Attachment 297847 Details for Bug 437206 – lspci -vvv

lspci -vvv

lspci.txt (text/plain), 19.25 KB, created by Ronald Kuetemeier on 2008-03-12 21:34:01 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Ronald Kuetemeier

Created: 2008-03-12 21:34:01 UTC

Size: 19.25 KB

patch

obsolete

>00:00.0 Host bridge: Intel Corporation E7525 Memory Controller Hub (rev 0c)
>	Subsystem: Intel Corporation Unknown device 345c
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Capabilities: [40] Vendor Specific Information <?>
>	Kernel driver in use: e752x_edac
>	Kernel modules: e752x_edac
>
>00:00.1 Class ff00: Intel Corporation E7525/E7520 Error Reporting Registers (rev 0c)
>	Subsystem: Intel Corporation Unknown device 345c
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
>00:02.0 PCI bridge: Intel Corporation E7525/E7520/E7320 PCI Express Port A (rev 0c) (prog-if 00 [Normal decode])
>	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>	I/O behind bridge: 0000f000-00000fff
>	Memory behind bridge: fff00000-000fffff
>	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable-
>		Address: fee00000  Data: 0000
>	Capabilities: [64] Express (v1) Root Port (Slot-), MSI 00
>		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
>			ExtTag- RBE- FLReset-
>		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 256 bytes, MaxReadReq 256 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr+ UnsuppReq- AuxPwr- TransPend-
>		LnkCap:	Port #2, Speed 2.5GT/s, Width x8, ASPM L0s, Latency L0 <4us, L1 unlimited
>			ClockPM- Suprise- LLActRep- BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled+ Retrain- CommClk-
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>		RootCtl: ErrCorrectable+ ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>	Kernel driver in use: pcieport-driver
>
>00:03.0 PCI bridge: Intel Corporation E7525/E7520/E7320 PCI Express Port A1 (rev 0c) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
>	I/O behind bridge: 0000b000-0000bfff
>	Memory behind bridge: dbf00000-dbffffff
>	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable-
>		Address: fee00000  Data: 0000
>	Capabilities: [64] Express (v1) Root Port (Slot-), MSI 00
>		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
>			ExtTag- RBE- FLReset-
>		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 256 bytes, MaxReadReq 256 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>		LnkCap:	Port #3, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 <4us, L1 unlimited
>			ClockPM- Suprise- LLActRep- BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>		RootCtl: ErrCorrectable+ ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>	Kernel driver in use: pcieport-driver
>
>00:04.0 PCI bridge: Intel Corporation E7525/E7520 PCI Express Port B (rev 0c) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
>	I/O behind bridge: 0000c000-0000cfff
>	Memory behind bridge: dc000000-dedfffff
>	Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable-
>		Address: fee00000  Data: 0000
>	Capabilities: [64] Express (v1) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
>			ExtTag- RBE- FLReset-
>		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 256 bytes, MaxReadReq 256 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>		LnkCap:	Port #4, Speed 2.5GT/s, Width x16, ASPM L0s, Latency L0 <4us, L1 unlimited
>			ClockPM- Suprise- LLActRep- BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
>			Slot #  6, PowerLimit 25.000000; Interlock- NoCompl-
>		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>			Control: AttnInd Off, PwrInd On, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
>			Changed: MRL- PresDet- LinkState-
>		RootCtl: ErrCorrectable+ ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>	Kernel driver in use: pcieport-driver
>
>00:1c.0 PCI bridge: Intel Corporation 6300ESB 64-bit PCI-X Bridge (rev 02) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64, Cache Line Size: 64 bytes
>	Bus: primary=00, secondary=04, subordinate=04, sec-latency=48
>	I/O behind bridge: 0000d000-0000dfff
>	Memory behind bridge: dee00000-deefffff
>	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
>	Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [50] PCI-X bridge device
>		Secondary Status: 64bit+ 133MHz- SCD- USC- SCO- SRD- Freq=conv
>		Status: Dev=00:1c.0 64bit+ 133MHz- SCD- USC- SCO- SRD-
>		Upstream: Capacity=65535 CommitmentLimit=65535
>		Downstream: Capacity=65535 CommitmentLimit=65535
>
>00:1d.0 USB Controller: Intel Corporation 6300ESB USB Universal Host Controller (rev 02) (prog-if 00 [UHCI])
>	Subsystem: Intel Corporation Unknown device 345c
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 16
>	Region 4: I/O ports at a880 [size=32]
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>
>00:1d.1 USB Controller: Intel Corporation 6300ESB USB Universal Host Controller (rev 02) (prog-if 00 [UHCI])
>	Subsystem: Intel Corporation Unknown device 345c
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 18
>	Region 4: I/O ports at ac00 [size=32]
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>
>00:1d.4 System peripheral: Intel Corporation 6300ESB Watchdog Timer (rev 02)
>	Subsystem: Intel Corporation Unknown device 345c
>	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Region 0: Memory at dbeff800 (32-bit, non-prefetchable) [size=16]
>	Kernel modules: i6300esb
>
>00:1d.5 PIC: Intel Corporation 6300ESB I/O Advanced Programmable Interrupt Controller (rev 02) (prog-if 20 [IO(X)-APIC])
>	Subsystem: Intel Corporation Unknown device 345c
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Capabilities: [50] PCI-X non-bridge device
>		Command: DPERE- ERO- RBC=512 OST=1
>		Status: Dev=00:1d.5 64bit+ 133MHz- SCD- USC- DC=simple DMMRBC=512 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz-
>
>00:1d.7 USB Controller: Intel Corporation 6300ESB USB2 Enhanced Host Controller (rev 02) (prog-if 20 [EHCI])
>	Subsystem: Intel Corporation Unknown device 345c
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin D routed to IRQ 17
>	Region 0: Memory at dbeffc00 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Debug port: BAR=1 offset=0080
>	Kernel driver in use: ehci_hcd
>	Kernel modules: ehci-hcd
>
>00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 0a) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
>	I/O behind bridge: 0000e000-0000efff
>	Memory behind bridge: def00000-dfffffff
>	Prefetchable memory behind bridge: fff00000-000fffff
>	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>
>00:1f.0 ISA bridge: Intel Corporation 6300ESB LPC Interface Controller (rev 02)
>	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Kernel modules: intel-rng, iTCO_wdt
>
>00:1f.1 IDE interface: Intel Corporation 6300ESB PATA Storage Controller (rev 02) (prog-if 8a [Master SecP PriP])
>	Subsystem: Intel Corporation Unknown device 345c
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
>	Latency: 0
>	Interrupt: pin A routed to IRQ 19
>	Region 0: I/O ports at 01f0 [size=8]
>	Region 1: I/O ports at 03f4 [size=1]
>	Region 2: I/O ports at 0170 [size=8]
>	Region 3: I/O ports at 0374 [size=1]
>	Region 4: I/O ports at fc00 [size=16]
>	Region 5: Memory at 50000000 (32-bit, non-prefetchable) [size=1K]
>	Kernel driver in use: ata_piix
>	Kernel modules: ata_piix
>
>00:1f.2 IDE interface: Intel Corporation 6300ESB SATA Storage Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
>	Subsystem: Intel Corporation Unknown device 345c
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 19
>	Region 0: I/O ports at a800 [size=8]
>	Region 1: I/O ports at a480 [size=4]
>	Region 2: I/O ports at a400 [size=8]
>	Region 3: I/O ports at a080 [size=4]
>	Region 4: I/O ports at a000 [size=16]
>	Kernel driver in use: ata_piix
>	Kernel modules: ata_piix
>
>00:1f.3 SMBus: Intel Corporation 6300ESB SMBus Controller (rev 02)
>	Subsystem: Intel Corporation Unknown device 345c
>	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Interrupt: pin B routed to IRQ 20
>	Region 4: I/O ports at 0400 [size=32]
>	Kernel driver in use: i801_smbus
>	Kernel modules: i2c-i801
>
>02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8050 PCI-E ASF Gigabit Ethernet Controller (rev 18)
>	Subsystem: Intel Corporation Unknown device 3458
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 223
>	Region 0: Memory at dbffc000 (64-bit, non-prefetchable) [size=16K]
>	Region 2: I/O ports at b800 [size=256]
>	Expansion ROM at dbfc0000 [disabled] [size=128K]
>	Capabilities: [48] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
>	Capabilities: [50] Vital Product Data <?>
>	Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
>		Address: 00000000fee0200c  Data: 41c9
>	Capabilities: [e0] Express (v1) Legacy Endpoint, MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
>			ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
>		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 512 bytes
>		DevSta:	CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
>		LnkCap:	Port #3, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <256ns, L1 unlimited
>			ClockPM- Suprise- LLActRep- BwNot-
>		LnkCtl:	ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk-
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>	Kernel driver in use: sky2
>	Kernel modules: sky2
>
>03:00.0 VGA compatible controller: nVidia Corporation G70 [GeForce 7600 GT] (rev a1) (prog-if 00 [VGA controller])
>	Subsystem: eVga.com. Corp. Unknown device c550
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 16
>	Region 0: Memory at dd000000 (32-bit, non-prefetchable) [size=16M]
>	Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
>	Region 3: Memory at dc000000 (64-bit, non-prefetchable) [size=16M]
>	Region 5: I/O ports at cc00 [size=128]
>	[virtual] Expansion ROM at dede0000 [disabled] [size=128K]
>	Capabilities: [60] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [78] Express (v1) Endpoint, MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <1us, L1 <4us
>			ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
>		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
>			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>			MaxPayload 128 bytes, MaxReadReq 512 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>		LnkCap:	Port #4, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <1us, L1 <4us
>			ClockPM- Suprise- LLActRep- BwNot-
>		LnkCtl:	ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk-
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>	Kernel driver in use: nvidia
>	Kernel modules: nvidia, nvidiafb
>
>04:03.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 6c)
>	Subsystem: 3Com Corporation 3C905CX-TX/TX-M Fast Etherlink for PC Management NIC
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64 (2500ns min, 2500ns max), Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 21
>	Region 0: I/O ports at dc00 [size=128]
>	Region 1: Memory at deeffc00 (32-bit, non-prefetchable) [size=128]
>	Expansion ROM at deec0000 [disabled] [size=128K]
>	Capabilities: [dc] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>	Kernel driver in use: 3c59x
>	Kernel modules: 3c59x
>
>05:04.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 08)
>	Subsystem: Ensoniq Creative Sound Blaster AudioPCI64V, AudioPCI128
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort+ <MAbort- >SERR- <PERR- INTx-
>	Latency: 64 (3000ns min, 32000ns max)
>	Interrupt: pin A routed to IRQ 23
>	Region 0: I/O ports at ec00 [size=64]
>	Capabilities: [dc] Power Management version 1
>		Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: ENS1371
>	Kernel modules: snd-ens1371
>
>05:05.0 FireWire (IEEE 1394): Texas Instruments TSB12LV26 IEEE-1394 Controller (Link) (prog-if 10 [OHCI])
>	Subsystem: Texas Instruments Unknown device 8019
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64 (750ns min, 1000ns max), Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 22
>	Region 0: Memory at deffe800 (32-bit, non-prefetchable) [size=2K]
>	Region 1: Memory at deff8000 (32-bit, non-prefetchable) [size=16K]
>	Capabilities: [44] Power Management version 1
>		Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: firewire_ohci
>	Kernel modules: firewire-ohci
>

Actions: View

Attachments on bug 437206: 297847