Attachment 297516 Details for Bug 436456 – This is off the new 2.6.24.3-12 kernel

This is off the new 2.6.24.3-12 kernel

dmesg (text/plain), 22.16 KB, created by David on 2008-03-10 21:40:31 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: David

Created: 2008-03-10 21:40:31 UTC

Size: 22.16 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.24.3-12.fc8 (mockbuild@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Tue Feb 26 14:58:29 EST 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000005fffc000 (usable)
> BIOS-e820: 000000005fffc000 - 000000005ffff000 (ACPI data)
> BIOS-e820: 000000005ffff000 - 0000000060000000 (ACPI NVS)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>639MB HIGHMEM available.
>896MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 393212) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   393212
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   393212
>On node 0 totalpages: 393212
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 1279 pages used for memmap
>  HighMem zone: 162557 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000F5810, 0014 (r0 ASUS  )
>ACPI: RSDT 5FFFC000, 0030 (r1 ASUS   P4S8X    42302E31 MSFT 31313031)
>ACPI: FACP 5FFFC0C0, 0074 (r1 ASUS   P4S8X    42302E31 MSFT 31313031)
>ACPI: DSDT 5FFFC134, 2A21 (r1   ASUS P4S8X        1000 MSFT  100000B)
>ACPI: FACS 5FFFF000, 0040
>ACPI: BOOT 5FFFC030, 0028 (r1 ASUS   P4S8X    42302E31 MSFT 31313031)
>ACPI: APIC 5FFFC058, 005A (r1 ASUS   P4S8X    42302E31 MSFT 31313031)
>ACPI: PM-Timer IO Port: 0xe408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:2 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 128, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 70000000 (gap: 60000000:9ec00000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 390141
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07ba000 soft=c079a000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2800.275 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1550244k/1572848k available (2238k kernel code, 21344k reserved, 1131k data, 284k init, 655344k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0750000 - 0xc0797000   ( 284 kB)
>      .data : 0xc062fa09 - 0xc074a724   (1131 kB)
>      .text : 0xc0400000 - 0xc062fa09   (2238 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 5603.46 BogoMIPS (lpj=2801731)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Hyper-Threading is disabled
>CPU: After all inits, caps: bfebf3ff 00000000 00000000 0000b080 00004400 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
>Total of 1 processors activated (5603.46 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1680 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000001
>  groups: 00000001
>net_namespace: 64 bytes
>Booting paravirtualized kernel on bare hardware
>Time:  5:17:39  Date: 03/08/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xf11b0, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>Enabling SiS 96x SMBus.
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 18 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>Time: tsc clocksource has been installed.
>system 00:00: iomem range 0x0-0x9ffff could not be reserved
>system 00:00: iomem range 0xf0000-0xfffff could not be reserved
>system 00:00: iomem range 0x100000-0x5fffffff could not be reserved
>system 00:00: iomem range 0xfec00000-0xfec000ff could not be reserved
>system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
>system 00:02: ioport range 0xe400-0xe47f has been reserved
>system 00:02: ioport range 0xe480-0xe4ff has been reserved
>system 00:02: ioport range 0xe600-0xe61f has been reserved
>system 00:02: ioport range 0x480-0x48f has been reserved
>system 00:02: iomem range 0xffee0000-0xffefffff has been reserved
>system 00:03: iomem range 0xfffe0000-0xffffffff could not be reserved
>system 00:04: ioport range 0x4d0-0x4d1 has been reserved
>system 00:11: ioport range 0x295-0x296 has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: d000-dfff
>  MEM window: d7000000-d7ffffff
>  PREFETCH window: e0000000-febfffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3688k freed
>Simple Boot Flag at 0x3a set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1204953459.484:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key FF572035AA99318
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Invalid PBLK length [5]
>ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>agpgart: Detected SiS chipset - id:1608
>agpgart: AGP aperture is 64M @ 0xd8000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>PCI: Enabling device 0000:00:0a.0 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 16
>0000:00:0a.0: ttyS2 at I/O 0x6800 (irq = 16) is a 16550A
>0000:00:0a.0: ttyS3 at I/O 0x6400 (irq = 16) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 0:827:263
>Freeing unused kernel memory: 284k freed
>Write protecting the kernel read-only data: 894k
>PCI: Enabling device 0000:00:03.3 (0004 -> 0006)
>ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 17
>ehci_hcd 0000:00:03.3: EHCI Host Controller
>ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
>PCI: cache line size of 128 is not supported by device 0000:00:03.3
>ehci_hcd 0000:00:03.3: irq 17, io mem 0xd4800000
>ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20
>ohci_hcd 0000:00:03.0: OHCI Host Controller
>ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:03.0: irq 20, io mem 0xd6000000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 18
>ohci_hcd 0000:00:03.1: OHCI Host Controller
>ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:03.1: irq 18, io mem 0xd5800000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input2
>ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 19
>ohci_hcd 0000:00:03.2: OHCI Host Controller
>ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:03.2: irq 19, io mem 0xd5000000
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>USB Universal Host Controller Interface driver v3.0
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 21
>ACPI: PCI interrupt for device 0000:00:02.5 disabled
>usb 2-2: new full speed USB device using ohci_hcd and address 2
>usb 2-2: not running at top speed; connect to a high speed hub
>usb 2-2: configuration #1 chosen from 1 choice
>pata_sis 0000:00:02.5: version 0.5.2
>ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 21
>scsi0 : pata_sis
>scsi1 : pata_sis
>ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xa400 irq 14
>ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xa408 irq 15
>ata1.00: ATA-7: ST3300831A, 3.01, max UDMA/100
>ata1.00: 586072368 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>ata2.00: ATAPI: PIONEER DVD-RW  DVR-110, 1.41, max UDMA/66
>ata2.00: limited to UDMA/33 due to 40-wire cable
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      ST3300831A       3.01 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 586072368 512-byte hardware sectors (300069 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 586072368 512-byte hardware sectors (300069 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-110  1.41 PQ: 0 ANSI: 5
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
>pata_sil680 0000:00:09.0: version 0.4.8
>sil680: 133MHz clock.
>ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 22
>scsi2 : pata_sil680
>scsi3 : pata_sil680
>ata3: PATA max UDMA/133 irq 22
>ata4: PATA max UDMA/133 irq 22
>ata3.00: ATA-6: ST3160023A, 8.01, max UDMA/100
>ata3.00: 312581808 sectors, multi 16: LBA48 
>ata3.00: configured for UDMA/100
>ata4.00: ATA-5: QUANTUM FIREBALLlct20 10, APL.0900, max UDMA/100
>ata4.00: 20044080 sectors, multi 8: LBA 
>ata4.00: limited to UDMA/33 due to 40-wire cable
>ata4.00: configured for UDMA/33
>scsi 2:0:0:0: Direct-Access     ATA      ST3160023A       8.01 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 2:0:0:0: [sdb] Attached SCSI disk
>scsi 3:0:0:0: Direct-Access     ATA      QUANTUM FIREBALL APL. PQ: 0 ANSI: 5
>sd 3:0:0:0: [sdc] 20044080 512-byte hardware sectors (10263 MB)
>sd 3:0:0:0: [sdc] Write Protect is off
>sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:0:0: [sdc] 20044080 512-byte hardware sectors (10263 MB)
>sd 3:0:0:0: [sdc] Write Protect is off
>sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1
>sd 3:0:0:0: [sdc] Attached SCSI disk
>Initializing USB Mass Storage driver...
>scsi4 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usb-storage: device scan complete
>scsi 4:0:0:0: Direct-Access     EPSON    Stylus Storage   1.00 PQ: 0 ANSI: 2
>sd 4:0:0:0: [sdd] Attached SCSI removable disk
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1204953478.956:2): enforcing=1 old_enforcing=0 auid=4294967295
>SELinux:8192 avtab hash slots allocated.Num of rules:217163
>SELinux:8192 avtab hash slots allocated.Num of rules:217163
>security:  8 users, 12 roles, 2363 types, 114 bools, 1 sens, 1024 cats
>security:  67 classes, 217163 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>audit(1204953479.426:3): policy loaded auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>sd 3:0:0:0: Attached scsi generic sg3 type 0
>sd 4:0:0:0: Attached scsi generic sg4 type 0
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0xe600
>input: Power Button (FF) as /devices/virtual/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/virtual/input/input4
>ACPI: Power Button (CM) [PWRB]
>PCI: Enabling device 0000:00:02.3 (0004 -> 0006)
>ACPI: PCI Interrupt 0000:00:02.3[B] -> GSI 17 (level, low) -> IRQ 22
>firewire_ohci: Added fw-ohci device 0000:00:02.3, OHCI version 1.0
>usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0803
>usbcore: registered new interface driver usblp
>sis900.c: v1.08.10 Apr. 2 2006
>PCI: Enabling device 0000:00:04.0 (0004 -> 0007)
>ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 23
>0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
>0000:00:04.0: Using transceiver found at address 1 as default
>eth0: SiS 900 PCI Fast Ethernet at 0x8800, IRQ 23, 00:0c:6e:2b:c8:57
>PCI: Enabling device 0000:00:02.7 (0004 -> 0005)
>ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 16
>8139too Fast Ethernet driver 0.9.28
>input: PC Speaker as /devices/platform/pcspkr/input/input5
>intel8x0_measure_ac97_clock: measured 50866 usecs
>intel8x0: clocking to 48000
>r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
>PCI: Enabling device 0000:00:0b.0 (0014 -> 0017)
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 23
>eth1: RTL8110s at 0xf89d8000, 00:40:f4:a9:d5:4d, XID 04000000 IRQ 23
>PCI: Enabling device 0000:00:0c.0 (0004 -> 0007)
>ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 21
>eth2: RealTek RTL8139 at 0xf89de000, 00:05:1c:1c:22:5f, IRQ 21
>eth2:  Identified 8139 chip type 'RTL-8100B/8139D'
>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>parport_pc 00:0a: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
>gameport: NS558 PnP Gameport is pnp00:10/gameport0, io 0x200, speed 615kHz
>udev: renamed network interface eth2 to eth0
>udev: renamed network interface eth0_rename to eth2
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 21
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized radeon 1.28.0 20060524 on minor 0
>device-mapper: multipath: version 1.0.5 loaded
>loop: module loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs warning: mounting unchecked fs, running e2fsck is recommended
>EXT3 FS on sdb1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdb1, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs warning: mounting unchecked fs, running e2fsck is recommended
>EXT3 FS on sdc1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdc1, type ext3), uses xattr
>Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:2031608k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts

Actions: View

Attachments on bug 436456: 297516 | 297572 | 297573 | 297574 | 297575 | 297667 | 297668 | 297669 | 297895 | 297954