Attachment 297805 Details for Bug 437083 – dmesg with an unplug spew if that helps

dmesg with an unplug spew if that helps

wireless.p54 (text/plain), 41.60 KB, created by Caolan McNamara on 2008-03-12 17:03:18 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Caolan McNamara

Created: 2008-03-12 17:03:18 UTC

Size: 41.60 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.25-0.113.rc5.git2.fc9 (mockbuild@) (gcc version 4.3.0 20080307 (Red Hat 4.3.0-2) (GCC) ) #1 SMP Tue Mar 11 22:33:43 EDT 2008
>Command line: ro root=/dev/VolGroup01/LogVol00 rhgb quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e5000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000affc0000 (usable)
> BIOS-e820: 00000000affc0000 - 00000000affce000 (ACPI data)
> BIOS-e820: 00000000affce000 - 00000000afff0000 (ACPI NVS)
> BIOS-e820: 00000000afff0000 - 00000000b0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000150000000 (usable)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 720832) 1 entries of 3200 used
>Entering add_active_range(0, 1048576, 1376256) 2 entries of 3200 used
>end_pfn_map = 1376256
>DMI 2.3 present.
>ACPI: RSDP 000FB870, 0024 (r2 ACPIAM)
>ACPI: XSDT AFFC0100, 0044 (r1 A M I  OEMXSDT   3000615 MSFT       97)
>ACPI: FACP AFFC0290, 00F4 (r3 A M I  OEMFACP   3000615 MSFT       97)
>ACPI: DSDT AFFC0440, 5683 (r1  A0367 A0367001        1 INTL  2002026)
>ACPI: FACS AFFCE000, 0040
>ACPI: APIC AFFC0390, 0070 (r1 A M I  OEMAPIC   3000615 MSFT       97)
>ACPI: MCFG AFFC0400, 003C (r1 A M I  OEMMCFG   3000615 MSFT       97)
>ACPI: OEMB AFFCE040, 005B (r1 A M I  AMI_OEM   3000615 MSFT       97)
>Scanning NUMA topology in Northbridge 24
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000150000000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 720832) 1 entries of 3200 used
>Entering add_active_range(0, 1048576, 1376256) 2 entries of 3200 used
>Bootmem setup node 0 0000000000000000-0000000150000000
>  NODE_DATA [000000000000f000 - 0000000000016fff]
>  bootmap [0000000000017000 -  0000000000040fff] pages 2a
>early res: 0 [0-fff] BIOS data page
>early res: 1 [6000-7fff] SMP_TRAMPOLINE
>early res: 2 [200000-bf5b57] TEXT DATA BSS
>early res: 3 [37c86000-37fefe74] RAMDISK
>early res: 4 [9fc00-a0bff] EBDA
>early res: 5 [8000-efff] PGTABLE
> [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
> [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001400000 on node 0
> [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001800000 on node 0
> [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001c00000 on node 0
> [ffffe20000800000-ffffe200009fffff] PMD ->ffff810001e00000 on node 0
> [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002200000 on node 0
> [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002600000 on node 0
> [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002800000 on node 0
> [ffffe20001000000-ffffe200011fffff] PMD ->ffff810002c00000 on node 0
> [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003000000 on node 0
> [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003200000 on node 0
> [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003600000 on node 0
> [ffffe20001800000-ffffe200019fffff] PMD ->ffff810003a00000 on node 0
> [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810003c00000 on node 0
> [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004000000 on node 0
> [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004400000 on node 0
> [ffffe20002000000-ffffe200021fffff] PMD ->ffff810004600000 on node 0
> [ffffe20002200000-ffffe200023fffff] PMD ->ffff810004a00000 on node 0
> [ffffe20002400000-ffffe200025fffff] PMD ->ffff810004e00000 on node 0
> [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005000000 on node 0
> [ffffe20002800000-ffffe200029fffff] PMD ->ffff810005400000 on node 0
> [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810005800000 on node 0
> [ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810005a00000 on node 0
> [ffffe20002e00000-ffffe20002ffffff] PMD ->ffff810005e00000 on node 0
> [ffffe20003000000-ffffe200031fffff] PMD ->ffff810006200000 on node 0
> [ffffe20003200000-ffffe200033fffff] PMD ->ffff810006400000 on node 0
> [ffffe20003400000-ffffe200035fffff] PMD ->ffff810006800000 on node 0
> [ffffe20003600000-ffffe200037fffff] PMD ->ffff810006c00000 on node 0
> [ffffe20003800000-ffffe200039fffff] PMD ->ffff810006e00000 on node 0
> [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810007200000 on node 0
> [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810007600000 on node 0
> [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810007800000 on node 0
> [ffffe20004000000-ffffe200041fffff] PMD ->ffff810007c00000 on node 0
> [ffffe20006000000-ffffe200061fffff] PMD ->ffff810008000000 on node 0
> [ffffe20006200000-ffffe200063fffff] PMD ->ffff810008200000 on node 0
> [ffffe20006400000-ffffe200065fffff] PMD ->ffff810008600000 on node 0
> [ffffe20006600000-ffffe200067fffff] PMD ->ffff810008a00000 on node 0
> [ffffe20006800000-ffffe200069fffff] PMD ->ffff810008c00000 on node 0
> [ffffe20006a00000-ffffe20006bfffff] PMD ->ffff810009000000 on node 0
> [ffffe20006c00000-ffffe20006dfffff] PMD ->ffff810009400000 on node 0
> [ffffe20006e00000-ffffe20006ffffff] PMD ->ffff810009600000 on node 0
> [ffffe20007000000-ffffe200071fffff] PMD ->ffff810009a00000 on node 0
> [ffffe20007200000-ffffe200073fffff] PMD ->ffff810009e00000 on node 0
> [ffffe20007400000-ffffe200075fffff] PMD ->ffff81000a000000 on node 0
> [ffffe20007600000-ffffe200077fffff] PMD ->ffff81000a400000 on node 0
> [ffffe20007800000-ffffe200079fffff] PMD ->ffff81000a800000 on node 0
> [ffffe20007a00000-ffffe20007bfffff] PMD ->ffff81000aa00000 on node 0
> [ffffe20007c00000-ffffe20007dfffff] PMD ->ffff81000ae00000 on node 0
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1376256
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   720832
>    0:  1048576 ->  1376256
>On node 0 totalpages: 1048415
>  DMA zone: 96 pages used for memmap
>  DMA zone: 2562 pages reserved
>  DMA zone: 1341 pages, LIFO batch:0
>  DMA32 zone: 24480 pages used for memmap
>  DMA32 zone: 692256 pages, LIFO batch:31
>  Normal zone: 7680 pages used for memmap
>  Normal zone: 320000 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>Detected use of extended apic ids on hypertransport bus
>ACPI: PM-Timer IO Port: 0x508
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: BIOS IRQ0 pin2 override ignored.
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e5000
>PM: Registered nosave memory: 00000000000e5000 - 0000000000100000
>PM: Registered nosave memory: 00000000affc0000 - 00000000affce000
>PM: Registered nosave memory: 00000000affce000 - 00000000afff0000
>PM: Registered nosave memory: 00000000afff0000 - 00000000b0000000
>PM: Registered nosave memory: 00000000b0000000 - 00000000fec00000
>PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
>PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
>PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
>PM: Registered nosave memory: 00000000fef00000 - 00000000ff780000
>PM: Registered nosave memory: 00000000ff780000 - 0000000100000000
>Allocating PCI resources starting at b8000000 (gap: b0000000:4ec00000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 436896 bytes of per cpu data
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1013597
>Policy zone: Normal
>Kernel command line: ro root=/dev/VolGroup01/LogVol00 rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Extended CMOS year: 2000
>TSC calibrated against PM_TIMER
>Marking TSC unstable due to TSCs unsynchronized
>time.c: Detected 2210.066 MHz processor.
>spurious 8259A interrupt: IRQ7.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          48
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1712 kB
> per task-struct memory footprint: 3456 bytes
>Checking aperture...
>Node 0: aperture @ c000000 size 32 MB
>Aperture pointing to e820 RAM. Ignoring.
>No AGP bridge found
>Your BIOS doesn't leave a aperture memory hole
>Please enable the IOMMU option in the BIOS setup
>This costs you 64 MB of RAM
>Mapping aperture over 65536 KB of RAM @ c000000
>Memory: 4014496k/5505024k available (2719k kernel code, 179164k reserved, 1459k data, 740k init)
>CPA: page pool initialized 64 of 64 pages preallocated
>SLUB: Genslabs=13, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>Calibrating delay using timer specific routine.. 4423.74 BogoMIPS (lpj=2211873)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>checking if image is initramfs... it is
>debug: unmapping init memory ffff810037c86000..ffff810037ff0000
>ACPI: Core revision 20070126
>ACPI: Checking initramfs for custom DSDT
>Using local APIC timer interrupts.
>APIC timer calibration result 12557189
>Detected 12.557 MHz APIC timer.
>lockdep: fixing up alternatives.
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4420.15 BogoMIPS (lpj=2210076)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>AMD Athlon(tm)64 X2 Dual Core Processor  4200+ stepping 02
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=96 bytes
>sizeof(inode)=1088 bytes
>sizeof(dentry)=256 bytes
>sizeof(ext3inode)=1488 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=224 bytes
>sizeof(task_struct)=9968 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000000,00000003
>  groups: 00000000,00000001 00000000,00000002
>  domain 1: span 00000000,00000003
>   groups: 00000000,00000003
>CPU1 attaching sched-domain:
> domain 0: span 00000000,00000003
>  groups: 00000000,00000002 00000000,00000001
>  domain 1: span 00000000,00000003
>   groups: 00000000,00000003
>khelper used greatest stack depth: 5784 bytes left
>net_namespace: 1152 bytes
>Time: 16:40:59  Date: 03/12/08
>NET: Registered protocol family 16
>khelper used greatest stack depth: 5448 bytes left
>No dock devices found.
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Transparent bridge - 0000:00:10.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *11
>ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *10
>ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11
>ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
>ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  4F, should be 42 [20070126]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>DMAR:parse DMAR table failure.
>PCI-DMA: Disabling AGP.
>PCI-DMA: aperture base @ c000000 size 65536 KB
>PCI-DMA: using GART IOMMU.
>PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
>ACPI: RTC can wake from S4
>system 00:07: ioport range 0x4d0-0x4d1 has been reserved
>system 00:07: ioport range 0x800-0x80f has been reserved
>system 00:07: ioport range 0x500-0x57f has been reserved
>system 00:07: ioport range 0x580-0x5ff has been reserved
>system 00:07: ioport range 0x800-0x87f could not be reserved
>system 00:07: ioport range 0x880-0x8ff has been reserved
>system 00:07: ioport range 0x900-0x97f has been reserved
>system 00:07: ioport range 0x980-0x9ff has been reserved
>system 00:07: ioport range 0x2000-0x207f has been reserved
>system 00:07: ioport range 0x2080-0x20ff has been reserved
>system 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved
>system 00:07: iomem range 0xfeb80000-0xfebbffff has been reserved
>system 00:07: iomem range 0xfee01000-0xfeefffff has been reserved
>system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
>system 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved
>system 00:0a: ioport range 0x290-0x297 has been reserved
>system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:0c: iomem range 0x0-0x9ffff could not be reserved
>system 00:0c: iomem range 0xc0000-0xcffff has been reserved
>system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
>system 00:0c: iomem range 0x100000-0xafffffff could not be reserved
>system 00:0c: iomem range 0xff780000-0xffffffff could not be reserved
>PCI: Bridge: 0000:00:02.0
>  IO window: disabled.
>  MEM window: disabled.
>Time: acpi_pm clocksource has been installed.
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:03.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:04.0
>  IO window: disabled.
>  MEM window: 0xfaa00000-0xfeafffff
>  PREFETCH window: 0x00000000bff00000-0x00000000dfefffff
>PCI: Bridge: 0000:00:10.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>PCI: Setting latency timer of device 0000:00:10.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 10, 4194304 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>audit: initializing netlink socket (disabled)
>type=2000 audit(1205340058.771:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:00.0: Enabling HT MSI Mapping
>pci 0000:00:02.0: Enabling HT MSI Mapping
>pci 0000:00:03.0: Enabling HT MSI Mapping
>pci 0000:00:04.0: Enabling HT MSI Mapping
>pci 0000:00:09.0: Enabling HT MSI Mapping
>pci 0000:00:0e.0: Enabling HT MSI Mapping
>pci 0000:00:10.0: Enabling HT MSI Mapping
>pci 0000:00:10.1: Enabling HT MSI Mapping
>pci 0000:03:00.0: Boot video device
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.0:pcie00]
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:04.0:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: ACPI0007:01 is registered as cooling_device1
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>registered taskstats version 1
>  Magic number: 0:711:691
>debug: unmapping init memory ffffffff814ca000..ffffffff81583000
>Write protecting the kernel read-only data: 1144k
>ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUB2] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:0b.1 to 64
>ehci_hcd 0000:00:0b.1: EHCI Host Controller
>ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:0b.1: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:0b.1
>ehci_hcd 0000:00:0b.1: irq 23, io mem 0xfebdfc00
>ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25-0.113.rc5.git2.fc9 ehci_hcd
>usb usb1: SerialNumber: 0000:00:0b.1
>modprobe used greatest stack depth: 4360 bytes left
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUB0] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>ohci_hcd 0000:00:0b.0: OHCI Host Controller
>ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:0b.0: irq 22, io mem 0xfebde000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 8 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25-0.113.rc5.git2.fc9 ohci_hcd
>usb usb2: SerialNumber: 0000:00:0b.0
>USB Universal Host Controller Interface driver v3.0
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LSA0] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>ACPI: PCI interrupt for device 0000:00:0e.0 disabled
>usb 1-7: new high speed USB device using ehci_hcd and address 4
>usb 1-7: configuration #1 chosen from 1 choice
>usb 1-7: New USB device found, idVendor=0846, idProduct=4240
>usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-7: Product: NETGEAR WG111
>usb 1-7: Manufacturer: GlobespanVirata
>usb 1-7: SerialNumber: 3887-0000
>usb 2-2: new full speed USB device using ohci_hcd and address 2
>usb 2-2: configuration #1 chosen from 1 choice
>hub 2-2:1.0: USB hub found
>hub 2-2:1.0: 4 ports detected
>usb 2-2: New USB device found, idVendor=0557, idProduct=7000
>usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 2-3: new low speed USB device using ohci_hcd and address 3
>usb 2-3: configuration #1 chosen from 1 choice
>hiddev96hidraw0: USB HID v1.10 Device [CPS UPS 750VA] on usb-0000:00:0b.0-3
>usb 2-3: New USB device found, idVendor=0764, idProduct=0501
>usb 2-3: New USB device strings: Mfr=3, Product=1, SerialNumber=0
>usb 2-3: Product: UPS 750VA
>usb 2-3: Manufacturer: CPS
>usb 2-2.1: new low speed USB device using ohci_hcd and address 4
>usb 2-2.1: configuration #1 chosen from 1 choice
>input: Chicony USB Gaming Keyboard Pro as /devices/pci0000:00/0000:00:0b.0/usb2/2-2/2-2.1/2-2.1:1.0/input/input1
>input,hidraw1: USB HID v1.11 Keyboard [Chicony USB Gaming Keyboard Pro] on usb-0000:00:0b.0-2.1
>input: Chicony USB Gaming Keyboard Pro as /devices/pci0000:00/0000:00:0b.0/usb2/2-2/2-2.1/2-2.1:1.1/input/input2
>input,hiddev97,hidraw2: USB HID v1.11 Device [Chicony USB Gaming Keyboard Pro] on usb-0000:00:0b.0-2.1
>input: Chicony USB Gaming Keyboard Pro as /devices/pci0000:00/0000:00:0b.0/usb2/2-2/2-2.1/2-2.1:1.2/input/input3
>input,hidraw3: USB HID v1.11 Gamepad [Chicony USB Gaming Keyboard Pro] on usb-0000:00:0b.0-2.1
>usb 2-2.1: New USB device found, idVendor=06a3, idProduct=8000
>usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-2.1: Product: USB Gaming Keyboard Pro
>usb 2-2.1: Manufacturer: Chicony
>usb 2-2.4: new full speed USB device using ohci_hcd and address 5
>usb 2-2.4: configuration #1 chosen from 1 choice
>input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-2/2-2.4/2-2.4:1.0/input/input4
>input,hidraw4: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:0b.0-2.4
>hiddev98hidraw5: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:0b.0-2.4
>usb 2-2.4: New USB device found, idVendor=046d, idProduct=c041
>usb 2-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-2.4: Product: USB Gaming Mouse
>usb 2-2.4: Manufacturer: Logitech
>sata_nv 0000:00:0e.0: version 3.5
>ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LSA0] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>scsi0 : sata_nv
>scsi1 : sata_nv
>ata1: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe000 irq 21
>ata2: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xe008 irq 21
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: WDC WD1500AHFD-00RAR1, 20.07P20, max UDMA/133
>ata1.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/133
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2.00: ATA-6: Seagate FreeAgent Pro, 3.AFK, max UDMA/133
>ata2.00: 976773168 sectors, multi 0: LBA48 
>ata2.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD1500AHFD-0 20.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 293046768 512-byte hardware sectors (150040 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 293046768 512-byte hardware sectors (150040 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: Direct-Access     ATA      Seagate FreeAgen 3.AF PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 1:0:0:0: [sdb] Attached SCSI disk
>modprobe used greatest stack depth: 2952 bytes left
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>pata_amd 0000:00:0d.0: version 0.3.10
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>scsi2 : pata_amd
>scsi3 : pata_amd
>ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
>ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
>ata3.00: ATAPI: _NEC DVD_RW ND-3550A, 1.05, max UDMA/33
>ata3.01: ATA-6: IC35L060AVV207-0, V22OA66A, max UDMA/100
>ata3.01: 78125000 sectors, multi 16: LBA48 
>ata3: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc0c60000) ACPI=0x701f (60:20:0x15)
>ata3: nv_mode_filter: 0x3f39f&0x3f01f->0x3f01f, BIOS=0x3f000 (0xc0c60000) ACPI=0x3f01f (60:20:0x15)
>ata3.00: configured for UDMA/33
>ata3.01: configured for UDMA/100
>scsi 2:0:0:0: CD-ROM            _NEC     DVD_RW ND-3550A  1.05 PQ: 0 ANSI: 5
>scsi 2:0:1:0: Direct-Access     ATA      IC35L060AVV207-0 V22O PQ: 0 ANSI: 5
>sd 2:0:1:0: [sdc] 78125000 512-byte hardware sectors (40000 MB)
>sd 2:0:1:0: [sdc] Write Protect is off
>sd 2:0:1:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:1:0: [sdc] 78125000 512-byte hardware sectors (40000 MB)
>sd 2:0:1:0: [sdc] Write Protect is off
>sd 2:0:1:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1
>sd 2:0:1:0: [sdc] Attached SCSI disk
>modprobe used greatest stack depth: 2880 bytes left
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>type=1404 audit(1205340070.573:2): selinux=0 auid=4294967295 ses=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>scsi 2:0:0:0: Attached scsi generic sg2 type 5
>sd 2:0:1:0: Attached scsi generic sg3 type 0
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 2:0:0:0: Attached scsi CD-ROM sr0
>input: Power Button (FF) as /devices/virtual/input/input5
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/virtual/input/input6
>i2c-adapter i2c-0: nForce2 SMBus adapter at 0x600
>i2c-adapter i2c-1: nForce2 SMBus adapter at 0x700
>ACPI: Power Button (CM) [PWRB]
>forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
>ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:14.0 to 64
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>input: PC Speaker as /devices/platform/pcspkr/input/input7
>parport_pc 00:06: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
>forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x20 @ 1, addr 00:15:f2:01:39:ac
>forcedeth 0000:00:14.0: highdma pwrctl timirq lnktim desc-v3
>ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:10.1 to 64
>ALSA sound/pci/hda/hda_intel.c:1813: chipset global capabilities = 0x4401
>ALSA sound/pci/hda/hda_intel.c:749: codec_mask = 0x1
>ALSA sound/pci/hda/hda_codec.c:2239: hda_codec: model '3stack' is selected for config 10de:cb84 (ASUS A8N-VM)
>ALSA sound/pci/hda/hda_codec.c:1076: Cannot find slave Side Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1076: Cannot find slave Speaker Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1076: Cannot find slave IEC958 Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1076: Cannot find slave Side Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1076: Cannot find slave Speaker Playback Switch, skipped
>p54: LM86 firmware
>p54: FW rev 2.5.8.0 - Softmac protocol 3.0
>p54: unknown eeprom code : 0x1
>p54: unknown eeprom code : 0x3
>p54: unknown eeprom code : 0x1007
>p54: unknown eeprom code : 0x1008
>p54: unknown eeprom code : 0x1100
>p54: unknown eeprom code : 0x1905
>phy0: Selected rate control algorithm 'pid'
>phy0: hwaddr 00:0f:b5:02:94:dd, isl3887
>usbcore: registered new interface driver prism54usb
>udev: renamed network interface wlan0 to wlan2
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
>device-mapper: multipath: version 1.0.5 loaded
>loop: module loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2031608k swap on /dev/mapper/VolGroup01-LogVol01.  Priority:-1 extents:1 across:2031608k
>powernow-k8: Found 1 AMD Athlon(tm)64 X2 Dual Core Processor  4200+ processors (2 cpu cores) (version 2.20.00)
>powernow-k8:    0 : fid 0xe (2200 MHz), vid 0x8
>powernow-k8:    1 : fid 0xc (2000 MHz), vid 0xa
>powernow-k8:    2 : fid 0xa (1800 MHz), vid 0xc
>powernow-k8:    3 : fid 0x2 (1000 MHz), vid 0x12
>Clocksource tsc unstable (delta = -71829619 ns)
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>fuse init (API version 7.9)
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period
>ALSA sound/pci/hda/hda_intel.c:1293: azx_pcm_prepare: bufsize=0x1800, fragsize=0x800, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:686: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:686: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:686: hda_codec_setup_stream: NID=0x3, stream=0x0, channel=0, format=0x0
>ALSA sound/pci/hda/hda_codec.c:686: hda_codec_setup_stream: NID=0x2, stream=0x0, channel=0, format=0x0
>ADDRCONF(NETDEV_UP): wlan2: link is not ready
>mtrr: no MTRR for c0000000,10000000 found
>wlan2: Initial auth_alg=0
>wlan2: authenticate with AP 00:14:bf:93:3d:8e
>wlan2: RX authentication from 00:14:bf:93:3d:8e (alg=0 transaction=2 status=0)
>wlan2: authenticated
>wlan2: associate with AP 00:14:bf:93:3d:8e
>wlan2: RX AssocResp from 00:14:bf:93:3d:8e (capab=0x401 status=0 aid=3)
>wlan2: associated
>wlan2: switched to long barker preamble (BSSID=00:14:bf:93:3d:8e)
>wlan2: disassociate(reason=3)
>mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
>ALSA sound/pci/hda/hda_intel.c:1293: azx_pcm_prepare: bufsize=0x4400, fragsize=0x1100, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:686: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:686: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1293: azx_pcm_prepare: bufsize=0x4400, fragsize=0x1100, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:686: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:686: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1293: azx_pcm_prepare: bufsize=0x4400, fragsize=0x1100, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:686: hda_codec_setup_stream: NID=0x6, stream=0x1, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1293: azx_pcm_prepare: bufsize=0x4400, fragsize=0x1100, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:686: hda_codec_setup_stream: NID=0x6, stream=0x1, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:686: hda_codec_setup_stream: NID=0x6, stream=0x0, channel=0, format=0x0
>ALSA sound/pci/hda/hda_codec.c:686: hda_codec_setup_stream: NID=0x6, stream=0x0, channel=0, format=0x0
>ALSA sound/pci/hda/hda_codec.c:686: hda_codec_setup_stream: NID=0x3, stream=0x0, channel=0, format=0x0
>ALSA sound/pci/hda/hda_codec.c:686: hda_codec_setup_stream: NID=0x2, stream=0x0, channel=0, format=0x0
>ALSA sound/pci/hda/hda_codec.c:686: hda_codec_setup_stream: NID=0x3, stream=0x0, channel=0, format=0x0
>wlan2: Initial auth_alg=0
>wlan2: authenticate with AP 00:14:bf:93:3d:8e
>wlan2: Initial auth_alg=0
>wlan2: authenticate with AP 00:16:b6:b4:3a:ea
>wlan2: RX authentication from 00:16:b6:b4:3a:ea (alg=0 transaction=2 status=0)
>wlan2: authenticated
>wlan2: associate with AP 00:16:b6:b4:3a:ea
>wlan2: RX AssocResp from 00:16:b6:b4:3a:ea (capab=0x431 status=0 aid=3)
>wlan2: associated
>wlan2: switched to long barker preamble (BSSID=00:16:b6:b4:3a:ea)
>ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready
>wlan2: no IPv6 routers present
>wlan2: No ProbeResp from current AP 00:16:b6:b4:3a:ea - assume out of range
>usb 1-7: USB disconnect, address 4
>
>=======================================================
>[ INFO: possible circular locking dependency detected ]
>2.6.25-0.113.rc5.git2.fc9 #1
>-------------------------------------------------------
>khubd/167 is trying to acquire lock:
> ((name)){--..}, at: [<ffffffff81044da1>] flush_workqueue+0x0/0xa6
>
>but task is already holding lock:
> (rtnl_mutex){--..}, at: [<ffffffff8122625f>] rtnl_lock+0x12/0x14
>
>which lock already depends on the new lock.
>
>
>the existing dependency chain (in reverse order) is:
>
>-> #2 (rtnl_mutex){--..}:
>       [<ffffffff81054b58>] __lock_acquire+0xbd3/0xd63
>       [<ffffffff81054d46>] lock_acquire+0x5e/0x78
>       [<ffffffff8129fa0b>] mutex_lock_nested+0xf7/0x295
>       [<ffffffff8122625f>] rtnl_lock+0x12/0x14
>       [<ffffffff8815187c>] ieee80211_associated+0x1a0/0x1ee [mac80211]
>       [<ffffffff881542c8>] ieee80211_sta_work+0x167d/0x1800 [mac80211]
>       [<ffffffff81044300>] run_workqueue+0xfc/0x203
>       [<ffffffff810444e7>] worker_thread+0xe0/0xf1
>       [<ffffffff81047aaf>] kthread+0x49/0x76
>       [<ffffffff8100cf78>] child_rip+0xa/0x12
>       [<ffffffffffffffff>] 0xffffffffffffffff
>
>-> #1 (&ifsta->work){--..}:
>       [<ffffffff81054b58>] __lock_acquire+0xbd3/0xd63
>       [<ffffffff81054d46>] lock_acquire+0x5e/0x78
>       [<ffffffff810442fa>] run_workqueue+0xf6/0x203
>       [<ffffffff810444e7>] worker_thread+0xe0/0xf1
>       [<ffffffff81047aaf>] kthread+0x49/0x76
>       [<ffffffff8100cf78>] child_rip+0xa/0x12
>       [<ffffffffffffffff>] 0xffffffffffffffff
>
>-> #0 ((name)){--..}:
>       [<ffffffff81054a5b>] __lock_acquire+0xad6/0xd63
>       [<ffffffff81054d46>] lock_acquire+0x5e/0x78
>       [<ffffffff81044dfc>] flush_workqueue+0x5b/0xa6
>       [<ffffffff88148717>] ieee80211_stop+0x323/0x405 [mac80211]
>       [<ffffffff8121d8cf>] dev_close+0x62/0x83
>       [<ffffffff8121d978>] rollback_registered+0x88/0x118
>       [<ffffffff8121da49>] unregister_netdevice+0x41/0x78
>       [<ffffffff88154755>] __ieee80211_if_del+0x1d/0x21 [mac80211]
>       [<ffffffff8814721f>] ieee80211_unregister_hw+0x77/0x14f [mac80211]
>       [<ffffffff881c56bc>] p54u_disconnect+0x1e/0x47 [p54usb]
>       [<ffffffff811d1b29>] usb_unbind_interface+0x5f/0xc4
>       [<ffffffff811b6c37>] __device_release_driver+0x9f/0xc8
>       [<ffffffff811b6dc5>] device_release_driver+0x40/0x56
>       [<ffffffff811b61eb>] bus_remove_device+0xa6/0xc8
>       [<ffffffff811b4d3d>] device_del+0x13a/0x1c6
>       [<ffffffff811cf0d5>] usb_disable_device+0x7d/0xf9
>       [<ffffffff811cb15b>] usb_disconnect+0xb7/0x16c
>       [<ffffffff811cc009>] hub_thread+0x61f/0xf91
>       [<ffffffff81047aaf>] kthread+0x49/0x76
>       [<ffffffff8100cf78>] child_rip+0xa/0x12
>       [<ffffffffffffffff>] 0xffffffffffffffff
>
>other info that might help us debug this:
>
>1 lock held by khubd/167:
> #0:  (rtnl_mutex){--..}, at: [<ffffffff8122625f>] rtnl_lock+0x12/0x14
>
>stack backtrace:
>Pid: 167, comm: khubd Not tainted 2.6.25-0.113.rc5.git2.fc9 #1
>
>Call Trace:
> [<ffffffff81053cea>] print_circular_bug_tail+0x70/0x7b
> [<ffffffff81053b02>] ? print_circular_bug_entry+0x48/0x4f
> [<ffffffff81054a5b>] __lock_acquire+0xad6/0xd63
> [<ffffffff81054d46>] lock_acquire+0x5e/0x78
> [<ffffffff81044da1>] ? flush_workqueue+0x0/0xa6
> [<ffffffff81044dfc>] flush_workqueue+0x5b/0xa6
> [<ffffffff88148717>] :mac80211:ieee80211_stop+0x323/0x405
> [<ffffffff812a1482>] ? _spin_unlock_bh+0x2f/0x33
> [<ffffffff8121d8cf>] dev_close+0x62/0x83
> [<ffffffff8121d978>] rollback_registered+0x88/0x118
> [<ffffffff8121da49>] unregister_netdevice+0x41/0x78
> [<ffffffff88154755>] :mac80211:__ieee80211_if_del+0x1d/0x21
> [<ffffffff8814721f>] :mac80211:ieee80211_unregister_hw+0x77/0x14f
> [<ffffffff881c56bc>] :p54usb:p54u_disconnect+0x1e/0x47
> [<ffffffff811d1b29>] usb_unbind_interface+0x5f/0xc4
> [<ffffffff811b6c37>] __device_release_driver+0x9f/0xc8
> [<ffffffff811b6dc5>] device_release_driver+0x40/0x56
> [<ffffffff811b61eb>] bus_remove_device+0xa6/0xc8
> [<ffffffff811b4d3d>] device_del+0x13a/0x1c6
> [<ffffffff811cf0d5>] usb_disable_device+0x7d/0xf9
> [<ffffffff811cb15b>] usb_disconnect+0xb7/0x16c
> [<ffffffff811cc009>] hub_thread+0x61f/0xf91
> [<ffffffff81047dc7>] ? autoremove_wake_function+0x0/0x38
> [<ffffffff811cb9ea>] ? hub_thread+0x0/0xf91
> [<ffffffff81047aaf>] kthread+0x49/0x76
> [<ffffffff8100cf78>] child_rip+0xa/0x12
> [<ffffffff8100c68f>] ? restore_args+0x0/0x30
> [<ffffffff81047a66>] ? kthread+0x0/0x76
> [<ffffffff8100cf6e>] ? child_rip+0x0/0x12
>
>usb 1-7: new high speed USB device using ehci_hcd and address 5
>usb 1-7: configuration #1 chosen from 1 choice
>p54: LM86 firmware
>p54: FW rev 2.5.8.0 - Softmac protocol 3.0
>p54: unknown eeprom code : 0x1
>p54: unknown eeprom code : 0x3
>p54: unknown eeprom code : 0x1007
>p54: unknown eeprom code : 0x1008
>p54: unknown eeprom code : 0x1100
>p54: unknown eeprom code : 0x1905
>phy1: Selected rate control algorithm 'pid'
>phy1: hwaddr 00:0f:b5:02:94:dd, isl3887
>usb 1-7: New USB device found, idVendor=0846, idProduct=4240
>usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-7: Product: NETGEAR WG111
>usb 1-7: Manufacturer: GlobespanVirata
>usb 1-7: SerialNumber: 3887-0000
>udev: renamed network interface wlan0 to wlan2
>ADDRCONF(NETDEV_UP): wlan2: link is not ready
>wlan2: Initial auth_alg=0
>wlan2: authenticate with AP 00:14:bf:93:3d:8e
>wlan2: RX authentication from 00:14:bf:93:3d:8e (alg=0 transaction=2 status=0)
>wlan2: authenticated
>wlan2: associate with AP 00:14:bf:93:3d:8e
>wlan2: RX AssocResp from 00:14:bf:93:3d:8e (capab=0x401 status=0 aid=3)
>wlan2: associated
>wlan2: switched to long barker preamble (BSSID=00:14:bf:93:3d:8e)
>ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready
>wlan2: disassociate(reason=3)
>wlan2: Initial auth_alg=0
>wlan2: authenticate with AP 00:16:b6:b4:3a:ea
>wlan2: RX authentication from 00:16:b6:b4:3a:ea (alg=0 transaction=2 status=0)
>wlan2: authenticated
>wlan2: associate with AP 00:16:b6:b4:3a:ea
>wlan2: RX AssocResp from 00:16:b6:b4:3a:ea (capab=0x431 status=0 aid=3)
>wlan2: associated
>wlan2: switched to long barker preamble (BSSID=00:16:b6:b4:3a:ea)
>ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready
>wlan2: no IPv6 routers present
>wlan2: No ProbeResp from current AP 00:16:b6:b4:3a:ea - assume out of range
>usb 1-8: new high speed USB device using ehci_hcd and address 6
>usb 1-8: configuration #1 chosen from 1 choice
>usb 1-8: New USB device found, idVendor=13fe, idProduct=1d00
>usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-8: Product: USB DISK 2.0    
>usb 1-8: Manufacturer:         
>usb 1-8: SerialNumber: 077707A50B9D
>Initializing USB Mass Storage driver...
>scsi4 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 6
>usb-storage: waiting for device to settle before scanning
>usb-storage: device scan complete
>scsi 4:0:0:0: Direct-Access              USB DISK 2.0     PMAP PQ: 0 ANSI: 0 CCS
>sd 4:0:0:0: [sdd] 4014080 512-byte hardware sectors (2055 MB)
>sd 4:0:0:0: [sdd] Write Protect is off
>sd 4:0:0:0: [sdd] Mode Sense: 23 00 00 00
>sd 4:0:0:0: [sdd] Assuming drive cache: write through
>sd 4:0:0:0: [sdd] 4014080 512-byte hardware sectors (2055 MB)
>sd 4:0:0:0: [sdd] Write Protect is off
>sd 4:0:0:0: [sdd] Mode Sense: 23 00 00 00
>sd 4:0:0:0: [sdd] Assuming drive cache: write through
> sdd: sdd1
>sd 4:0:0:0: [sdd] Attached SCSI removable disk
>sd 4:0:0:0: Attached scsi generic sg4 type 0

Actions: View

Attachments on bug 437083: 297742 | 297745 | 297805