Attachment 297862 Details for Bug 436659 – Full dmesg with crash

Full dmesg with crash

01.dmesg (text/plain), 42.04 KB, created by Pete Zaitcev on 2008-03-12 22:47:56 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Pete Zaitcev

Created: 2008-03-12 22:47:56 UTC

Size: 42.04 KB

patch

obsolete

>Crash with disconnect of input open by evdev.
>
>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.25-0.95.rc4.fc9 (mockbuild@) (gcc version 4.3.0 20080229 (Red Hat 4.3.0-0.13) (GCC) ) #1 SMP Thu Mar 6 00:50:28 EST 2008
>Command line: ro root=LABEL=F selinux=0 3
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fe8cc00 (usable)
> BIOS-e820: 000000003fe8cc00 - 000000003fe8ec00 (ACPI NVS)
> BIOS-e820: 000000003fe8ec00 - 000000003fe90c00 (ACPI data)
> BIOS-e820: 000000003fe90c00 - 0000000040000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 160) 0 entries of 3200 used
>Entering add_active_range(0, 256, 261772) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.3 present.
>ACPI: RSDP 000FEB00, 0024 (r2 DELL  )
>ACPI: XSDT 000FD23B, 005C (r1 DELL    PESC430        7 ASL        61)
>ACPI: FACP 000FD333, 00F4 (r3 DELL    PESC430        7 ASL        61)
>ACPI: DSDT FFFCE4DF, 2E15 (r1   DELL    dt_ex     1000 INTL 20050309)
>ACPI: FACS 3FE8CC00, 0040
>ACPI: SSDT FFFD14C1, 0088 (r1   DELL    st_ex     1000 INTL 20050309)
>ACPI: APIC 000FD427, 0072 (r1 DELL    PESC430        7 ASL        61)
>ACPI: BOOT 000FD499, 0028 (r1 DELL    PESC430        7 ASL        61)
>ACPI: ASF! 000FD4C1, 0067 (r16 DELL    PESC430        7 ASL        61)
>ACPI: MCFG 000FD528, 003E (r1 DELL    PESC430        7 ASL        61)
>ACPI: HPET 000FD566, 0038 (r1 DELL    PESC430        7 ASL        61)
>No NUMA configuration found
>Faking a node at 0000000000000000-000000003fe8c000
>Entering add_active_range(0, 0, 160) 0 entries of 3200 used
>Entering add_active_range(0, 256, 261772) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000003fe8c000
>  NODE_DATA [000000000000b000 - 0000000000012fff]
>  bootmap [0000000000013000 -  000000000001afd7] pages 8
>early res: 0 [0-fff] BIOS data page
>early res: 1 [6000-7fff] SMP_TRAMPOLINE
>early res: 2 [200000-bf5b57] TEXT DATA BSS
>early res: 3 [37c89000-37fef4e1] RAMDISK
>early res: 4 [9fc00-a0bff] EBDA
>early res: 5 [8000-afff] PGTABLE
> [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
> [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001400000 on node 0
> [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001800000 on node 0
> [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001c00000 on node 0
> [ffffe20000800000-ffffe200009fffff] PMD ->ffff810001e00000 on node 0
> [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002200000 on node 0
> [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002600000 on node 0
> [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002800000 on node 0
> [ffffe20001000000-ffffe200011fffff] PMD ->ffff810002c00000 on node 0
> [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003000000 on node 0
> [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003200000 on node 0
> [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003600000 on node 0
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0:        0 ->      160
>    0:      256 ->   261772
>On node 0 totalpages: 261676
>  DMA zone: 96 pages used for memmap
>  DMA zone: 2558 pages reserved
>  DMA zone: 1346 pages, LIFO batch:0
>  DMA32 zone: 6039 pages used for memmap
>  DMA32 zone: 251637 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
>ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 8, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>PERCPU: Allocating 436896 bytes of per cpu data
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 252983
>Policy zone: DMA32
>Kernel command line: ro root=LABEL=F selinux=0 3
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC calibrated against PM_TIMER
>time.c: Detected 2792.995 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          48
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1712 kB
> per task-struct memory footprint: 3456 bytes
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 1006432k/1047088k available (2718k kernel code, 40272k reserved, 1460k data, 740k init)
>CPA: page pool initialized 16 of 16 pages preallocated
>SLUB: Genslabs=13, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 5593.68 BogoMIPS (lpj=2796840)
>Security Framework initialized
>SELinux:  Disabled at boot.
>Capability LSM initialized
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>checking if image is initramfs... it is
>debug: unmapping init memory ffff810037c89000..ffff810037ff0000
>ACPI: Core revision 20070126
>ACPI: Checking initramfs for custom DSDT
>Using local APIC timer interrupts.
>APIC timer calibration result 12468713
>Detected 12.468 MHz APIC timer.
>lockdep: fixing up alternatives.
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5585.82 BogoMIPS (lpj=2792911)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>              Intel(R) Pentium(R) D CPU 2.80GHz stepping 04
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=96 bytes
>sizeof(inode)=1088 bytes
>sizeof(dentry)=256 bytes
>sizeof(ext3inode)=1488 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=224 bytes
>sizeof(task_struct)=9968 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000000,00000003
>  groups: 00000000,00000001 00000000,00000002
>  domain 1: span 00000000,00000003
>   groups: 00000000,00000003
>CPU1 attaching sched-domain:
> domain 0: span 00000000,00000003
>  groups: 00000000,00000002 00000000,00000001
>  domain 1: span 00000000,00000003
>   groups: 00000000,00000003
>khelper used greatest stack depth: 6040 bytes left
>net_namespace: 1152 bytes
>Time: 19:38:17  Date: 03/12/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using MMCONFIG at f0000000 - f3ffffff
>PCI: Using configuration type 1
>khelper used greatest stack depth: 5448 bytes left
>ACPI: EC: Look up EC in DSDT
>ACPI: BIOS _OSI(Linux) query ignored
>ACPI: DMI System Vendor: Dell Inc.                
>ACPI: DMI Product Name: PowerEdge SC430              
>ACPI: DMI Product Version: 
>ACPI: DMI Board Name: 0M9873
>ACPI: DMI BIOS Vendor: Dell Inc.                
>ACPI: DMI BIOS Date: 10/06/2006
>ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
>ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI5._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI6._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 10 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>DMAR:parse DMAR table failure.
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 11
>hpet0: 3 64-bit timers, 14318180 Hz
>ACPI: RTC can wake from S4
>Time: tsc clocksource has been installed.
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>system 00:01: ioport range 0x800-0x85f has been reserved
>system 00:01: ioport range 0xc00-0xc7f has been reserved
>system 00:01: ioport range 0x860-0x8ff could not be reserved
>system 00:08: iomem range 0x0-0x9ffff could not be reserved
>system 00:08: iomem range 0x100000-0xffffff could not be reserved
>system 00:08: iomem range 0x1000000-0x3fe8cbff could not be reserved
>system 00:08: iomem range 0xf0000-0xfffff could not be reserved
>system 00:08: iomem range 0xc0000-0xcbfff has been reserved
>system 00:08: iomem range 0xfec00000-0xfecfffff could not be reserved
>system 00:08: iomem range 0xfee00000-0xfeefffff could not be reserved
>system 00:08: iomem range 0xfed20000-0xfed9ffff could not be reserved
>system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved
>system 00:08: iomem range 0xffc00000-0xffffffff could not be reserved
>system 00:09: iomem range 0xf0000000-0xf3ffffff could not be reserved
>system 00:09: iomem range 0xfeda0000-0xfedacfff has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: 0xfea00000-0xfeafffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: 0xfe900000-0xfe9fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.4
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.5
>  IO window: disabled.
>  MEM window: 0xfe800000-0xfe8fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: d000-dfff
>  MEM window: 0xfe600000-0xfe7fffff
>  PREFETCH window: 0x00000000fc000000-0x00000000fdffffff
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
>TCP bind hash table entries: 65536 (order: 10, 4194304 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>Simple Boot Flag at 0x7a set to 0x1
>audit: initializing netlink socket (disabled)
>type=2000 audit(1205350697.831:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:05:07.0: Boot video device
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>Allocate Port Service[0000:00:01.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>Allocate Port Service[0000:00:1c.4:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.5:pcie00]
>Allocate Port Service[0000:00:1c.5:pcie02]
>Allocate Port Service[0000:00:1c.5:pcie03]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: ACPI0007:01 is registered as cooling_device1
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>isa bounce pool size: 16 pages
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one day
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>registered taskstats version 1
>  Magic number: 0:479:647
>debug: unmapping init memory ffffffff814ca000..ffffffff81583000
>Write protecting the kernel read-only data: 1144k
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 21, io mem 0xffa80800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25-0.95.rc4.fc9 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
>ACPI: PCI Interrupt 0000:05:04.3[A] -> GSI 16 (level, low) -> IRQ 16
>ehci_hcd 0000:05:04.3: EHCI Host Controller
>ehci_hcd 0000:05:04.3: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:05:04.3: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:05:04.3
>ehci_hcd 0000:05:04.3: irq 16, io mem 0xfe6bc700
>ehci_hcd 0000:05:04.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25-0.95.rc4.fc9 ehci_hcd
>usb usb2: SerialNumber: 0000:05:04.3
>modprobe used greatest stack depth: 4512 bytes left
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:05:04.0[B] -> GSI 17 (level, low) -> IRQ 17
>ohci_hcd 0000:05:04.0: OHCI Host Controller
>ohci_hcd 0000:05:04.0: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:05:04.0: irq 17, io mem 0xfe6bd000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: OHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25-0.95.rc4.fc9 ohci_hcd
>usb usb3: SerialNumber: 0000:05:04.0
>ACPI: PCI Interrupt 0000:05:04.1[C] -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:05:04.1: OHCI Host Controller
>ohci_hcd 0000:05:04.1: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:05:04.1: irq 18, io mem 0xfe6be000
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 2-3: new high speed USB device using ehci_hcd and address 2
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: OHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25-0.95.rc4.fc9 ohci_hcd
>usb usb4: SerialNumber: 0000:05:04.1
>ACPI: PCI Interrupt 0000:05:04.2[D] -> GSI 19 (level, low) -> IRQ 19
>ohci_hcd 0000:05:04.2: OHCI Host Controller
>ohci_hcd 0000:05:04.2: new USB bus registered, assigned bus number 5
>ohci_hcd 0000:05:04.2: irq 19, io mem 0xfe6bf000
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 2-3: configuration #1 chosen from 1 choice
>hub 2-3:1.0: USB hub found
>hub 2-3:1.0: 4 ports detected
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: OHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25-0.95.rc4.fc9 ohci_hcd
>usb usb5: SerialNumber: 0000:05:04.2
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>usb 2-3: New USB device found, idVendor=0409, idProduct=0058
>usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-3: Product: USB2.0 Hub Controller
>usb 2-3: Manufacturer: NEC Corporation
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.25-0.95.rc4.fc9 uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: UHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.25-0.95.rc4.fc9 uhci_hcd
>usb usb7: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
>usb usb8: configuration #1 chosen from 1 choice
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 2 ports detected
>usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb8: Product: UHCI Host Controller
>usb usb8: Manufacturer: Linux 2.6.25-0.95.rc4.fc9 uhci_hcd
>usb usb8: SerialNumber: 0000:00:1d.2
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 9
>uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20
>usb usb9: configuration #1 chosen from 1 choice
>hub 9-0:1.0: USB hub found
>hub 9-0:1.0: 2 ports detected
>usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb9: Product: UHCI Host Controller
>usb usb9: Manufacturer: Linux 2.6.25-0.95.rc4.fc9 uhci_hcd
>usb usb9: SerialNumber: 0000:00:1d.3
>modprobe used greatest stack depth: 4504 bytes left
>usb 6-2: new full speed USB device using uhci_hcd and address 2
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
>usb 6-2: configuration #1 chosen from 1 choice
>input: ATEN UC100KM V2.00 as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input1
>input,hidraw0: USB HID v1.00 Keyboard [ATEN UC100KM V2.00] on usb-0000:00:1d.0-2
>input: ATEN UC100KM V2.00 as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/input/input2
>input,hidraw1: USB HID v1.00 Mouse [ATEN UC100KM V2.00] on usb-0000:00:1d.0-2
>usb 6-2: New USB device found, idVendor=0557, idProduct=2004
>usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 6-2: Product: UC100KM V2.00
>usb 6-2: Manufacturer: ATEN
>ata1.00: ATAPI: LITE-ON CD-ROM LTN-4891S, NDS3, max UDMA/33
>ata1.01: ATAPI: TSSTcorp CD-RW/DVD-ROM TS-H492C, DE02, max UDMA/33
>ata1.00: configured for UDMA/33
>ata1.01: configured for UDMA/33
>ata2: port disabled. ignoring.
>scsi 0:0:0:0: CD-ROM            LITE-ON  CD-ROM LTN-4891S NDS3 PQ: 0 ANSI: 5
>scsi 0:0:1:0: CD-ROM            TSSTcorp CDRWDVD TS-H492C DE02 PQ: 0 ANSI: 5
>ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 20
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 20
>ata4: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 20
>ata3.00: ATA-7: Maxtor 7L250S0, BACE1G10, max UDMA/133
>ata3.00: 488281250 sectors, multi 8: LBA48 NCQ (depth 0/32)
>ata3.01: ATA-6: WDC WD2500JD-75GBB0, 02.05D02, max UDMA/100
>ata3.01: 488281250 sectors, multi 8: LBA48 
>ata3.01: applying bridge limits
>ata3.00: configured for UDMA/133
>ata3.01: configured for UDMA/100
>scsi 2:0:0:0: Direct-Access     ATA      Maxtor 7L250S0   BACE PQ: 0 ANSI: 5
>sd 2:0:0:0: [sda] 488281250 512-byte hardware sectors (250000 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sda] 488281250 512-byte hardware sectors (250000 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
>sd 2:0:0:0: [sda] Attached SCSI disk
>scsi 2:0:1:0: Direct-Access     ATA      WDC WD2500JD-75G 02.0 PQ: 0 ANSI: 5
>sd 2:0:1:0: [sdb] 488281250 512-byte hardware sectors (250000 MB)
>sd 2:0:1:0: [sdb] Write Protect is off
>sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:1:0: [sdb] 488281250 512-byte hardware sectors (250000 MB)
>sd 2:0:1:0: [sdb] Write Protect is off
>sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 sdb3
>sd 2:0:1:0: [sdb] Attached SCSI disk
>modprobe used greatest stack depth: 2688 bytes left
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: sda5: orphan cleanup on readonly fs
>ext3_orphan_cleanup: deleting unreferenced inode 1331713
>ext3_orphan_cleanup: deleting unreferenced inode 1039377
>ext3_orphan_cleanup: deleting unreferenced inode 1039384
>EXT3-fs: sda5: 3 orphan inodes deleted
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>scsi 0:0:0:0: Attached scsi generic sg0 type 5
>scsi 0:0:1:0: Attached scsi generic sg1 type 5
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>sd 2:0:1:0: Attached scsi generic sg3 type 0
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:0:0: Attached scsi CD-ROM sr0
>sr1: scsi3-mmc drive: 8x/48x writer cd/rw xa/form2 cdda tray
>sr 0:0:1:0: Attached scsi CD-ROM sr1
>input: Power Button (FF) as /devices/virtual/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/virtual/input/input4
>ACPI: Power Button (CM) [VBTN]
>EDAC MC: Ver: 2.1.0 Mar  6 2008
>EDAC MC0: Giving out device to 'i3000_edac' 'i3000': DEV 0000:00:00.0
>EDAC PCI0: Giving out device to module 'i3000_edac' controller 'EDAC PCI controller': DEV '0000:00:00.0' (POLLED)
>tg3.c:v3.87 (December 20, 2007)
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>eth0: Tigon3 [partno(BCM95751) rev 4001 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:12:3f:74:f6:e0
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>iTCO_vendor_support: vendor-support=0
>ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 18 (level, low) -> IRQ 18
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
>iTCO_wdt: No card detected
>intel_rng: Firmware space is locked read-only. If you can't or
>intel_rng: don't want to disable this in firmware setup, and if
>intel_rng: you are certain that your system has a functional
>intel_rng: RNG, try using the 'no_fwh_detect' option.
>firewire_ohci: Added fw-ohci device 0000:05:02.0, OHCI version 1.0
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
>input: PC Speaker as /devices/platform/pcspkr/input/input5
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>firewire_core: created device fw0: GUID 00110666458869c3, S400
>dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>EXT3 FS on sda5, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 983032k swap on /dev/mapper/VG0-swap0.  Priority:-1 extents:1 across:983032k
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>tg3: eth0: Link is up at 100 Mbps, full duplex.
>tg3: eth0: Flow control is on for TX and on for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>Loading iSCSI transport class v2.0-868.
>iscsi: registered transport (tcp)
>iscsi: registered transport (iser)
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bridge firewalling registered
>virbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>virbr0: starting userspace STP failed, starting kernel STP
>usb 2-3.1: new low speed USB device using ehci_hcd and address 3
>usb 2-3.1: configuration #1 chosen from 1 choice
>input: QTRONIX USB Keyboard and Mouse as /devices/pci0000:00/0000:00:1e.0/0000:05:04.3/usb2/2-3/2-3.1/2-3.1:1.0/input/input6
>input,hidraw2: USB HID v1.00 Keyboard [QTRONIX USB Keyboard and Mouse] on usb-0000:05:04.3-3.1
>input: QTRONIX USB Keyboard and Mouse as /devices/pci0000:00/0000:00:1e.0/0000:05:04.3/usb2/2-3/2-3.1/2-3.1:1.1/input/input7
>input,hidraw3: USB HID v1.00 Mouse [QTRONIX USB Keyboard and Mouse] on usb-0000:05:04.3-3.1
>usb 2-3.1: New USB device found, idVendor=05c7, idProduct=2012
>usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-3.1: Product: USB Keyboard and Mouse
>usb 2-3.1: Manufacturer: QTRONIX
>usb 2-3.1: USB disconnect, address 3
>usb 2-3.1: new low speed USB device using ehci_hcd and address 4
>usb 2-3.1: configuration #1 chosen from 1 choice
>input: QTRONIX USB Keyboard and Mouse as /devices/pci0000:00/0000:00:1e.0/0000:05:04.3/usb2/2-3/2-3.1/2-3.1:1.0/input/input8
>input,hidraw2: USB HID v1.00 Keyboard [QTRONIX USB Keyboard and Mouse] on usb-0000:05:04.3-3.1
>input: QTRONIX USB Keyboard and Mouse as /devices/pci0000:00/0000:00:1e.0/0000:05:04.3/usb2/2-3/2-3.1/2-3.1:1.1/input/input9
>input,hidraw3: USB HID v1.00 Mouse [QTRONIX USB Keyboard and Mouse] on usb-0000:05:04.3-3.1
>usb 2-3.1: New USB device found, idVendor=05c7, idProduct=2012
>usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-3.1: Product: USB Keyboard and Mouse
>usb 2-3.1: Manufacturer: QTRONIX
>usb 2-3.1: USB disconnect, address 4
>usb 2-3.1: new low speed USB device using ehci_hcd and address 5
>usb 2-3.1: configuration #1 chosen from 1 choice
>input: QTRONIX USB Keyboard and Mouse as /devices/pci0000:00/0000:00:1e.0/0000:05:04.3/usb2/2-3/2-3.1/2-3.1:1.0/input/input10
>input,hidraw2: USB HID v1.00 Keyboard [QTRONIX USB Keyboard and Mouse] on usb-0000:05:04.3-3.1
>input: QTRONIX USB Keyboard and Mouse as /devices/pci0000:00/0000:00:1e.0/0000:05:04.3/usb2/2-3/2-3.1/2-3.1:1.1/input/input11
>input,hidraw3: USB HID v1.00 Mouse [QTRONIX USB Keyboard and Mouse] on usb-0000:05:04.3-3.1
>usb 2-3.1: New USB device found, idVendor=05c7, idProduct=2012
>usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-3.1: Product: USB Keyboard and Mouse
>usb 2-3.1: Manufacturer: QTRONIX
>usb 2-3.1: USB disconnect, address 5
>usb 2-3.1: new low speed USB device using ehci_hcd and address 6
>usb 2-3.1: configuration #1 chosen from 1 choice
>input: QTRONIX USB Keyboard and Mouse as /devices/pci0000:00/0000:00:1e.0/0000:05:04.3/usb2/2-3/2-3.1/2-3.1:1.0/input/input12
>input,hidraw2: USB HID v1.00 Keyboard [QTRONIX USB Keyboard and Mouse] on usb-0000:05:04.3-3.1
>input: QTRONIX USB Keyboard and Mouse as /devices/pci0000:00/0000:00:1e.0/0000:05:04.3/usb2/2-3/2-3.1/2-3.1:1.1/input/input13
>input,hidraw3: USB HID v1.00 Mouse [QTRONIX USB Keyboard and Mouse] on usb-0000:05:04.3-3.1
>usb 2-3.1: New USB device found, idVendor=05c7, idProduct=2012
>usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-3.1: Product: USB Keyboard and Mouse
>usb 2-3.1: Manufacturer: QTRONIX
>usb 2-3.1: USB disconnect, address 6
>usb 2-3.1: new low speed USB device using ehci_hcd and address 7
>usb 2-3.1: configuration #1 chosen from 1 choice
>input: QTRONIX USB Keyboard and Mouse as /devices/pci0000:00/0000:00:1e.0/0000:05:04.3/usb2/2-3/2-3.1/2-3.1:1.0/input/input14
>input,hidraw2: USB HID v1.00 Keyboard [QTRONIX USB Keyboard and Mouse] on usb-0000:05:04.3-3.1
>input: QTRONIX USB Keyboard and Mouse as /devices/pci0000:00/0000:00:1e.0/0000:05:04.3/usb2/2-3/2-3.1/2-3.1:1.1/input/input15
>input,hidraw3: USB HID v1.00 Mouse [QTRONIX USB Keyboard and Mouse] on usb-0000:05:04.3-3.1
>usb 2-3.1: New USB device found, idVendor=05c7, idProduct=2012
>usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-3.1: Product: USB Keyboard and Mouse
>usb 2-3.1: Manufacturer: QTRONIX
>usb 2-3.1: USB disconnect, address 7
>usb 2-3.1: new low speed USB device using ehci_hcd and address 8
>usb 2-3.1: configuration #1 chosen from 1 choice
>input: QTRONIX USB Keyboard and Mouse as /devices/pci0000:00/0000:00:1e.0/0000:05:04.3/usb2/2-3/2-3.1/2-3.1:1.0/input/input16
>input,hidraw2: USB HID v1.00 Keyboard [QTRONIX USB Keyboard and Mouse] on usb-0000:05:04.3-3.1
>input: QTRONIX USB Keyboard and Mouse as /devices/pci0000:00/0000:00:1e.0/0000:05:04.3/usb2/2-3/2-3.1/2-3.1:1.1/input/input17
>input,hidraw3: USB HID v1.00 Mouse [QTRONIX USB Keyboard and Mouse] on usb-0000:05:04.3-3.1
>usb 2-3.1: New USB device found, idVendor=05c7, idProduct=2012
>usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-3.1: Product: USB Keyboard and Mouse
>usb 2-3.1: Manufacturer: QTRONIX
>usb 2-3.1: USB disconnect, address 8
>------------[ cut here ]------------
>WARNING: at kernel/mutex.c:134 mutex_lock_nested+0xca/0x295() (Not tainted)
>Modules linked in: ipt_MASQUERADE iptable_nat nf_nat bridge rfcomm l2cap bluetooth autofs4 ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp libiscsi scsi_transport_iscsi nf_conntrack_ftp nf_conntrack_netbios_ns nf_conntrack_ipv4 xt_state nf_conntrack ipt_REJECT iptable_filter ip_tables xt_tcpudp ip6t_REJECT ip6table_filter ip6_tables x_tables ipv6 ext2 dcdbas floppy serio_raw pcspkr i2c_i801 i2c_core iTCO_wdt firewire_ohci iTCO_vendor_support firewire_core crc_itu_t tg3 i3000_edac edac_core button sr_mod cdrom sg dm_snapshot dm_zero dm_mirror dm_mod ata_generic pata_acpi ata_piix libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: freq_table]
>Pid: 20824, comm: evtest-x Not tainted 2.6.25-0.95.rc4.fc9 #1
>
>Call Trace:
> [<ffffffff8103446c>] warn_on_slowpath+0x60/0x8e
> [<ffffffff810537c6>] ? mark_held_locks+0x5c/0x77
> [<ffffffff812a1341>] ? _spin_unlock_irq+0x2b/0x30
> [<ffffffff81053957>] ? trace_hardirqs_on+0xf1/0x115
> [<ffffffff812a1341>] ? _spin_unlock_irq+0x2b/0x30
> [<ffffffff8129efda>] ? wait_for_common+0x122/0x134
> [<ffffffff8102cd56>] ? default_wake_function+0x0/0xf
> [<ffffffff8129f86e>] mutex_lock_nested+0xca/0x295
> [<ffffffff811dfdc2>] ? input_release_device+0x1f/0x34
> [<ffffffff8129f076>] ? wait_for_completion+0x18/0x1a
> [<ffffffff81045cf1>] ? synchronize_rcu+0x35/0x3c
> [<ffffffff81045d18>] ? wakeme_after_rcu+0x0/0x10
> [<ffffffff811dfdc2>] input_release_device+0x1f/0x34
> [<ffffffff811e3d1b>] evdev_release+0x50/0xc9
> [<ffffffff810abc57>] __fput+0xca/0x18a
> [<ffffffff810abd2b>] fput+0x14/0x16
> [<ffffffff810a8f42>] filp_close+0x66/0x71
> [<ffffffff810364b6>] put_files_struct+0x74/0xc8
> [<ffffffff81036551>] __exit_files+0x47/0x50
> [<ffffffff81037dae>] do_exit+0x295/0x774
> [<ffffffff8103830f>] do_group_exit+0x82/0xa0
> [<ffffffff8103833f>] sys_exit_group+0x12/0x14
> [<ffffffff8100c1c7>] tracesys+0xdc/0xe1
>
>---[ end trace 9a38f3968ef2eac9 ]---
>general protection fault: 0000 [1] SMP DEBUG_PAGEALLOC
>CPU 1 
>Modules linked in: ipt_MASQUERADE iptable_nat nf_nat bridge rfcomm l2cap bluetooth autofs4 ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp libiscsi scsi_transport_iscsi nf_conntrack_ftp nf_conntrack_netbios_ns nf_conntrack_ipv4 xt_state nf_conntrack ipt_REJECT iptable_filter ip_tables xt_tcpudp ip6t_REJECT ip6table_filter ip6_tables x_tables ipv6 ext2 dcdbas floppy serio_raw pcspkr i2c_i801 i2c_core iTCO_wdt firewire_ohci iTCO_vendor_support firewire_core crc_itu_t tg3 i3000_edac edac_core button sr_mod cdrom sg dm_snapshot dm_zero dm_mirror dm_mod ata_generic pata_acpi ata_piix libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: freq_table]
>Pid: 20824, comm: evtest-x Not tainted 2.6.25-0.95.rc4.fc9 #1
>RIP: 0010:[<ffffffff8113f68c>]  [<ffffffff8113f68c>] __list_add+0x2e/0x5b
>RSP: 0018:ffff81002fd89d08  EFLAGS: 00010046
>RAX: 6b6b6b6b6b6b6b6b RBX: ffffffffffffffff RCX: ffff81002fd89d08
>RDX: ffff8100362a3810 RSI: ffff8100362a3810 RDI: ffff81002fd89d38
>RBP: ffff81002fd89d08 R08: 6b6b6b6b6b6b6b6b R09: 0000000000000001
>R10: ffffffff811dfdc2 R11: 0000000000000092 R12: ffff8100362a37d0
>R13: 0000000000000246 R14: ffff8100362a37d8 R15: ffff8100362a3838
>FS:  00007f999aea96f0(0000) GS:ffff81003f8114b0(0000) knlGS:0000000000000000
>CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
>CR2: 0000000000f05098 CR3: 0000000000201000 CR4: 00000000000006a0
>DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
>Process evtest-x (pid: 20824, threadinfo ffff81002fd88000, task ffff81002fcf0000)
>Stack:  ffff81002fd89d98 ffffffff8129f8cb ffffffff811dfdc2 000000003e0e6500
> ffff81002fcf0000 ffff8100362a3810 ffff81002fd89d38 ffff81002fd89d38
> 1111111111111111 ffff8100362a37d0 ffff81002fd89d38 dead4ead00000303
>Call Trace:
> [<ffffffff8129f8cb>] mutex_lock_nested+0x127/0x295
> [<ffffffff811dfdc2>] ? input_release_device+0x1f/0x34
> [<ffffffff811dfdc2>] input_release_device+0x1f/0x34
> [<ffffffff811e3d1b>] evdev_release+0x50/0xc9
> [<ffffffff810abc57>] __fput+0xca/0x18a
> [<ffffffff810abd2b>] fput+0x14/0x16
> [<ffffffff810a8f42>] filp_close+0x66/0x71
> [<ffffffff810364b6>] put_files_struct+0x74/0xc8
> [<ffffffff81036551>] __exit_files+0x47/0x50
> [<ffffffff81037dae>] do_exit+0x295/0x774
> [<ffffffff8103830f>] do_group_exit+0x82/0xa0
> [<ffffffff8103833f>] sys_exit_group+0x12/0x14
> [<ffffffff8100c1c7>] tracesys+0xdc/0xe1
>
>
>Code: 42 08 49 89 f0 48 89 d6 48 89 e5 4c 39 c0 74 1b 48 89 d1 4c 89 c6 48 89 c2 48 c7 c7 11 99 38 81 31 c0 e8 b4 86 16 00 0f 0b eb fe <48> 8b 10 48 39 f2 74 15 48 89 c1 48 c7 c7 61 99 38 81 31 c0 e8 
>RIP  [<ffffffff8113f68c>] __list_add+0x2e/0x5b
> RSP <ffff81002fd89d08>
>---[ end trace 9a38f3968ef2eac9 ]---
>Fixing recursive fault but reboot is needed!
>usb 2-3.1: new low speed USB device using ehci_hcd and address 9
>=============================================================================
>BUG kmalloc-4096 (Tainted: G      D ): Poison overwritten
>-----------------------------------------------------------------------------
>
>INFO: 0xffff8100362a37d9-0xffff8100362a37d9. First byte 0x6c instead of 0x6b
>INFO: Allocated in stat_open+0x4d/0x91 age=987 cpu=0 pid=562
>INFO: Freed in seq_read+0x143/0x2a2 age=988 cpu=0 pid=562
>INFO: Slab 0xffffe2000144fc00 used=3 fp=0xffff8100362a30d8 flags=0x300800000040c3
>INFO: Object 0xffff8100362a30d8 @offset=12504 fp=0xffff8100362a4120
>
>Bytes b4 0xffff8100362a30c8:  b0 18 fc ff 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a °.üÿ....ZZZZZZZZ
>  Object 0xffff8100362a30d8:  6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
>  Object 0xffff8100362a30e8:  6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
>  Object 0xffff8100362a30f8:  6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
>  Object 0xffff8100362a3108:  6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
>  Object 0xffff8100362a3118:  6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
>  Object 0xffff8100362a3128:  6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
>  Object 0xffff8100362a3138:  6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
>  Object 0xffff8100362a3148:  6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
> Redzone 0xffff8100362a40d8:  bb bb bb bb bb bb bb bb                         »»»»»»»»        
> Padding 0xffff8100362a4118:  5a 5a 5a 5a 5a 5a 5a 5a                         ZZZZZZZZ        
>Pid: 148, comm: khubd Tainted: G      D  2.6.25-0.95.rc4.fc9 #1
>
>Call Trace:
> [<ffffffff810a30da>] print_trailer+0x17e/0x187
> [<ffffffff810a3195>] check_bytes_and_report+0xb2/0xf2
> [<ffffffff810a32d8>] check_object+0xcc/0x209
> [<ffffffff810a50f8>] __slab_alloc+0x3e4/0x4b5
> [<ffffffff811374d5>] ? kobject_uevent_env+0xb4/0x41e
> [<ffffffff811374d5>] ? kobject_uevent_env+0xb4/0x41e
> [<ffffffff810a52ea>] kmem_cache_alloc+0x62/0xa8
> [<ffffffff811374d5>] kobject_uevent_env+0xb4/0x41e
> [<ffffffff8113784a>] kobject_uevent+0xb/0xd
> [<ffffffff811b4ff4>] device_add+0x30d/0x4c0
> [<ffffffff811cae40>] usb_new_device+0x69/0x171
> [<ffffffff811cc312>] hub_thread+0xa84/0xf91
> [<ffffffff81047d9f>] ? autoremove_wake_function+0x0/0x38
> [<ffffffff811cb88e>] ? hub_thread+0x0/0xf91
> [<ffffffff81047a87>] kthread+0x49/0x76
> [<ffffffff8100cf78>] child_rip+0xa/0x12
> [<ffffffff8100c68f>] ? restore_args+0x0/0x30
> [<ffffffff81047a3e>] ? kthread+0x0/0x76
> [<ffffffff8100cf6e>] ? child_rip+0x0/0x12
>
>FIX kmalloc-4096: Restoring 0xffff8100362a37d9-0xffff8100362a37d9=0x6b
>
>FIX kmalloc-4096: Marking all objects used
>usb 2-3.1: configuration #1 chosen from 1 choice
>input: QTRONIX USB Keyboard and Mouse as /devices/pci0000:00/0000:00:1e.0/0000:05:04.3/usb2/2-3/2-3.1/2-3.1:1.0/input/input18
>input,hidraw2: USB HID v1.00 Keyboard [QTRONIX USB Keyboard and Mouse] on usb-0000:05:04.3-3.1
>input: QTRONIX USB Keyboard and Mouse as /devices/pci0000:00/0000:00:1e.0/0000:05:04.3/usb2/2-3/2-3.1/2-3.1:1.1/input/input19
>input,hidraw3: USB HID v1.00 Mouse [QTRONIX USB Keyboard and Mouse] on usb-0000:05:04.3-3.1
>usb 2-3.1: New USB device found, idVendor=05c7, idProduct=2012
>usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-3.1: Product: USB Keyboard and Mouse
>usb 2-3.1: Manufacturer: QTRONIX
>usb 2-3.1: USB disconnect, address 9
>SysRq : HELP : loglevel0-8 reBoot Crashdump show-all-locks(D) tErm Full kIll saK showMem Nice powerOff showPc show-all-timers(Q) unRaw Sync showTasks Unmount shoW-blocked-tasks

Actions: View

Attachments on bug 436659: 297861 | 297862