Attachment 298400 Details for Bug 403651 – dmesg with options acpi=debug cpufreq.debug=7

dmesg with options acpi=debug cpufreq.debug=7

dmesg (text/plain), 38.11 KB, created by Łukasz Lis on 2008-03-18 14:42:37 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Łukasz Lis

Created: 2008-03-18 14:42:37 UTC

Size: 38.11 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.24.3-34.local.fc8 (berem@belphegor.localdomain) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Tue Mar 18 11:38:43 CET 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
> BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003f6d0000 (usable)
> BIOS-e820: 000000003f6d0000 - 000000003f6dd000 (ACPI data)
> BIOS-e820: 000000003f6dd000 - 000000003f700000 (ACPI NVS)
> BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>Malformed early option 'acpi'
>118MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f6ad0
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 259792) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   259792
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   259792
>On node 0 totalpages: 259792
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 237 pages used for memmap
>  HighMem zone: 30179 pages, LIFO batch:7
>  Movable zone: 0 pages used for memmap
>DMI present.
>Using APIC driver default
>ACPI: RSDP 000F6AA0, 0024 (r2 LENOVO)
>ACPI: XSDT 3F6D206C, 0084 (r1 LENOVO TP-7P        2100  LTP        0)
>ACPI: FACP 3F6D2200, 00F4 (r3 LENOVO TP-7P        2100 LNVO        1)
>ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126]
>ACPI: DSDT 3F6D261D, A698 (r1 LENOVO TP-7P        2100 MSFT  3000000)
>ACPI: FACS 3F6E4000, 0040
>ACPI: SSDT 3F6D23B4, 0269 (r1 LENOVO TP-7P        2100 MSFT  3000000)
>ACPI: ECDT 3F6DCCB5, 0052 (r1 LENOVO TP-7P        2100 LNVO        1)
>ACPI: APIC 3F6DCD07, 0068 (r1 LENOVO TP-7P        2100 LNVO        1)
>ACPI: MCFG 3F6DCD6F, 003C (r1 LENOVO TP-7P        2100 LNVO        1)
>ACPI: HPET 3F6DCDAB, 0038 (r1 LENOVO TP-7P        2100 LNVO        1)
>ACPI: SLIC 3F6DCE62, 0176 (r1 LENOVO TP-7P        2100  LTP        0)
>ACPI: BOOT 3F6DCFD8, 0028 (r1 LENOVO TP-7P        2100  LTP        1)
>ACPI: SSDT 3F6E2655, 025F (r1 LENOVO TP-7P        2100 INTL 20050513)
>ACPI: SSDT 3F6E28B4, 00A6 (r1 LENOVO TP-7P        2100 INTL 20050513)
>ACPI: SSDT 3F6E295A, 04F7 (r1 LENOVO TP-7P        2100 INTL 20050513)
>ACPI: SSDT 3F6E2E51, 01D8 (r1 LENOVO TP-7P        2100 INTL 20050513)
>ACPI: DMI detected: Lenovo ThinkPad R61
>ACPI: Added _OSI(Linux)
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
>swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000
>swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
>swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257763
>Kernel command line: ro root=/dev/Fedora/root rhgb quiet acpi=debug cpufreq.debug=7
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07ba000 soft=c079a000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1463.043 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1021260k/1039168k available (2238k kernel code, 17180k reserved, 1131k data, 284k init, 121664k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0750000 - 0xc0797000   ( 284 kB)
>      .data : 0xc062f8f9 - 0xc074a724   (1131 kB)
>      .text : 0xc0400000 - 0xc062f8f9   (2238 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 2930.07 BogoMIPS (lpj=1465039)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e39d 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>CPU0: Intel(R) Pentium(R) Dual  CPU  T2310  @ 1.46GHz stepping 0d
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07bb000 soft=c079b000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 2926.00 BogoMIPS (lpj=1463003)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e39d 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Pentium(R) Dual  CPU  T2310  @ 1.46GHz stepping 0d
>Total of 2 processors activated (5856.08 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]:
>Measured 370898 cycles TSC warp between CPUs, turning off TSC clock.
>Marking TSC unstable due to: check_tsc_sync_source failed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1680 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>net_namespace: 64 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 15:30:33  Date: 03/18/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 3.00 entry at 0xfde37, last bus=24
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: EC description table is found, configuring boot EC
>ACPI: BIOS _OSI(Linux) query honored via DMI
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in poll mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 1180-11bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: Power Resource [PUBS] (on)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnpacpi: exceeded the max number of mem resources. Max:12 Found:12
>pnp: PnP ACPI: found 10 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Time: hpet clocksource has been installed.
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>system 00:00: iomem range 0x0-0x9ffff could not be reserved
>system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
>system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
>system 00:00: iomem range 0xc8000-0xcbfff has been reserved
>system 00:00: iomem range 0xcc000-0xcffff has been reserved
>system 00:00: iomem range 0x0-0x0 could not be reserved
>system 00:00: iomem range 0x0-0x0 could not be reserved
>system 00:00: iomem range 0x0-0x0 could not be reserved
>system 00:00: iomem range 0x0-0x0 could not be reserved
>system 00:00: iomem range 0xe0000-0xe3fff has been reserved
>system 00:00: iomem range 0xe4000-0xe7fff has been reserved
>system 00:00: iomem range 0xe8000-0xebfff has been reserved
>system 00:02: ioport range 0x164e-0x164f has been reserved
>system 00:02: ioport range 0x1000-0x107f has been reserved
>system 00:02: ioport range 0x1180-0x11bf has been reserved
>system 00:02: ioport range 0x800-0x80f has been reserved
>system 00:02: ioport range 0x15e0-0x15ef has been reserved
>system 00:02: ioport range 0x1600-0x165f could not be reserved
>system 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved
>system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
>system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
>system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
>system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved
>system 00:02: iomem range 0xfed45000-0xfed4bfff could not be reserved
>system 00:02: iomem range 0xfed40000-0xfed44fff could not be reserved
>PCI: Bridge: 0000:00:1c.0
>  IO window: 2000-2fff
>  MEM window: fc000000-fdffffff
>  PREFETCH window: f8000000-f80fffff
>PCI: Bridge: 0000:00:1c.1
>  IO window: 3000-3fff
>  MEM window: dc100000-dfcfffff
>  PREFETCH window: dfe00000-dfefffff
>PCI: Bridge: 0000:00:1c.2
>  IO window: disabled.
>  MEM window: fe000000-fe0fffff
>  PREFETCH window: disabled.
>PCI: Bus 22, cardbus bridge: 0000:15:00.0
>  IO window: 00004000-000040ff
>  IO window: 00004400-000044ff
>  PREFETCH window: f4000000-f7ffffff
>  MEM window: 50000000-53ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 4000-7fff
>  MEM window: f8300000-fbffffff
>  PREFETCH window: f4000000-f7ffffff
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PCI: Enabling device 0000:00:1e.0 (0005 -> 0007)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:15:00.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3656k freed
>Simple Boot Flag at 0x35 set to 0x1
>speedstep-lib: x86: 6, model: f
>speedstep-ich: Intel(R) SpeedStep(TM) capable processor not found
>speedstep-lib: x86: 6, model: f
>speedstep-smi: No supported Intel CPU detected.
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1205854233.677:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 5F7D62A05A7B9D6
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: SSDT 3F6E1B32, 0240 (r1  PmRef  Cpu0Ist      100 INTL 20050513)
>ACPI: SSDT 3F6E1DF7, 085E (r1  PmRef  Cpu0Cst      100 INTL 20050513)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 3F6E1A6A, 00C8 (r1  PmRef  Cpu1Ist      100 INTL 20050513)
>ACPI: SSDT 3F6E1D72, 0085 (r1  PmRef  Cpu1Cst      100 INTL 20050513)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Thermal Zone [THM0] (38 C)
>ACPI: Thermal Zone [THM1] (36 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected an Intel 965GM Chipset.
>agpgart: Detected 7676K stolen memory.
>agpgart: AGP aperture is 256M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>Yenta: CardBus bridge found at 0000:15:00.0 [17aa:20c4]
>Yenta: ISA IRQ mask 0x0cb8, PCI irq 19
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0x4000 - 0x7fff
>cs: IO port probe 0x4000-0x7fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xf8300000 - 0xfbffffff
>pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>cpuidle: using governor ladder
>IBM TrackPoint firmware: 0x0e, buttons: 3/3
>input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input2
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 0:402:538
>Freeing unused kernel memory: 284k freed
>Write protecting the kernel read-only data: 893k
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe304800
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfe304c00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 17, io base 0x00001840
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001860
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001880
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.2: irq 22, io base 0x000018a0
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>usb 5-1: new low speed USB device using uhci_hcd and address 2
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ahci 0000:00:1f.2: version 3.0
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 19
>ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x1) don't match, using nr_ports
>ahci 0000:00:1f.2: forcing PORTS_IMPL to 0x7
>usb 5-1: configuration #1 chosen from 1 choice
>input: HID 046a:0011 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input3
>input,hidraw0: USB HID v1.10 Keyboard [HID 046a:0011] on usb-0000:00:1d.0-1
>usb 5-2: new low speed USB device using uhci_hcd and address 3
>usb 5-2: configuration #1 chosen from 1 choice
>input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input4
>input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-2
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x7 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part 
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xfe304000 port 0xfe304100 irq 220
>ata2: SATA max UDMA/133 abar m2048@0xfe304000 port 0xfe304180 irq 220
>ata3: SATA max UDMA/133 abar m2048@0xfe304000 port 0xfe304200 irq 220
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: WDC WD1200BEVS-08RST2, 08.01G08, max UDMA/133
>ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/133
>ata2: SATA link down (SStatus 0 SControl 0)
>ata3: SATA link down (SStatus 0 SControl 0)
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD1200BEVS-0 08.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4
>sd 0:0:0:0: [sda] Attached SCSI disk
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi3 : ata_piix
>scsi4 : ata_piix
>ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
>ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
>ata4.00: ATAPI: MATSHITADVD-RAM UJ-860, RB01, max UDMA/33
>ata4.00: configured for UDMA/33
>ata5: port disabled. ignoring.
>scsi 3:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-860   RB01 PQ: 0 ANSI: 5
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1205854245.173:2): enforcing=1 old_enforcing=0 auid=4294967295
>SELinux:8192 avtab hash slots allocated.Num of rules:217677
>SELinux:8192 avtab hash slots allocated.Num of rules:217677
>security:  8 users, 12 roles, 2372 types, 114 bools, 1 sens, 1024 cats
>security:  67 classes, 217677 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>audit(1205854245.558:3): policy loaded auid=4294967295
>Clocksource tsc unstable (delta = -121546420 ns)
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 3:0:0:0: Attached scsi generic sg1 type 5
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 3:0:0:0: Attached scsi CD-ROM sr0
>tg3.c:v3.86 (November 9, 2007)
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>input: Power Button (FF) as /devices/virtual/input/input5
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /devices/virtual/input/input6
>ACPI: Lid Switch [LID]
>input: Sleep Button (CM) as /devices/virtual/input/input7
>ACPI: Sleep Button (CM) [SLPB]
>input: PC Speaker as /devices/platform/pcspkr/input/input8
>thinkpad_acpi: ThinkPad ACPI Extras v0.17
>thinkpad_acpi: http://ibm-acpi.sf.net/
>thinkpad_acpi: ThinkPad BIOS 7PETB0WW (2.10 ), EC 7KHT24WW-1.08
>thinkpad_acpi: Lenovo ThinkPad R61e
>eth0: Tigon3 [partno(none) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:15:58:cd:0c:8b
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>thinkpad_acpi: radio switch found; radios are enabled
>thinkpad_acpi: standard ACPI backlight interface available, not loading native one...
>input: ThinkPad Extra Buttons as /devices/virtual/input/input9
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input10
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 23
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26kds
>iwl3945: Copyright(c) 2003-2008 Intel Corporation
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>iwl3945: Detected Intel Wireless WiFi Link 3945ABG
>iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
>ACPI: AC Adapter [AC] (on-line)
>phy0: Selected rate control algorithm 'iwl-3945-rs'
>ACPI: Battery Slot [BAT0] (battery absent)
>ACPI: PCI interrupt for device 0000:03:00.0 disabled
>ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 21
>hda_intel: probe_mask set to 0x1 for device 17aa:20ac
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ALSA sound/pci/hda/hda_intel.c:732: codec_mask = 0x1
>thinkpad_ec: thinkpad_ec 0.36 loaded.
>tp_smapi 0.36 loading...
>tp_smapi successfully loaded (smapi_port=0xb2).
>hdaps: initial mode latch is 0x05
>hdaps: setting ec_rate=250, filter_order=2
>hdaps: fake_data_mode set to 0
>hdaps: device successfully initialized.
>input: ThinkPad HDAPS joystick emulation as /devices/platform/hdaps/input/input11
>input: ThinkPad HDAPS accelerometer data as /devices/platform/hdaps/input/input12
>hdaps: driver successfully loaded.
>smapi smapi: smapi_request: req_in: BX=2116 CX=100 DI=0 SI=0
>smapi smapi: smapi_request: req_out: AX=80 BX=2116 CX=327 DX=b2 DI=0 SI=0 r=0
>smapi smapi: smapi_request: req_in: BX=211a CX=100 DI=0 SI=0
>smapi smapi: smapi_request: req_out: AX=80 BX=211a CX=346 DX=b2 DI=0 SI=0 r=0
>smapi smapi: smapi_request: req_in: BX=211a CX=100 DI=0 SI=0
>smapi smapi: smapi_request: req_out: AX=80 BX=211a CX=346 DX=b2 DI=0 SI=0 r=0
>smapi smapi: smapi_request: req_in: BX=211b CX=146 DI=0 SI=0
>smapi smapi: smapi_request: req_out: AX=80 BX=211b CX=146 DX=b2 DI=0 SI=0 r=0
>smapi smapi: set_real_thresh: set stop to 70 for bat=0
>smapi smapi: smapi_request: req_in: BX=211a CX=100 DI=0 SI=0
>smapi smapi: smapi_request: req_out: AX=80 BX=211a CX=346 DX=b2 DI=0 SI=0 r=0
>smapi smapi: smapi_request: req_in: BX=2116 CX=100 DI=0 SI=0
>smapi smapi: smapi_request: req_out: AX=80 BX=2116 CX=327 DX=b2 DI=0 SI=0 r=0
>smapi smapi: smapi_request: req_in: BX=2116 CX=100 DI=0 SI=0
>smapi smapi: smapi_request: req_out: AX=80 BX=2116 CX=327 DX=b2 DI=0 SI=0 r=0
>smapi smapi: smapi_request: req_in: BX=2117 CX=127 DI=0 SI=0
>smapi smapi: smapi_request: req_out: AX=80 BX=2117 CX=127 DX=b2 DI=0 SI=0 r=0
>smapi smapi: set_real_thresh: set start to 39 for bat=0
>smapi smapi: smapi_request: req_in: BX=2114 CX=100 DI=0 SI=0
>smapi smapi: smapi_request: req_out: AX=80 BX=2114 CX=700 DX=b2 DI=0 SI=f r=0
>smapi smapi: smapi_request: req_in: BX=2115 CX=101 DI=0 SI=f
>smapi smapi: smapi_request: req_out: AX=80 BX=2115 CX=101 DX=b2 DI=0 SI=f r=0
>smapi smapi: set_inhibit_charge_minutes: set to 15 for bat=0
>
>padlock: VIA PadLock Hash Engine not detected.
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>fuse init (API version 7.9)
>SELinux: initialized (dev sda1, type fuseblk), uses genfs_contexts
>audit(1205850659.654:4): avc:  denied  { write } for  pid=1584 comm="mount.ntfs" name="tmp" dev=dm-0 ino=294913 scontext=system_u:system_r:mount_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir
>SELinux: initialized (dev sda3, type fuseblk), uses genfs_contexts
>audit(1205850659.770:5): avc:  denied  { write } for  pid=1586 comm="mount.ntfs" name="tmp" dev=dm-0 ino=294913 scontext=system_u:system_r:mount_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda2, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-3, type ext3), uses xattr
>Adding 2064376k swap on /dev/mapper/swap.  Priority:-1 extents:1 across:2064376k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>warning: process `kudzu' used the deprecated sysctl system call with 1.23.
>acpi-cpufreq: acpi_cpufreq_init
>acpi-cpufreq: acpi_cpufreq_early_init
>cpufreq-core: trying to register driver acpi-cpufreq
>cpufreq-core: adding CPU 0
>acpi-cpufreq: acpi_cpufreq_cpu_init
>acpi-cpufreq: HARDWARE addr space
>freq-table: table entry 0: 1467000 kHz, 0 index
>freq-table: table entry 1: 1067000 kHz, 1 index
>freq-table: table entry 2: 800000 kHz, 2 index
>acpi-cpufreq: get_cur_freq_on_cpu (0)
>acpi-cpufreq: get_cur_val = 100666155
>acpi-cpufreq: cur freq = 1467000
>acpi-cpufreq: CPU0 - ACPI performance management activated.
>acpi-cpufreq:      *P0: 1467 MHz, 35000 mW, 10 uS
>acpi-cpufreq:       P1: 1067 MHz, 23000 mW, 10 uS
>acpi-cpufreq:       P2: 800 MHz, 16000 mW, 10 uS
>freq-table: setting show_table for cpu 0 to f699f840
>cpufreq-core: CPU 1 already managed, adding link
>cpufreq-core: setting new policy for CPU 0: 800000 - 1467000 kHz
>acpi-cpufreq: acpi_cpufreq_verify
>freq-table: request for verification of policy (800000 - 1467000 kHz) for cpu 0
>freq-table: verification lead to (800000 - 1467000 kHz) for cpu 0
>acpi-cpufreq: acpi_cpufreq_verify
>freq-table: request for verification of policy (800000 - 800000 kHz) for cpu 0
>freq-table: verification lead to (800000 - 800000 kHz) for cpu 0
>cpufreq-core: new min and max freqs are 800000 - 800000 kHz
>cpufreq-core: governor switch
>cpufreq-core: __cpufreq_governor for CPU 0, event 1
>userspace: managing cpu 0 started (800000 - 800000 kHz, currently 1467000 kHz)
>cpufreq-core: governor: change or update limits
>cpufreq-core: __cpufreq_governor for CPU 0, event 3
>userspace: limit event for cpu 0: 800000 - 800000 kHz,currently 1467000 kHz, last set to 1467000 kHz
>cpufreq-core: target for CPU 0: 800000 kHz, relation 1
>acpi-cpufreq: acpi_cpufreq_target 800000 (0)
>freq-table: request for target 800000 kHz (relation: 1) for cpu 0
>freq-table: target is 2 (800000 kHz, 2)
>cpufreq-core: notification 0 of frequency transition to 800000 kHz
>userspace: saving cpu_cur_freq of cpu 0 to be 800000 kHz
>cpufreq-core: notification 0 of frequency transition to 800000 kHz
>cpufreq-core: notification 1 of frequency transition to 800000 kHz
>userspace: saving cpu_cur_freq of cpu 0 to be 800000 kHz
>cpufreq-core: notification 1 of frequency transition to 800000 kHz
>cpufreq-core: initialization complete
>cpufreq-core: adding CPU 1
>cpufreq-core: driver acpi-cpufreq up and running
>cpufreq-core: setting new policy for CPU 0: 800000 - 800000 kHz
>acpi-cpufreq: acpi_cpufreq_verify
>freq-table: request for verification of policy (800000 - 800000 kHz) for cpu 0
>freq-table: verification lead to (800000 - 800000 kHz) for cpu 0
>acpi-cpufreq: acpi_cpufreq_verify
>freq-table: request for verification of policy (800000 - 800000 kHz) for cpu 0
>freq-table: verification lead to (800000 - 800000 kHz) for cpu 0
>cpufreq-core: new min and max freqs are 800000 - 800000 kHz
>cpufreq-core: governor switch
>cpufreq-core: __cpufreq_governor for CPU 0, event 2
>userspace: managing cpu 0 stopped
>cpufreq-core: __cpufreq_governor for CPU 0, event 1
>cpufreq-core: governor: change or update limits
>cpufreq-core: __cpufreq_governor for CPU 0, event 3
>cpufreq-core: setting new policy for CPU 0: 800000 - 800000 kHz
>acpi-cpufreq: acpi_cpufreq_verify
>freq-table: request for verification of policy (800000 - 800000 kHz) for cpu 0
>freq-table: verification lead to (800000 - 800000 kHz) for cpu 0
>acpi-cpufreq: acpi_cpufreq_verify
>freq-table: request for verification of policy (800000 - 800000 kHz) for cpu 0
>freq-table: verification lead to (800000 - 800000 kHz) for cpu 0
>cpufreq-core: new min and max freqs are 800000 - 800000 kHz
>cpufreq-core: governor: change or update limits
>cpufreq-core: __cpufreq_governor for CPU 0, event 3
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>SELinux: initialized (dev sda1, type fuseblk), uses genfs_contexts
>SELinux: initialized (dev sda3, type fuseblk), uses genfs_contexts
>audit(1205850668.169:6): audit_pid=2131 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 21
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:0e:8e:0a:65:94
>wlan0: authenticate with AP 00:0e:8e:0a:65:94
>wlan0: authenticate with AP 00:0e:8e:0a:65:94
>wlan0: authentication with AP 00:0e:8e:0a:65:94 timed out
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 19
>[drm] Initialized drm 1.1.0 20060810
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>cpufreq-core: setting new policy for CPU 0: 800000 - 800000 kHz
>acpi-cpufreq: acpi_cpufreq_verify
>freq-table: request for verification of policy (800000 - 800000 kHz) for cpu 0
>freq-table: verification lead to (800000 - 800000 kHz) for cpu 0
>acpi-cpufreq: acpi_cpufreq_verify
>freq-table: request for verification of policy (800000 - 800000 kHz) for cpu 0
>freq-table: verification lead to (800000 - 800000 kHz) for cpu 0
>cpufreq-core: new min and max freqs are 800000 - 800000 kHz
>cpufreq-core: governor: change or update limits
>cpufreq-core: __cpufreq_governor for CPU 0, event 3
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:1b:11:9b:79:b2
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:1b:11:9b:79:b2
>wlan0: RX authentication from 00:1b:11:9b:79:b2 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:1b:11:9b:79:b2
>wlan0: authentication frame received from 00:1b:11:9b:79:b2, but not in authenticate state - ignored
>wlan0: RX AssocResp from 00:1b:11:9b:79:b2 (capab=0x431 status=0 aid=1)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: no IPv6 routers present
>wlan0: CTS protection enabled (BSSID=00:1b:11:9b:79:b2)
>wlan0: CTS protection disabled (BSSID=00:1b:11:9b:79:b2)
>wlan0: CTS protection enabled (BSSID=00:1b:11:9b:79:b2)
>wlan0: CTS protection disabled (BSSID=00:1b:11:9b:79:b2)

Actions: View

Attachments on bug 403651: 271951 | 271961 | 271971 | 274581 | 289802 | 298400 | 346232 | 346233 | 346234 | 346235 | 346236