Attachment 297688 Details for Bug 437056 – from fc6: full dmesg and other info

from fc6: full dmesg and other info

pcmcia-flash-fc6.txt (text/plain), 41.37 KB, created by Charles R. Anderson on 2008-03-11 23:35:08 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Charles R. Anderson

Created: 2008-03-11 23:35:08 UTC

Size: 41.37 KB

patch

obsolete

>Script started on Tue 11 Mar 2008 08:04:11 PM EDT
>
>sh-3.1# pccardctl info
>PRODID_1="SunDisk"
>PRODID_2="SDP"
>PRODID_3="5/3 0.6"
>PRODID_4=""
>MANFID=0045,0401
>FUNCID=4
>PRODID_1=""
>PRODID_2=""
>PRODID_3=""
>PRODID_4=""
>MANFID=0000,0000
>FUNCID=255
>
>sh-3.1# pccardctl status
>Socket 0:
>  5.0V 16-bit PC Card
>  Subdevice 0 (function 0) bound to driver "ide-cs"
>Socket 1:
>  no card
>
>sh-3.1# pccardctl ident
>Socket 0:
>  product info: "SunDisk", "SDP", "5/3 0.6", ""
>  manfid: 0x0045, 0x0401
>  function: 4 (fixed disk)
>Socket 1:
>  no product info available
>
>sh-3.1# pccardctl ls
>Socket 0 Bridge:   	[yenta_cardbus] 	(bus ID: 0000:00:0a.0)
>Socket 0 Device 0:	[ide-cs]		(bus ID: 0.0)
>Socket 1 Bridge:   	[yenta_cardbus] 	(bus ID: 0000:00:0a.1)
>
>sh-3.1# cat  /proc/scsi/scsi
>Attached devices:
>
>sh-3.1# hdparm -i /dev/s[Khde
>
>/dev/hde:
>
> Model=SanDisk SDP3B-128, FwRev=Vdg 1.21, SerialNo=05070208198
> Config={ HardSect NotMFM Removeable DTR>10Mbs nonMagnetic }
> RawCHS=980/8/32, TrkSize=0, SectSize=576, ECCbytes=4
> BuffType=DualPort, BuffSize=1kB, MaxMultSect=1, MultSect=off
> CurCHS=980/8/32, CurSects=250880, LBA=yes, LBAsects=250880
> IORDY=no, tPIO={min:120,w/IORDY:120}
> PIO modes:  pio0 pio1 pio2 pio3 pio4 
> AdvancedPM=no
>
> * signifies the current active mode
>
>sh-3.1# hdparm -I /dev/hde
>
>/dev/hde:
>
>CompactFlash ATA device, with removable media
>	Model Number:       SanDisk SDP3B-128                       
>	Serial Number:      05070208198
>	Firmware Revision:  Vdg 1.21
>Standards:
>	Likely used: 4
>Configuration:
>	Logical		max	current
>	cylinders	980	980
>	heads		8	8
>	sectors/track	32	32
>	--
>	bytes/track: 0	bytes/sector: 576
>	CHS current addressable sectors:     250880
>	LBA    user addressable sectors:     250880
>	device size with M = 1024*1024:         122 MBytes
>	device size with M = 1000*1000:         128 MBytes 
>Capabilities:
>	LBA, IORDY(may be)(cannot be disabled)
>	Buffer size: 1.0kB	bytes avail on r/w long: 4
>	Standby timer values: spec'd by Vendor
>	R/W multiple sector transfer: Max = 1	Current = 0
>	DMA: not supported
>	PIO: pio0 pio1 pio2 pio3 pio4 
>	     Cycle time: no flow control=120ns  IORDY flow control=120ns
>sh-3.1# /[Khdparm -a /dev/hde
>
>/dev/hde:
> readahead    = 256 (on)
>
>sh-3.1# hdparm --all /dev/hde
>
>/dev/hde:
> multcount    =  0 (off)
> IO_support   =  0 (default 16-bit)
> unmaskirq    =  0 (off)
> using_dma    =  0 (off)
> keepsettings =  0 (off)
> readonly     =  0 (off)
> readahead    = 256 (on)
> geometry     = 980/8/32, sectors = 250880, start = 0
>
>sh-3.1# dmesg
>Linux version 2.6.22.14-72.fc6 (brewbuilder@hs20-bc2-4.build.redhat.com) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-13)) #1 SMP Wed Nov 21 13:44:07 EST 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e8400 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000017ff0000 (usable)
> BIOS-e820: 0000000017ff0000 - 0000000017fffc00 (ACPI data)
> BIOS-e820: 0000000017fffc00 - 0000000018000000 (ACPI NVS)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>383MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 98288) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->    98288
>  HighMem     98288 ->    98288
>early_node_map[1] active PFN ranges
>    0:        0 ->    98288
>On node 0 totalpages: 98288
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 735 pages used for memmap
>  Normal zone: 93457 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000F6770, 0014 (r0 HP-MCD)
>ACPI: RSDT 17FF59B8, 002C (r1 HP-MCD EA RSDT   1820000  LTP        0)
>ACPI: FACP 17FFFB65, 0074 (r1 HP-MCD EA FACP   1820000 HP    1000000)
>ACPI: DSDT 17FF59E4, A181 (r1 HP-MCD EA DSDT   1820000 MSFT  100000B)
>ACPI: FACS 17FFFFC0, 0040
>ACPI: BOOT 17FFFBD9, 0027 (r1 PTLTD  EABFTBL$  1820000  LTP        1)
>ACPI: PM-Timer IO Port: 0x8008
>Allocating PCI resources starting at 20000000 (gap: 18000000:e7f80000)
>Built 1 zonelists.  Total pages: 97521
>Kernel command line: ro root=/dev/q/root single
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffd000 (0130d000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07be000 soft=c079e000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Detected 597.432 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 382216k/393152k available (2221k kernel code, 10336k reserved, 1179k data, 260k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc55000 - 0xfffff000   (3752 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xd8800000 - 0xff7fe000   ( 623 MB)
>    lowmem  : 0xc0000000 - 0xd7ff0000   ( 383 MB)
>      .init : 0xc0758000 - 0xc0799000   ( 260 kB)
>      .data : 0xc062b7f0 - 0xc0752584   (1179 kB)
>      .text : 0xc0400000 - 0xc062b7f0   (2221 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 1195.51 BogoMIPS (lpj=597757)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 256K
>CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>ACPI: setting ELCR to 0200 (from 0420)
>CPU0: Intel Pentium III (Coppermine) stepping 03
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1536 bytes
>Time: 17:32:28  Date: 01/28/108
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd980, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 8000-803f claimed by PIIX4 ACPI
>PCI quirk: region 2180-218f claimed by PIIX4 SMB
>PIIX4 devres E PIO at 0378-037f
>PIIX4 devres I PIO at 0398-0399
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *5 6)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *10)
>ACPI: Power Resource [PFAN] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:00: iomem range 0xc0000-0xc3fff could not be reserved
>Time: tsc clocksource has been installed.
>pnp: 00:00: iomem range 0xc4000-0xc7fff could not be reserved
>pnp: 00:00: iomem range 0xc8000-0xcbfff could not be reserved
>pnp: 00:00: iomem range 0xcc000-0xcffff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: 9000-9fff
>  MEM window: f4100000-f5ffffff
>  PREFETCH window: 30000000-300fffff
>PCI: Bus 2, cardbus bridge: 0000:00:0a.0
>  IO window: 00002000-000020ff
>  IO window: 00002400-000024ff
>  PREFETCH window: 20000000-23ffffff
>  MEM window: 24000000-27ffffff
>PCI: Bus 6, cardbus bridge: 0000:00:0a.1
>  IO window: 00002800-000028ff
>  IO window: 00002c00-00002cff
>  PREFETCH window: 28000000-2bffffff
>  MEM window: 2c000000-2fffffff
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:0a.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:0a.1 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 196608 bytes)
>TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2274k freed
>Simple Boot Flag at 0x36 set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1204219948.976:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 27C1E7C39C54B670
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Limiting direct PCI/PCI transfers.
>Boot video device is 0000:01:00.0
>ACPI: Transitioning device [FAN] to D3
>ACPI: Transitioning device [FAN] to D3
>ACPI: Fan [FAN] (off)
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>Marking TSC unstable due to: possible TSC halt in C2.
>Time: acpi_pm clocksource has been installed.
>ACPI: Thermal Zone [THRM] (69 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected an Intel 440BX Chipset.
>agpgart: AGP aperture is 64M @ 0xf8000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>PIIX4: IDE controller at PCI slot 0000:00:07.1
>PIIX4: chipset revision 1
>PIIX4: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x1c20-0x1c27, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0x1c28-0x1c2f, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>Clocksource tsc unstable (delta = -314381196 ns)
>hda: IC25N040ATCS04-0, ATA DISK drive
>hda: selected mode 0x42
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: CD-224E, ATAPI CD/DVD-ROM drive
>hdc: selected mode 0x42
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 128KiB
>hda: 78140160 sectors (40007 MB) w/1768KiB Cache, CHS=65535/16/63, UDMA(33)
>hda: cache flushes not supported
> hda: hda1 hda2 hda3 hda4 < hda5 >
>ide-floppy driver 0.99.newide
>Yenta: CardBus bridge found at 0000:00:0a.0 [103c:0010]
>Yenta: Enabling burst memory read transactions
>Yenta: Using INTVAL to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:00:0a.0, mfunc 0x012c1272, devctl 0x66
>Yenta: ISA IRQ mask 0x08b8, PCI irq 10
>Socket status: 30000006
>Yenta: CardBus bridge found at 0000:00:0a.1 [103c:0010]
>Yenta: Using INTVAL to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:00:0a.1, mfunc 0x012c1272, devctl 0x66
>Yenta: ISA IRQ mask 0x08b8, PCI irq 10
>Socket status: 30000010
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 12:360:543
>Freeing unused kernel memory: 260k freed
>Write protecting the kernel read-only data: 904k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
>uhci_hcd 0000:00:07.2: UHCI Host Controller
>uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:07.2: irq 10, io base 0x00001c00
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>Synaptics Touchpad, model: 1, fw: 5.4, id: 0x9b54b1, caps: 0x844793/0x0
>serio: Synaptics pass-through port at isa0060/serio1/input0
>pccard: PCMCIA card inserted into slot 1
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>SCSI subsystem initialized
>libata version 2.21 loaded.
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1204219956.143:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1676 types, 213 bools, 1 sens, 1024 cats
>security:  61 classes, 58427 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1204219956.628:3): policy loaded auid=4294967295
>IBM TrackPoint firmware: 0x0b, buttons: 2/3
>input: TPPS/2 IBM TrackPoint as /class/input/input3
>hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>parport_pc 00:0a: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>3c59x: Donald Becker and others.
>0000:00:0b.0: 3Com PCI 3c556 Laptop Tornado at d88dc400.
>cs: IO port probe 0x100-0x3af: excluding 0x398-0x39f
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0x100-0x3af: excluding 0x398-0x39f
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>cs: memory probe 0xa0000000-0xa0ffffff: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
>pcmcia: registering new device pcmcia1.0
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a National Semiconductor PC87306
>eth1: NE2000 (DL10022 rev 05): io 0x300, irq 3, hw_addr 00:04:5A:95:F4:F9
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>ACPI: AC Adapter [ACAD] (on-line)
>ACPI: Battery Slot [BAT1] (battery present)
>ACPI: Battery Slot [BAT2] (battery absent)
>ACPI: ACPI Dock Station Driver 
>ACPI: \_SB_.PCI0.IDE_.SECN.MAST: found ejectable bay
>ACPI: \_SB_.PCI0.IDE_.SECN.MAST: Adding notify handler
>ACPI: Bay [\_SB_.PCI0.IDE_.SECN.MAST] Added
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /class/input/input5
>ACPI: Lid Switch [LID]
>input: Sleep Button (CM) as /class/input/input6
>ACPI: Sleep Button (CM) [SLP]
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev hda3, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 786424k swap on /dev/q/swap.  Priority:-1 extents:1 across:786424k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>eth0:  setting full-duplex.
>802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
>All bugs added by David S. Miller <davem@redhat.com>
>eth0.24: add 33:33:00:00:00:01 mcast address to master interface
>eth0.24: add 01:00:5e:00:00:01 mcast address to master interface
>eth0.24: add 33:33:ff:50:9d:dd mcast address to master interface
>eth0: no IPv6 routers present
>eth0.28: add 33:33:00:00:00:01 mcast address to master interface
>eth0.28: add 01:00:5e:00:00:01 mcast address to master interface
>eth0.28: add 33:33:ff:50:9d:dd mcast address to master interface
>eth1: no IPv6 routers present
>eth0.24: no IPv6 routers present
>eth0.28: no IPv6 routers present
>eth1: found link beat
>eth1: autonegotiation complete: 100baseT-FD selected
>eth1: lost link beat
>eth1: found link beat
>eth1: autonegotiation complete: 100baseT-FD selected
>audit(1204254159.730:4): avc:  denied  { search } for  pid=2456 comm="zebra" name="net" dev=proc ino=-268435432 scontext=system_u:system_r:zebra_t:s0 tcontext=system_u:object_r:proc_net_t:s0 tclass=dir
>audit(1204254267.562:5): avc:  denied  { search } for  pid=2457 comm="zebra" name="net" dev=proc ino=-268435432 scontext=system_u:system_r:zebra_t:s0 tcontext=system_u:object_r:proc_net_t:s0 tclass=dir
>audit(1204254279.566:6): avc:  denied  { search } for  pid=2457 comm="zebra" name="net" dev=proc ino=-268435432 scontext=system_u:system_r:zebra_t:s0 tcontext=system_u:object_r:proc_net_t:s0 tclass=dir
>audit(1204254333.051:7): avc:  denied  { search } for  pid=2457 comm="zebra" name="net" dev=proc ino=-268435432 scontext=system_u:system_r:zebra_t:s0 tcontext=system_u:object_r:proc_net_t:s0 tclass=dir
>audit(1204254391.787:8): avc:  denied  { search } for  pid=2457 comm="zebra" name="net" dev=proc ino=-268435432 scontext=system_u:system_r:zebra_t:s0 tcontext=system_u:object_r:proc_net_t:s0 tclass=dir
>audit(1204254577.633:9): avc:  denied  { search } for  pid=2457 comm="zebra" name="net" dev=proc ino=-268435432 scontext=system_u:system_r:zebra_t:s0 tcontext=system_u:object_r:proc_net_t:s0 tclass=dir
>eth0.24: add 33:33:ff:00:00:02 mcast address to master interface
>audit(1204254751.039:10): avc:  denied  { search } for  pid=2457 comm="zebra" name="net" dev=proc ino=-268435432 scontext=system_u:system_r:zebra_t:s0 tcontext=system_u:object_r:proc_net_t:s0 tclass=dir
>audit(1204255215.307:11): avc:  denied  { search } for  pid=2457 comm="zebra" name="net" dev=proc ino=-268435432 scontext=system_u:system_r:zebra_t:s0 tcontext=system_u:object_r:proc_net_t:s0 tclass=dir
>audit(1204255505.188:12): avc:  denied  { search } for  pid=2457 comm="zebra" name="net" dev=proc ino=-268435432 scontext=system_u:system_r:zebra_t:s0 tcontext=system_u:object_r:proc_net_t:s0 tclass=dir
>audit(1204255958.769:13): avc:  denied  { search } for  pid=2457 comm="zebra" name="net" dev=proc ino=-268435432 scontext=system_u:system_r:zebra_t:s0 tcontext=system_u:object_r:proc_net_t:s0 tclass=dir
>audit(1204256032.932:14): avc:  denied  { search } for  pid=2457 comm="zebra" name="net" dev=proc ino=-268435432 scontext=system_u:system_r:zebra_t:s0 tcontext=system_u:object_r:proc_net_t:s0 tclass=dir
>audit(1204256368.000:15): avc:  denied  { search } for  pid=2457 comm="zebra" name="net" dev=proc ino=-268435432 scontext=system_u:system_r:zebra_t:s0 tcontext=system_u:object_r:proc_net_t:s0 tclass=dir
>audit(1204256369.176:16): avc:  denied  { search } for  pid=2457 comm="zebra" name="net" dev=proc ino=-268435432 scontext=system_u:system_r:zebra_t:s0 tcontext=system_u:object_r:proc_net_t:s0 tclass=dir
>audit(1204256410.303:17): avc:  denied  { search } for  pid=2457 comm="zebra" name="net" dev=proc ino=-268435432 scontext=system_u:system_r:zebra_t:s0 tcontext=system_u:object_r:proc_net_t:s0 tclass=dir
>audit(1204256416.210:18): avc:  denied  { search } for  pid=2457 comm="zebra" name="net" dev=proc ino=-268435432 scontext=system_u:system_r:zebra_t:s0 tcontext=system_u:object_r:proc_net_t:s0 tclass=dir
>eth0.24: add 33:33:00:00:00:02 mcast address to master interface
>eth0.24: add 33:33:ff:00:00:00 mcast address to master interface
>eth0.28: add 33:33:00:00:00:02 mcast address to master interface
>eth0.28: add 33:33:ff:00:00:00 mcast address to master interface
>process `cat' is using deprecated sysctl (syscall) net.ipv6.neigh.eth1.base_reachable_time; Use net.ipv6.neigh.eth1.base_reachable_time_ms instead.
>audit(1204258326.814:19): avc:  denied  { search } for  pid=2457 comm="zebra" name="net" dev=proc ino=-268435432 scontext=system_u:system_r:zebra_t:s0 tcontext=system_u:object_r:proc_net_t:s0 tclass=dir
>audit(1204262887.661:20): avc:  denied  { search } for  pid=2457 comm="zebra" name="net" dev=proc ino=-268435432 scontext=system_u:system_r:zebra_t:s0 tcontext=system_u:object_r:proc_net_t:s0 tclass=dir
>audit(1204262888.926:21): avc:  denied  { search } for  pid=2457 comm="zebra" name="net" dev=proc ino=-268435432 scontext=system_u:system_r:zebra_t:s0 tcontext=system_u:object_r:proc_net_t:s0 tclass=dir
>eth1: lost link beat
>eth1: found link beat
>eth1: autonegotiation complete: 100baseT-FD selected
>eth1: lost link beat
>eth1: found link beat
>eth1: autonegotiation complete: 10baseT-FD selected
>audit(1204310358.426:22): avc:  denied  { search } for  pid=2457 comm="zebra" name="net" dev=proc ino=-268435432 scontext=system_u:system_r:zebra_t:s0 tcontext=system_u:object_r:proc_net_t:s0 tclass=dir
>eth1: lost link beat
>eth1: found link beat
>eth1: autonegotiation complete: 100baseT-FD selected
>eth1: lost link beat
>eth1: found link beat
>eth1: autonegotiation complete: 100baseT-FD selected
>eth1: lost link beat
>eth1: found link beat
>eth1: autonegotiation complete: 100baseT-FD selected
>eth1: lost link beat
>eth1: found link beat
>eth1: autonegotiation complete: 100baseT-FD selected
>eth1: lost link beat
>eth1: found link beat
>eth1: autonegotiation complete: 100baseT-FD selected
>eth1: lost link beat
>eth1: found link beat
>eth1: autonegotiation complete: 100baseT-FD selected
>eth1: lost link beat
>eth1: found link beat
>eth1: autonegotiation complete: 100baseT-FD selected
>eth1: lost link beat
>eth1: found link beat
>eth1: autonegotiation complete: 100baseT-FD selected
>eth1: lost link beat
>eth1: found link beat
>eth1: autonegotiation complete: 100baseT-FD selected
>eth1: lost link beat
>ACPI: EC: acpi_ec_wait timeout, status = 32, expect_event = 1
>ACPI: EC: read timeout, command = 128
>ACPI Exception (evregion-0420): AE_TIME, Returned by Handler for [EmbeddedControl] [20070126]
>ACPI Exception (dswexec-0462): AE_TIME, While resolving operands for [OpcodeName unavailable] [20070126]
>ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.ISA0.EC0_._Q20] (Node c139b1e0), AE_TIME
>audit(1204918069.361:23): avc:  denied  { search } for  pid=2457 comm="zebra" name="net" dev=proc ino=-268435432 scontext=system_u:system_r:zebra_t:s0 tcontext=system_u:object_r:proc_net_t:s0 tclass=dir
>eth1: found link beat
>eth1: autonegotiation complete: 10baseT-FD selected
>eth1: lost link beat
>eth1: found link beat
>eth1: autonegotiation complete: 100baseT-FD selected
>eth1: lost link beat
>eth1: found link beat
>eth1: autonegotiation complete: 100baseT-FD selected
>eth1: lost link beat
>eth1: found link beat
>eth1: autonegotiation complete: 100baseT-FD selected
>audit(1204931965.087:24): avc:  denied  { search } for  pid=2457 comm="zebra" name="net" dev=proc ino=-268435432 scontext=system_u:system_r:zebra_t:s0 tcontext=system_u:object_r:proc_net_t:s0 tclass=dir
>eth1: lost link beat
>pccard: PCMCIA card inserted into slot 0
>cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa00fffff
>pcmcia: registering new device pcmcia0.0
>Probing IDE interface ide2...
>hde: SanDisk SDP3B-128, CFA DISK drive
>ide2 at 0x100-0x107,0x10e on irq 4
>hde: max request size: 128KiB
>hde: 250880 sectors (128 MB) w/1KiB Cache, CHS=980/8/32
> hde: hde1 hde2
> hde: p1 exceeds device capacity
> hde: p2 exceeds device capacity
>ide-cs: hde: Vpp = 0.0
>attempt to access beyond end of device
>hde: rw=0, want=313144, limit=250880
>Buffer I/O error on device hde2, logical block 39088
>attempt to access beyond end of device
>hde: rw=0, want=313144, limit=250880
>Buffer I/O error on device hde2, logical block 39088
>attempt to access beyond end of device
>hde: rw=0, want=313280, limit=250880
>Buffer I/O error on device hde2, logical block 39105
>attempt to access beyond end of device
>hde: rw=0, want=313280, limit=250880
>Buffer I/O error on device hde2, logical block 39105
>attempt to access beyond end of device
>hde: rw=0, want=313280, limit=250880
>Buffer I/O error on device hde2, logical block 39105
>attempt to access beyond end of device
>hde: rw=0, want=313280, limit=250880
>Buffer I/O error on device hde2, logical block 39105
>attempt to access beyond end of device
>hde: rw=0, want=313280, limit=250880
>Buffer I/O error on device hde2, logical block 39105
>attempt to access beyond end of device
>hde: rw=0, want=313280, limit=250880
>Buffer I/O error on device hde2, logical block 39105
>attempt to access beyond end of device
>hde: rw=0, want=313224, limit=250880
>Buffer I/O error on device hde2, logical block 39098
>attempt to access beyond end of device
>hde: rw=0, want=313272, limit=250880
>Buffer I/O error on device hde2, logical block 39104
>attempt to access beyond end of device
>hde: rw=0, want=313280, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313280, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=333640, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=333640, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=333760, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=333760, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=333760, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=333760, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=333760, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=333760, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=333704, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=333752, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=333760, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=333760, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>pccard: card ejected from slot 0
>BUG: sleeping function called from invalid context at kernel/rwsem.c:20
>in_atomic():0, irqs_disabled():1
> [<c043861e>] down_read+0x12/0x28
> [<c04f42c6>] pci_get_subsys+0x71/0xf3
> [<c04f435e>] pci_get_device+0x16/0x19
> [<c056519c>] init_hwif_default+0x25/0xdd
> [<c0565691>] ide_unregister+0x240/0x57c
> [<d8a3e018>] ide_release+0x18/0x28 [ide_cs]
> [<d8a3e030>] ide_detach+0x8/0x14 [ide_cs]
> [<c057f766>] pcmcia_device_remove+0x50/0xb5
> [<c0552b6f>] __device_release_driver+0x6e/0x8b
> [<c0552f42>] device_release_driver+0x32/0x48
> [<c0552527>] bus_remove_device+0x6a/0x7a
> [<c0550c85>] device_del+0x1f5/0x266
> [<c0550cfe>] device_unregister+0x8/0x10
> [<c057f3b4>] pcmcia_card_remove+0x58/0x77
> [<c057fd44>] ds_event+0x56/0x87
> [<c042668e>] printk+0x1f/0x92
> [<c057bb50>] send_event+0x3b/0x53
> [<c057bd2f>] socket_shutdown+0xc/0xbd
> [<c057bdfc>] socket_remove+0x1c/0x26
> [<c057be45>] pcmcia_eject_card+0x3f/0x4c
> [<c057e74b>] pccard_store_eject+0x1b/0x23
> [<c057e730>] pccard_store_eject+0x0/0x23
> [<c0550415>] dev_attr_store+0x24/0x29
> [<c04aed58>] sysfs_write_file+0xb2/0xdc
> [<c04aeca6>] sysfs_write_file+0x0/0xdc
> [<c0477c82>] vfs_write+0xa8/0x15a
> [<c047829f>] sys_write+0x41/0x67
> [<c0404fa2>] syscall_call+0x7/0xb
> =======================
>pccard: card ejected from slot 1
>pccard: PCMCIA card inserted into slot 1
>pcmcia: registering new device pcmcia1.0
>eth1: NE2000 (DL10022 rev 05): io 0x300, irq 3, hw_addr 00:04:5A:95:F4:F9
>pccard: card ejected from slot 1
>audit(1205277433.977:25): avc:  denied  { search } for  pid=12710 comm="zebra" name="net" dev=proc ino=-268435432 scontext=system_u:system_r:zebra_t:s0 tcontext=system_u:object_r:proc_net_t:s0 tclass=dir
>pccard: PCMCIA card inserted into slot 0
>pcmcia: registering new device pcmcia0.0
>Probing IDE interface ide2...
>hde: SanDisk SDP3B-128, CFA DISK drive
>ide2 at 0x100-0x107,0x10e on irq 3
>hde: max request size: 128KiB
>hde: 250880 sectors (128 MB) w/1KiB Cache, CHS=980/8/32
> hde: hde1 hde2
> hde: p1 exceeds device capacity
> hde: p2 exceeds device capacity
>ide-cs: hde: Vpp = 0.0
>attempt to access beyond end of device
>hde: rw=0, want=333640, limit=250880
>printk: 42 messages suppressed.
>Buffer I/O error on device hde1, logical block 2544
>attempt to access beyond end of device
>hde: rw=0, want=333640, limit=250880
>Buffer I/O error on device hde1, logical block 2544
>attempt to access beyond end of device
>hde: rw=0, want=333760, limit=250880
>Buffer I/O error on device hde1, logical block 2559
>attempt to access beyond end of device
>hde: rw=0, want=333760, limit=250880
>Buffer I/O error on device hde1, logical block 2559
>attempt to access beyond end of device
>hde: rw=0, want=333760, limit=250880
>Buffer I/O error on device hde1, logical block 2559
>attempt to access beyond end of device
>hde: rw=0, want=333760, limit=250880
>Buffer I/O error on device hde1, logical block 2559
>attempt to access beyond end of device
>hde: rw=0, want=333760, limit=250880
>Buffer I/O error on device hde1, logical block 2559
>attempt to access beyond end of device
>hde: rw=0, want=333760, limit=250880
>Buffer I/O error on device hde1, logical block 2559
>attempt to access beyond end of device
>hde: rw=0, want=333704, limit=250880
>Buffer I/O error on device hde1, logical block 2552
>attempt to access beyond end of device
>hde: rw=0, want=333752, limit=250880
>Buffer I/O error on device hde1, logical block 2558
>attempt to access beyond end of device
>hde: rw=0, want=333760, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=333760, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313288, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313144, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313144, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313280, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313280, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313280, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313280, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313280, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313280, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313224, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313272, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313280, limit=250880
>attempt to access beyond end of device
>hde: rw=0, want=313280, limit=250880
>ide_do_rw_disk - bad command: dev hde: type=2, flags=104c9
>
>sector 74620663, nr/cnr 16/8
>bio 00000000, biotail 00000000, buffer 00000000, data 00000000, len 0
>cdb: 1b 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 
>pccard: card ejected from slot 0
>BUG: sleeping function called from invalid context at kernel/rwsem.c:20
>in_atomic():0, irqs_disabled():1
> [<c043861e>] down_read+0x12/0x28
> [<c04f42c6>] pci_get_subsys+0x71/0xf3
> [<c04f435e>] pci_get_device+0x16/0x19
> [<c056519c>] init_hwif_default+0x25/0xdd
> [<c0565691>] ide_unregister+0x240/0x57c
> [<d8a3e018>] ide_release+0x18/0x28 [ide_cs]
> [<d8a3e030>] ide_detach+0x8/0x14 [ide_cs]
> [<c057f766>] pcmcia_device_remove+0x50/0xb5
> [<c0552b6f>] __device_release_driver+0x6e/0x8b
> [<c0552f42>] device_release_driver+0x32/0x48
> [<c0552527>] bus_remove_device+0x6a/0x7a
> [<c0550c85>] device_del+0x1f5/0x266
> [<c0550cfe>] device_unregister+0x8/0x10
> [<c057f3b4>] pcmcia_card_remove+0x58/0x77
> [<c057fd44>] ds_event+0x56/0x87
> [<c042668e>] printk+0x1f/0x92
> [<c057bb50>] send_event+0x3b/0x53
> [<c057bd2f>] socket_shutdown+0xc/0xbd
> [<c057bdfc>] socket_remove+0x1c/0x26
> [<c057be45>] pcmcia_eject_card+0x3f/0x4c
> [<c057e74b>] pccard_store_eject+0x1b/0x23
> [<c057e730>] pccard_store_eject+0x0/0x23
> [<c0550415>] dev_attr_store+0x24/0x29
> [<c04aed58>] sysfs_write_file+0xb2/0xdc
> [<c04aeca6>] sysfs_write_file+0x0/0xdc
> [<c0477c82>] vfs_write+0xa8/0x15a
> [<c047829f>] sys_write+0x41/0x67
> [<c0404fa2>] syscall_call+0x7/0xb
> [<c0620000>] unix_stream_connect+0x2f6/0x36c
> =======================
>pccard: PCMCIA card inserted into slot 0
>pcmcia: registering new device pcmcia0.0
>Probing IDE interface ide2...
>hde: SanDisk SDP3B-128, CFA DISK drive
>ide2 at 0x100-0x107,0x10e on irq 3
>hde: max request size: 128KiB
>hde: 250880 sectors (128 MB) w/1KiB Cache, CHS=980/8/32
> hde: hde1 hde2
>ide-cs: hde: Vpp = 0.0
>
>
>sh-3.1# dd if=/dev/hde of=/tmp bs=64k
>1960+0 records in
>1960+0 records out
>128450560 bytes (128 MB) copied, 87.6716 seconds, 1.5 MB/s
>
>sh-3.1# sha1sum /tmp/out
>6f9f93d1b73a9d4bf74b10b697e6c310f102a1fe  /tmp/out
>
>sh-3.1# sha1sum install-media-8.4R3.3-domestic 
>2716e259073f5f57fc09bd2b805ca86d45f0e035  install-media-8.4R3.3-domestic
>
>sh-3.1# dd if=install-media-8.4R3.3-domestic of=/dev/hde bs=64k
>1918+1 records in
>1918+1 records out
>125751296 bytes (126 MB) copied, 127.722 seconds, 985 kB/s
>
>sh-3.1# ls -l install-media-8.4R3.3-domestic 
>-rw-r----- 1 root root 125751296 Mar 11 19:20 install-media-8.4R3.3-domestic
>
>sh-3.1# sha1sum /dev/hde
>6f9f93d1b73a9d4bf74b10b697e6c310f102a1fe  /dev/hde
>
>sh-3.1# dd if=/dev/hde bs=512 cont=245608 | sha1sum
>2716e259073f5f57fc09bd2b805ca86d45f0e035  -
>245608+0 records in
>245608+0 records out
>125751296 bytes (126 MB) copied, 88.2048 seconds, 1.4 MB/s
>
>sh-3.1# dmesg|tail -50
> [<c047829f>] sys_write+0x41/0x67
> [<c0404fa2>] syscall_call+0x7/0xb
> [<c0620000>] unix_stream_connect+0x2f6/0x36c
> =======================
>pccard: PCMCIA card inserted into slot 0
>pcmcia: registering new device pcmcia0.0
>Probing IDE interface ide2...
>hde: SanDisk SDP3B-128, CFA DISK drive
>ide2 at 0x100-0x107,0x10e on irq 3
>hde: max request size: 128KiB
>hde: 250880 sectors (128 MB) w/1KiB Cache, CHS=980/8/32
> hde: hde1 hde2
>ide-cs: hde: Vpp = 0.0
>ide_do_rw_disk - bad command: dev hde: type=2, flags=104c9
>
>sector 74949039, nr/cnr 8/8
>bio 00000000, biotail 00000000, buffer 00000000, data 00000000, len 0
>cdb: 1b 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 
>pccard: card ejected from slot 0
>BUG: sleeping function called from invalid context at kernel/rwsem.c:20
>in_atomic():0, irqs_disabled():1
> [<c043861e>] down_read+0x12/0x28
> [<c04f42c6>] pci_get_subsys+0x71/0xf3
> [<c04f435e>] pci_get_device+0x16/0x19
> [<c056519c>] init_hwif_default+0x25/0xdd
> [<c0565691>] ide_unregister+0x240/0x57c
> [<d8a3e018>] ide_release+0x18/0x28 [ide_cs]
> [<d8a3e030>] ide_detach+0x8/0x14 [ide_cs]
> [<c057f766>] pcmcia_device_remove+0x50/0xb5
> [<c0552b6f>] __device_release_driver+0x6e/0x8b
> [<c0552f42>] device_release_driver+0x32/0x48
> [<c0552527>] bus_remove_device+0x6a/0x7a
> [<c0550c85>] device_del+0x1f5/0x266
> [<c0550cfe>] device_unregister+0x8/0x10
> [<c057f3b4>] pcmcia_card_remove+0x58/0x77
> [<c057fd44>] ds_event+0x56/0x87
> [<c042668e>] printk+0x1f/0x92
> [<c057bb50>] send_event+0x3b/0x53
> [<c057bd2f>] socket_shutdown+0xc/0xbd
> [<c057bdfc>] socket_remove+0x1c/0x26
> [<c057be45>] pcmcia_eject_card+0x3f/0x4c
> [<c057e74b>] pccard_store_eject+0x1b/0x23
> [<c057e730>] pccard_store_eject+0x0/0x23
> [<c0550415>] dev_attr_store+0x24/0x29
> [<c04aed58>] sysfs_write_file+0xb2/0xdc
> [<c04aeca6>] sysfs_write_file+0x0/0xdc
> [<c0477c82>] vfs_write+0xa8/0x15a
> [<c047829f>] sys_write+0x41/0x67
> [<c0404fa2>] syscall_call+0x7/0xb
> =======================
>sh-3.1# sync
>sh-3.1# exit
>
>Script done on Tue 11 Mar 2008 08:20:20 PM EDT

Actions: View

Attachments on bug 437056: 297682 | 297688 | 298456 | 298457