Attachment 297569 Details for Bug 431941 – dmesg-vmware-eth0.txt

dmesg-vmware-eth0.txt

dmesg-vmware-eth0.txt (text/plain), 24.01 KB, created by Andrew Farris on 2008-03-11 07:01:13 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Andrew Farris

Created: 2008-03-11 07:01:13 UTC

Size: 24.01 KB

patch

obsolete

> - dmesg
>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.25-0.95.rc4.fc9 (mockbuild@) (gcc version 4.3.0 20080229 (Red Hat 4.3.0-0.13) (GCC) ) #1 SMP Thu Mar 6 00:50:28 EST 2008
>Command line: ro root=LABEL=/ quiet vga=36A 3
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000002fef0000 (usable)
> BIOS-e820: 000000002fef0000 - 000000002feff000 (ACPI data)
> BIOS-e820: 000000002feff000 - 000000002ff00000 (ACPI NVS)
> BIOS-e820: 000000002ff00000 - 0000000030000000 (usable)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 196336) 1 entries of 3200 used
>Entering add_active_range(0, 196352, 196608) 2 entries of 3200 used
>end_pfn_map = 1048576
>DMI present.
>ACPI: RSDP 000F6C60, 0014 (r0 PTLTD )
>ACPI: RSDT 2FEFAB68, 0030 (r1 PTLTD    RSDT    6040000  LTP        0)
>ACPI: FACP 2FEFEF14, 0074 (r1 INTEL  440BX     6040000 PTL     F4240)
>ACPI: DSDT 2FEFAB98, 437C (r1 PTLTD  Custom    6040000 MSFT  100000D)
>ACPI: FACS 2FEFFFC0, 0040
>ACPI: APIC 2FEFEF88, 0050 (r1 PTLTD  	 APIC    6040000  LTP        0)
>ACPI: BOOT 2FEFEFD8, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000030000000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 196336) 1 entries of 3200 used
>Entering add_active_range(0, 196352, 196608) 2 entries of 3200 used
>Bootmem setup node 0 0000000000000000-0000000030000000
>  NODE_DATA [000000000000b000 - 0000000000012fff]
>  bootmap [0000000000013000 -  0000000000018fff] pages 6
>early res: 0 [0-fff] BIOS data page
>early res: 1 [6000-7fff] SMP_TRAMPOLINE
>early res: 2 [200000-bf5b57] TEXT DATA BSS
>early res: 3 [2fc10000-2fedfde0] RAMDISK
>early res: 4 [9f800-a07ff] EBDA
>early res: 5 [8000-afff] PGTABLE
> [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
> [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001400000 on node 0
> [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001800000 on node 0
> [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001c00000 on node 0
> [ffffe20000800000-ffffe200009fffff] PMD ->ffff810001e00000 on node 0
> [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002200000 on node 0
> [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002600000 on node 0
> [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002800000 on node 0
> [ffffe20001000000-ffffe200011fffff] PMD ->ffff810002c00000 on node 0
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   196336
>    0:   196352 ->   196608
>On node 0 totalpages: 196495
>  DMA zone: 96 pages used for memmap
>  DMA zone: 2558 pages reserved
>  DMA zone: 1345 pages, LIFO batch:0
>  DMA32 zone: 4512 pages used for memmap
>  DMA32 zone: 187984 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000ca000
>PM: Registered nosave memory: 00000000000ca000 - 00000000000cc000
>PM: Registered nosave memory: 00000000000cc000 - 00000000000dc000
>PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
>PM: Registered nosave memory: 000000002fef0000 - 000000002feff000
>PM: Registered nosave memory: 000000002feff000 - 000000002ff00000
>Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
>SMP: Allowing 1 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 436896 bytes of per cpu data
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 189329
>Policy zone: DMA32
>Kernel command line: ro root=LABEL=/ quiet vga=36A 3
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC calibrated against PM_TIMER
>time.c: Detected 2162.043 MHz processor.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          48
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1712 kB
> per task-struct memory footprint: 3456 bytes
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 753816k/786432k available (2718k kernel code, 32164k reserved, 1460k data, 740k init)
>CPA: page pool initialized 16 of 16 pages preallocated
>SLUB: Genslabs=13, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 4345.92 BogoMIPS (lpj=2172962)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 0/0 -> Node 0
>SMP alternatives: switching to UP code
>debug: unmapping init memory ffffffff814c3000..ffffffff814ca000
>checking if image is initramfs... it is
>debug: unmapping init memory ffff81002fc10000..ffff81002fee0000
>ACPI: Core revision 20070126
>ACPI: Checking initramfs for custom DSDT
>Using local APIC timer interrupts.
>APIC timer calibration result 4125080
>Detected 4.125 MHz APIC timer.
>Brought up 1 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=96 bytes
>sizeof(inode)=1088 bytes
>sizeof(dentry)=256 bytes
>sizeof(ext3inode)=1488 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=224 bytes
>sizeof(task_struct)=9968 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000000,00000001
>  groups: 00000000,00000001
>khelper used greatest stack depth: 5784 bytes left
>net_namespace: 1152 bytes
>Time: 23:40:01  Date: 03/10/08
>NET: Registered protocol family 16
>khelper used greatest stack depth: 5448 bytes left
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>------------[ cut here ]------------
>WARNING: at arch/x86/mm/ioremap.c:138 __ioremap+0xf7/0x1d9() (Not tainted)
>Modules linked in:
>Pid: 1, comm: swapper Not tainted 2.6.25-0.95.rc4.fc9 #1
>
>Call Trace:
> [<ffffffff8103446c>] warn_on_slowpath+0x60/0x8e
> [<ffffffff810ee7e7>] ? proc_mkdir_mode+0x3d/0x53
> [<ffffffff810ee80e>] ? proc_mkdir+0x11/0x13
> [<ffffffff81078278>] ? register_handler_proc+0xe1/0xf9
> [<ffffffff81022053>] __ioremap+0xf7/0x1d9
> [<ffffffff81022150>] ioremap_nocache+0xb/0xf
> [<ffffffff81293104>] acpi_os_map_memory+0x13/0x1c
> [<ffffffff81179884>] acpi_tb_verify_table+0x29/0x5b
> [<ffffffff81179054>] acpi_get_table_by_index+0x5d/0x95
> [<ffffffff8116af94>] acpi_ev_init_global_lock_handler+0x1a/0x6a
> [<ffffffff81169e18>] acpi_ev_install_xrupt_handlers+0x30/0x61
> [<ffffffff8117b76f>] acpi_enable_subsystem+0x78/0x99
> [<ffffffff814e8797>] acpi_init+0x71/0x21c
> [<ffffffff811b8565>] ? class_create+0x55/0x74
> [<ffffffff814ca506>] kernel_init+0x1f8/0x36d
> [<ffffffff812a1341>] ? _spin_unlock_irq+0x2b/0x30
> [<ffffffff812a0d8e>] ? trace_hardirqs_on_thunk+0x35/0x3a
> [<ffffffff81053957>] ? trace_hardirqs_on+0xf1/0x115
> [<ffffffff8100cf78>] child_rip+0xa/0x12
> [<ffffffff8100c68f>] ? restore_args+0x0/0x30
> [<ffffffff814ca30e>] ? kernel_init+0x0/0x36d
> [<ffffffff8100cf6e>] ? child_rip+0x0/0x12
>
>---[ end trace ca143223eefdc828 ]---
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI
>pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB
>PCI: Transparent bridge - 0000:00:11.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>DMAR:parse DMAR table failure.
>PCI-GART: No AMD northbridge found.
>Time: tsc clocksource has been installed.
>system 00:01: ioport range 0x1000-0x103f has been reserved
>system 00:01: ioport range 0x1040-0x104f has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:11.0
>  IO window: 2000-2fff
>  MEM window: 0xe8900000-0xe89fffff
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 18 (level, low) -> IRQ 18
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
>TCP bind hash table entries: 65536 (order: 10, 4194304 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>Simple Boot Flag at 0x36 set to 0x80
>audit: initializing netlink socket (disabled)
>type=2000 audit(1205192401.586:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:00.0: Limiting direct PCI/PCI transfers
>pci 0000:00:0f.0: Boot video device
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>vesafb: framebuffer at 0xf0000000, mapped to 0xffffc20000800000, using 3072k, total 16384k
>vesafb: mode is 1024x768x16, linelength=2048, pages=0
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>agpgart: Detected an Intel 440BX Chipset.
>agpgart: AGP aperture is 256M @ 0x0
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>Switched to high resolution mode on CPU 0
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>isa bounce pool size: 16 pages
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUS] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>registered taskstats version 1
>  Magic number: 0:306:706
>debug: unmapping init memory ffffffff814ca000..ffffffff81583000
>Write protecting the kernel read-only data: 1144k
>ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>ehci_hcd 0000:02:02.0: EHCI Host Controller
>ehci_hcd 0000:02:02.0: new USB bus registered, assigned bus number 1
>PCI: cache line size of 32 is not supported by device 0000:02:02.0
>ehci_hcd 0000:02:02.0: irq 16, io mem 0xe8920000
>ehci_hcd 0000:02:02.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input2
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25-0.95.rc4.fc9 ehci_hcd
>usb usb1: SerialNumber: 0000:02:02.0
>modprobe used greatest stack depth: 4216 bytes left
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:07.2[D] -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:07.2: UHCI Host Controller
>uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:07.2: irq 19, io base 0x00001060
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25-0.95.rc4.fc9 uhci_hcd
>usb usb2: SerialNumber: 0000:00:07.2
>modprobe used greatest stack depth: 4200 bytes left
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>Fusion MPT base driver 3.04.06
>Copyright (c) 1999-2007 LSI Corporation
>Fusion MPT SPI Host driver 3.04.06
>ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 17 (level, low) -> IRQ 17
>mptbase: ioc0: Initiating bringup
>ioc0: LSI53C1030 B0: Capabilities={Initiator}
>scsi0 : ioc0: LSI53C1030 B0, FwRev=01032920h, Ports=1, MaxQ=128, IRQ=17
>scsi 0:0:0:0: Direct-Access     VMware,  VMware Virtual S 1.0  PQ: 0 ANSI: 2
> target0:0:0: Beginning Domain Validation
> target0:0:0: Domain Validation skipping write tests
> target0:0:0: Ending Domain Validation
> target0:0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 127)
>modprobe used greatest stack depth: 4136 bytes left
>scsi 0:0:1:0: Direct-Access     VMware,  VMware Virtual S 1.0  PQ: 0 ANSI: 2
> target0:0:1: Beginning Domain Validation
> target0:0:1: Domain Validation skipping write tests
> target0:0:1: Ending Domain Validation
> target0:0:1: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 127)
>scsi: waiting for bus probes to complete ...
>sd 0:0:0:0: [sda] 31457280 512-byte hardware sectors (16106 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 5d 00 00 00
>sd 0:0:0:0: [sda] Cache data unavailable
>sd 0:0:0:0: [sda] Assuming drive cache: write through
>sd 0:0:0:0: [sda] 31457280 512-byte hardware sectors (16106 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 5d 00 00 00
>sd 0:0:0:0: [sda] Cache data unavailable
>sd 0:0:0:0: [sda] Assuming drive cache: write through
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>sd 0:0:1:0: [sdb] 31457280 512-byte hardware sectors (16106 MB)
>sd 0:0:1:0: [sdb] Write Protect is off
>sd 0:0:1:0: [sdb] Mode Sense: 5d 00 00 00
>sd 0:0:1:0: [sdb] Cache data unavailable
>sd 0:0:1:0: [sdb] Assuming drive cache: write through
>sd 0:0:1:0: [sdb] 31457280 512-byte hardware sectors (16106 MB)
>sd 0:0:1:0: [sdb] Write Protect is off
>sd 0:0:1:0: [sdb] Mode Sense: 5d 00 00 00
>sd 0:0:1:0: [sdb] Cache data unavailable
>sd 0:0:1:0: [sdb] Assuming drive cache: write through
> sdb: sdb1
>sd 0:0:1:0: [sdb] Attached SCSI disk
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>type=1404 audit(1205192404.544:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>SELinux:8192 avtab hash slots allocated. Num of rules:154354
>SELinux:8192 avtab hash slots allocated. Num of rules:154354
>security:  8 users, 12 roles, 2268 types, 110 bools, 1 sens, 1024 cats
>security:  72 classes, 154354 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda3, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>type=1403 audit(1205192405.208:3): policy loaded auid=4294967295 ses=4294967295
>mount used greatest stack depth: 3920 bytes left
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:1:0: Attached scsi generic sg1 type 0
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>libata version 3.00 loaded.
>input: Power Button (FF) as /devices/virtual/input/input3
>ACPI: Power Button (FF) [PWRF]
>ACPI: AC Adapter [ACAD] (on-line)
>ata_piix 0000:00:07.1: version 2.12
>scsi1 : ata_piix
>ACPI: Battery Slot [BAT1] (battery present)
>scsi2 : ata_piix
>ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1050 irq 14
>ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1058 irq 15
>ata1.00: ATAPI: VMware Virtual IDE CDROM Drive, 00000001, max UDMA/33
>ata1.00: configured for UDMA/33
>ata2.00: ATAPI: VMware Virtual IDE CDROM Drive, 00000001, max UDMA/33
>ata2.00: configured for UDMA/33
>scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRW  GSA-S10N  BP08 PQ: 0 ANSI: 5
>scsi 1:0:0:0: Attached scsi generic sg2 type 5
>scsi 2:0:0:0: CD-ROM            NECVMWar VMware IDE CDR10 1.00 PQ: 0 ANSI: 5
>scsi 2:0:0:0: Attached scsi generic sg3 type 5
>modprobe used greatest stack depth: 3832 bytes left
>Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>e1000: 0000:02:00.0: e1000_probe: (PCI:66MHz:32-bit) 00:0c:29:f1:fa:bd
>input: PC Speaker as /devices/platform/pcspkr/input/input4
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>parport_pc 00:08: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sr1: scsi3-mmc drive: 1x/1x writer xa/form2 cdda tray
>sr 2:0:0:0: Attached scsi CD-ROM sr1
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 19 (level, low) -> IRQ 19
>ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:02:03.0 to 64
>e1000: 0000:02:03.0: e1000_probe: (PCI:66MHz:32-bit) 00:0c:29:f1:fa:c7
>e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda3, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdb1, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 1542232k swap on /dev/sda2.  Priority:-1 extents:1 across:1542232k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>rc.sysinit used greatest stack depth: 3696 bytes left
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>warning: process `kudzu' used the deprecated sysctl system call with 1.23.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (6144 buckets, 24576 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
>type=1400 audit(1205217645.496:4): avc:  denied  { write } for  pid=1700 comm="cp" name="resolv.conf.predhclient.eth0" dev=sda3 ino=426021 scontext=system_u:system_r:dhcpc_t:s0 tcontext=unconfined_u:object_r:etc_t:s0 tclass=file
>type=1400 audit(1205217645.496:5): avc:  denied  { unlink } for  pid=1700 comm="cp" name="resolv.conf.predhclient.eth0" dev=sda3 ino=426021 scontext=system_u:system_r:dhcpc_t:s0 tcontext=unconfined_u:object_r:etc_t:s0 tclass=file
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>eth0: no IPv6 routers present
>Loading iSCSI transport class v2.0-868.
>iscsi: registered transport (tcp)
>iscsi: registered transport (iser)
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>fuse init (API version 7.9)
>SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>coretemp coretemp.0: Using relative temperature scale!
>type=1400 audit(1205217670.322:6): avc:  denied  { read } for  pid=2092 comm="rsyslogd" name="System.map-2.6.25-0.95.rc4.fc9" dev=sda1 ino=6045 scontext=system_u:system_r:syslogd_t:s0 tcontext=system_u:object_r:system_map_t:s0 tclass=file
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>warning: process `python2' used the deprecated sysctl system call with 1.23.
>warning: process `python2' used the deprecated sysctl system call with 1.23.
>warning: process `python2' used the deprecated sysctl system call with 1.23.
>warning: process `python2' used the deprecated sysctl system call with 1.23.
>e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
>eth0: no IPv6 routers present
>

Actions: View

Attachments on bug 431941: 294477 | 297569 | 297570