Attachment 297528 Details for Bug 436849 – dmesg output

dmesg output

dmesg.txt (text/plain), 33.64 KB, created by JM on 2008-03-10 22:10:58 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: JM

Created: 2008-03-10 22:10:58 UTC

Size: 33.64 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.24.3-12.fc8 (mockbuild@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Tue Feb 26 14:21:30 EST 2008
>Command line: ro root=/dev/VolGroup00/LogVol00 quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
> BIOS-e820: 000000003fee0000 - 000000003feed000 (ACPI data)
> BIOS-e820: 000000003feed000 - 000000003ff00000 (ACPI NVS)
> BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 261856) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI present.
>ACPI: RSDP 000F7600, 0024 (r2 PTLTD )
>ACPI: XSDT 3FEE877E, 0054 (r1 PTLTD  	 XSDT      50000  LTP        0)
>ACPI: FACP 3FEE8846, 00F4 (r3 FSC                50000         F4240)
>ACPI: DSDT 3FEE893A, 453F (r1 FSC    D2151       50000 MSFT  2000002)
>ACPI: FACS 3FEEDFC0, 0040
>ACPI: ASF! 3FEECE79, 0085 (r16 OEMID  OEMTBL      50000 PTL         1)
>ACPI: MCFG 3FEECEFE, 0040 (r1 PTLTD    MCFG      50000  LTP        0)
>ACPI: HPET 3FEECF3E, 0038 (r1 PTLTD  HPETTBL     50000  LTP        1)
>ACPI: APIC 3FEECF76, 0062 (r1 FSC    	 APIC      50000  CSF        0)
>ACPI: BOOT 3FEECFD8, 0028 (r1 PTLTD  $SBFTBL$    50000  LTP        1)
>ACPI: DMI detected: Fujitsu Siemens
>No NUMA configuration found
>Faking a node at 0000000000000000-000000003fee0000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 261856) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000003fee0000
> [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
> [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
> [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
> [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
> [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
> [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
> [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   261856
>On node 0 totalpages: 261759
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1325 pages reserved
>  DMA zone: 2618 pages, LIFO batch:0
>  DMA32 zone: 3524 pages used for memmap
>  DMA32 zone: 254236 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0xf008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
>swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
>Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 42248 bytes of per cpu data
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 256854
>Policy zone: DMA32
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Extended CMOS year: 2000
>hpet clockevent registered
>TSC calibrated against HPET
>time.c: Detected 3192.084 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 1023156k/1047424k available (2492k kernel code, 23880k reserved, 1390k data, 332k init)
>SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>Calibrating delay using timer specific routine.. 6388.51 BogoMIPS (lpj=3194257)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU 0/0 -> Node 0
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>APIC timer calibration result 12468976
>Detected 12.468 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 6383.71 BogoMIPS (lpj=3191856)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>              Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 03
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=224 bytes
>sizeof(task_struct)=2224 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000000,00000003
>  groups: 00000000,00000001 00000000,00000002
>  domain 1: span 00000000,00000003
>   groups: 00000000,00000003
>   domain 2: span 00000000,00000003
>    groups: 00000000,00000003
>CPU1 attaching sched-domain:
> domain 0: span 00000000,00000003
>  groups: 00000000,00000002 00000000,00000001
>  domain 1: span 00000000,00000003
>   groups: 00000000,00000003
>   domain 2: span 00000000,00000003
>    groups: 00000000,00000003
>net_namespace: 120 bytes
>Time: 21:58:07  Date: 03/10/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: Device [LPT] status [00000008]: functional but not present; setting present
>ACPI: Device [COM2] status [00000008]: functional but not present; setting present
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region f000-f07f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region f180-f1bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXA._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXB._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXC._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXD._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXE._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIH._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 9 10 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *9 10 11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs *9 10 11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 9 10 11) *5
>ACPI: PCI Interrupt Link [LNKG] (IRQs 9 *10 11)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 9 10 *11)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 14 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>DMAR:No DMAR devices found
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Time: tsc clocksource has been installed.
>system 00:01: ioport range 0xcb0-0xcbb has been reserved
>system 00:03: ioport range 0x4d0-0x4d1 has been reserved
>system 00:03: ioport range 0xf000-0xf07f has been reserved
>system 00:03: ioport range 0xf100-0xf10f has been reserved
>system 00:03: ioport range 0xf180-0xf1bf has been reserved
>system 00:03: ioport range 0x800-0x87f has been reserved
>system 00:03: ioport range 0xf820-0xf82f has been reserved
>system 00:03: ioport range 0xfe00-0xfe00 has been reserved
>system 00:03: iomem range 0xfec00000-0xfecfffff could not be reserved
>system 00:03: iomem range 0xfee00000-0xfeefffff could not be reserved
>system 00:03: iomem range 0xfed1c000-0xfed1ffff has been reserved
>system 00:03: iomem range 0xfed13000-0xfed13fff has been reserved
>system 00:03: iomem range 0xfed14000-0xfed17fff has been reserved
>system 00:03: iomem range 0xfed18000-0xfed18fff has been reserved
>system 00:03: iomem range 0xfed19000-0xfed19fff has been reserved
>system 00:03: iomem range 0xd0000000-0xdfffffff has been reserved
>PCI: Failed to allocate mem resource #6:20000@f0000000 for 0000:01:00.0
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: f1000000-f2ffffff
>  PREFETCH window: e0000000-efffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: f3000000-f30fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.2
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.3
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: f3100000-f31fffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>Freeing initrd memory: 3949k freed
>Simple Boot Flag at 0x69 set to 0x80
>audit: initializing netlink socket (disabled)
>audit(1205186287.572:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 224A23E13247065A
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>Allocate Port Service[0000:00:1c.3:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: PS/2 Controller [PNP0303:KEYB,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>registered taskstats version 1
>  Magic number: 0:403:1005
>  hash matches device 00:07
>Freeing unused kernel memory: 332k freed
>Write protecting the kernel read-only data: 1080k
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0004000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 22, io base 0x00002400
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 21, io base 0x00002800
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input2
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 20, io base 0x00002c00
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 1-4: new high speed USB device using ehci_hcd and address 3
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ata_piix 0000:00:1f.2: version 2.12
>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3400 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x3408 irq 15
>usb 1-4: new high speed USB device using ehci_hcd and address 4
>ata1.00: ATA-7: SAMSUNG HD160JJ, ZM100-41, max UDMA7
>ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/133
>usb 1-4: new high speed USB device using ehci_hcd and address 5
>usb 1-4: new high speed USB device using ehci_hcd and address 6
>ata2.00: ATAPI: _NEC DVD_RW ND-4550A, 1.85, max UDMA/33
>ata2.01: ATAPI: HL-DT-STDVD-ROM GDR8164B, 0F08, max UDMA/33
>ata2.00: configured for UDMA/33
>ata2.01: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD160JJ  ZM10 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            _NEC     DVD_RW ND-4550A  1.85 PQ: 0 ANSI: 5
>scsi 1:0:1:0: CD-ROM            HL-DT-ST DVD-ROM GDR8164B 0F08 PQ: 0 ANSI: 5
>usb 1-4: new high speed USB device using ehci_hcd and address 9
>usb 1-4: new high speed USB device using ehci_hcd and address 10
>usb 1-4: new high speed USB device using ehci_hcd and address 11
>usb 1-4: new high speed USB device using ehci_hcd and address 12
>usb 1-4: new high speed USB device using ehci_hcd and address 13
>usb 1-4: new high speed USB device using ehci_hcd and address 16
>usb 1-4: new high speed USB device using ehci_hcd and address 17
>usb 1-4: new high speed USB device using ehci_hcd and address 20
>usb 1-4: new high speed USB device using ehci_hcd and address 21
>usb 1-4: new high speed USB device using ehci_hcd and address 23
>usb 1-4: new high speed USB device using ehci_hcd and address 24
>usb 1-4: new high speed USB device using ehci_hcd and address 27
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb 1-4: new high speed USB device using ehci_hcd and address 37
>usb 1-4: new high speed USB device using ehci_hcd and address 38
>usb 1-4: new high speed USB device using ehci_hcd and address 41
>usb 1-4: new high speed USB device using ehci_hcd and address 45
>usb 1-4: new high speed USB device using ehci_hcd and address 47
>usb 1-4: new high speed USB device using ehci_hcd and address 51
>usb 1-4: new high speed USB device using ehci_hcd and address 56
>usb 1-4: new high speed USB device using ehci_hcd and address 66
>usb 1-4: new high speed USB device using ehci_hcd and address 67
>usb 1-4: new high speed USB device using ehci_hcd and address 68
>usb 1-4: new high speed USB device using ehci_hcd and address 69
>usb 1-4: new high speed USB device using ehci_hcd and address 71
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>usb 1-4: new high speed USB device using ehci_hcd and address 75
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1205186303.085:2): selinux=0 auid=4294967295
>usb 1-4: new high speed USB device using ehci_hcd and address 81
>usb 1-4: new high speed USB device using ehci_hcd and address 84
>usb 1-4: new high speed USB device using ehci_hcd and address 88
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>scsi 1:0:1:0: Attached scsi generic sg2 type 5
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
>sr 1:0:1:0: Attached scsi CD-ROM sr1
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0xf060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>input: Power Button (FF) as /devices/virtual/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/virtual/input/input4
>ACPI: Power Button (CM) [PWRB]
>intel_rng: FWH not detected
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
>usb 1-4: new high speed USB device using ehci_hcd and address 91
>nvidia: module license 'NVIDIA' taints kernel.
>tg3.c:v3.86 (November 9, 2007)
>ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:05:00.0 to 64
>eth0: Tigon3 [partno(BCM95751) rev 4001 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:30:05:c8:4d:f2
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>NVRM: loading NVIDIA UNIX x86_64 Kernel Module  169.12  Thu Feb 14 17:51:09 PST 2008
>input: PC Speaker as /devices/platform/pcspkr/input/input5
>ACPI: PCI Interrupt 0000:0b:07.0[A] -> GSI 21 (level, low) -> IRQ 21
>Floppy drive(s): fd0 is 1.44M
>firewire_ohci: Added fw-ohci device 0000:0b:07.0, OHCI version 1.10
>FDC 0 is a post-1991 82077
>usb 1-4: new high speed USB device using ehci_hcd and address 94
>parport_pc 00:0c: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ALSA sound/pci/hda/hda_intel.c:732: codec_mask = 0x4
>ALSA sound/pci/hda/patch_realtek.c:4880: hda_codec: Unknown model for ALC260, trying auto-probe from BIOS...
>ALSA sound/pci/hda/hda_codec.c:2757: autoconfig: line_outs=1 (0xf/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2761:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2765:    hp_outs=2 (0x11/0x15/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2773:    inputs: mic=0x12, fmic=0x13, line=0x14, fline=0x0, cd=0x16, aux=0x0
>usb 1-4: new high speed USB device using ehci_hcd and address 96
>firewire_core: created device fw0: GUID 0001b700000458ed, S400
>device-mapper: multipath: version 1.0.5 loaded
>usb 1-4: new high speed USB device using ehci_hcd and address 99
>usb 1-4: new high speed USB device using ehci_hcd and address 101
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>usb 1-4: new high speed USB device using ehci_hcd and address 104
>usb 1-4: new high speed USB device using ehci_hcd and address 105
>Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:2031608k
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>warning: process `kudzu' used the deprecated sysctl system call with 1.23.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
>usb 1-4: new high speed USB device using ehci_hcd and address 115
>usb 1-4: new high speed USB device using ehci_hcd and address 120
>usb 1-4: new high speed USB device using ehci_hcd and address 121
>usb 1-4: new high speed USB device using ehci_hcd and address 123
>usb 1-4: new high speed USB device using ehci_hcd and address 124
>usb 1-4: new high speed USB device using ehci_hcd and address 125
>usb 1-4: new high speed USB device using ehci_hcd and address 127
>usb 1-4: new high speed USB device using ehci_hcd and address 2
>usb 1-4: new high speed USB device using ehci_hcd and address 4
>usb 1-4: new high speed USB device using ehci_hcd and address 6
>usb 1-4: new high speed USB device using ehci_hcd and address 8
>usb 1-4: new high speed USB device using ehci_hcd and address 9
>tg3: eth0: Link is up at 100 Mbps, full duplex.
>tg3: eth0: Flow control is off for TX and off for RX.
>usb 1-4: new high speed USB device using ehci_hcd and address 10
>usb 1-4: new high speed USB device using ehci_hcd and address 15
>usb 1-4: new high speed USB device using ehci_hcd and address 17
>usb 1-4: new high speed USB device using ehci_hcd and address 19
>usb 1-4: new high speed USB device using ehci_hcd and address 21
>usb 1-4: new high speed USB device using ehci_hcd and address 23
>usb 1-4: new high speed USB device using ehci_hcd and address 26
>usb 1-4: new high speed USB device using ehci_hcd and address 27
>usb 1-4: new high speed USB device using ehci_hcd and address 28
>usb 1-4: new high speed USB device using ehci_hcd and address 31
>usb 1-4: new high speed USB device using ehci_hcd and address 36
>usb 1-4: new high speed USB device using ehci_hcd and address 40
>usb 1-4: new high speed USB device using ehci_hcd and address 42
>usb 1-4: new high speed USB device using ehci_hcd and address 43
>usb 1-4: new high speed USB device using ehci_hcd and address 50
>usb 1-4: new high speed USB device using ehci_hcd and address 52
>usb 1-4: new high speed USB device using ehci_hcd and address 53
>usb 1-4: new high speed USB device using ehci_hcd and address 55
>usb 1-4: new high speed USB device using ehci_hcd and address 56
>usb 1-4: new high speed USB device using ehci_hcd and address 59
>usb 1-4: new high speed USB device using ehci_hcd and address 61
>usb 1-4: new high speed USB device using ehci_hcd and address 62
>usb 1-4: new high speed USB device using ehci_hcd and address 63
>usb 1-4: new high speed USB device using ehci_hcd and address 64
>usb 1-4: new high speed USB device using ehci_hcd and address 66
>usb 1-4: new high speed USB device using ehci_hcd and address 70
>usb 1-4: new high speed USB device using ehci_hcd and address 71
>usb 1-4: new high speed USB device using ehci_hcd and address 72
>usb 1-4: new high speed USB device using ehci_hcd and address 74
>usb 1-4: new high speed USB device using ehci_hcd and address 75
>usb 1-4: new high speed USB device using ehci_hcd and address 78
>usb 1-4: new high speed USB device using ehci_hcd and address 81
>usb 1-4: new high speed USB device using ehci_hcd and address 83
>usb 1-4: new high speed USB device using ehci_hcd and address 89
>usb 1-4: new high speed USB device using ehci_hcd and address 90
>usb 1-4: new high speed USB device using ehci_hcd and address 92
>usb 1-4: new high speed USB device using ehci_hcd and address 93
>usb 1-4: new high speed USB device using ehci_hcd and address 95
>usb 1-4: new high speed USB device using ehci_hcd and address 96
>usb 1-4: new high speed USB device using ehci_hcd and address 97
>usb 1-4: new high speed USB device using ehci_hcd and address 100
>usb 1-4: new high speed USB device using ehci_hcd and address 101
>usb 1-4: new high speed USB device using ehci_hcd and address 104
>usb 1-4: new high speed USB device using ehci_hcd and address 105
>usb 1-4: new high speed USB device using ehci_hcd and address 106
>usb 1-4: new high speed USB device using ehci_hcd and address 108
>usb 1-4: new high speed USB device using ehci_hcd and address 115
>usb 1-4: new high speed USB device using ehci_hcd and address 118
>usb 1-4: new high speed USB device using ehci_hcd and address 119
>usb 1-4: new high speed USB device using ehci_hcd and address 126
>usb 1-4: new high speed USB device using ehci_hcd and address 127
>usb 1-4: new high speed USB device using ehci_hcd and address 2
>usb 1-4: new high speed USB device using ehci_hcd and address 3
>usb 1-4: new high speed USB device using ehci_hcd and address 5
>usb 1-4: new high speed USB device using ehci_hcd and address 9
>usb 1-4: new high speed USB device using ehci_hcd and address 10
>usb 1-4: new high speed USB device using ehci_hcd and address 14
>usb 1-4: new high speed USB device using ehci_hcd and address 16
>usb 1-4: new high speed USB device using ehci_hcd and address 17
>usb 1-4: new high speed USB device using ehci_hcd and address 18
>usb 1-4: new high speed USB device using ehci_hcd and address 20
>usb 1-4: new high speed USB device using ehci_hcd and address 22
>usb 1-4: new high speed USB device using ehci_hcd and address 24
>usb 1-4: new high speed USB device using ehci_hcd and address 25
>usb 1-4: new high speed USB device using ehci_hcd and address 26
>usb 1-4: new high speed USB device using ehci_hcd and address 28
>usb 1-4: new high speed USB device using ehci_hcd and address 31
>usb 1-4: new high speed USB device using ehci_hcd and address 33
>usb 1-4: new high speed USB device using ehci_hcd and address 34
>usb 1-4: new high speed USB device using ehci_hcd and address 37
>usb 1-4: new high speed USB device using ehci_hcd and address 39
>usb 1-4: new high speed USB device using ehci_hcd and address 41
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>usb 1-4: new high speed USB device using ehci_hcd and address 42
>usb 1-4: new high speed USB device using ehci_hcd and address 45
>usb 1-4: new high speed USB device using ehci_hcd and address 48
>usb 1-4: new high speed USB device using ehci_hcd and address 50
>usb 1-4: new high speed USB device using ehci_hcd and address 51
>usb 1-4: new high speed USB device using ehci_hcd and address 53
>audit(1205186350.955:3): audit_pid=2073 old=0 by auid=4294967295
>usb 1-4: new high speed USB device using ehci_hcd and address 55
>usb 1-4: new high speed USB device using ehci_hcd and address 56
>usb 1-4: new high speed USB device using ehci_hcd and address 60
>usb 1-4: new high speed USB device using ehci_hcd and address 61
>usb 1-4: new high speed USB device using ehci_hcd and address 63
>usb 1-4: new high speed USB device using ehci_hcd and address 65
>usb 1-4: new high speed USB device using ehci_hcd and address 66
>usb 1-4: new high speed USB device using ehci_hcd and address 71
>usb 1-4: new high speed USB device using ehci_hcd and address 73
>usb 1-4: new high speed USB device using ehci_hcd and address 76
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>usb 1-4: new high speed USB device using ehci_hcd and address 81
>usb 1-4: new high speed USB device using ehci_hcd and address 82
>usb 1-4: new high speed USB device using ehci_hcd and address 83
>usb 1-4: new high speed USB device using ehci_hcd and address 84
>usb 1-4: new high speed USB device using ehci_hcd and address 85
>usb 1-4: new high speed USB device using ehci_hcd and address 86
>usb 1-4: new high speed USB device using ehci_hcd and address 88
>usb 1-4: new high speed USB device using ehci_hcd and address 89
>usb 1-4: new high speed USB device using ehci_hcd and address 90
>usb 1-4: new high speed USB device using ehci_hcd and address 93
>usb 1-4: new high speed USB device using ehci_hcd and address 95
>usb 1-4: new high speed USB device using ehci_hcd and address 96
>usb 1-4: new high speed USB device using ehci_hcd and address 99
>usb 1-4: new high speed USB device using ehci_hcd and address 106
>usb 1-4: new high speed USB device using ehci_hcd and address 110
>usb 1-4: new high speed USB device using ehci_hcd and address 112
>usb 1-4: new high speed USB device using ehci_hcd and address 113
>usb 1-4: new high speed USB device using ehci_hcd and address 114
>usb 1-4: new high speed USB device using ehci_hcd and address 124
>usb 1-4: new high speed USB device using ehci_hcd and address 126
>usb 1-4: new high speed USB device using ehci_hcd and address 127
>usb 1-4: new high speed USB device using ehci_hcd and address 6
>usb 1-4: new high speed USB device using ehci_hcd and address 7
>usb 1-4: new high speed USB device using ehci_hcd and address 8
>usb 1-4: new high speed USB device using ehci_hcd and address 11
>usb 1-4: new high speed USB device using ehci_hcd and address 14
>usb 1-4: new high speed USB device using ehci_hcd and address 15
>usb 1-4: new high speed USB device using ehci_hcd and address 19
>usb 1-4: new high speed USB device using ehci_hcd and address 20
>usb 1-4: new high speed USB device using ehci_hcd and address 22
>usb 1-4: new high speed USB device using ehci_hcd and address 24
>usb 1-4: new high speed USB device using ehci_hcd and address 26
>usb 1-4: new high speed USB device using ehci_hcd and address 29
>usb 1-4: new high speed USB device using ehci_hcd and address 32
>usb 1-4: new high speed USB device using ehci_hcd and address 33
>usb 1-4: new high speed USB device using ehci_hcd and address 37
>usb 1-4: new high speed USB device using ehci_hcd and address 40
>usb 1-4: new high speed USB device using ehci_hcd and address 41
>usb 1-4: new high speed USB device using ehci_hcd and address 42

Actions: View

Attachments on bug 436849: 297510 | 297528 | 297529