Attachment 297916 Details for Bug 432587 – dmesg for new kernel

dmesg for new kernel

dmesg.2.6.24.3-12.fc8.txt (text/plain), 17.52 KB, created by Paul Osmialowski on 2008-03-13 11:13:49 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Paul Osmialowski

Created: 2008-03-13 11:13:49 UTC

Size: 17.52 KB

patch

obsolete

>Using PowerMac machine description
>Total memory = 512MB; using 1024kB for hash table (at cff00000)
>Linux version 2.6.24.3-12.fc8 (mockbuild@ppc3.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 Tue Feb 26 13:56:21 EST 2008
>Found initrd at 0xc1a00000:0xc1d7e000
>Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2
>Mapped at 0xfdfc0000
>Found a Intrepid mac-io controller, rev: 0, mapped at 0xfdf40000
>Processor NAP mode on idle enabled.
>PowerMac motherboard: PowerBook G4 15"
>via-pmu: Server Mode is disabled
>PMU driver v2 initialized for Core99, firmware: 0c
>console [udbg0] enabled
>Entering add_active_range(0, 0, 131072) 0 entries of 256 used
>Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->1
>Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->1
>Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->1
>nvram: Checking bank 0...
>nvram: gen0=390, gen1=391
>nvram: Active bank is: 1
>nvram: OF partition at 0x410
>nvram: XP partition at 0x1020
>nvram: NR partition at 0x1120
>Top of RAM: 0x20000000, Total RAM: 0x20000000
>Memory hole size: 0MB
>Zone PFN ranges:
>  DMA             0 ->   131072
>  Normal     131072 ->   131072
>  HighMem    131072 ->   131072
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   131072
>On node 0 totalpages: 131072
>  DMA zone: 1024 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 130048 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  HighMem zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
>Kernel command line: ro rhgb quiet root=LABEL=/1 
>mpic: Setting up MPIC " MPIC 1   " version 1.2 at 80040000, max 4 CPUs
>mpic: ISU size: 64, shift: 6, mask: 3f
>mpic: Initializing for 64 sources
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>GMT Delta read from XPRAM: 0 minutes, DST: off
>time_init: decrementer frequency = 18.432000 MHz
>time_init: processor frequency   = 1499.999994 MHz
>clocksource: timebase mult[d9038e4] shift[22] registered
>clockevent: decrementer mult[4b7] shift[16] cpu[0]
>Console: colour dummy device 80x25
>console handover: boot [udbg0] -> real [tty0]
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>High memory: 0k
>Memory: 509824k/524288k available (4172k kernel code, 13972k reserved, 176k data, 339k bss, 224k init)
>SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay loop... 36.73 BogoMIPS (lpj=18368)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1"
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>net_namespace: 64 bytes
>NET: Registered protocol family 16
>KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
> channel 0 bus <multibus>
> channel 1 bus <multibus>
>KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
> channel 0 bus <multibus>
>PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c
> channel 1 bus <multibus>
> channel 2 bus <multibus>
>PCI: Probing PCI hardware
>PCI: Cannot allocate resource region 0 of device 0001:10:18.0
>PCI: Cannot allocate resource region 0 of device 0001:10:19.0
>Apple USB OHCI 0001:10:18.0 disabled by firmware
>Apple USB OHCI 0001:10:19.0 disabled by firmware
>Linux Plug and Play Support v0.97 (c) Adam Belay
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>Time: timebase clocksource has been installed.
>Switched to high resolution mode on CPU 0
>NET: Registered protocol family 2
>IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
>TCP established hash table entries: 65536 (order: 7, 524288 bytes)
>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
>TCP: Hash tables configured (established 65536 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3576k freed
>Thermal assist unit not available
>Registering PowerMac CPU frequency driver
>Low: 749 Mhz, High: 1499 Mhz, Boot: 749 Mhz
>audit: initializing netlink socket (disabled)
>audit(1205409378.731:1): initialized
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Enabling device 0000:00:10.0 (0006 -> 0007)
>radeonfb (0000:00:10.0): Invalid ROM signature 303 should be 0xaa55
>radeonfb: Retrieved PLL infos from Open Firmware
>radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=203.00 Mhz, System=392.00 MHz
>radeonfb: PLL min 12000 max 35000
>i2c-adapter i2c-2: unable to read EDID block.
>i2c-adapter i2c-2: unable to read EDID block.
>i2c-adapter i2c-2: unable to read EDID block.
>radeonfb: Monitor 1 type LCD found
>radeonfb: EDID probed
>radeonfb: Monitor 2 type no found
>radeonfb: Using Firmware dividers 0x0002008e from PPLL 0
>radeonfb: Dynamic Clock Power Management enabled
>Console: switching to colour frame buffer device 160x53
>radeonfb: Backlight initialized (radeonbl0)
>radeonfb (0000:00:10.0): ATI Radeon NP 
>Generic RTC Driver v1.07
>Macintosh non-volatile memory driver v1.1
>Linux agpgart interface v0.103
>agpgart: Detected Apple UniNorth 2 chipset
>agpgart: configuring for size idx: 8
>agpgart: AGP aperture is 32M @ 0x0
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>Serial: MPC52xx PSC UART driver
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>MacIO PCI driver attached to Intrepid chipset
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>apm_emu: PMU APM Emulation initialized.
>adb: starting probe task...
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>PCI: Enabling device 0002:24:0d.0 (0000 -> 0002)
>adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f
>ADB keyboard at 2, handler 1
>Detected ADB keyboard, type ISO, swapping keys.
>input: ADB keyboard as /devices/virtual/input/input1
>input: ADB Powerbook buttons as /devices/virtual/input/input2
>ADB mouse at 3, handler set to 4 (trackpad)
>input: ADB mouse as /devices/virtual/input/input3
>adb: finished probe task...
>ide0: Found Apple UniNorth ATA-6 controller, bus ID 3, irq 39
>Probing IDE interface ide0...
>hda: FUJITSU MHT2080AT, ATA DISK drive
>hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
>hda: UDMA/100 mode selected
>ide0 at 0xe102a000-0xe102a007,0xe102a160 on irq 39
>ide1: Found Apple KeyLargo ATA-3 controller, bus ID 0, irq 24
>Probing IDE interface ide1...
>hdc: MATSHITADVD-R UJ-825, ATAPI CD/DVD-ROM drive
>hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
>hdc: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
>hdc: set_drive_speed_status: error=0x04 { AbortedCommand }
>hdc: MWDMA2 mode selected
>ide1 at 0xe1014000-0xe1014007,0xe1014160 on irq 24
>hda: max request size: 512KiB
>hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63
>hda: cache flushes supported
> hda: [mac] hda1 hda2 hda3 hda4 hda5 hda6 hda7 hda8
>Yenta: CardBus bridge found at 0001:10:13.0 [0000:0000]
>PCI: Bus 17, cardbus bridge: 0001:10:13.0
>  IO window: 00001000-000011ff
>  IO window: 00001400-000015ff
>  PREFETCH window: 90000000-9fffffff
>  MEM window: f3000000-f33fffff
>Yenta: Enabling burst memory read transactions
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0001:10:13.0, mfunc 0x00001002, devctl 0x60
>Yenta: ISA IRQ mask 0x0000, PCI irq 53
>Socket status: 30000410
>pcmcia: parent PCI bridge I/O window: 0x0 - 0x7fffff
>cs: IO port probe 0x0-0x7fffff: clean.
>pcmcia: parent PCI bridge Memory window: 0xf3000000 - 0xf3ffffff
>pcmcia: parent PCI bridge Memory window: 0x80000000 - 0xafffffff
>mice: PS/2 mouse device common for all mice
>PowerMac i2c bus pmu 2 registered
>PowerMac i2c bus pmu 1 registered
>PowerMac i2c bus mac-io 0 registered
>PowerMac i2c bus uni-n 1 registered
>PowerMac i2c bus uni-n 0 registered
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>registered taskstats version 1
>input: PMU as /devices/virtual/input/input4
>Registered led device: pmu-front-led
>Freeing unused kernel memory: 224k init
>PCI: Enabling device 0001:10:1b.2 (0004 -> 0006)
>ehci_hcd 0001:10:1b.2: EHCI Host Controller
>ehci_hcd 0001:10:1b.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0001:10:1b.2: irq 63, io mem 0xa0000000
>ehci_hcd 0001:10:1b.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 5 ports detected
>pccard: PCMCIA card inserted into slot 0
>cs: memory probe 0xf3000000-0xf3ffffff: excluding 0xf3000000-0xf33fffff
>pcmcia: registering new device pcmcia0.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>Apple USB OHCI 0001:10:18.0 disabled by firmware
>Apple USB OHCI 0001:10:19.0 disabled by firmware
>PCI: Enabling device 0001:10:1a.0 (0000 -> 0002)
>ohci_hcd 0001:10:1a.0: OHCI Host Controller
>ohci_hcd 0001:10:1a.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0001:10:1a.0: irq 29, io mem 0xa0003000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>PCI: Enabling device 0001:10:1b.0 (0000 -> 0002)
>ohci_hcd 0001:10:1b.0: OHCI Host Controller
>ohci_hcd 0001:10:1b.0: new USB bus registered, assigned bus number 3
>ohci_hcd 0001:10:1b.0: irq 63, io mem 0xa0002000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 3 ports detected
>PCI: Enabling device 0001:10:1b.1 (0000 -> 0002)
>ohci_hcd 0001:10:1b.1: OHCI Host Controller
>ohci_hcd 0001:10:1b.1: new USB bus registered, assigned bus number 4
>ohci_hcd 0001:10:1b.1: irq 63, io mem 0xa0001000
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 2-1: new full speed USB device using ohci_hcd and address 2
>USB Universal Host Controller Interface driver v3.0
>usb 2-1: configuration #1 chosen from 1 choice
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>usb 3-1: new full speed USB device using ohci_hcd and address 2
>usb 3-1: configuration #1 chosen from 1 choice
>hub 3-1:1.0: USB hub found
>hub 3-1:1.0: 4 ports detected
>usb 3-1.3: new full speed USB device using ohci_hcd and address 3
>usb 3-1.3: configuration #1 chosen from 1 choice
>SELinux:8192 avtab hash slots allocated.Num of rules:217151
>usb 3-1.4: new full speed USB device using ohci_hcd and address 4
>usb 3-1.4: not running at top speed; connect to a high speed hub
>usb 3-1.4: configuration #1 chosen from 1 choice
>SELinux:8192 avtab hash slots allocated.Num of rules:217151
>security:  8 users, 12 roles, 2363 types, 114 bools, 1 sens, 1024 cats
>security:  67 classes, 217151 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev hda4, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>audit(1205409387.494:2): policy loaded auid=4294967295
>Bluetooth: Core ver 2.11
>SCSI subsystem initialized
>hci_usb: Unknown symbol hci_suspend_dev
>hci_usb: Unknown symbol hci_free_dev
>hci_usb: Unknown symbol hci_resume_dev
>hci_usb: Unknown symbol hci_alloc_dev
>hci_usb: Unknown symbol hci_unregister_dev
>hci_usb: Unknown symbol hci_recv_fragment
>hci_usb: Unknown symbol hci_register_dev
>hci_usb: Unknown symbol hci_suspend_dev
>hci_usb: Unknown symbol hci_free_dev
>hci_usb: Unknown symbol hci_resume_dev
>hci_usb: Unknown symbol hci_alloc_dev
>hci_usb: Unknown symbol hci_unregister_dev
>hci_usb: Unknown symbol hci_recv_fragment
>hci_usb: Unknown symbol hci_register_dev
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>PCI: Enabling device 0001:10:12.0 (0004 -> 0006)
>Bluetooth: HCI USB driver ver 2.9
>usbcore: registered new interface driver hci_usb
>ssb: Sonics Silicon Backplane found on PCI device 0001:10:12.0
>Linux video capture interface: v2.00
>libata version 3.00 loaded.
>sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers v1:1.47
>usb 3-1.3: SN9C10[12] PC Camera Controller detected (vid:pid 0x0C45:0x600D)
>usb 3-1.4: applying rev.C fixup
>usb 3-1.4: applying rev.C fixup
>eth0: register 'MOSCHIP usb-ethernet driver' at usb-0001:10:1b.0-1.4, MOSCHIP 7830 usb-NET adapter, 00:0a:0a:0c:01:b2
>usbcore: registered new interface driver MOSCHIP usb-ethernet driver
>usb 3-1.3: PAS106B image sensor detected
>usb 3-1.3: Initialization succeeded
>usb 3-1.3: V4L2 device registered as /dev/video0
>usb 3-1.3: Optional device control through 'sysfs' interface disabled
>usbcore: registered new interface driver sn9c102
>0.0: ttyS0 at I/O 0x3f8 (irq = 53) is a 16550A
>hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
>Uniform CD-ROM driver Revision: 3.20
>sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com)
>PHY ID: 1410cc1, addr: 0
>eth1: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0d:93:c1:8f:16
>eth1: Found Marvell 88E1111 PHY
>PCI: Enabling device 0002:24:0e.0 (0000 -> 0002)
>firewire_ohci: Added fw-ohci device 0002:24:0e.0, OHCI version 1.10
>firewire_core: created device fw0: GUID 000d93fffec18f16, S800
>pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
>ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port
>ttyPZ1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port
>snd-powermac no longer handles any machines with a layout-id property in the device-tree, use snd-aoa.
>eth1: Link is up at 100 Mbps, full-duplex.
>udev: renamed network interface eth0 to eth2
>b43-phy0: Broadcom 4306 WLAN found
>b43-phy0 debug: Found PHY: Analog 2, Type 2, Revision 2
>b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
>phy0: Selected rate control algorithm 'pid'
>snd-aoa-fabric-layout: found bus with layout 51
>snd-aoa-fabric-layout: Using direct GPIOs
>snd-aoa-codec-tas: found 'deq' node
>snd-aoa-fabric-layout: can use this codec
>snd-aoa-codec-tas: tas found, addr 0x35 on /pci@f2000000/mac-io@17/i2c@18000/deq@6a
>Broadcom 43xx driver loaded [ Features: PMLR, Firmware-ID: FW13 ]
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on hda4, internal journal
>SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
>SGI XFS Quota Management subsystem
>XFS mounting filesystem hda8
>Ending clean XFS mount for filesystem: hda8
>SELinux: initialized (dev hda8, type xfs), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev hda6, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev hda5, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev hda3, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 2097144k swap on /dev/hda7.  Priority:-1 extents:1 across:2097144k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>warning: process `kudzu' used the deprecated sysctl system call with 1.23.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>eth0: Link is up at 100 Mbps, full-duplex.
>eth0: Pause is enabled (rxfifo: 10240 off: 7168 on: 5632)
>audit(1205405829.706:3): audit_pid=1687 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>eth0: no IPv6 routers present
>eth1: no IPv6 routers present
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
>u32 classifier
>    Performance counters on
>    input device check on 
>    Actions configured

Actions: View

Attachments on bug 432587: 297915 | 297916 | 297917 | 297918 | 297919 | 297920