Attachment 297519 Details for Bug 436591 – dmesg from 2.6.24.3-12.fc8 (on the same machine after a BIOS update)

dmesg from 2.6.24.3-12.fc8 (on the same machine after a BIOS update)

dmesg.2.6.24.3-12.fc8 (text/plain), 25.22 KB, created by Michal Jaegermann on 2008-03-10 21:45:32 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Michal Jaegermann

Created: 2008-03-10 21:45:32 UTC

Size: 25.22 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.24.3-12.fc8 (mockbuild@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Tue Feb 26 14:21:30 EST 2008
>Command line: ro root=/dev/VolGroup00/LogVol00 rhgb selinux=0
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
> BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI data)
> BIOS-e820: 000000007ffbe000 - 000000007ffe0000 (ACPI NVS)
> BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524208) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.3 present.
>ACPI: RSDP 000FB8B0, 0024 (r2 ACPIAM)
>ACPI: XSDT 7FFB0100, 004C (r1 A_M_I_ OEMXSDT  10000730 MSFT       97)
>ACPI: FACP 7FFB0290, 00F4 (r3 A_M_I_ OEMFACP  10000730 MSFT       97)
>ACPI: DSDT 7FFB0440, 7CA3 (r1  A0578 A0578000        0 INTL 20060113)
>ACPI: FACS 7FFBE000, 0040
>ACPI: APIC 7FFB0390, 006C (r1 A_M_I_ OEMAPIC  10000730 MSFT       97)
>ACPI: MCFG 7FFB0400, 003C (r1 A_M_I_ OEMMCFG  10000730 MSFT       97)
>ACPI: OEMB 7FFBE040, 0060 (r1 A_M_I_ AMI_OEM  10000730 MSFT       97)
>ACPI: HPET 7FFB80F0, 0038 (r1 A_M_I_ OEMHPET  10000730 MSFT       97)
>Scanning NUMA topology in Northbridge 24
>CPU has 2 num_cores
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007ffb0000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524208) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000007ffb0000
> [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
> [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
> [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
> [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
> [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
> [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
> [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
> [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
> [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
> [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
> [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
> [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
> [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
> [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   524208
>On node 0 totalpages: 524111
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1326 pages reserved
>  DMA zone: 2617 pages, LIFO batch:0
>  DMA32 zone: 7110 pages used for memmap
>  DMA32 zone: 513002 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>ATI board detected. Disabling timer routing over 8254.
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0x8300 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000
>swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:7f700000)
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>PERCPU: Allocating 42248 bytes of per cpu data
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 515619
>Policy zone: DMA32
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb selinux=0
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Extended CMOS year: 2000
>hpet clockevent registered
>TSC calibrated against HPET
>Marking TSC unstable due to TSCs unsynchronized
>time.c: Detected 2405.467 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Checking aperture...
>CPU 0: aperture @ 380e000000 size 32 MB
>Aperture too small (32 MB)
>No AGP bridge found
>Memory: 2058076k/2096832k available (2492k kernel code, 38368k reserved, 1390k data, 332k init)
>SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
>Calibrating delay using timer specific routine.. 4813.86 BogoMIPS (lpj=2406931)
>Security Framework initialized
>SELinux:  Disabled at boot.
>Capability LSM initialized
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>APIC timer calibration result 12528488
>Detected 12.528 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4810.83 BogoMIPS (lpj=2405418)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=224 bytes
>sizeof(task_struct)=2224 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000000,00000003
>  groups: 00000000,00000001 00000000,00000002
>  domain 1: span 00000000,00000003
>   groups: 00000000,00000003
>CPU1 attaching sched-domain:
> domain 0: span 00000000,00000003
>  groups: 00000000,00000002 00000000,00000001
>  domain 1: span 00000000,00000003
>   groups: 00000000,00000003
>net_namespace: 120 bytes
>Time: 19:04:26  Date: 03/10/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>Error attaching device data
>Error attaching device data
>Error attaching device data
>Error attaching device data
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Transparent bridge - 0000:00:14.4
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  C8, should be BF [20070126]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>DMAR:No DMAR devices found
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 32-bit timers, 14318180 Hz
>Time: hpet clocksource has been installed.
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>system 00:06: ioport range 0x4d0-0x4d1 has been reserved
>system 00:06: ioport range 0x40b-0x40b has been reserved
>system 00:06: ioport range 0x4d6-0x4d6 has been reserved
>system 00:06: ioport range 0xc00-0xc01 has been reserved
>system 00:06: ioport range 0xc14-0xc14 has been reserved
>system 00:06: ioport range 0xc50-0xc51 has been reserved
>system 00:06: ioport range 0xc52-0xc52 has been reserved
>system 00:06: ioport range 0xc6c-0xc6c has been reserved
>system 00:06: ioport range 0xc6f-0xc6f has been reserved
>system 00:06: ioport range 0xcd0-0xcd1 has been reserved
>system 00:06: ioport range 0xcd2-0xcd3 has been reserved
>system 00:06: ioport range 0xcd4-0xcd5 has been reserved
>system 00:06: ioport range 0xcd6-0xcd7 has been reserved
>system 00:06: ioport range 0xcd8-0xcdf has been reserved
>system 00:06: ioport range 0x800-0x89f has been reserved
>system 00:06: ioport range 0xb10-0xb1f has been reserved
>system 00:06: ioport range 0x900-0x90f has been reserved
>system 00:06: ioport range 0x910-0x91f has been reserved
>system 00:06: ioport range 0xfe00-0xfefe has been reserved
>system 00:06: iomem range 0xffb80000-0xffbfffff could not be reserved
>system 00:06: iomem range 0xfff00000-0xffffffff could not be reserved
>system 00:06: iomem range 0xff600000-0xff60ffff has been reserved
>system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
>system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
>system 00:0c: ioport range 0xe00-0xe0f has been reserved
>system 00:0c: ioport range 0xe80-0xe8f has been reserved
>system 00:0c: ioport range 0xf40-0xf4f has been reserved
>system 00:0c: ioport range 0xa30-0xa3f has been reserved
>system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:0e: iomem range 0x0-0x9ffff could not be reserved
>system 00:0e: iomem range 0xc0000-0xcffff has been reserved
>system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
>system 00:0e: iomem range 0x100000-0x7fffffff could not be reserved
>system 00:0e: iomem range 0x0-0x0 could not be reserved
>PCI: Bridge: 0000:00:02.0
>  IO window: c000-cfff
>  MEM window: fbd00000-fbdfffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Bridge: 0000:00:05.0
>  IO window: d000-dfff
>  MEM window: fbe00000-fbefffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:14.4
>  IO window: e000-efff
>  MEM window: fbf00000-fbffffff
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3954k freed
>audit: initializing netlink socket (disabled)
>audit(1205175865.496:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>ksign: Installing public key data
>Loading keyring
>- Added public key 224A23E13247065A
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:05.0:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: duty_cycle spans bit 4
>ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ processors (2 cpu cores) (version 2.20.00)
>powernow-k8: MP systems not supported by PSB BIOS structure
>powernow-k8: MP systems not supported by PSB BIOS structure
>registered taskstats version 1
>  Magic number: 0:261:91
>Freeing unused kernel memory: 332k freed
>Write protecting the kernel read-only data: 1080k
>ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:13.5: EHCI Host Controller
>ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:13.5: debug port 1
>ehci_hcd 0000:00:13.5: irq 19, io mem 0xfbcfac00
>ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.0: irq 16, io mem 0xfbcff000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:13.1: irq 17, io mem 0xfbcfe000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.2: OHCI Host Controller
>ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:13.2: irq 18, io mem 0xfbcfd000
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 1-3: new high speed USB device using ehci_hcd and address 3
>ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17
>ohci_hcd 0000:00:13.3: OHCI Host Controller
>ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
>ohci_hcd 0000:00:13.3: irq 17, io mem 0xfbcfc000
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 1-3: configuration #1 chosen from 1 choice
>hub 1-3:1.0: USB hub found
>hub 1-3:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.4: OHCI Host Controller
>ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
>ohci_hcd 0000:00:13.4: irq 18, io mem 0xfbcfb000
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>USB Universal Host Controller Interface driver v3.0
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ahci 0000:00:12.0: version 3.0
>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 21 (level, low) -> IRQ 21
>ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
>ahci 0000:00:12.0: controller can't do PMP, turning off CAP_PMP
>usb 1-9: new high speed USB device using ehci_hcd and address 5
>usb 1-9: configuration #1 chosen from 1 choice
>usb 2-1: new full speed USB device using ohci_hcd and address 2
>usb 2-1: configuration #1 chosen from 1 choice
>ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part 
>PCI: Setting latency timer of device 0000:00:12.0 to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>ata1: SATA max UDMA/133 abar m1024@0x88000000 port 0x88000100 irq 21
>ata2: SATA max UDMA/133 abar m1024@0x88000000 port 0x88000180 irq 21
>ata3: SATA max UDMA/133 abar m1024@0x88000000 port 0x88000200 irq 21
>ata4: SATA max UDMA/133 abar m1024@0x88000000 port 0x88000280 irq 21
>usb 3-2: new low speed USB device using ohci_hcd and address 2
>usb 3-2: configuration #1 chosen from 1 choice
>input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/input/input2
>input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.1-2
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-7: WDC WD1200JS-22MHB0, 02.01C03, max UDMA/133
>ata1.00: 234441648 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/133
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2.00: ATA-7: WDC WD1200JS-22MHB0, 02.01C03, max UDMA/133
>ata2.00: 234441648 sectors, multi 16: LBA48 
>ata2.00: configured for UDMA/133
>ata3: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD1200JS-22M 02.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 < sda5 sda6 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: Direct-Access     ATA      WDC WD1200JS-22M 02.0 PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdb] 234441648 512-byte hardware sectors (120034 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sdb] 234441648 512-byte hardware sectors (120034 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 >
>sd 1:0:0:0: [sdb] Attached SCSI disk
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>ahci 0000:02:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
>ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>scsi4 : ahci
>ata5: SATA max UDMA/133 abar m8192@0xfbefe000 port 0xfbefe100 irq 17
>ata5: SATA link down (SStatus 0 SControl 300)
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
>Initializing USB Mass Storage driver...
>scsi5 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 5
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device scan complete
>scsi 5:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
>scsi 5:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
>scsi 5:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
>scsi 5:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
>sd 5:0:0:0: [sdc] Attached SCSI removable disk
>sd 5:0:0:1: [sdd] Attached SCSI removable disk
>sd 5:0:0:2: [sde] Attached SCSI removable disk
>sd 5:0:0:3: [sdf] Attached SCSI removable disk
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>input: Power Button (FF) as /devices/virtual/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/virtual/input/input4
>ACPI: Power Button (CM) [PWRB]
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>sd 5:0:0:0: Attached scsi generic sg2 type 0
>sd 5:0:0:1: Attached scsi generic sg3 type 0
>sd 5:0:0:2: Attached scsi generic sg4 type 0
>sd 5:0:0:3: Attached scsi generic sg5 type 0
>usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x043D pid 0x000C
>usbcore: registered new interface driver usblp
>ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 23 (level, low) -> IRQ 23
>skge 1.13 addr 0xfbff8000 irq 23 chip Yukon-Lite rev 9
>skge eth0: addr 00:18:f3:46:e2:34
>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
>scsi6 : pata_atiixp
>scsi7 : pata_atiixp
>ata6: PATA max UDMA/100 cmd 0xb000 ctl 0xa000 bmdma 0x7000 irq 16
>ata7: PATA max UDMA/100 cmd 0x9000 ctl 0x8000 bmdma 0x7008 irq 16
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>ata6.00: ATAPI: LITE-ON DVDRW LH-20A1P, KL05, max UDMA/66
>ata6.00: limited to UDMA/33 due to 40-wire cable
>ata6.00: configured for UDMA/33
>scsi 6:0:0:0: CD-ROM            LITE-ON  DVDRW LH-20A1P   KL05 PQ: 0 ANSI: 5
>scsi 6:0:0:0: Attached scsi generic sg6 type 5
>ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 22 (level, low) -> IRQ 22
>ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
>ALSA sound/pci/hda/hda_intel.c:732: codec_mask = 0x1
>hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...
>ALSA sound/pci/hda/hda_codec.c:2757: autoconfig: line_outs=4 (0x12/0x16/0x24/0x25/0x0)
>ALSA sound/pci/hda/hda_codec.c:2761:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2765:    hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2773:    inputs: mic=0x17, fmic=0x14, line=0x1a, fline=0x0, cd=0x18, aux=0x0
>firewire_ohci: Added fw-ohci device 0000:03:03.0, OHCI version 1.10
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 6:0:0:0: Attached scsi CD-ROM sr0
>firewire_core: created device fw0: GUID 0011d80000d4651d, S400
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-13, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-11, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-12, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 18
>[drm] Initialized drm 1.1.0 20060810
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>[drm] Initialized radeon 1.28.0 20060524 on minor 0
>Adding 987988k swap on /dev/sda2.  Priority:10 extents:1 across:987988k
>Adding 987988k swap on /dev/sdb2.  Priority:10 extents:1 across:987988k
>warning: process `kudzu' used the deprecated sysctl system call with 1.23.
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>skge eth0: enabling interface
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>skge eth0: Link is up at 1000 Mbps, full duplex, flow control none
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>it87: Found IT8716F chip at 0xe80, revision 0
>it87: in3 is VCC (+5V)
>eth0: no IPv6 routers present
>[drm] Setting GART location based on new memory map
>[drm] Loading R300 Microcode
>[drm] writeback test succeeded in 1 usecs
>hda-intel: Invalid position buffer, using LPIB read method instead.

Actions: View

Attachments on bug 436591: 297268 | 297519