Attachment 298577 Details for Bug 438235 – Network Log File

Network Log File

output.log (text/plain), 3.34 KB, created by IBM Bug Proxy on 2008-03-19 19:56:49 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: IBM Bug Proxy

Created: 2008-03-19 19:56:49 UTC

Size: 3.34 KB

patch

obsolete

>Running ./network.py:
>using test server lewis7
>ignoring interface lo
>It appears that the root file system is NFS mounted
>The test will shutdown and restore interface eth0, is this OK? (y|n) Cannot get device settings: No such device
>Cannot get wake-on-lan settings: No such device
>Cannot get message level: No such device
>Cannot get link status: No such device
>100+0 records in
>100+0 records out
>13107200 bytes (13 MB) copied, 7.0497 seconds, 1.9 MB/s
>Settings for eth0:
>	Supported ports: [ FIBRE ]
>	Supported link modes:   1000baseT/Half 1000baseT/Full 
>	Supports auto-negotiation: Yes
>	Advertised link modes:  1000baseT/Half 1000baseT/Full 
>	Advertised auto-negotiation: Yes
>	Speed: 1000Mb/s
>	Duplex: Full
>	Port: FIBRE
>	PHYAD: 1
>	Transceiver: internal
>	Auto-negotiation: on
>	Supports Wake-on: g
>	Wake-on: g
>	Current message level: 0x000000ff (255)
>	Link detected: yes
>-
>class: NETWORK
>bus: PCI
>detached: 0
>device: eth0
>driver: tg3
>desc: "Broadcom Corporation NetXtreme BCM5704S Gigabit Ethernet"
>network.hwaddr: 00:1a:64:0f:01:80
>vendorId: 14e4
>deviceId: 16a8
>subVendorId: 1014
>subDeviceId: 02a8
>pciType: 1
>pcidom:    2
>pcibus:  0
>pcidev:  1
>pcifn:  0
>-
>class: NETWORK
>bus: PCI
>detached: 0
>device: eth1
>driver: tg3
>desc: "Broadcom Corporation NetXtreme BCM5704S Gigabit Ethernet"
>network.hwaddr: 00:1a:64:0f:01:81
>vendorId: 14e4
>deviceId: 16a8
>subVendorId: 1014
>subDeviceId: 02a8
>pciType: 1
>pcidom:    2
>pcibus:  0
>pcidev:  1
>pcifn:  1
>eth0: Tigon3 [partno(none) rev 2100 PHY(serdes)] (PCIX:100MHz:64-bit) 1000Base-SX Ethernet 00:1a:64:0f:01:80
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[0] TSOcap[0]
>eth0: dma_rwctrl[769f4000] dma_mask[64-bit]
>tg3: eth0: Link is up at 1000 Mbps, full duplex.
>tg3: eth0: Flow control is off for TX and off for RX.
>TCP latency using lewis7: 1.5504 microseconds
>0.065536 69.18 MB/sec
>TCP latency using lewis7: 1.7294 microseconds
>0.065536 68.99 MB/sec
>TCP latency using lewis7: 1.6698 microseconds
>0.065536 69.12 MB/sec
>TCP latency using lewis7: 1.5502 microseconds
>0.065536 69.58 MB/sec
>TCP latency using lewis7: 1.5503 microseconds
>0.065536 69.58 MB/sec
>response: n
>Warning: Bounce of interface eth0 was not tested
>Warning: Unable to determine interface speed
>Assuming 100 Mb/s
>
>+----------eth0 info start----------+
>+-----Speed-----+
>
>+-----Kudzu-----+
>
>+-----dmesg-----+
>
>+----------eth0 info end----------+
>
>tcp test:
>test cycle 1 of 5
>testing latency...
>testing bandwidth to lewis7...
>test cycle 2 of 5
>testing latency...
>testing bandwidth to lewis7...
>test cycle 3 of 5
>testing latency...
>testing bandwidth to lewis7...
>test cycle 4 of 5
>testing latency...
>testing bandwidth to lewis7...
>test cycle 5 of 5
>testing latency...
>testing bandwidth to lewis7...
>passed
>testing udp latency to lewis7...
>Recv timed out
>passed
>testing nfs using lewis7...
>Copying 10 x 100 mbit files to/from lewis7
>mount -o rw,intr,rsize=12288,wsize=12288,udp lewis7:/var/hts/export /tmp/tmppkmsHQnfsdir
>Traceback (most recent call last):
>  File "./network.py", line 564, in ?
>    returnValue = networkTest.do(sys.argv)
>  File "/usr/share/hts/lib/hts/test.py", line 226, in do
>    return self.run()
>  File "./network.py", line 541, in run
>    returnValue = self.nfsTest()
>  File "./network.py", line 441, in nfsTest
>    os.system("rm -rf %s/%s" % (self.nfsdir, self.ipAddress))
>AttributeError: NetworkTest instance has no attribute 'ipAddress'
>...finished running ./network.py, exit code=1

Actions: View

Attachments on bug 438235: 298577 | 298578 | 298579