Agnd = 0V. If it doesn't match
># your hardware, you have to use compute lines. The example below is
># correct for Vref = 5.0V and Agnd = 0V.
>#  compute ch0 (@ * 500 / 256), (@ * 256 / 500)
>#  compute ch1 (@ * 500 / 256), (@ * 256 / 500)
>#  compute ch2 (@ * 500 / 256), (@ * 256 / 500)
>#  compute ch3 (@ * 500 / 256), (@ * 256 / 500)
>
># Analog output
>
>   ignore aout_enable
>#   set    aout_enable 1
>   label  aout        "Output"
>#   set    aout        0
>
>chip "adm1021-*" "adm1023-*" "max1617-*" "max1617a-*" "thmc10-*" "lm84-*" "gl523sm-*" "mc1066-*"
>
>   label temp 		"Board Temp"
>   label remote_temp	"CPU Temp"
>#   set temp_low		40
>#   set temp_over		70
>#   set remote_temp_low		40
>#   set remote_temp_over	70
>
>chip "lm83-*"
>
>   label temp1 "M/B Temp"
>   label temp2 "D1 Temp"
>   label temp3 "CPU Temp"
>   label temp4 "D3 Temp"
>
># ignore D1 and/or D3 readings if not used
>#   ignore temp2
>#   ignore temp4
>
># change high limits to fit your needs
>#   set temp1_high 55
>#   set temp2_high 60
>#   set temp3_high 65
>#   set temp4_high 60
>
># change critical limit to fit your needs
># only one limit for all four temperatures
># should be higher than each of the high limits above
>#   set tcrit 85
>
>
>chip "max1619-*"
>
>   label temp1 "M/B Temp"
>   label temp2 "CPU Temp"
>
># change high and low limits to fit your needs
>#   set temp2_min   10
>#   set temp2_max   100
>
># change critical limit and hysteresis to fit your needs
>#   set temp2_crit  50
>#   set temp2_hyst  40
>
>
>chip "lm90-*" "adm1032-*" "lm86-*" "max6657-*" "adt7461-*" "max6680-*"
>
>   label temp1 "M/B Temp"
>   label temp2 "CPU Temp"
>   label tcrit1 "M/B Crit"
>   label tcrit2 "CPU Crit"
>
># change high and low limits to fit your needs
>#   set temp1_low  10
>#   set temp1_high 55
>#   set temp2_low  10
>#   set temp2_high 66
>
># change critical limits to fit your needs
># should be higher than the corresponding high limit above
>#   set tcrit1 75
>#   set tcrit2 85
>
># change the hysteresis values (to critical limits) to fit your needs
># note #1: hyst2 will be automatically set with the same delta
># note #2: the internal register, which stores a single, relative value
># for both channels, cannot hold values greater than 31, so the delta
># between critical temperatures and respective absolute hysteresis can
># never exceed this value
>#   set hyst1 70
>
>chip "lm99-*"
>
>   label temp1 "G/C Temp"
>   label temp2 "GPU Temp"
>   label tcrit1 "G/C Crit"
>   label tcrit2 "GPU Crit"
>
># note #1: only the LM99 needs this; for a LM89, comment the compute line
># out
># note #2: there is no way for us to differentiate between a LM89 and a
># LM99; you have to know what you have; LM99 are frequently found on
># graphics cards, most notably nVidia ones
>   compute temp2 @+16, @-16
>
># change high and low limits to fit your needs
>#   set temp1_low  10
>#   set temp1_high 90
>#   set temp2_low  10
>#   set temp2_high 100
>
># change critical limits to fit your needs
># should be higher than the corresponding high limit above
>#   set tcrit1 100
>#   set tcrit2 110
>
># change the hysteresis values (to critical limits) to fit your needs
># note #1: hyst2 will be automatically set with the same delta
># note #2: the internal register, which stores a single, relative value
># for both channels, cannot hold values greater than 31, so the delta
># between critical temperatures and respective absolute hysteresis can
># never exceed this value
>#   set hyst1 105
>
>
>chip "lm63-*"
>
>   label temp1       "M/B Temp"
>   label temp2       "CPU Temp"
>   label temp2_crit  "CPU Crit"
>   label fan1        "CPU Fan"
>
># Change limits to fit your needs. Note that temp2_crit is read-only.
>#   set temp1_high       50
>#   set temp2_low        10
>#   set temp2_high       70
>#   set temp2_crit_hyst  75
>#   set fan1_min         2000
>
>
>chip "vt1211-*"
>
>#							1 for temp, 0 for volt.
>#	Sensor		Voltage Mode	Temp Mode	config bit
>#	--------	------------	---------	--------------
>#	Reading 1			temp1
>#	Reading 3			temp2   	
>#	UCH1/Reading2	in0		temp3		0x04 (4)
>#	UCH2		in1		temp4		0x08 (8)
>#	UCH3		in2		temp5		0x10 (16)
>#	UCH4		in3		temp6		0x20 (32)
>#	UCH5		in4		temp7		0x40 (64)
>#	3.3V		in5
>
># Set uch1-2 to temp mode, uch3-5 to voltage mode. This works only 
># for the 2.4 driver. For the 2.6 driver use the uch_config module parameter.
># If the value doesn't match the hardware wiring, you'll get weird readings!
>#    set config 12
>
># The 2.6 driver will automatically ignore the inputs which are not
># configured, but the 2.4 driver will not so you'll need to add ignore
># statements depending on the config value above.
>#   ignore in0
>#   ignore in1
>#   ignore temp3
>#   ignore temp4
>    ignore temp5
>    ignore temp6
>    ignore temp7
>
>    label in0 "+3.3V"
>    label in1 "+2.5V"
>    label in2 "VCore"
>    label in3 "+5V"
>    label in4 "+12V"
>    label in5 "+3.3V"
>
>    label temp1 "CPU Temp"
>    label temp2 "Int Temp"
>
>    label fan1 "Case Fan"
>    label fan2 "CPU Fan"
>
># All voltage calculations have the form
>#    compute inX  @ * (1 + R1 / R2), @ / (1 + R1 / R2)
>#
># The following are the resistor values as recommended by VIA
>#	Voltage		R1	R2
>#	-------		----	----
>#	VCore	 	-	-	(no scaling)
>#	 3.3		6.8k	10k
>#	 2.5		2k	10k
>#	 5.0		14k	10k
>#	12.0		47k	10k
>#
># The VT1211 internal 3.3V (in5) is scaled by the driver and doesn't
># need to be adjusted here. VCore doesn't need scaling at all.
>
>    compute in0  @ * (1 + 6.8 / 10),  @ / (1 + 6.8 / 10)
>    compute in1  @ * (1 +   2 / 10),  @ / (1 +   2 / 10)
>    compute in3  @ * (1 +  14 / 10),  @ / (1 +  14 / 10)
>    compute in4  @ * (1 +  47 / 10),  @ / (1 +  47 / 10)
>
># Adjust this if your vid is wrong (for 2.4 only); see doc/vid
>#   set vrm 9.1
>
>#   set in0_min 3.3 * 0.95
>#   set in0_max 3.3 * 1.05
>#   set in1_min 2.5 * 0.95
>#   set in1_max 2.5 * 1.05
># If your vid is wrong, hardcode the CPU voltage (e.g. 1.4)
>#   set in2_min vid * 0.97
>#   set in2_max vid * 1.03
>#   set in3_min 5.0 * 0.95
>#   set in3_max 5.0 * 1.05
>#   set in4_min 12.0 * 0.90
>#   set in4_max 12.0 * 1.10
>    set in5_min 3.3 * 0.95
>    set in5_max 3.3 * 1.05
>
># The temperature calculations are of the form
>#    compute tempX  (@ - Offset) / Gain, (@ * Gain) + Offset
>#
># The following are the gain and offset values as recommended by VIA
>#	Diode Type	Gain	Offset
>#	----------	----	------
># 	Intel CPU	0.9528	88.638
>#			0.9686	65.000	*)
>#	VIA C3 Ezra	0.9528	83.869
>#	VIA C3 Ezra-T	0.9528	73.869
>#
># *) These are the values from the previous sensors.conf. I don't know
># where they came from or how they got derived.
>#
># The VT1211 internal temperature (temp2) is scaled by the driver
># and doesn't need to be adjusted here.
>
>    compute temp1  (@ - 73.869) / 0.9528,  (@ * 0.9528) + 73.869
>
># The thermistor calculations are of the form
>#    compute tempX  1 / (1 / 298.15 - (` Vmax / @ - 1)) / B) - 273.15, \
>#                   Vmax / (1 + (^ (B / 298.15 - B / (273.15 + @))))
>#
># B is the thermistor beta value, Vmax is the reference voltage, '^' is the
># exp() operator and '`' is the ln() operator.
># Given B = 3435 and Vmax = 2.2V and assuming that the thermistor forms a
># resistor divider with a resistor equal to the thermistor's nominal value at
># 25 degrees C, the following compute lines can be used:
>
>    compute temp3  1 / (1 / 298.15 - (` (2.2 / @ - 1)) / 3435) - 273.15, \
>                   2.2 / (1 + (^ (3435 / 298.15 - 3435 / (273.15 + @))))
>    compute temp4  1 / (1 / 298.15 - (` (2.2 / @ - 1)) / 3435) - 273.15, \
>                   2.2 / (1 + (^ (3435 / 298.15 - 3435 / (273.15 + @))))
>    compute temp5  1 / (1 / 298.15 - (` (2.2 / @ - 1)) / 3435) - 273.15, \
>                   2.2 / (1 + (^ (3435 / 298.15 - 3435 / (273.15 + @))))
>    compute temp6  1 / (1 / 298.15 - (` (2.2 / @ - 1)) / 3435) - 273.15, \
>                   2.2 / (1 + (^ (3435 / 298.15 - 3435 / (273.15 + @))))
>    compute temp7  1 / (1 / 298.15 - (` (2.2 / @ - 1)) / 3435) - 273.15, \
>                   2.2 / (1 + (^ (3435 / 298.15 - 3435 / (273.15 + @))))
>
>#    set temp1_hyst 80
>#    set temp1_over 85
>#    set temp2_hyst 60
>#    set temp2_over 65
>#    set temp3_hyst 60
>#    set temp3_over 65
>#    set temp4_hyst 40
>#    set temp4_over 45
>
>#    set fan1_min 3000
>#    set fan2_min 3000
>
>chip "vt8231-*"
>#
>#							1 for temp, 0 for volt.
>#	Sensor		Voltage Mode	Temp Mode	config bit
>#	--------	------------	---------	--------------
>#	Reading 1			temp1
>#	UCH1		in0		temp2		0x04 (4)
>#	UCH2		in1		temp3		0x08 (8)
>#	UCH3		in2		temp4		0x10 (16)
>#	UCH4		in3		temp5		0x20 (32)
>#	UCH5		in4		temp6		0x40 (64)
>#	3.3V		in5
>#
># Hardware default is UCH1 in temp mode, UCH2-5 in voltage mode
># Note that the Linux 2.6 driver will not let you change the channel
># configuration. In theory, the BIOS should have done it properly.
>#   set config 4
>
>#    ignore in0
>#    ignore temp3
>#    ignore temp4
>#    ignore temp5
>#    ignore temp6
>
>    label in1 "+2.5V"
>    label in2 "VCore"
>    label in3 "+5V"
>    label in4 "+12V"
>    label in5 "+3.3V"
>
>    label temp1 "CPU Temp"
>    label temp2 "M/B Temp"
>
># Here are the resistor values as recommended by VIA:
>#   Voltage			R1	R2
>#   VCore			no scaling
>#    2.5			2k	10k
>#    3.5 (3.3V ext.)		6.8k	10k
>#    5.0			14k	10k
>#   12.0			47k	10k
>
>#   compute in0  @ * (1 + 6.8 / 10),  @ / (1 + 6.8 / 10)
>    compute in1  @ * (1 +   2 / 10),  @ / (1 +   2 / 10)
>    compute in3  @ * (1 +  14 / 10),  @ / (1 +  14 / 10)
>    compute in4  @ * (1 +  47 / 10),  @ / (1 +  47 / 10)
># in5 is scaled internally so scaling is done by the driver.
>
>#   set in0_min 2.5 * 0.95
>#   set in0_max 2.5 * 1.05
>#   set in1_min 2.5 * 0.95
>#   set in1_max 2.5 * 1.05
># Replace "2.0" with your nominal CPU voltage for in2.
>#   set in2_min 2.0 * 0.95
>#   set in2_max 2.0 * 1.05
>#   set in3_min 5.0 * 0.95
>#   set in3_max 5.0 * 1.05
>#   set in4_min 12.0 * 0.95
>#   set in4_max 12.0 * 1.05
>#   set in5_min 3.3 * 0.95
>#   set in5_max 3.3 * 1.05
>
># For Intel CPU:
>    compute temp1  (@ - 65) / 0.9686,  (@ * 0.9686) + 65
>
># For VIA EPIA CPU (provided by Roger Lucas):
>#   compute temp1  (@ - 45) / 0.7809,  (@ * 0.7809) + 45
>
># Thermistor calculations
># 3435 is the thermistor beta, 2.2 is the reference voltage.
># '^' is the e**x operator; '`' is the ln(x) operator
># (valid in library version 1.4.0 / lm_sensors 2.7.1 or higher)
># This assumes that the thermistor forms a resistor divider with a resistor
># equal to its nominal value at 25 degrees C.
>
>    compute temp2  1 / (1 / 298.15 - (` (2.2 / @ - 1)) / 3435) - 273.15, \
>                   2.2 / (1 + (^ (3435 / 298.15 - 3435 / (273.15 + @))))
>    compute temp3  1 / (1 / 298.15 - (` (2.2 / @ - 1)) / 3435) - 273.15, \
>                   2.2 / (1 + (^ (3435 / 298.15 - 3435 / (273.15 + @))))
>
>#    set temp1_hyst 60
>#    set temp1_over 65
>#    set temp2_hyst 40
>#    set temp2_over 45
>
>#    set fan1_min 3000
>#    set fan2_min 3000
>
>chip "bmc-*"
>#
># You should not need compute lines here, the driver will
># do all the conversions.
># For label lines, copy from syslog/dmesg when the bmcsensors
># module is inserted.
>#
># for example:
># label temp1 "Ambient Temp"
>
>
>chip "smsc47m1-*"
>
># SMSC LPC47M10x, LPC47M13x, LPC47M14x and LPC47B27x chips
>
># We don't set the fan mins by default anymore because they may not exist
># when using the Linux 2.6 driver (since we respect the original chip
># configuration).
>#    set fan1_min 3000
>#    set fan2_min 3000
>
>chip "smsc47m192-*"
>
># Temperature and voltage input from SMSC LPC47M192 and LPC47M997 chips
># This example works on a Gigabyte K8U motherboard
># Voltages are scaled internally, no computations needed
>
>    label in0 "+2.5V"
>#    set in0_min  2.5 * 0.95
>#    set in0_max  2.5 * 1.05
>
>    label in1 "VCore"
>#    set in1_min  vid * 0.95
>#    set in1_max  vid * 1.05
>
>    label in2 "+3.3V"
>#    set in2_min  3.3 * 0.95
>#    set in2_max  3.3 * 1.05
>
>    label in3 "+5V"
>#    set in3_min  5.0 * 0.95
>#    set in3_max  5.0 * 1.05
>
>    label in4 "+12V"
>#    set in4_min  12.0 * 0.95
>#    set in4_max  12.0 * 1.05
>
>    label in5 "VCC"
>#    set in5_min  3.3 * 0.95
>#    set in5_max  3.3 * 1.05
>
>    label in6 "+1.5V"
>#    set in6_min  1.5 * 0.95
>#    set in6_max  1.5 * 1.05
>#   ignore in6
>
>    label in7 "+1.8V"
>#    set in7_min  1.8 * 0.95
>#    set in7_max  1.8 * 1.05
>#   Haven't yet heard from any board that has 1.8V connected, so
>#   this might be more appropriate:
>#   ignore in7
>    
>    label temp1 "Chip Temp"
>#    set temp1_min   0
>#    set temp1_max   60
>
>    label temp2 "CPU Temp"
>#    set temp2_min   0
>#    set temp2_max   60
>
>    label temp3 "Sys Temp"
>#    set temp3_min   0
>#    set temp3_max   60
>
>#
># This example was tested vs. Asus P4S333
>#
>chip "asb100-*"
># adjust this if your vid is wrong; see doc/vid
>    #set vrm 9.0
>
>    label in0 "VCore 1"
>    #set in0_min vid * 0.95
>    #set in0_max vid * 1.05
>
>    label in1 "VCore 2"
>    ignore in1
>    #set in1_min vid * 0.95
>    #set in1_max vid * 1.05
>
>    label in2 "+3.3V"
>    #set in2_min 3.3 * 0.95
>    #set in2_max 3.3 * 1.05
>
>    label in3 "+5V"
>    compute in3 1.68 * @ ,  @ / 1.68
>    #set in3_min 5.0 * 0.95
>    #set in3_max 5.0 * 1.05
>
>    label in4 "+12V"
>    compute in4 3.8 * @ , @ / 3.8
>    #set in4_min 12  * 0.90
>    #set in4_max 12  * 1.10
>
>    label in5 "-12V (reserved)"
>    #ignore in5
>    compute in5 -@ * 3.97 ,  -@ / 3.97
>    #set in5_max -12 * 0.90
>    #set in5_min -12 * 1.10
>
>    label in6 "-5V (reserved)"
>    #ignore in6
>    compute in6 -@ * 1.666 , -@ / 1.666
>    #set in6_max -5  * 0.95
>    #set in6_min -5  * 1.05
>
>    label temp1 "M/B Temp"
>    #set temp1_over 45
>    #set temp1_hyst 40
>
>    label temp2 "CPU Temp (Intel)"
>    #ignore temp2
>    #set temp2_over 60
>    #set temp2_hyst 50
>
>    # PWRTMP connector on P4S333, for external sensor
>    label temp3 "Power Temp"
>    #ignore temp3
>    #set temp3_over 45
>    #set temp3_hyst 40
>
>
>    # Used for Athlon diode, ignore for P4S333
>    label temp4 "CPU Temp (AMD)"
>    #set temp4_over 60
>    #set temp4_hyst 50
>    #ignore temp4
>
>    label fan1 "CPU Fan"
>    #set fan1_div 4
>    #set fan1_min 2000
>
>    label fan2 "Chassis Fan"
>    #set fan2_div 2
>    #set fan2_min 4000
>
>    label fan3 "Power Fan"
>    #set fan3_div 2
>    #set fan3_min 4000
>
>#
># Sample configuration for the Intel S845WD1-E
># courtesy of Marcus Schopen
>#
>chip "lm85c-*" "adm1027-*" "adt7463-*" "lm85-*" "lm85b-*"
>
># Voltage inputs
># Depending on the hardware setup, the ADT7463 may not have in4.
>   label in0   "V1.5"      # AGP on Intel S845WD1-E
>   label in1   "VCore"
>   label in2   "V3.3"
>   label in3   "V5"
>   label in4   "V12"
>
># Temperature inputs
>   label temp1  "CPU Temp"
>   label temp2  "Board Temp"
>   label temp3  "Remote Temp"
>
># Fan inputs
>   label fan1   "CPU_Fan"
>#   label fan2   "Fan2"
>#   label fan3   "Fan3"
>#   label fan4   "Fan4"
>
># PWM Outputs
>   label pwm1   "CPU_PWM"
>   label pwm2   "Fan2_PWM"
>   label pwm3   "Fan3_PWM"
>
># Voltage scaling is done on-chip.  No 'compute' directive
># should be necessary.  If in0 has external scaling set
># it here.
>
>#   compute in0  @ * 2.5,   @ / 2.5
>
># Adjust fans speeds for actual pulses per rev
>#   compute fan1  @ * 2,  @ / 2    # 1 pulse per rev
>#   set fan1_ppr  1                # ADM1027 or ADT7463
>#   compute fan2  @ / 2,  @ * 2    # 4 pulse per rev
>#   set fan2_ppr  4                # ADM1027 or ADT7463
>
># Ignore fans you (or your motherboard) don't have
>#   ignore fan2
>#   ignore fan3
>#   ignore fan4
>
># Set VRM version
># adjust this if your vid is wrong; see doc/vid
>#   set vrm  9.1   # Pentium 4
>
># Set voltage limits
>#   set in0_min  1.5 * 0.95
>#   set in0_max  1.5 * 1.05
>#   set in1_min  vid * 0.95
>#   set in1_max  vid * 1.05
>#   set in2_min  3.3 * 0.95
>#   set in2_max  3.3 * 1.05
>#   set in3_min  5.0 * 0.95
>#   set in3_max  5.0 * 1.05
>#   set in4_min   12 * 0.95
>#   set in4_max   12 * 1.05
>
># Set Fan limits
>#   set fan1_min 4000
>
># Set Temp Limits
>#   set temp1_min 10
>#   set temp1_max 50
>#   set temp2_min 10
>#   set temp2_max 35
>#   set temp3_min 10
>#   set temp3_max 35
>
>chip "pc87366-*"
>
># Voltage inputs
>
># Set VRM version (default 9.0)
>#   set vrm     9.0
>
>   label in7   "Vsb"
>   label in8   "Vdd"
>   label in9   "Vbat"
>   label in10  "AVdd"
>
>   compute in7   @*2, @/2
>   compute in8   @*2, @/2
>   compute in10  @*2, @/2
>
># These are the operating conditions as recommended by National
># Semiconductor
>   set in7_min   3.0
>   set in7_max   3.6
>   set in8_min   3.0
>   set in8_max   3.6
>#   set in9_min   2.4
>#   set in9_max   3.6
>   set in10_min  3.0
>   set in10_max  3.6
>
># Temperature inputs
>
>   label temp1       "CPU0 Temp"
>   label temp1_crit  "CPU0 Crit"
>   label temp2       "CPU1 Temp"
>   label temp2_crit  "CPU1 Crit"
>   label temp3       "S-IO Temp"
>   label temp3_crit  "S-IO Crit"
>
>#   set temp1_min    0
>#   set temp1_max   70
>#   set temp1_crit  85
>#   set temp2_min    0
>#   set temp2_max   70
>#   set temp2_crit  85
>#   set temp3_min    0
>#   set temp3_max   70
>#   set temp3_crit  85
>
># Thermistors
># On some systems, thermistors are used instead of thermal diodes.
># Note that these are the same pins used differently, so you really
># can't have them all on a given system.
>#   ignore temp1
>#   ignore temp2
>   ignore temp4
>   ignore temp5
>   ignore temp6
>
># 3435 is the thermistor beta.
># This assumes that the thermistor forms a resistor divider with a resistor
># equal to its nominal value at 25 degres Celsius. If not, change the values.
># We also assume that you have a working in10 (which is forcibly enabled by
># default). If not, use 3.3 instead, but you lose accuracy.
>
>   compute temp4  3435 / (` (1 / (1 - @ / in10) - 1) + 3435 / 298.15) - 273.15, \
>                  in10 * (1 - 1 / (1 + (^ (3435 / (273.15 + @) - 3435 / 298.15))))
>   compute temp5  3435 / (` (1 / (1 - @ / in10) - 1) + 3435 / 298.15) - 273.15, \
>                  in10 * (1 - 1 / (1 + (^ (3435 / (273.15 + @) - 3435 / 298.15))))
>   compute temp6  3435 / (` (1 / (1 - @ / in10) - 1) + 3435 / 298.15) - 273.15, \
>                  in10 * (1 - 1 / (1 + (^ (3435 / (273.15 + @) - 3435 / 298.15))))
>
>#   set temp4_min    0
>#   set temp4_max   70
>#   set temp4_crit  85
>#   set temp5_min    0
>#   set temp5_max   70
>#   set temp5_crit  85
>#   set temp6_min    0
>#   set temp6_max   70
>#   set temp6_crit  85
>
># Fan inputs
>
># Ignore fans you don't have
>#   ignore fan2
>#   ignore fan3
>
>#   set fan1_min 2000
>#   set fan2_min 2000
>#   set fan3_min 2000
>
>
>chip "adm1030-*"
>
>   label temp1 "SYS Temp"
>   label temp2 "CPU Temp"
>   label temp1_crit "SYS Crit"
>   label temp2_crit "CPU Crit"
>
>#   set temp1_max  60
>#   set temp2_max  70
>#   set temp1_crit 85
>#   set temp2_crit 85
>
>   label fan1 "CPU Fan"
>
>#   set fan1_min 2000
>
>
>chip "adm1031-*"
>
>   label temp1 "SYS Temp"
>   label temp2 "CPU Temp"
>   label temp3 "AUX Temp"
>   label temp1_crit "SYS Crit"
>   label temp2_crit "CPU Crit"
>   label temp3_crit "AUX Crit"
>
>#   set temp1_max  60
>#   set temp2_max  70
>#   set temp3_max  70
>#   set temp1_crit 85
>#   set temp2_crit 85
>#   set temp3_crit 85
>
>   label fan1 "CPU Fan"
>   label fan2 "Case Fan"
>
>#   set fan1_min 2000
>#   set fan2_min 2000
>
>
>chip "w83l785ts-*"
>
>   label temp1 "CPU Diode"
>
>chip "lm92-*"
>
>   label temp "CPU Temp"
>
># Change limits as you see fit
>#   set temp_low 14
>#   set temp_high 60
>#   set temp_crit 72
># Hysteresis is computed from critical limit for Linux 2.6,
># and from high limit for Linux 2.4. That might change in the future.
># Whatever, the same relative hysteresis is used for all of low, high
># and critical limits.
>#   set temp_hyst 70 # Linux 2.6
>#   set temp_hyst 58 # Linux 2.4
>
>
># Winbond W83627EHF configuration originally contributed by Leon Moonen
># This is for an Asus P5P800, voltages for A8V-E SE.
>chip "w83627ehf-*" "w83627dhg-*"
>
>    label in0 "VCore"
>    label in2 "AVCC"
>    label in3 "3VCC"
>    label in7 "VSB"
>    label in8 "VBAT"
>
># The W83627DHG has no in9, uncomment the following line
>#    ignore in9
>
># +12V is in1 and +5V is in6 as recommended by datasheet 
>    compute in1 @*(1+(56/10)),  @/(1+(56/10))
>    compute in6 @*(1+(22/10)),  @/(1+(22/10))
>#    set in1_min   12.0*0.9
>#    set in1_max   12.0*1.1
>#    set in6_min   5.0*0.95
>#    set in6_max   5.0*1.05
>
># Set the 3.3V
>#    set in2_min   3.3*0.95
>#    set in2_max   3.3*1.05
>#    set in3_min   3.3*0.95
>#    set in3_max   3.3*1.05
>#    set in7_min   3.3*0.95
>#    set in7_max   3.3*1.05
>#    set in8_min   3.3*0.95
>#    set in8_max   3.3*1.05
>
># Fans
>   label fan1      "Case Fan"
>   label fan2      "CPU Fan"
>   label fan3      "Aux Fan"
>#  ignore fan3
>#  ignore fan4
>#  set fan1_min    1200
>#  set fan2_min    1700
>
># Temperatures
>   label temp1     "Sys Temp"
>   label temp2     "CPU Temp"
>   label temp3     "AUX Temp"
>   
>#  ignore temp3
>#  set temp1_over  45
>#  set temp1_hyst  40
>#  set temp2_over  45
>#  set temp2_hyst  40
>
>
># Fintek F71805F/FG configuration
># This is the recommended wiring and resistor values from the F71805F/FG
># datasheet. Your motherboard manufacturer may or may not have followed
># these.
>chip "f71805f-*"
># Voltages
>   label in0 "+3.3V"
>   label in1 "Vtt1.2V"
>   label in2 "Vram"
>   label in3 "Vchip"
>   label in4 "+5V"
>   label in5 "+12V"
>   label in6 "Vcc1.5V"
>   label in7 "Vcore"
>   label in8 "5VSB"
>
>   # in0 is scaled internally
>   compute in2  @*(1+100/100), @/(1+100/100)
>   compute in3  @*(1+100/47),  @/(1+100/47)
>   compute in4  @*(1+200/47),  @/(1+200/47)
>   compute in5  @*(1+200/20),  @/(1+200/20)
>   compute in8  @*(1+200/47),  @/(1+200/47)
>
>   # in0 is the chip's own VCC.
>   set in0_min  3.0
>   set in0_max  3.6
>
>   #set in1_min  1.2 * 0.95
>   #set in1_max  1.2 * 1.05
>   #set in2_min  2.5 * 0.95
>   #set in2_max  2.6 * 1.05
>   #set in3_min  3.3 * 0.95
>   #set in3_max  3.3 * 1.05
>   #set in4_min  5.0 * 0.95
>   #set in4_max  5.0 * 1.05
>   #set in5_min 12.0 * 0.95
>   #set in5_max 12.0 * 1.05
>   #set in6_min  1.5 * 0.95
>   #set in6_max  1.5 * 1.05
>   # in7 nominal value depends on the CPU model
>   #set in7_min  1.4 * 0.95
>   #set in7_max  1.4 * 1.05
>   #set in8_min  5.0 * 0.95
>   #set in8_max  5.0 * 1.05
>
># Fans
>   label fan1 "CPU Fan"
>   label fan2 "Sys Fan"
>   label fan3 "Aux Fan"
>
>   #set fan1_min 2100
>   #set fan2_min 1400
>   #set fan3_min 1400
>
># Temperatures
>   label temp1 "CPU Temp"
>   label temp2 "Sys Temp"
>   label temp3 "Aux Temp"
>
>   #set temp1_max   60
>   #set temp1_hyst  58
>   #set temp2_max   50
>   #set temp2_hyst  48
>   #set temp3_max   50
>   #set temp3_hyst  48
>
>
># Abit Uguru sensor part configuration.
># The Abit Uguru is relativly straight forward to configure.
># label statements:
># The voltage (in) temp and fan sensors are usualy in the same order as listed
># in the BIOS, but not always!
># compute statements:
># The temp and fan sensors don't need any compute statements. Most voltage
># inputs are directly connected to the IC and thus don't need an compute line
># because the 0-3494 mV voltage given by the kernel driver is correct. The sen-
># sors for higher voltages however are connect through a divider and measure
># ranges of: 0-4361mV, 0-6248mV or 0-14510mV. Thus the measured voltages must
># be multiplied by resp. 1.248, 1.788 or 4.153. 3.3 volt sources use the 1.248
># mutiplier, 5 volt the 1.788 and 12 volt the 4.153.
># set statements:
># The Abit BIOS sets reasonable treshholds and allows changing them, thus
># set statements may be ommited. The abituguru kernel driver does support
># them if you want to add them.
>#
># The configuration below is for the Kv8Pro and AV8 this is the default as this
># driver is developed and tested on a Kv8Pro.
># Configurations for many other Abit boards can be found at:
># http://www.lm-sensors.org/trac/wiki/Configurations/Abit
># If your motherboard isn't listed there and you create a configuration for it
># please add it there.
>
>chip "abituguru-*"
>
>   label in0 "CPU Core Voltage"
>   label in1 "DDR Voltage"
>   label in2 "DDR VTT Voltage"
>   label in3 "NB Voltage"
>   label in4 "SB Voltage"
>   label in5 "HyperTransport Voltage"
>   label in6 "AGP VDDQ Voltage"
>   label in7 "ATX +5V"
>   compute in7 @*1.788 , @/1.788
>   label in8 "ATX +3.3V"
>   compute in8 @*1.248 , @/1.248
>   label in9 "Standby Voltage (+5V)"
>   compute in9 @*1.788 , @/1.788
>   label in10 "3VDual Voltage"
>   compute in10 @*1.248 , @/1.248
>
>   label temp1 "CPU Temperature"
>   label temp2 "SYS Temperature"
>   label temp3 "PWM Temperature"
>   ignore temp4
>   ignore temp5
>   ignore temp6
>   ignore temp7
>
>   label fan1 "CPU FAN Speed"
>   label fan2 "NB FAN Speed"
>   label fan3 "SYS FAN Speed"
>   label fan4 "AUX1 FAN Speed"
>   label fan5 "AUX2 FAN Speed"
>   ignore fan6
>
>chip "k8temp-*"
>
>   label temp1 "Core0 Temp"
>   label temp2 "Core0 Temp"
>   label temp3 "Core1 Temp"
>   label temp4 "Core1 Temp"
>
>
>#
># Sample configuration for the SMSC DME1737 and ASUS A8000
>#
>chip "dme1737-*"
>
># Voltage inputs
>   label in0   "V5stby"
>   label in1   "Vccp"
>   label in2   "V3.3"
>   label in3   "V5"
>   label in4   "V12"
>   label in5   "V3.3stby"
>   label in6   "Vbat"
>
># Temperature inputs
>   label temp1   "RD1 Temp"
>   label temp2   "Int Temp"
>   label temp3   "CPU Temp"
>
># Fan inputs
>   label fan1   "CPU_Fan"
>   label fan2   "Fan2"
>   label fan3   "Fan3"
>   label fan4   "Fan4"
>   label fan5   "Fan5"
>   label fan6   "Fan6"
>
># PWM Outputs
>   label pwm1   "CPU_PWM"
>   label pwm2   "Fan2_PWM"
>   label pwm3   "Fan3_PWM"
>   label pwm5   "Fan5_PWM"
>   label pwm6   "Fan6_PWM"
>
># Set voltage limits
>#   set in0_min   5.0 * 0.95
>#   set in0_max   5.0 * 1.05
>#   set in1_min   1.4 * 0.95
>#   set in1_max   1.4 * 1.05
>#   set in2_min   3.3 * 0.95
>#   set in2_max   3.3 * 1.05
>#   set in3_min   5.0 * 0.95
>#   set in3_max   5.0 * 1.05
>#   set in4_min  12.0 * 0.95
>#   set in4_max  12.0 * 1.05
>#   set in5_min   3.3 * 0.95
>#   set in5_max   3.3 * 1.05
>#   set in6_min   3.0 * 0.95
>#   set in6_max   3.0 * 1.05
>
># Set Temp Limits
>#   set temp1_min 10
>#   set temp1_max 75
>#   set temp2_min 10
>#   set temp2_max 75
>#   set temp3_min 10
>#   set temp3_max 75
>
># Set Fan limits
>#   set fan1_min 1000
>#   set fan2_min 1000
>#   set fan3_min 1000
>#   set fan4_min 1000
>#   set fan5_min 1000
>#   set fan6_min 1000
>
>
>#
># sample configuration for the Fintek f71882fg and f71883fg
>#
># The configuration below is for the Epox EP-9U1697 GLI board, which has a
># Fintek f71883fg relabeled as Epox ep1308, this is the default config as this
># driver is developed and tested on an Epox EP-9U1697 GLI board.
>#
># Premade configurations for other boards can be found at:
># http://www.lm-sensors.org/trac/wiki/Configurations/
># If your motherboard isn't listed there and you create a configuration for it
># please add it there.
>#
>chip "f71882fg-*"
>
># Temperature
>    label temp1       "CPU"
>    label temp2       "System"
>    ignore temp3
>
># Fans
>    label fan1        "CPU"
>    label fan2        "System"
>    label fan3        "Power"
>    label fan4        "Aux"
>
># Voltage
>    label in0         "3.3V"
>    label in1         "Vcore"
>    label in2         "Vdimm"
>    label in3         "Vchip"
>    label in4         "+5V"
>    label in5         "12V"
>    label in6         "5VSB"
>    label in7         "3VSB"
>    label in8         "Battery"
>
># never change the in0, in7 and in8 compute, these are hardwired in the chip!
>    compute in0       (@ * 2), (@ / 2) 
>    compute in2       (@ * 2), (@ / 2)
>    compute in3       (@ * 2), (@ / 2)
>    compute in4       (@ * 5.25), (@ / 5.25)
>    compute in5       (@ * 12.83), (@ / 12.83)
>    compute in6       (@ * 5.25), (@ / 5.25)
>    compute in7       (@ * 2), (@ / 2)
>    compute in8       (@ * 2), (@ / 2)
>
>
>chip "adm1022-*" "thmc50-*"
>
>   label temp "M/B Temp"
>   # Single CPU setup
>   label remote_temp "CPU Temp"
>
>   # Dual CPU setup (ADM1022 only)
>   #label remote_temp "CPU0 Temp"
>   #label remote_temp2 "CPU1 Temp"
>

Actions: View

Attachments on bug 436767: 297416 | 297776