Attachment 298323 Details for Bug 437903 – wpa_supplicant log

wpa_supplicant log

wpa.log (text/plain), 11.89 KB, created by Bill Nottingham on 2008-03-18 01:35:22 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Bill Nottingham

Created: 2008-03-18 01:35:22 UTC

Size: 11.89 KB

patch

obsolete

># wpa_supplicant -d -d -Dwext -iwlan0 -c /etc/wpa_supplicant/foo.conf
>Initializing interface 'wlan0' conf '/etc/wpa_supplicant/foo.conf' driver 'wext' ctrl_interface 'N/A' bridge 'N/A'
>Configuration file '/etc/wpa_supplicant/foo.conf' -> '/etc/wpa_supplicant/foo.conf'
>Reading configuration file '/etc/wpa_supplicant/foo.conf'
>ctrl_interface='/var/run/wpa_supplicant'
>ctrl_interface_group='wheel' (DEPRECATED)
>Line: 3 - start of a new network block
>ssid - hexdump_ascii(len=9):
>     78 65 6e 6f 6d 6f 72 70 68                        xenomorph       
>scan_ssid=1 (0x1)
>key_mgmt: 0x2
>PSK (ASCII passphrase) - hexdump_ascii(len=56): [REMOVED]
>PSK (from passphrase) - hexdump(len=32): [REMOVED]
>Priority group 0
>   id=0 ssid='xenomorph'
>Initializing interface (2) 'wlan0'
>Interface wlan0 set UP - waiting a second for the driver to complete initialization
>SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf
>  capabilities: key_mgmt 0xf enc 0xf
>WEXT: Operstate: linkmode=1, operstate=5
>Own MAC address: 00:1b:77:2f:c6:7a
>wpa_driver_wext_set_wpa
>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>ioctl[SIOCSIWENCODEEXT]: No such file or directory
>Driver did not support SIOCSIWENCODEEXT
>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>ioctl[SIOCSIWENCODEEXT]: No such file or directory
>Driver did not support SIOCSIWENCODEEXT
>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>ioctl[SIOCSIWENCODEEXT]: No such file or directory
>Driver did not support SIOCSIWENCODEEXT
>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>ioctl[SIOCSIWENCODEEXT]: No such file or directory
>Driver did not support SIOCSIWENCODEEXT
>wpa_driver_wext_set_countermeasures
>ioctl[SIOCSIWAUTH]: Operation not supported
>WEXT auth param 4 value 0x0 - wpa_driver_wext_set_drop_unencrypted
>RSN: flushing PMKID list in the driver
>Setting scan request: 0 sec 100000 usec
>EAPOL: SUPP_PAE entering state DISCONNECTED
>EAPOL: KEY_RX entering state NO_KEY_RECEIVE
>EAPOL: SUPP_BE entering state INITIALIZE
>EAP: EAP entering state DISABLED
>ctrl_interface_group=10 (from group name 'wheel')
>Added interface wlan0
>Ignore event for foreign ifindex 3
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b06 len=12
>State: DISCONNECTED -> SCANNING
>Starting AP scan (specific SSID)
>Scan SSID - hexdump_ascii(len=9):
>     78 65 6e 6f 6d 6f 72 70 68                        xenomorph       
>Trying to get current scan results first without requesting a new scan to speed up initial association
>Received 268 bytes of scan results (1 BSSes)
>CTRL-EVENT-SCAN-RESULTS 
>Selecting BSS from priority group 0
>Try to find WPA-enabled AP
>0: 00:14:bf:ea:e4:94 ssid='linksys_SES_7619' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
>   skip - no WPA/RSN IE
>Try to find non-WPA AP
>0: 00:14:bf:ea:e4:94 ssid='linksys_SES_7619' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
>   skip - SSID mismatch
>No suitable AP found.
>Setting scan request: 0 sec 0 usec
>Starting AP scan (broadcast SSID)
>Scan requested (ret=0) - scan timeout 5 seconds
>EAPOL: disable timer tick
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b19 len=16
>Received 2442 bytes of scan results (9 BSSes)
>CTRL-EVENT-SCAN-RESULTS 
>Selecting BSS from priority group 0
>Try to find WPA-enabled AP
>0: 00:13:10:a6:40:59 ssid='xenomorph' wpa_ie_len=22 rsn_ie_len=0 caps=0x11
>   selected based on WPA IE
>   selected WPA AP 00:13:10:a6:40:59 ssid='xenomorph'
>Try to find non-WPA AP
>Trying to associate with 00:13:10:a6:40:59 (SSID='xenomorph' freq=2457 MHz)
>Cancelling scan request
>WPA: clearing own WPA/RSN IE
>Automatic auth_alg selection: 0x1
>WPA: using IEEE 802.11i/D3.0
>WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2 proto 1
>WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
>WPA: clearing AP RSN IE
>WPA: using GTK TKIP
>WPA: using PTK TKIP
>WPA: using KEY_MGMT WPA-PSK
>WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
>No keys have been configured - skip key clearing
>wpa_driver_wext_set_drop_unencrypted
>State: SCANNING -> ASSOCIATING
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>wpa_driver_wext_associate
>Setting authentication timeout: 15 sec 0 usec
>EAPOL: External notification - EAP success=0
>EAPOL: External notification - EAP fail=0
>EAPOL: External notification - portControl=Auto
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b06 len=12
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b04 len=16
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b1a len=25
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b19 len=16
>Received 2442 bytes of scan results (9 BSSes)
>CTRL-EVENT-SCAN-RESULTS 
>Selecting BSS from priority group 0
>Try to find WPA-enabled AP
>0: 00:13:10:a6:40:59 ssid='xenomorph' wpa_ie_len=22 rsn_ie_len=0 caps=0x11
>   selected based on WPA IE
>   selected WPA AP 00:13:10:a6:40:59 ssid='xenomorph'
>Try to find non-WPA AP
>Already associated with the selected AP.
>Authentication with 00:13:10:a6:40:59 timed out.
>Added BSSID 00:13:10:a6:40:59 into blacklist
>No keys have been configured - skip key clearing
>State: ASSOCIATING -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - EAP success=0
>Setting scan request: 0 sec 0 usec
>State: DISCONNECTED -> SCANNING
>Starting AP scan (specific SSID)
>Scan SSID - hexdump_ascii(len=9):
>     78 65 6e 6f 6d 6f 72 70 68                        xenomorph       
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b19 len=16
>Received 301 bytes of scan results (1 BSSes)
>CTRL-EVENT-SCAN-RESULTS 
>Selecting BSS from priority group 0
>Try to find WPA-enabled AP
>0: 00:13:10:a6:40:59 ssid='xenomorph' wpa_ie_len=22 rsn_ie_len=0 caps=0x11
>   selected based on WPA IE
>   selected WPA AP 00:13:10:a6:40:59 ssid='xenomorph'
>Try to find non-WPA AP
>Trying to associate with 00:13:10:a6:40:59 (SSID='xenomorph' freq=2457 MHz)
>Cancelling scan request
>WPA: clearing own WPA/RSN IE
>Automatic auth_alg selection: 0x1
>WPA: using IEEE 802.11i/D3.0
>WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2 proto 1
>WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
>WPA: clearing AP RSN IE
>WPA: using GTK TKIP
>WPA: using PTK TKIP
>WPA: using KEY_MGMT WPA-PSK
>WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
>No keys have been configured - skip key clearing
>wpa_driver_wext_set_drop_unencrypted
>State: SCANNING -> ASSOCIATING
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>wpa_driver_wext_associate
>Setting authentication timeout: 15 sec 0 usec
>EAPOL: External notification - EAP success=0
>EAPOL: External notification - EAP fail=0
>EAPOL: External notification - portControl=Auto
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b06 len=12
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b04 len=16
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b1a len=25
>Authentication with 00:13:10:a6:40:59 timed out.
>BSSID 00:13:10:a6:40:59 blacklist count incremented to 2
>No keys have been configured - skip key clearing
>State: ASSOCIATING -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - EAP success=0
>Setting scan request: 0 sec 0 usec
>State: DISCONNECTED -> SCANNING
>Starting AP scan (broadcast SSID)
>Scan requested (ret=0) - scan timeout 30 seconds
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b19 len=16
>Received 2178 bytes of scan results (8 BSSes)
>CTRL-EVENT-SCAN-RESULTS 
>Selecting BSS from priority group 0
>Try to find WPA-enabled AP
>0: 00:13:10:a6:40:59 ssid='xenomorph' wpa_ie_len=22 rsn_ie_len=0 caps=0x11
>   skip - blacklisted
>1: 00:19:e3:fa:f3:6c ssid='The Home Network' wpa_ie_len=22 rsn_ie_len=24 caps=0x11
>   skip - SSID mismatch
>2: 00:14:f1:61:44:80 ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
>   skip - no WPA/RSN IE
>3: 00:12:17:c0:29:8c ssid='3702' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
>   skip - no WPA/RSN IE
>4: 00:11:50:67:6f:3a ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
>   skip - no WPA/RSN IE
>5: 00:0f:66:a4:0c:0c ssid='NRFMLY_NETWORK' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
>   skip - no WPA/RSN IE
>6: 00:00:00:00:00:00 ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x0
>   skip - no WPA/RSN IE
>7: 00:14:bf:ea:e4:94 ssid='linksys_SES_7619' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
>   skip - no WPA/RSN IE
>Try to find non-WPA AP
>0: 00:13:10:a6:40:59 ssid='xenomorph' wpa_ie_len=22 rsn_ie_len=0 caps=0x11
>   skip - blacklisted
>1: 00:19:e3:fa:f3:6c ssid='The Home Network' wpa_ie_len=22 rsn_ie_len=24 caps=0x11
>   skip - SSID mismatch
>2: 00:14:f1:61:44:80 ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
>   skip - SSID mismatch
>3: 00:12:17:c0:29:8c ssid='3702' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
>   skip - SSID mismatch
>4: 00:11:50:67:6f:3a ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
>   skip - SSID mismatch
>5: 00:0f:66:a4:0c:0c ssid='NRFMLY_NETWORK' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
>   skip - SSID mismatch
>6: 00:00:00:00:00:00 ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x0
>   skip - SSID mismatch
>7: 00:14:bf:ea:e4:94 ssid='linksys_SES_7619' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
>   skip - SSID mismatch
>No APs found - clear blacklist and try again
>Removed BSSID 00:13:10:a6:40:59 from blacklist (clear)
>Selecting BSS from priority group 0
>Try to find WPA-enabled AP
>0: 00:13:10:a6:40:59 ssid='xenomorph' wpa_ie_len=22 rsn_ie_len=0 caps=0x11
>   selected based on WPA IE
>   selected WPA AP 00:13:10:a6:40:59 ssid='xenomorph'
>Try to find non-WPA AP
>Trying to associate with 00:13:10:a6:40:59 (SSID='xenomorph' freq=2457 MHz)
>Cancelling scan request
>WPA: clearing own WPA/RSN IE
>Automatic auth_alg selection: 0x1
>WPA: using IEEE 802.11i/D3.0
>WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2 proto 1
>WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
>WPA: clearing AP RSN IE
>WPA: using GTK TKIP
>WPA: using PTK TKIP
>WPA: using KEY_MGMT WPA-PSK
>WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
>No keys have been configured - skip key clearing
>wpa_driver_wext_set_drop_unencrypted
>State: SCANNING -> ASSOCIATING
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>wpa_driver_wext_associate
>Setting authentication timeout: 15 sec 0 usec
>EAPOL: External notification - EAP success=0
>EAPOL: External notification - EAP fail=0
>EAPOL: External notification - portControl=Auto
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b06 len=12
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b04 len=16
>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
>Wireless event: cmd=0x8b1a len=25
>Authentication with 00:13:10:a6:40:59 timed out.
>Added BSSID 00:13:10:a6:40:59 into blacklist
>No keys have been configured - skip key clearing
>State: ASSOCIATING -> DISCONNECTED
>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
>WEXT: Operstate: linkmode=-1, operstate=5
>EAPOL: External notification - portEnabled=0
>EAPOL: External notification - portValid=0
>EAPOL: External notification - EAP success=0
>Setting scan request: 0 sec 0 usec
>State: DISCONNECTED -> SCANNING
>Starting AP scan (specific SSID)
>Scan SSID - hexdump_ascii(len=9):
>     78 65 6e 6f 6d 6f 72 70 68                        xenomorph       
>Scan requested (ret=0) - scan timeout 30 seconds
>

Actions: View

Attachments on bug 437903: 298323