Attachment 298402 Details for Bug 436426 – capture kernel console output

capture kernel console output

hp-olympia1 (text/plain), 22.72 KB, created by Qian Cai on 2008-03-18 14:56:30 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Qian Cai

Created: 2008-03-18 14:56:30 UTC

Size: 22.72 KB

patch

obsolete

>[root@hp-olympia1 ~]# echo  c >/proc/ysrq^G^H^[[K^H^[[K^H^[[K^H^[[Ksysrq-trigger ^M
>SysRq : Trigger a crashdump^M
>Linux version 2.6.18-84.el5 (brewbuilder@ia64-1.build.redhat.com) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-39)) #1 SMP Fri Feb 29 16:27:31 EST 2008^M
>Ignoring memory below 128MB^M
>Ignoring memory above 640MB^M
>EFI v1.10 by HP: SALsystab=0x70fff7f86c8 ACPI 2.0=0x70fffbc0000 HCDP=0x70fffc072f0 SMBIOS=0x7fffe000^M
>booting generic kernel on platform dig^M
>PCDP: v3 at 0x70fffc072f0^M
>Early serial console at MMIO 0xf0000018000 (options '9600n8')^M
>Number of logical nodes in system = 4^M
>Number of memory chunks in system = 8^M
>rsvd_region[0]: [0xe000000008000000, 0xe000000008db2170)^M
>rsvd_region[1]: [0xe000000008dc0000, 0xe000000008dc0030)^M
>rsvd_region[2]: [0xe000000027a2c000, 0xe000000027fbd8ff)^M
>rsvd_region[3]: [0xe000000027fc4000, 0xe000000027fc40af)^M
>rsvd_region[4]: [0xe000000027fcc000, 0xe000000027fccea0)^M
>rsvd_region[5]: [0xe000000027fd4000, 0xe000000027fd4050)^M
>rsvd_region[6]: [0xffffffffffffffff, 0xffffffffffffffff)^M
>Initial ramdisk at: 0xe000000027a2c000 (5839103 bytes)^M
>SAL 3.2: HP Orca/IPF version 3.66^M
>SAL Platform features: None^M
>SAL: AP wakeup using external interrupt vector 0xff^M
>No logical to physical processor mapping available^M
>ACPI: Local APIC address c0000000fee00000^M
>GSI 16 (level, low) -> CPU 0 (0x0c02) vector 48^M
>9 CPUs available, 9 CPUs total^M
>MCA related initialization done^M
>SMP: Allowing 9 CPUs, 0 hotplug CPUs^M
>Built 4 zonelists.  Total pages: 31530^M
>Kernel command line: BOOT_IMAGE=scsi0:EFI\redhat\vmlinuz-2.6.18-84.el5 root=/dev/VolGroup00/LogVol00  ro irqpoll maxcpus=1 reset_devices machvec=dig elfcorehdr=655248K max_addr=640M min_addr=128M^M
>Misrouted IRQ fixup and polling support enabled^M
>This may significantly impact system performance^M
>PID hash table entries: 2048 (order: 11, 16384 bytes)^M
>Console: colour dummy device 80x25^M
>Placing software IO TLB between 0x11370000 - 0x15370000^M
>Memory: 301680k/504480k available (6370k code, 222608k reserved, 3837k data, 448k init)^M
>McKinley Errata 9 workaround not needed; disabling it^M
>Security Framework v1.0.0 initialized^M
>SELinux:  Initializing.^M
>selinux_register_security:  Registering secondary module capability^M
>Capability LSM initialized as secondary^M
>Dentry cache hash table entries: 65536 (order: 5, 524288 bytes)^M
>Inode-cache hash table entries: 32768 (order: 4, 262144 bytes)^M
>Mount-cache hash table entries: 1024^M
>ACPI: Core revision 20060707^M
>Boot processor id 0x0/0xc02^M
>Brought up 1 CPUs^M
>Total of 1 processors activated (1945.60 BogoMIPS).^M
>checking if image is initramfs... it is^M
>Freeing initrd memory: 5696kB freed^M
>DMI present.^M
>NET: Registered protocol family 16^M
>ACPI: bus type pci registered^M
>ACPI: Interpreter enabled^M
>ACPI: Using IOSAPIC for interrupt routing^M
>ACPI: PCI Root Bridge [L000] (0000:00)^M 
>ACPI: PCI Root Bridge [L001] (0000:0e)^M
>ACPI: PCI Root Bridge [L002] (0000:1c)^M
>ACPI: PCI Root Bridge [L004] (0000:2a)^M
>ACPI: PCI Root Bridge [L006] (0000:38)^M
>ACPI: PCI Root Bridge [L008] (0000:46)^M
>ACPI: PCI Root Bridge [L010] (0000:54)^M
>ACPI: PCI Root Bridge [L012] (0000:62)^M
>ACPI: PCI Root Bridge [L014] (0000:71)^M
>ACPI: PCI Root Bridge [L000] (0000:80)^M
>ACPI: PCI Root Bridge [L001] (0000:8e)^M
>ACPI: PCI Root Bridge [L002] (0000:9c)^M 
>ACPI: PCI Root Bridge [L004] (0000:aa)^M
>ACPI: PCI Root Bridge [L006] (0000:b8)^M
>ACPI: PCI Root Bridge [L008] (0000:c6)^M
>ACPI: PCI Root Bridge [L010] (0000:d4)^M
>ACPI: PCI Root Bridge [L012] (0000:e2)^M
>ACPI: PCI Root Bridge [L014] (0000:f1)^M
>Linux Plug and Play Support v0.97 (c) Adam Belay^M
>pnp: PnP ACPI init^M
>GSI 17 (level, low) -> CPU 0 (0x0c02) vector 49^M
>pnp: PnP ACPI: found 32 devices^M
>usbcore: registered new driver usbfs^M
>usbcore: registered new driver hub^M
>NetLabel: Initializing^M
>NetLabel:  domain hash size = 128^M
>NetLabel:  protocols = UNLABELED CIPSOv4^M
>NetLabel:  unlabeled traffic allowed by default^M
>NET: Registered protocol family 2^M
>IP route cache hash table entries: 4096 (order: 1, 32768 bytes)^M
>TCP established hash table entries: 16384 (order: 4, 262144 bytes)^M
>TCP bind hash table entries: 8192 (order: 3, 131072 bytes)^M
>TCP: Hash tables configured (established 16384 bind 8192)^M
>TCP reno registered^M
>perfmon: version 2.0 IRQ 238^M
>perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47 bits)^M
>PAL Information Facility v0.5^M
>perfmon: added sampling format default_format^M
>perfmon_default_smpl: default_format v2.0 registered^M
>audit: initializing netlink socket (disabled)^M
>audit(1205851734.247:1): initialized^M
>Total HugeTLB memory allocated, 0^M
>VFS: Disk quotas dquot_6.5.1^M
>Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)^M
>Warning: Core image elf header not found^M
>Kdump: vmcore not initialized^M
>Initializing Cryptographic API^M
>ksign: Installing public key data^M
>Loading keyring^M
>- Added public key 2E5284A91F79653F^M
>- User ID: Red Hat, Inc. (Kernel Module GPG key)^M
>io scheduler noop registered^M
>io scheduler anticipatory registered^M
>io scheduler deadline registered^M
>io scheduler cfq registered (default)^M
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5^M
>EFI Time Services Driver v0.4^M
>Linux agpgart interface v0.101 (c) Dave Jones^M
>Serial: 8250/16550 driver $Revision: 1.90 $ 16 ports, IRQ sharing enabled^M
>GSI 29 (level, low) -> CPU 0 (0x0c02) vector 50^M
>ACPI: PCI Interrupt 0000:00:00.0[A] -> GSI 29 (level, low) -> IRQ 50^M
>0000:00:00.0: ttyS0 at MMIO 0xf000001d000 (irq = 50) is a 16550A^M
>ACPI: PCI Interrupt 0000:00:00.1[A] -> GSI 29 (level, low) -> IRQ 50^M
>0000:00:00.1: ttyS1 at MMIO 0xf0000018000 (irq = 50) is a 16550A^M
>0000:00:00.1: ttyS2 at MMIO 0xf0000018010 (irq = 50) is a 16550A^M
>0000:00:00.1: ttyS3 at MMIO 0xf0000018038 (irq = 50) is a 16550A^M
>GSI 133 (level, low) -> CPU 0 (0x0c02) vector 51^M
>ACPI: PCI Interrupt 0000:80:00.0[A] -> GSI 133 (level, low) -> IRQ 51^M
>0000:80:00.0: ttyS4 at MMIO 0xf010001d000 (irq = 51) is a 16550A^M
>ACPI: PCI Interrupt 0000:80:00.1[A] -> GSI 133 (level, low) -> IRQ 51^M
>0000:80:00.1: ttyS5 at MMIO 0xf0100018000 (irq = 51) is a 16550A^M
>0000:80:00.1: ttyS6 at MMIO 0xf0100018010 (irq = 51) is a 16550A^M
>0000:80:00.1: ttyS7 at MMIO 0xf0100018038 (irq = 51) is a 16550A^M
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize^M
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2^M
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx^M
>ide-floppy driver 0.99.newide^M
>usbcore: registered new driver hiddev^M
>usbcore: registered new driver usbhid^M
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver^M
>mice: PS/2 mouse device common for all mice^M
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27^M
>md: bitmap version 4.39^M
>EFI Variables Facility v0.08 2004-May-17^M
>TCP bic registered^M
>Initializing IPsec netlink socket^M
>NET: Registered protocol family 1^M
>NET: Registered protocol family 17^M
>Adding console on ttyS1 at MMIO 0xf0000018000 (options '9600n8')^M
>Freeing unused kernel memory: 448kB freed^M
>I subsystem initialized^M
>Mounting proc filesystem^M
>Mounting sysfs filesystem^M
>Creating /dev^M
>Creating initial device nodes^M
>mknod: /tmp/initrd.KU4234/dev/efirtc: No such file or directory^M
>Loading scsi_mod.ko module^M
>Loading sd_mod.ko module^M
>Loading scsi_transport_spi.ko module^M
>Loading sym53c8xx.ko module^M
>GSI 24 (level, low) -> CPU 0 (0x0c02) vector 52^M
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 24 (level, low) -> IRQ 52^M
>sym0: <1010-66> rev 0x1 at pci 0000:00:02.0 irq 52^M
>sym0: Symbios NVRAM, ID 7, Fast-80, SE, parity checking^M
>sym0: open drain IRQ line driver, using on-chip SRAM^M
>sym0: using LOAD/STORE-based firmware.^M
>sym0: handling phase mismatch from SCRIPTS.^M
>sym0: SCSI BUS has been reset.^M
>scsi0 : sym-2.2.3^M
>  Vendor: HP 36.4G  Model: ST336732LC        Rev: HPE3^M
>  Type:   Direct-Access                      ANSI SCSI revision: 02^M
> target0:0:6: tagged command queuing enabled, command queue depth 16.^M
> target0:0:6: Beginning Domain Validation^M
> target0:0:6: asynchronous^M
> target5:0:6: wide asynchronous
> target5:0:6: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 31)
> target5:0:6: Domain Validation skipping write tests
> target5:0:6: Ending Domain Validation
>SCSI device sdc: 71132960 512-byte hdwr sectors (36420 MB)
>sdc: Write Protect is off
>SCSI device sdc: drive cache: write through w/ FUA
>SCSI device sdc: 71132960 512-byte hdwr sectors (36420 MB)
>sdc: Write Protect is off
>SCSI device sdc: drive cache: write through w/ FUA
> sdc: sdc1
>sd 5:0:6:0: Attached scsi disk sdc
>GSI 129 (level, low) -> CPU 0 (0x0c02) vector 58
>ACPI: PCI Interrupt 0000:80:02.1[B] -> GSI 129 (level, low) -> IRQ 58
>sym6: <1010-66> rev 0x1 at pci 0000:80:02.1 irq 58
>sym6: Symbios NVRAM, ID 7, Fast-80, SE, parity checking
>sym6: open drain IRQ line driver, using on-chip SRAM
>sym6: using LOAD/STORE-based firmware.
>sym6: handling phase mismatch from SCRIPTS.
>sym6: SCSI BUS has been reset.
>scsi6 : sym-2.2.3
>  Vendor: HP        Model: DVD-ROM 305       Rev: 1.01
>  Type:   CD-ROM                             ANSI SCSI revision: 02
> target6:0:2: Beginning Domain Validation
> target6:0:2: asynchronous
> target6:0:2: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 16)
> target6:0:2: Domain Validation skipping write tests
> target6:0:2: Ending Domain Validation
>GSI 130 (level, low) -> CPU 0 (0x0c02) vector 59
>ACPI: PCI Interrupt 0000:80:03.0[A] -> GSI 130 (level, low) -> IRQ 59
>sym7: <1010-66> rev 0x1 at pci 0000:80:03.0 irq 59
>sym7: Symbios NVRAM, ID 7, Fast-80, SE, parity checking
>sym7: open drain IRQ line driver, using on-chip SRAM
>sym7: using LOAD/STORE-based firmware.
>sym7: handling phase mismatch from SCRIPTS.
>sym7: SCSI BUS has been reset.
>scsi7 : sym-2.2.3
>  Vendor: HP 36.4G  Model: MAN3367MC         Rev: HP05
>  Type:   Direct-Access                      ANSI SCSI revision: 02
> target7:0:6: tagged command queuing enabled, command queue depth 16.
> target7:0:6: Beginning Domain Validation
> target7:0:6: asynchronous
> target7:0:6: wide asynchronous
> target7:0:6: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 31)
> target7:0:6: Domain Validation skipping write tests
> target7:0:6: Ending Domain Validation
>SCSI device sdd: 71132960 512-byte hdwr sectors (36420 MB)
>sdd: Write Protect is off
>SCSI device sdd: drive cache: write through
>SCSI device sdd: 71132960 512-byte hdwr sectors (36420 MB)
>sdd: Write Protect is off
>SCSI device sdd: drive cache: write through
> sdd: sdd1
>sd 7:0:6:0: Attached scsi disk sdd
>GSI 131 (level, low) -> CPU 0 (0x0c02) vector 60
>ACPI: PCI Interrupt 0000:80:03.1[B] -> GSI 131 (level, low) -> IRQ 60
>sym8: <1010-66> rev 0x1 at pci 0000:80:03.1 irq 60
>sym8: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
>sym8: open drain IRQ line driver, using on-chip SRAM
>sym8: using LOAD/STORE-based firmware.
>sym8: handling phase mismatch from SCRIPTS.
>sym8: SCSI BUS has been reset.
>scsi8 : sym-2.2.3
>Loading cciss.ko module
>HP CISS Driver (v 3.6.20-RH1)
>GSI 76 (level, low) -> CPU 0 (0x0c02) vector 61
>ACPI: PCI Interrupt 0000:47:04.0[A] -> GSI 76 (level, low) -> IRQ 61
>cciss0: <0x46> at PCI 0000:47:04.0 IRQ 61 using DAC
>Loading jbd.ko module
>Loading ext3.ko module
>Loading dm-mod.kdevice-mapper: uevent: version 1.0.3
>o module
>device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
>Loading dm-mirror.ko module
>Loading dm-zero.ko module
>Loading dm-snapshot.ko module
>Loading raid0.ko module
>md: raid0 personality registered for level 0
>Creating Block Devices
>Creating block device cciss/c0d0
>Creating block device ram0
>Creating block device ram1
>Creating block device ram10
>Creating block device ram11
>Creating block device ram12
>Creating block device ram13
>Creating block device ram14
>Creating block device ram15
>Creating block device ram2
>Creating block device ram3
>Creating block device ram4
>Creating block device ram5
>Creating block device ram6
>Creating block device ram7
>Creating block device ram8
>Creating block device ram9
>Creating block dmd: md0 stopped.
>evice sda
>Creating block device sdb
>Creating block device sdc
>Creating block device sdd
>Making device-mapper control node
>md: bind<sdb1>
>md: bind<sdc1>
>md: bind<sdd1>
>md: bind<sda2>
>md0: setting max_sectors to 512, segment boundary to 131071
>raid0: looking at sda2
>raid0:   comparing sda2(35463936) with sda2(35463936)
>raid0:   END
>raid0:   ==> UNIQUE
>raid0: 1 zones
>raid0: looking at sdd1
>raid0:   comparing sdd1(35566336) with sda2(35463936)
>raid0:   NOT EQUAL
>raid0:   comparing sdd1(35566336) with sdd1(35566336)
>raid0:   END
>raid0:   ==> UNIQUE
>raid0: 2 zones
>raid0: looking at sdc1
>raid0:   comparing sdc1(35566336) with sda2(35463936)
>raid0:   NOT EQUAL
>raid0:   comparing sdc1(35566336) with sdd1(35566336)
>raid0:   EQUAL
>raid0: looking at sdb1
>raid0:   comparing sdb1(35566336) with sda2(35463936)
>raid0:   NOT EQUAL
>raid0:   comparing sdb1(35566336) with sdd1(35566336)
>raid0:   EQUAL
>raid0: FINAL 2 zones
>raid0: zone 1
>raid0: checking sda2 ... nope.
>raid0: checking sdb1 ... contained as device 0
>  (35566336) is smallest!.
>raid0: checking sdc1 ... contained as device 1
>raid0: checking sdd1 ... contained as device 2
>raid0: zone->nb_dev: 3, size: 307200
>raid0: current zone offset: 35566336
>raid0: done.
>raid0 : md_size is 142162944 blocks.
>raid0 : conf->hash_spacing is 141855744 blocks.
>raid0 : nb_zone is 2.
>raid0 : Allocating 16 bytes for hash.
>mdadm: /dev/md0 has been started with 4 drives.
>Scanning logical volumes
>  Reading all physical volumes.  This may take a while...
>  Found volume group "VolGroup00" using metadata type lvm2
>Activating logical volumes
>  5 logical volume(s) in volume group "VolGroup00" now active
>dm_task_set_name: Device /dev/mapper/-swap0 not found
>Command failed
>dm_task_set_name: Device /dev/mapper/-swap1 not found
>Command failed
>dm_task_set_name: Device /dev/mapper/-swap2 not found
>Command failed
>dm_task_set_name: Device /dev/mapper/-swap3 not found
>Command failed
>hwclock: Could not access RTC: No such file or directory
>Attempting to enter user-space to capture vmcore
>Creating root device.
>Checking root filesystem.
>fsck 1.38 (30-Jun-2005)
>fsck: WARNING: couldn't open /etc/fstab: No such file or directory
>e2fsck 1.38 (30-Jun-2005)
>fsck.ext3: while determining whether /dev/VolGroup00/LogVol00 is mounted.
>/dev/VolGroup00/LogVol00: recovering journal
>/dev/VolGroup00/LogVol00: clean, 63365/33521664 files, 1558208/33497088 blocks
>Mounting root filesystem.
>Trying mount -t ext3 /dev/VolGroup00/LogVol00 /sysroot
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Using ext3 on root filesystem
>Switching to new root and running init.
>audit(1205851815.598:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>audit(1205851815.999:3): policy loaded auid=4294967295 ses=4294967295
>INIT: version 2.86 booting
>                Welcome to Red Hat Enterprise Linux Server
>                Press 'I' to enter interactive startup.
>Cannot access the Hardware Clock via any known method.
>Use the --debug option to see the details of our search for an access method.
>Setting clock  (utc): Tue Mar 18 10:50:17 EDT 2008 [  OK  ]
>Starting udev: [  OK  ]
>Setting hostname hp-olympia1.rhts.boston.redhat.com:  [  OK  ]
>Setting up Logical Volume Management:   5 logical volume(s) in volume group "VolGroup00" now active
>[  OK  ]
>Mounting local filesystems:  [  OK  ]
>Enabling local filesystem quotas:  [  OK  ]
>INIT: Entering runlevel: 3
>Entering non-interactive startup
>Starting monitoring for VG VolGroup00:   5 logical volume(s) in volume group "VolGroup00" monitored
>[  OK  ]
>Checking for hardware changes [  OK  ]
>Bringing up loopback interface:  [  OK  ]
>Bringing up interface eth0:  
>Determining IP information for eth0... done.
>[  OK  ]
>Starting restorecond: [  OK  ]
>Starting system logger: [  OK  ]
>Starting kernel logger: [  OK  ]
>export BOOT_IMAGE="scsi0:EFI\\redhat\\vmlinuz-2.6.18-84.el5"
>export CONSOLE="/dev/console"
>export HOME="/"
>export INIT_VERSION="sysvinit-2.86"
>export LANG="en_US.UTF-8"
>export OLDPWD
>export PATH="/sbin:/usr/sbin:/bin:/usr/bin"
>export PREVLEVEL="N"
>export PWD="/"
>export RUNLEVEL="3"
>export SELINUX_INIT="YES"
>export SHELL="/bin/sh"
>export SHLVL="2"
>export TERM="linux"
>export elfcorehdr="655248K"
>export max_addr="640M"
>export min_addr="128M"
>export previous="N"
>export runlevel="3"
>export BOOT_IMAGE="scsi0:EFI\\redhat\\vmlinuz-2.6.18-84.el5"
>export CONSOLE="/dev/console"
>export HOME="/"
>export INIT_VERSION="sysvinit-2.86"
>export LANG="en_US.UTF-8"
>export OLDPWD
>export PATH="/sbin:/usr/sbin:/bin:/usr/bin"
>export PREVLEVEL="N"
>export PWD="/"
>export RUNLEVEL="3"
>export SELINUX_INIT="YES"
>export SHELL="/bin/sh"
>export SHLVL="2"
>export TERM="linux"
>export elfcorehdr="655248K"
>export max_addr="640M"
>export min_addr="128M"
>export previous="N"
>export runlevel="3"
>export BOOT_IMAGE="scsi0:EFI\\redhat\\vmlinuz-2.6.18-84.el5"
>export CONSOLE="/dev/console"
>export HOME="/"
>export INIT_VERSION="sysvinit-2.86"
>export LANG="en_US.UTF-8"
>export OLDPWD
>export PATH="/sbin:/usr/sbin:/bin:/usr/bin"
>export PREVLEVEL="N"
>export PWD="/"
>export RUNLEVEL="3"
>export SELINUX_INIT="YES"
>export SHELL="/bin/sh"
>export SHLVL="2"
>export TERM="linux"
>export elfcorehdr="655248K"
>export max_addr="640M"
>export min_addr="128M"
>export previous="N"
>export runlevel="3"
>Starting irqbalance: [  OK  ]
>Starting mcstransd: [  OK  ]
>Starting portmap: [  OK  ]
>Starting NFS statd: [  OK  ]
>Starting mdmonitor: [  OK  ]
>Starting RPC idmapd: [  OK  ]
>+ . /etc/init.d/functions
>++ TEXTDOMAIN=initscripts
>++ umask 022
>++ PATH=/sbin:/usr/sbin:/bin:/usr/bin
>++ export PATH
>++ '[' -z '' ']'
>++ COLUMNS=80
>++ '[' -z '' ']'
>+++ /sbin/consoletype
>++ CONSOLETYPE=serial
>++ '[' -f /etc/sysconfig/i18n -a -z '' ']'
>++ . /etc/profile.d/lang.sh
>+++ sourced=0
>+++ for langfile in /etc/sysconfig/i18n '$HOME/.i18n'
>+++ '[' -f /etc/sysconfig/i18n ']'
>+++ . /etc/sysconfig/i18n
>++++ LANG=en_US.UTF-8
>++++ SYSFONT=latarcyrheb-sun16
>+++ sourced=1
>+++ for langfile in /etc/sysconfig/i18n '$HOME/.i18n'
>+++ '[' -f //.i18n ']'
>+++ '[' -n '' ']'
>+++ '[' 1 = 1 ']'
>+++ '[' -n en_US.UTF-8 ']'
>+++ export LANG
>+++ '[' -n '' ']'
>+++ unset LC_ADDRESS
>+++ '[' -n '' ']'
>+++ unset LC_CTYPE
>+++ '[' -n '' ']'
>+++ unset LC_COLLATE
>+++ '[' -n '' ']'
>+++ unset LC_IDENTIFICATION
>+++ '[' -n '' ']'
>+++ unset LC_MEASUREMENT
>+++ '[' -n '' ']'
>+++ unset LC_MESSAGES
>+++ '[' -n '' ']'
>+++ unset LC_MONETARY
>+++ '[' -n '' ']'
>+++ unset LC_NAME
>+++ '[' -n '' ']'
>+++ unset LC_NUMERIC
>+++ '[' -n '' ']'
>+++ unset LC_PAPER
>+++ '[' -n '' ']'
>+++ unset LC_TELEPHONE
>+++ '[' -n '' ']'
>+++ unset LC_TIME
>+++ '[' -n '' ']'
>+++ unset LC_ALL
>+++ '[' -n '' ']'
>+++ unset LANGUAGE
>+++ '[' -n '' ']'
>+++ unset LINGUAS
>+++ '[' -n '' ']'
>+++ unset _XKB_CHARSET
>++++ /sbin/consoletype
>+++ consoletype=serial
>+++ '[' -n '' ']'
>+++ '[' -n '' ']'
>+++ '[' -n en_US.UTF-8 ']'
>+++ case $LANG in
>+++ '[' linux = linux ']'
>+++ '[' serial = vt ']'
>+++ unset SYSFONTACM SYSFONT
>+++ unset sourced
>+++ unset langfile
>++ '[' -z '' ']'
>++ '[' -f /etc/sysconfig/init ']'
>++ . /etc/sysconfig/init
>+++ BOOTUP=serial
>+++ GRAPHICAL=yes
>+++ RES_COL=60
>+++ MOVE_TO_COL='echo -en \033[60G'
>+++ SETCOLOR_SUCCESS='echo -en \033[0;32m'
>+++ SETCOLOR_FAILURE='echo -en \033[0;31m'
>+++ SETCOLOR_WARNING='echo -en \033[0;33m'
>+++ SETCOLOR_NORMAL='echo -en \033[0;39m'
>+++ LOGLEVEL=3
>+++ PROMPT=yes
>+++ AUTOSWAP=no
>++ '[' serial = serial ']'
>++ BOOTUP=serial
>++ MOVE_TO_COL=
>++ SETCOLOR_SUCCESS=
>++ SETCOLOR_FAILURE=
>++ SETCOLOR_WARNING=
>++ SETCOLOR_NORMAL=
>++ '[' serial '!=' verbose ']'
>++ INITLOG_ARGS=-q
>++ __sed_discard_ignored_files='/$~\|\.bak\|\.orig\|\.rpmnew\|\.rpmorig\|\.rpmsave$$/d'
>+ KEXEC=/sbin/kexec
>+ BOOTDIR=/boot
>+ KDUMP_KERNELVER=
>+ KDUMP_COMMANDLINE=
>+ KEXEC_ARGS=
>+ KDUMP_CONFIG_FILE=/etc/kdump.conf
>+ LOGGER='/usr/bin/logger -p info -t kdump'
>++ uname -m
>+ ARCH=ia64
>+ standard_kexec_args=-p
>+ '[' -f /etc/sysconfig/kdump ']'
>+ . /etc/sysconfig/kdump
>++ KDUMP_KERNELVER=
>++ KDUMP_COMMANDLINE=
>++ KDUMP_COMMANDLINE_APPEND='irqpoll maxcpus=1 reset_devices machvec=dig'
>++ KEXEC_ARGS=--noio
>++ KDUMP_BOOTDIR=/boot/efi/efi/redhat
>++ KDUMP_IMG=vmlinuz
>++ KDUMP_IMG_EXT=
>+ case "$1" in
>+ '[' -s /proc/vmcore ']'
>+ start
>+ status
>+ '[' '!' -e /sys/kernel/kexec_crash_loaded ']'
>++ cat /sys/kernel/kexec_crash_loaded
>+ rc=0
>+ '[' 0 == 1 ']'
>+ return 1
>+ rc=1
>+ '[' 1 == 2 ']'
>+ '[' 1 == 0 ']'
>+ check_config
>+ '[' -z '' ']'
>++ uname -r
>+ local running_kernel=2.6.18-84.el5
>++ echo 2.6.18-84.el5
>++ sed -r 's/(smp|xen)//g'
>+ kdump_kver=2.6.18-84.el5
>+ '[' ia64 == i686 ']'
>+ kdump_kernel=/boot/efi/efi/redhat/vmlinuz-2.6.18-84.el5
>+ kdump_initrd=/boot/efi/efi/redhat/initrd-2.6.18-84.el5kdump.img
>+ '[' '!' -f /boot/efi/efi/redhat/vmlinuz-2.6.18-84.el5 ']'
>+ '[' '!' -f /boot/efi/efi/redhat/initrd-2.6.18-84.el5kdump.img ']'
>++ stat -c %Y /boot/efi/efi/redhat/initrd-2.6.18-84.el5kdump.img
>+ image_time=1205851180
>++ grep '^kdump_post' /etc/kdump.conf
>++ cut '-d ' -f2
>+ KDUMP_POST=
>+ files='/etc/kdump.conf /boot/efi/efi/redhat/vmlinuz-2.6.18-84.el5 '
>+ modified_files=
>+ for file in '$files'
>+ time_stamp=0
>+ '[' -f /etc/kdump.conf ']'
>++ stat -c %Y /etc/kdump.conf
>+ time_stamp=1205850496
>+ '[' 1205850496 -gt 1205851180 ']'
>+ for file in '$files'
>+ time_stamp=0
>+ '[' -f /boot/efi/efi/redhat/vmlinuz-2.6.18-84.el5 ']'
>++ stat -c %Y /boot/efi/efi/redhat/vmlinuz-2.6.18-84.el5
>+ time_stamp=1204321148
>+ '[' 1204321148 -gt 1205851180 ']'
>+ '[' -n '' -a '' '!=' ' ' ']'
>+ return 0
>+ '[' 0 '!=' 0 ']'
>+ load_kdump
>+ '[' -z '' ']'
>++ cat /proc/cmdline
>+ KDUMP_COMMANDLINE='BOOT_IMAGE=scsi0:EFI\redhat\vmlinuz-2.6.18-84.el5 root=/dev/VolGroup00/LogVol00  ro irqpoll maxcpus=1 reset_devices machvec=dig elfcorehdr=655248K max_addr=640M min_addr=128M'
>++ uname -m
>+ ARCH=ia64
>+ '[' ia64 == ppc64 ']'
>++ grep 'Crash kernel' /proc/iomem
>++ grep -v 00000000-00000000
>+ MEM_RESERVED=
>+ '[' -z '' ']'
>+ /usr/bin/logger -p info -t kdump 'No crashkernel parameter specified for running kernel'
>+ return 1
>+ '[' 1 '!=' 0 ']'
>+ echo -n 'Starting kdump:'
>Starting kdump:+ failure
>+ local rc=0
>+ '[' serial '!=' verbose -a -z '' ']'
>+ echo_failure
>+ '[' serial = color ']'
>+ echo -n '['
>[+ '[' serial = color ']'
>+ echo -n FAILED
>FAILED+ '[' serial = color ']'
>+ echo -n ']'
>]+ echo -ne '\r'
>+ return 1
>+ '[' -x /usr/bin/rhgb-client ']'
>+ return 0
>+ echo
>
>+ /usr/bin/logger -p info -t kdump 'failed to start up'
>+ return 1
>+ exit 1
>Starting system message bus: [  OK  ]
>[  OK  ] Bluetooth services:[  OK  ]
>Mounting other filesystems:  [  OK  ]
>Starting PC/SC smart card daemon (pcscd): [  OK  ]
>Starting auditd: [  OK  ]
>Starting hidd: [  OK  ]
>Starting autofs:  Loading autofs4: [  OK  ]
>Starting automount: [  OK  ]
>[  OK  ]
>Starting acpi daemon: [  OK  ]
>Starting sshd: [  OK  ]
>Starting cups: [  OK  ]
>Starting ntpd: [  OK  ]
>Starting sendmail: [  OK  ]
>Starting sm-client: [  OK  ]
>Starting console mouse services: [  OK  ]
>Starting crond: [  OK  ]
>Starting xfs: [  OK  ]
>Starting anacron: [  OK  ]
>Starting atd: [  OK  ]
>Starting salinfo_decode_all: [  OK  ]
>Starting yum-updatesd: [  OK  ]
>Starting Avahi daemon... [  OK  ]
>Starting HAL daemon: [  OK  ]
>Starting smartd: 
>Red Hat Enterprise Linux Server release 5.2 Beta (Tikanga)
>Kernel 2.6.18-84.el5 on an ia64
>
>hp-olympia1.rhts.boston.redhat.com login:
>

Actions: View

Attachments on bug 436426: 298402