Attachment 298456 Details for Bug 437056 – 20MB SanDisk PCMCIA tests with F8

20MB SanDisk PCMCIA tests with F8

pcmcia-flash-f8.txt (text/plain), 36.97 KB, created by Charles R. Anderson on 2008-03-18 21:53:39 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Charles R. Anderson

Created: 2008-03-18 21:53:39 UTC

Size: 36.97 KB

patch

obsolete

>Script started on Tue 18 Mar 2008 01:59:58 PM EDT
>
># pccardctl ls
>Socket 0 Bridge:   	[yenta_cardbus] 	(bus ID: 0000:15:00.0)
>Socket 0 Device 0:	[pata_pcmcia]		(bus ID: 0.0)
>
># pccardctl ident
>Socket 0:
>  product info: "SunDisk", "SDP", "5/3 0.6", ""
>  manfid: 0x0045, 0x0401
>  function: 0x4 (fixed disk), 9
>
># pccardctl status
>Socket 0:
>  3.3V 16-bit PC Card
>  Subdevice 0 (function 0) bound to driver "pata_pcmcia"
>
># pccardctl info
>PRODID_1="SunDisk"
>PRODID_2="SDP"
>PRODID_3="5/3 0.6"
>PRODID_4=""
>MANFID=0045,0401
>FUNCID=4
>
># dmesg
>Linux version 2.6.23.8-63.fc8 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Wed Nov 21 18:51:08 EST 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
> BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000bf6b0000 (usable)
> BIOS-e820: 00000000bf6b0000 - 00000000bf6cc000 (ACPI data)
> BIOS-e820: 00000000bf6cc000 - 00000000bf700000 (ACPI NVS)
> BIOS-e820: 00000000bf700000 - 00000000c0000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 000000013c000000 (usable)
>Warning only 4GB will be used.
>Use a HIGHMEM64G enabled kernel.
>3200MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f6900
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 1048576) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->  1048576
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->  1048576
>On node 0 totalpages: 1048576
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 6400 pages used for memmap
>  HighMem zone: 812800 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI present.
>Using APIC driver default
>ACPI: RSDP 000F68D0, 0024 (r2 LENOVO)
>ACPI: XSDT BF6BB765, 0094 (r1 LENOVO TP-7L        2070  LTP        0)
>ACPI: FACP BF6BB900, 00F4 (r3 LENOVO TP-7L        2070 LNVO        1)
>ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126]
>ACPI: DSDT BF6BBD1D, FEEB (r1 LENOVO TP-7L        2070 MSFT  3000000)
>ACPI: FACS BF6E4000, 0040
>ACPI: SSDT BF6BBAB4, 0269 (r1 LENOVO TP-7L        2070 MSFT  3000000)
>ACPI: ECDT BF6CBC08, 0052 (r1 LENOVO TP-7L        2070 LNVO        1)
>ACPI: TCPA BF6CBC5A, 0032 (r2 LENOVO TP-7L        2070 LNVO        1)
>ACPI: APIC BF6CBC8C, 0068 (r1 LENOVO TP-7L        2070 LNVO        1)
>ACPI: MCFG BF6CBCF4, 003C (r1 LENOVO TP-7L        2070 LNVO        1)
>ACPI: HPET BF6CBD30, 0038 (r1 LENOVO TP-7L        2070 LNVO        1)
>ACPI: SLIC BF6CBDF0, 0176 (r1 LENOVO TP-7L        2070  LTP        0)
>ACPI: BOOT BF6CBF66, 0028 (r1 LENOVO TP-7L        2070  LTP        1)
>ACPI: ASF! BF6CBF8E, 0072 (r16 LENOVO TP-7L        2070 PTL         1)
>ACPI: SSDT BF6E26D9, 025F (r1 LENOVO TP-7L        2070 INTL 20050513)
>ACPI: SSDT BF6E2938, 00A6 (r1 LENOVO TP-7L        2070 INTL 20050513)
>ACPI: SSDT BF6E29DE, 04F7 (r1 LENOVO TP-7L        2070 INTL 20050513)
>ACPI: SSDT BF6E2ED5, 01D8 (r1 LENOVO TP-7L        2070 INTL 20050513)
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at c4000000 (gap: c0000000:30000000)
>swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000
>swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000
>swsusp: Registered nosave memory region: 00000000000d2000 - 00000000000d4000
>swsusp: Registered nosave memory region: 00000000000d4000 - 00000000000e0000
>swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
>Built 1 zonelists in Zone order.  Total pages: 1040384
>Kernel command line: initrd=initrd0.img root=CDLABEL=new-i386 rootfstype=iso9660 ro quiet liveimg rhgb  BOOT_IMAGE=vmÎ
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07a8000 soft=c0788000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2194.517 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 3092332k/4194304k available (2184k kernel code, 42664k reserved, 1116k data, 280k init, 2218688k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc073f000 - 0xc0785000   ( 280 kB)
>      .data : 0xc0622245 - 0xc0739544   (1116 kB)
>      .text : 0xc0400000 - 0xc0622245   (2184 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 4393.23 BogoMIPS (lpj=2196617)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>CPU0: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz stepping 0b
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07a9000 soft=c0789000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4388.98 BogoMIPS (lpj=2194490)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz stepping 0b
>Total of 2 processors activated (8782.21 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]:
>Measured 1330098 cycles TSC warp between CPUs, turning off TSC clock.
>Marking TSC unstable due to: check_tsc_sync_source failed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=1552 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 13:56:14  Date: 03/18/08
>NET: Registered protocol family 16
>ACPI: ACPI Dock Station Driver 
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 3.00 entry at 0xfdda7, last bus=24
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: EC description table is found, configuring boot EC
>ACPI: System BIOS is requesting _OSI(Linux)
>ACPI: If "acpi_osi=Linux" works better,
>Please send dmidecode to linux-acpi@vger.kernel.org
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: Power Resource [PUBS] (on)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Time: hpet clocksource has been installed.
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:00: iomem range 0xc0000-0xc3fff could not be reserved
>pnp: 00:00: iomem range 0xc4000-0xc7fff could not be reserved
>pnp: 00:00: iomem range 0xc8000-0xcbfff has been reserved
>pnp: 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved
>pnp: 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
>pnp: 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
>pnp: 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
>PCI: Bridge: 0000:00:1c.0
>  IO window: 2000-2fff
>  MEM window: fc000000-fdffffff
>  PREFETCH window: f8000000-f80fffff
>PCI: Bridge: 0000:00:1c.1
>  IO window: 3000-3fff
>  MEM window: dc000000-df3fffff
>  PREFETCH window: dfe00000-dfefffff
>PCI: Bridge: 0000:00:1c.2
>  IO window: 4000-4fff
>  MEM window: d8000000-d9ffffff
>  PREFETCH window: dfb00000-dfbfffff
>PCI: Bridge: 0000:00:1c.3
>  IO window: 5000-5fff
>  MEM window: d4000000-d5ffffff
>  PREFETCH window: df800000-df8fffff
>PCI: Bridge: 0000:00:1c.4
>  IO window: 6000-6fff
>  MEM window: d0000000-d1ffffff
>  PREFETCH window: df500000-df5fffff
>PCI: Bus 22, cardbus bridge: 0000:15:00.0
>  IO window: 00007000-000070ff
>  IO window: 00007400-000074ff
>  PREFETCH window: f4000000-f7ffffff
>  MEM window: c4000000-c7ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 7000-afff
>  MEM window: f8300000-fbffffff
>  PREFETCH window: f4000000-f7ffffff
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 20 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>PCI: Enabling device 0000:00:1e.0 (0005 -> 0007)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:15:00.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 4535k freed
>Simple Boot Flag at 0x35 set to 0x1
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1205848574.622:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key AD2F53515391081
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>Allocate Port Service[0000:00:1c.3:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: SSDT BF6E1B32, 02C4 (r1  PmRef  Cpu0Ist      100 INTL 20050513)
>ACPI: SSDT BF6E1E7B, 085E (r1  PmRef  Cpu0Cst      100 INTL 20050513)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT BF6E1A6A, 00C8 (r1  PmRef  Cpu1Ist      100 INTL 20050513)
>ACPI: SSDT BF6E1DF6, 0085 (r1  PmRef  Cpu1Cst      100 INTL 20050513)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Thermal Zone [THM0] (59 C)
>ACPI: Thermal Zone [THM1] (58 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected an Intel 965GM Chipset.
>agpgart: Detected 7676K stolen memory.
>agpgart: AGP aperture is 256M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:15:00.0 [17aa:20c6]
>Yenta: ISA IRQ mask 0x04b8, PCI irq 20
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0x7000 - 0xafff
>cs: IO port probe 0x7000-0xafff: clean.
>pcmcia: parent PCI bridge Memory window: 0xf8300000 - 0xfbffffff
>pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 0:602:938
>Freeing unused kernel memory: 280k freed
>Write protecting the kernel read-only data: 844k
>SCSI subsystem initialized
>loop: module loaded
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001860
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>libata version 2.21 loaded.
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1a.1: irq 17, io base 0x00001880
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x000018a0
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.1: irq 21, io base 0x000018c0
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>Clocksource tsc unstable (delta = -308890036 ns)
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.2: irq 22, io base 0x000018e0
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 1-2: new full speed USB device using uhci_hcd and address 2
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000
>serio: Synaptics pass-through port at isa0060/serio1/input0
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe226c00
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe227000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
>ACPI: PCI Interrupt 0000:15:00.1[B] -> GSI 17 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:15:00.1 to 64
>firewire_ohci: Added fw-ohci device 0000:15:00.1, OHCI version 1.10
>ahci 0000:00:1f.2: version 2.3
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 20
>ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x1) don't match
>usb 1-2: device not accepting address 2, error -71
>firewire_core: created new fw device fw0 (0 config rom retries, S400)
>usb 7-6: new high speed USB device using ehci_hcd and address 2
>usb 7-6: configuration #1 chosen from 1 choice
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x1 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part 
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ahci
>ata1: SATA max UDMA/133 cmd 0xf8910100 ctl 0x00000000 bmdma 0x00000000 irq 218
>usb 1-2: new full speed USB device using uhci_hcd and address 4
>usb 1-2: configuration #1 chosen from 1 choice
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: ST9160823AS, 3.CMC, max UDMA/100
>ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      ST9160823AS      3.CM PQ: 0 ANSI: 5
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi1 : ata_piix
>scsi2 : ata_piix
>ata2: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011c00 irq 14
>ata3: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011c08 irq 15
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-U10N, 1.05, max UDMA/33
>ata2.00: configured for UDMA/33
>ata3: port disabled. ignoring.
>scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-U10N  1.05 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>ISO 9660 Extensions: Microsoft Joliet Level 3
>Unable to load NLS charset utf8
>Unable to load NLS charset utf8
>ISO 9660 Extensions: RRIP_1991A
>squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>IBM TrackPoint firmware: 0x0e, buttons: 3/3
>input: TPPS/2 IBM TrackPoint as /class/input/input3
>audit(1205848582.452:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  8 users, 11 roles, 2356 types, 114 bools, 1 sens, 1024 cats
>security:  67 classes, 212210 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>inode_doinit_with_dentry:  no dentry for dev=dm-0 ino=1148
>inode_doinit_with_dentry:  no dentry for dev=dm-0 ino=290
>inode_doinit_with_dentry:  no dentry for dev=dm-0 ino=289
>inode_doinit_with_dentry:  no dentry for dev=dm-0 ino=2068
>SELinux: initialized (dev loop2, type squashfs), not configured for labeling
>SELinux: initialized (dev loop0, type squashfs), not configured for labeling
>SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1205848584.164:3): policy loaded auid=4294967295
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: AC Adapter [AC] (on-line)
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /class/input/input5
>ACPI: Lid Switch [LID]
>input: Sleep Button (CM) as /class/input/input6
>ACPI: Sleep Button (CM) [SLPB]
>input: Video Bus as /class/input/input7
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>input: Video Bus as /class/input/input8
>ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
>Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:19.0 to 64
>input: PC Speaker as /class/input/input9
>e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:1e:37:18:b2:6d
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci: SDHCI controller found at 0000:15:00.2 [1180:0822] (rev 21)
>ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:15:00.2 to 64
>mmc0: SDHCI at 0xf8301800 irq 22 DMA
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.1.19kds
>iwl4965: Copyright(c) 2003-2007 Intel Corporation
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>iwl4965: Detected Intel Wireless WiFi Link 4965AGN
>thinkpad_acpi: ThinkPad ACPI Extras v0.16
>thinkpad_acpi: http://ibm-acpi.sf.net/
>thinkpad_acpi: ThinkPad BIOS 7LETA7WW (2.07 ), EC 7KHT24WW-1.08
>thinkpad_acpi: Lenovo ThinkPad T61
>thinkpad_acpi: radio switch found; radios are enabled
>input: ThinkPad Extra Buttons as /class/input/input10
>ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 19
>iwl4965: Tunable channels: 11 802.11bg, 13 802.11a channels
>phy0: Selected rate control algorithm 'iwl-4965-rs'
>ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 21
>hda_intel: probe_mask set to 0x1 for device 17aa:20ac
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 20
>mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>audit(1205863043.894:4): audit_pid=2413 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
>e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:1b:ba:a5:26:00
>wlan0: RX authentication from 00:1b:ba:a5:26:00 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:1b:ba:a5:26:00
>wlan0: RX AssocResp from 00:1b:ba:a5:26:00 (capab=0x401 status=0 aid=3)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:1b:ba:a5:26:00)
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
>wlan0: no IPv6 routers present
>eth0: no IPv6 routers present
>pccard: PCMCIA card inserted into slot 0
>cs: memory probe 0xf8300000-0xfbffffff: excluding 0xf8300000-0xf86cffff 0xf8e70000-0xf923ffff 0xf9db0000-0xfa17ffff 0xfacf0000-0xfb0bffff
>pcmcia: registering new device pcmcia0.0
>scsi3 : pata_pcmcia
>ata4: PATA max PIO0 cmd 0x00017100 ctl 0x0001710e bmdma 0x00000000 irq 3
>ata4.00: CFA: STI Flash 6.2.0, Rev6.2.0, max PIO1
>ata4.00: 125184 sectors, multi 0: LBA 
>ata4.00: configured for PIO0
>scsi 3:0:0:0: Direct-Access     ATA      STI Flash 6.2.0  Rev6 PQ: 0 ANSI: 5
>sd 3:0:0:0: [sdb] 125184 512-byte hardware sectors (64 MB)
>sd 3:0:0:0: [sdb] Write Protect is off
>sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:0:0: [sdb] 125184 512-byte hardware sectors (64 MB)
>sd 3:0:0:0: [sdb] Write Protect is off
>sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 3:0:0:0: [sdb] Attached SCSI removable disk
>sd 3:0:0:0: Attached scsi generic sg2 type 0
>SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
>sd 3:0:0:0: [sdb] 125184 512-byte hardware sectors (64 MB)
>sd 3:0:0:0: [sdb] Write Protect is off
>sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> sdb: unknown partition table
>pccard: card ejected from slot 0
>ata4.00: disabled
>sd 3:0:0:0: [sdb] Stopping disk
>sd 3:0:0:0: [sdb] START_STOP FAILED
>sd 3:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>pccard: PCMCIA card inserted into slot 0
>pcmcia: registering new device pcmcia0.0
>scsi4 : pata_pcmcia
>ata5: PATA max PIO0 cmd 0x00017100 ctl 0x0001710e bmdma 0x00000000 irq 3
>ata5.00: CFA: SMART ATA FLASH DISK, V1.01, max PIO4
>ata5.00: 31104 sectors, multi 0: LBA 
>ata5.00: configured for PIO0
>scsi 4:0:0:0: Direct-Access     ATA      SMART ATA FLASH  V1.0 PQ: 0 ANSI: 5
>sd 4:0:0:0: [sdb] 31104 512-byte hardware sectors (16 MB)
>sd 4:0:0:0: [sdb] Write Protect is off
>sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>sd 4:0:0:0: [sdb] 31104 512-byte hardware sectors (16 MB)
>sd 4:0:0:0: [sdb] Write Protect is off
>sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 4:0:0:0: [sdb] Attached SCSI removable disk
>sd 4:0:0:0: Attached scsi generic sg2 type 0
>SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
>sd 4:0:0:0: [sdb] 31104 512-byte hardware sectors (16 MB)
>sd 4:0:0:0: [sdb] Write Protect is off
>sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> sdb: unknown partition table
>pccard: card ejected from slot 0
>ata5.00: disabled
>sd 4:0:0:0: [sdb] Stopping disk
>sd 4:0:0:0: [sdb] START_STOP FAILED
>sd 4:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>pccard: PCMCIA card inserted into slot 0
>pcmcia: registering new device pcmcia0.0
>scsi5 : pata_pcmcia
>ata6: PATA max PIO0 cmd 0x00017100 ctl 0x0001710e bmdma 0x00000000 irq 3
>ata6.00: CFA: Hitachi CV 7.2.2, Rev 2.02, max PIO1
>ata6.00: 15744 sectors, multi 0: LBA 
>ata6.00: configured for PIO0
>scsi 5:0:0:0: Direct-Access     ATA      Hitachi CV 7.2.2 Rev  PQ: 0 ANSI: 5
>sd 5:0:0:0: [sdb] 15744 512-byte hardware sectors (8 MB)
>sd 5:0:0:0: [sdb] Write Protect is off
>sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 5:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>sd 5:0:0:0: [sdb] 15744 512-byte hardware sectors (8 MB)
>sd 5:0:0:0: [sdb] Write Protect is off
>sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 5:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 5:0:0:0: [sdb] Attached SCSI removable disk
>sd 5:0:0:0: Attached scsi generic sg2 type 0
>SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
>sd 5:0:0:0: [sdb] 15744 512-byte hardware sectors (8 MB)
>sd 5:0:0:0: [sdb] Write Protect is off
>sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 5:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> sdb: unknown partition table
>pccard: card ejected from slot 0
>ata6.00: disabled
>sd 5:0:0:0: [sdb] Stopping disk
>sd 5:0:0:0: [sdb] START_STOP FAILED
>sd 5:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
>pccard: PCMCIA card inserted into slot 0
>pcmcia: registering new device pcmcia0.0
>scsi6 : pata_pcmcia
>ata7: PATA max PIO0 cmd 0x00017100 ctl 0x0001710e bmdma 0x00000000 irq 3
>ata7.00: CFA: SunDisk SDP3B-20, vcb 1.34, max PIO1
>ata7.00: 40960 sectors, multi 0: LBA 
>ata7.00: configured for PIO0
>scsi 6:0:0:0: Direct-Access     ATA      SunDisk SDP3B-20 vcb  PQ: 0 ANSI: 5
>sd 6:0:0:0: [sdb] 40960 512-byte hardware sectors (21 MB)
>sd 6:0:0:0: [sdb] Write Protect is off
>sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>sd 6:0:0:0: [sdb] 40960 512-byte hardware sectors (21 MB)
>sd 6:0:0:0: [sdb] Write Protect is off
>sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> sdb: unknown partition table
>sd 6:0:0:0: [sdb] Attached SCSI removable disk
>sd 6:0:0:0: Attached scsi generic sg2 type 0
>
># hdparm /dev/sdb
>
>/dev/sdb:
> IO_support    =  0 (default 16-bit)
> readonly      =  0 (off)
> readahead     = 256 (on)
> geometry      = 2/255/63, sectors = 40960, start = 0
>
># hdparm -i /dev/sdb
>
>/dev/sdb:
>
> Model=SunDisk SDP3B-20                        , FwRev=vcb 1.34, SerialNo=         MT302014239
> Config={ HardSect NotMFM Removeable DTR>10Mbs nonMagnetic }
> RawCHS=640/2/32, TrkSize=0, SectSize=576, ECCbytes=4
> BuffType=DualPort, BuffSize=1kB, MaxMultSect=1, MultSect=?0?
> CurCHS=640/2/32, CurSects=40960, LBA=yes, LBAsects=40960
> IORDY=no
> PIO modes:  pio0 pio1 
> AdvancedPM=no
>
> * signifies the current active mode
>
># hdparm -I /dev/sdb
>
>/dev/sdb:
>
>CompactFlash ATA device, with removable media
>	Model Number:       SunDisk SDP3B-20                        
>	Serial Number:      MT302014239
>	Firmware Revision:  vcb 1.34
>Standards:
>	Likely used: 4
>Configuration:
>	Logical		max	current
>	cylinders	640	640
>	heads		2	2
>	sectors/track	32	32
>	--
>	bytes/track: 0	bytes/sector: 576
>	CHS current addressable sectors:      40960
>	LBA    user addressable sectors:      40960
>	device size with M = 1024*1024:          20 MBytes
>	device size with M = 1000*1000:          20 MBytes 
>Capabilities:
>	LBA, IORDY(may be)(cannot be disabled)
>	Buffer size: 1.0kB	bytes avail on r/w long: 4
>	Standby timer values: spec'd by Vendor
>	R/W multiple sector transfer: Max = 1	Current = 0
>	DMA: not supported
>	PIO: pio0 pio1 
>
># badblocks -b 512 -c 1 -t random -s -v -w /dev/sdb
>Checking for bad blocks in read-write mode
>From block 0 to 40960
>Testing with random pattern:               40960/          40960
>
>Pass completed, 0 bad blocks found.
>
># eject /dev/sdb
>
># pccardctl eject
>
>Script done on Tue 18 Mar 2008 03:23:06 PM EDT

Actions: View

Attachments on bug 437056: 297682 | 297688 | 298456 | 298457