Attachment 298001 Details for Bug 437163 – dmesg output for 2.6.23.1-42.fc8

dmesg output for 2.6.23.1-42.fc8

dmesg2.6.23.1-42.fc8 (text/plain), 19.00 KB, created by ryuhei yokokawa on 2008-03-13 23:52:56 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: ryuhei yokokawa

Created: 2008-03-13 23:52:56 UTC

Size: 19.00 KB

patch

obsolete

>Linux version 2.6.23.1-42.fc8 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Tue Oct 30 13:55:12 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable)
> BIOS-e820: 000000003ffd0000 - 000000003ffde000 (ACPI data)
> BIOS-e820: 000000003ffde000 - 0000000040000000 (ACPI NVS)
> BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000ff780
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 262096) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   262096
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   262096
>On node 0 totalpages: 262096
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 255 pages used for memmap
>  HighMem zone: 32465 pages, LIFO batch:7
>  Movable zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000F9520, 0014 (r0 ACPIAM)
>ACPI: RSDT 3FFD0000, 0038 (r1 A M I  OEMRSDT   8000519 MSFT       97)
>ACPI: FACP 3FFD0200, 0084 (r2 A M I  OEMFACP   8000519 MSFT       97)
>ACPI: DSDT 3FFD0430, 3A9B (r1  1ABZR 1ABZR002        2 INTL  2002026)
>ACPI: FACS 3FFDE000, 0040
>ACPI: APIC 3FFD0390, 005C (r1 A M I  OEMAPIC   8000519 MSFT       97)
>ACPI: MCFG 3FFD03F0, 003C (r1 A M I  OEMMCFG   8000519 MSFT       97)
>ACPI: SSDT 3FFD3ED0, 0D0B (r1    ATI ATIPATCH        1 INTL  2002026)
>ACPI: OEMB 3FFDE040, 0056 (r1 A M I  AMI_OEM   8000519 MSFT       97)
>ATI board detected. Disabling timer routing over 8254.
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:4 APIC version 16
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:bf780000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000
>swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000
>Built 1 zonelists in Zone order.  Total pages: 260049
>Kernel command line: ro root=LABEL=/1 rhgb quiet 
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07a8000 soft=c0788000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1994.462 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1031192k/1048384k available (2183k kernel code, 16384k reserved, 1117k data, 280k init, 130880k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc073f000 - 0xc0785000   ( 280 kB)
>      .data : 0xc0621f7d - 0xc0739544   (1117 kB)
>      .text : 0xc0400000 - 0xc0621f7d   (2183 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 3991.02 BogoMIPS (lpj=1995511)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU: After all inits, caps: 078bf3ff e1d3fbff 00000000 00000410 00000000 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 0a
>Total of 1 processors activated (3991.02 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>..MP-BIOS bug: 8254 timer not connected to IO-APIC
>...trying to set up timer (IRQ0) through the 8259A ...  failed.
>...trying to set up timer as Virtual Wire IRQ... works.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=1552 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 23:48:24  Date: 03/13/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Transparent bridge - 0000:00:14.4
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  CF, should be C0 [20070126]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>Time: tsc clocksource has been installed.
>pnp: 00:09: iomem range 0xfff80000-0xffffffff could not be reserved
>pnp: 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
>pnp: 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
>pnp: 00:0c: ioport range 0x600-0x60f has been reserved
>pnp: 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
>pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:0e: iomem range 0xc0000-0xcffff could not be reserved
>pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:0e: iomem range 0x100000-0x3fffffff could not be reserved
>PCI: Bridge: 0000:00:02.0
>  IO window: disabled.
>  MEM window: fa700000-fe7fffff
>  PREFETCH window: bff00000-dfefffff
>PCI: Bridge: 0000:00:14.4
>  IO window: 8000-8fff
>  MEM window: fe800000-fe8fffff
>  PREFETCH window: 50000000-500fffff
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2907k freed
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1205452106.589:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 230FF4508E76ABC1
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: MSI quirk detected. MSI deactivated.
>Boot video device is 0000:01:00.0
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: duty_cycle spans bit 4
>ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not present [20070126]
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (1 cpu cores) (version 2.00.00)
>powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x2
>powernow-k8:    1 : fid 0xa (1800 MHz), vid 0x6
>powernow-k8:    2 : fid 0x8 (1600 MHz), vid 0xa
>powernow-k8:    3 : fid 0x0 (800 MHz), vid 0x12
>Using IPI No-Shortcut mode
>  Magic number: 0:187:858
>Freeing unused kernel memory: 280k freed
>Write protecting the kernel read-only data: 849k
>ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 16
>ehci_hcd 0000:00:13.2: EHCI Host Controller
>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:13.2: irq 16, io mem 0xfebfc000
>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 16
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.0: irq 16, io mem 0xfebfe000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 4 ports detected
>hub 1-0:1.0: over-current change on port 5
>ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 16
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:13.1: irq 16, io mem 0xfebfd000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 4 ports detected
>hub 1-0:1.0: over-current change on port 6
>USB Universal Host Controller Interface driver v3.0
>SCSI subsystem initialized
>libata version 2.21 loaded.
>sata_sil 0000:00:11.0: version 2.3
>ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 23 (level, low) -> IRQ 17
>scsi0 : sata_sil
>scsi1 : sata_sil
>ata1: SATA max UDMA/100 cmd 0xf8830c80 ctl 0xf8830c8a bmdma 0xf8830c00 irq 17
>ata2: SATA max UDMA/100 cmd 0xf8830cc0 ctl 0xf8830cca bmdma 0xf8830c08 irq 17
>usb 1-7: new high speed USB device using ehci_hcd and address 3
>usb 1-7: configuration #1 chosen from 1 choice
>ata1: SATA link down (SStatus 0 SControl 310)
>usb 3-2: new low speed USB device using ohci_hcd and address 2
>ata2: SATA link down (SStatus 0 SControl 310)
>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 18
>scsi2 : sata_sil
>scsi3 : sata_sil
>ata3: SATA max UDMA/100 cmd 0xf8832880 ctl 0xf883288a bmdma 0xf8832800 irq 18
>ata4: SATA max UDMA/100 cmd 0xf88328c0 ctl 0xf88328ca bmdma 0xf8832808 irq 18
>usb 3-2: configuration #1 chosen from 1 choice
>input: B16_b_02 USB-PS/2 Optical Mouse as /class/input/input2
>input: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:13.1-2
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: ATA-7: ST3808110AS, 3.AAH, max UDMA/133
>ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata3.00: configured for UDMA/100
>ata4: SATA link down (SStatus 0 SControl 310)
>scsi 2:0:0:0: Direct-Access     ATA      ST3808110AS      3.AA PQ: 0 ANSI: 5
>sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 2:0:0:0: [sda] Attached SCSI disk
>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:14.1 to 64
>scsi4 : pata_atiixp
>scsi5 : pata_atiixp
>ata5: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ff00 irq 14
>ata6: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ff08 irq 15
>ata5.00: ATAPI: _NEC DVD_RW ND-3520A, 1.04, max UDMA/33
>ata5.00: configured for UDMA/33
>ata6.00: ATA-7: Maxtor 6L300R0, BAH41G10, max UDMA/133
>ata6.00: 586114704 sectors, multi 16: LBA48 
>ata6.00: configured for UDMA/100
>scsi 4:0:0:0: CD-ROM            _NEC     DVD_RW ND-3520A  1.04 PQ: 0 ANSI: 5
>scsi 5:0:0:0: Direct-Access     ATA      Maxtor 6L300R0   BAH4 PQ: 0 ANSI: 5
>sd 5:0:0:0: [sdb] 586114704 512-byte hardware sectors (300091 MB)
>sd 5:0:0:0: [sdb] Write Protect is off
>sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 5:0:0:0: [sdb] 586114704 512-byte hardware sectors (300091 MB)
>sd 5:0:0:0: [sdb] Write Protect is off
>sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 5:0:0:0: [sdb] Attached SCSI disk
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1205452116.035:2): selinux=0 auid=4294967295
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>sd 2:0:0:0: Attached scsi generic sg0 type 0
>scsi 4:0:0:0: Attached scsi generic sg1 type 5
>sd 5:0:0:0: Attached scsi generic sg2 type 0
>sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>parport_pc 00:08: reported by Plug and Play ACPI
>parport0: PC-style at 0x3bc, irq 7 [PCSPP]
>Initializing USB Mass Storage driver...
>scsi6 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input4
>ACPI: Power Button (CM) [PWRB]
>piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
>ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 22 (level, low) -> IRQ 18
>snd-ca0106: Model 100a Rev 00000000 Serial 100a1102
>8139too Fast Ethernet driver 0.9.28
>ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 22 (level, low) -> IRQ 18
>firewire_ohci: Added fw-ohci device 0000:02:04.0, OHCI version 1.10
>ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 23 (level, low) -> IRQ 17
>eth0: RealTek RTL8139 at 0xf892ec00, 00:13:d3:ad:83:d6, IRQ 17
>eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>usbcore: registered new interface driver snd-usb-audio
>ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 20
>firewire_core: created new fw device fw0 (0 config rom retries, S400)
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 22
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>usb-storage: device scan complete
>scsi 6:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
>scsi 6:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
>scsi 6:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
>scsi 6:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
>sd 6:0:0:0: [sdc] Attached SCSI removable disk
>sd 6:0:0:0: Attached scsi generic sg3 type 0
>sd 6:0:0:1: [sdd] Attached SCSI removable disk
>sd 6:0:0:1: Attached scsi generic sg4 type 0
>sd 6:0:0:2: [sde] Attached SCSI removable disk
>sd 6:0:0:2: Attached scsi generic sg5 type 0
>sd 6:0:0:3: [sdf] Attached SCSI removable disk
>sd 6:0:0:3: Attached scsi generic sg6 type 0
>EXT3 FS on sda1, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2072376k swap on /dev/sda2.  Priority:-1 extents:1 across:2072376k
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>Marking TSC unstable due to: cpufreq changes.
>Time: acpi_pm clocksource has been installed.
>Clocksource tsc unstable (delta = -299984067 ns)
>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>fuse init (API version 7.8)
>audit(1205452137.232:3): audit_pid=1935 old=0 by auid=4294967295
>eth0: no IPv6 routers present
>

Actions: View

Attachments on bug 437163: 297824 | 298001