Attachment 298738 Details for Bug 438420 – dmesg

dmesg

dmesg (text/plain), 27.55 KB, created by Erik van Pienbroek on 2008-03-20 19:40:27 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Erik van Pienbroek

Created: 2008-03-20 19:40:27 UTC

Size: 27.55 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.25-0.121.rc5.git4.fc9 (mockbuild@) (gcc version 4.3.0 20080314 (Red Hat 4.3.0-3) (GCC) ) #1 SMP Fri Mar 14 23:14:20 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
> BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
> BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>Scan SMP from c0000000 for 1024 bytes.
>Scan SMP from c009fc00 for 1024 bytes.
>Scan SMP from c00f0000 for 65536 bytes.
>found SMP MP-table at [c00f53a0] 000f53a0
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 262128) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   262128
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   262128
>On node 0 totalpages: 262128
>  DMA zone: 56 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4040 pages, LIFO batch:0
>  Normal zone: 3080 pages used for memmap
>  Normal zone: 222200 pages, LIFO batch:31
>  HighMem zone: 447 pages used for memmap
>  HighMem zone: 32305 pages, LIFO batch:7
>  Movable zone: 0 pages used for memmap
>DMI 2.2 present.
>Using APIC driver default
>ACPI: RSDP 000F7060, 0014 (r0 IntelR)
>ACPI: RSDT 3FFF3000, 002C (r1 IntelR AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP 3FFF3040, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT 3FFF30C0, 3EEE (r1 INTELR AWRDACPI     1000 MSFT  100000D)
>ACPI: FACS 3FFF0000, 0040
>ACPI: APIC 3FFF6FC0, 0054 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:2 APIC version 20
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 258545
>Kernel command line: ro root=LABEL=/ rhgb quiet
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c081c000 soft=c07fc000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2429.953 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          48
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1024 kB
> per task-struct memory footprint: 2688 bytes
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1022460k/1048512k available (2292k kernel code, 25340k reserved, 1177k data, 576k init, 131008k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0769000 - 0xc07f9000   ( 576 kB)
>      .data : 0xc063d28c - 0xc07639f0   (1177 kB)
>      .text : 0xc0400000 - 0xc063d28c   (2292 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=12, HWalign=128, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 4866.38 BogoMIPS (lpj=2433190)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Hyper-Threading is disabled
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>checking if image is initramfs... it is
>Freeing initrd memory: 2829k freed
>ACPI: Core revision 20070126
>ACPI: Checking initramfs for custom DSDT
>CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 04
>Total of 1 processors activated (4866.38 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=608 bytes
>sizeof(dentry)=160 bytes
>sizeof(ext3inode)=860 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=6544 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000001
>  groups: 00000001
>khelper used greatest stack depth: 2828 bytes left
>net_namespace: 620 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 20:19:57  Date: 03/20/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfb0b0, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>* The chipset may have PM-Timer Bug. Due to workarounds for a bug,
>* this clock source is slow. If you are sure your timer does not have
>* this bug, please use "acpi_pm_good" to disable the workaround
>pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH4 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 14 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>ACPI: RTC can wake from S4
>Time: tsc clocksource has been installed.
>system 00:00: iomem range 0xd0000-0xd3fff has been reserved
>system 00:00: iomem range 0xdf800-0xdffff has been reserved
>system 00:00: iomem range 0xf0000-0xfbfff could not be reserved
>system 00:00: iomem range 0xfc000-0xfffff could not be reserved
>system 00:00: iomem range 0x3fff0000-0x3fffffff could not be reserved
>system 00:00: iomem range 0x0-0x9ffff could not be reserved
>system 00:00: iomem range 0x100000-0x3ffeffff could not be reserved
>system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
>system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
>system 00:00: iomem range 0xffb00000-0xffbfffff could not be reserved
>system 00:00: iomem range 0xfff00000-0xffffffff could not be reserved
>system 00:00: iomem range 0xe0000-0xeffff has been reserved
>system 00:02: ioport range 0x400-0x4bf could not be reserved
>system 00:03: ioport range 0x4d0-0x4d1 has been reserved
>system 00:03: ioport range 0x290-0x29f has been reserved
>system 00:03: ioport range 0x800-0x805 has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: 0xd8000000-0xdaffffff
>  PREFETCH window: 0x00000000c0000000-0x00000000cfffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 9000-afff
>  MEM window: 0xdb000000-0xdcffffff
>  PREFETCH window: 0x00000000dd000000-0x00000000dd0fffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1206044396.794:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:01:00.0: Boot video device
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: PNP0C0B:00 is registered as cooling_device0
>ACPI: Fan [FAN] (on)
>ACPI: ACPI0007:00 is registered as cooling_device1
>ACPI: Processor [CPU0] (supports 2 throttling states)
>ACPI: LNXTHERM:01 is registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (40 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>agpgart: Detected an Intel 845G Chipset.
>agpgart: AGP aperture is 128M @ 0xd0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>Switched to high resolution mode on CPU 0
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 0:876:346
>  hash matches device tty63
>Freeing unused kernel memory: 576k freed
>Write protecting the kernel read-only data: 940k
>logips2pp: Detected unknown logitech mouse model 63
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdd100000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25-0.121.rc5.git4.fc9 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
>modprobe used greatest stack depth: 2120 bytes left
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000b800
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25-0.121.rc5.git4.fc9 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25-0.121.rc5.git4.fc9 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25-0.121.rc5.git4.fc9 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>modprobe used greatest stack depth: 2068 bytes left
>input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input2
>SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
>SGI XFS Quota Management subsystem
>SCSI subsystem initialized
>libata version 3.00 loaded.
>sata_sil 0000:02:05.0: version 2.3
>ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 18 (level, low) -> IRQ 18
>scsi0 : sata_sil
>scsi1 : sata_sil
>ata1: SATA max UDMA/100 mmio m512@0xdc001000 tf 0xdc001080 irq 18
>ata2: SATA max UDMA/100 mmio m512@0xdc001000 tf 0xdc0010c0 irq 18
>ata1: SATA link down (SStatus 0 SControl 310)
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata2.00: ATA-7: Maxtor 6Y120M0, YAR51EW0, max UDMA/133
>ata2.00: 240121728 sectors, multi 16: LBA 
>ata2.00: configured for UDMA/100
>scsi 1:0:0:0: Direct-Access     ATA      Maxtor 6Y120M0   YAR5 PQ: 0 ANSI: 5
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
>ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
>ata3.01: ATAPI: LITE-ON DVDRW SHM-165P6S, MS0P, max UDMA/66
>ata3.01: limited to UDMA/33 due to 40-wire cable
>ata3.01: configured for UDMA/33
>ata4.00: ATA-5: MAXTOR 4K020H1, A08.1500, max UDMA/100
>ata4.00: 39876480 sectors, multi 16: LBA 
>ata4.00: configured for UDMA/100
>scsi 2:0:1:0: CD-ROM            LITE-ON  DVDRW SHM-165P6S MS0P PQ: 0 ANSI: 5
>scsi 3:0:0:0: Direct-Access     ATA      MAXTOR 4K020H1   A08. PQ: 0 ANSI: 5
>modprobe used greatest stack depth: 1944 bytes left
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>Driver 'sd' needs updating - please use bus_type methods
>sd 1:0:0:0: [sda] 240121728 512-byte hardware sectors (122942 MB)
>sd 1:0:0:0: [sda] Write Protect is off
>sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sda] 240121728 512-byte hardware sectors (122942 MB)
>sd 1:0:0:0: [sda] Write Protect is off
>sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 1:0:0:0: [sda] Attached SCSI disk
>sd 3:0:0:0: [sdb] 39876480 512-byte hardware sectors (20417 MB)
>sd 3:0:0:0: [sdb] Write Protect is off
>sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:0:0: [sdb] 39876480 512-byte hardware sectors (20417 MB)
>sd 3:0:0:0: [sdb] Write Protect is off
>sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 3:0:0:0: [sdb] Attached SCSI disk
>modprobe used greatest stack depth: 1596 bytes left
>Filesystem "dm-3": Disabling barriers, not supported by the underlying device
>XFS mounting filesystem dm-3
>Ending clean XFS mount for filesystem: dm-3
>SELinux:8192 avtab hash slots allocated. Num of rules:155005
>SELinux:8192 avtab hash slots allocated. Num of rules:155005
>security:  8 users, 12 roles, 2274 types, 110 bools, 1 sens, 1024 cats
>security:  72 classes, 155005 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-3, type xfs), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>type=1403 audit(1206044407.664:2): policy loaded auid=4294967295 ses=4294967295
>sd 1:0:0:0: Attached scsi generic sg0 type 0
>scsi 2:0:1:0: Attached scsi generic sg1 type 5
>sd 3:0:0:0: Attached scsi generic sg2 type 0
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 2:0:1:0: Attached scsi CD-ROM sr0
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
>ACPI: Sleep Button (CM) [SLPB]
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x0460)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>intel_rng: FWH not detected
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
>8139too Fast Ethernet driver 0.9.28
>ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 16
>eth0: RealTek RTL8139 at 0xf89c2000, 00:05:1c:13:a4:09, IRQ 16
>eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
>ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 22 (level, low) -> IRQ 22
>eth1: RealTek RTL8139 at 0xf89c4000, 00:50:70:52:00:7d, IRQ 22
>eth1:  Identified 8139 chip type 'RTL-8100B/8139D'
>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>input: PC Speaker as /devices/platform/pcspkr/input/input6
>Linux video capture interface: v2.00
>bttv: driver version 0.9.17 loaded
>bttv: using 8 buffers with 2080k (520 pages) each for capture
>bttv: Bt8xx card found (0).
>ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 22 (level, low) -> IRQ 22
>bttv0: Bt878 (rev 2) at 0000:02:03.0, irq: 22, latency: 32, mmio: 0xdd000000
>bttv0: detected: (Askey Magic/others) TView99 CPH061/06L (T1/LC) [card=24], PCI subsystem ID is 144f:3005
>bttv0: using: Askey CPH05X/06X (bt878) [many vendors] [card=24,autodetected]
>bttv0: gpio: en=00000000, out=00000000 in=00ffefff [init]
>bttv0: tuner type=5
>bttv0: i2c: checking for MSP34xx @ 0x80... not found
>bttv0: i2c: checking for TDA9875 @ 0xb0... not found
>bttv0: i2c: checking for TDA7432 @ 0x8a... not found
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>parport_pc 00:0b: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
>All bytes are equal. It is not a TEA5767
>tuner' 1-0060: chip found @ 0xc0 (bt878 #0 [sw])
>tuner-simple 1-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
>bttv0: registered device video0
>bttv0: registered device vbi0
>bttv0: PLL: 28636363 => 35468950 .. ok
>input: bttv IR (card=24) as /devices/pci0000:00/0000:00:1e.0/0000:02:03.0/input/input7
>ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 18 (level, low) -> IRQ 18
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>device-mapper: multipath: version 1.0.5 loaded
>
>=======================================================
>[ INFO: possible circular locking dependency detected ]
>2.6.25-0.121.rc5.git4.fc9 #1
>-------------------------------------------------------
>kpartx/1413 is trying to acquire lock:
> (&md->suspend_lock){--..}, at: [<f88aa702>] dm_swap_table+0x1b/0x15b [dm_mod]
>
>but task is already holding lock:
> (&type->s_umount_key#17){----}, at: [<c048974c>] get_super+0x42/0x87
>
>which lock already depends on the new lock.
>
>
>the existing dependency chain (in reverse order) is:
>
>-> #1 (&type->s_umount_key#17){----}:
>       [<c0445774>] __lock_acquire+0xa99/0xc11
>       [<c0445956>] lock_acquire+0x6a/0x90
>       [<c063857c>] down_read+0x30/0x6a
>       [<c048974c>] get_super+0x42/0x87
>       [<c04a571d>] freeze_bdev+0x30/0x7b
>       [<f88ab6d6>] dm_suspend+0xda/0x253 [dm_mod]
>       [<f88ae3da>] dev_suspend+0xe0/0x165 [dm_mod]
>       [<f88aeb97>] dm_ctl_ioctl+0x18e/0x1cc [dm_mod]
>       [<c04928ba>] vfs_ioctl+0x22/0x69
>       [<c0492b3a>] do_vfs_ioctl+0x239/0x24c
>       [<c0492b8d>] sys_ioctl+0x40/0x5b
>       [<c0405d12>] syscall_call+0x7/0xb
>       [<ffffffff>] 0xffffffff
>
>-> #0 (&md->suspend_lock){--..}:
>       [<c0445693>] __lock_acquire+0x9b8/0xc11
>       [<c0445956>] lock_acquire+0x6a/0x90
>       [<c0637e09>] mutex_lock_nested+0xdb/0x271
>       [<f88aa702>] dm_swap_table+0x1b/0x15b [dm_mod]
>       [<f88ae3e4>] dev_suspend+0xea/0x165 [dm_mod]
>       [<f88aeb97>] dm_ctl_ioctl+0x18e/0x1cc [dm_mod]
>       [<c04928ba>] vfs_ioctl+0x22/0x69
>       [<c0492b3a>] do_vfs_ioctl+0x239/0x24c
>       [<c0492b8d>] sys_ioctl+0x40/0x5b
>       [<c0405d12>] syscall_call+0x7/0xb
>       [<ffffffff>] 0xffffffff
>
>other info that might help us debug this:
>
>1 lock held by kpartx/1413:
> #0:  (&type->s_umount_key#17){----}, at: [<c048974c>] get_super+0x42/0x87
>
>stack backtrace:
>Pid: 1413, comm: kpartx Not tainted 2.6.25-0.121.rc5.git4.fc9 #1
> [<c0444ac5>] print_circular_bug_tail+0x5b/0x66
> [<c04449e8>] ? print_circular_bug_header+0xa6/0xb1
> [<c0445693>] __lock_acquire+0x9b8/0xc11
> [<c0445956>] lock_acquire+0x6a/0x90
> [<f88aa702>] ? dm_swap_table+0x1b/0x15b [dm_mod]
> [<c0637e09>] mutex_lock_nested+0xdb/0x271
> [<f88aa702>] ? dm_swap_table+0x1b/0x15b [dm_mod]
> [<f88aa702>] ? dm_swap_table+0x1b/0x15b [dm_mod]
> [<f88aa702>] dm_swap_table+0x1b/0x15b [dm_mod]
> [<c0422411>] ? default_wake_function+0x0/0xd
> [<f88ae3e4>] dev_suspend+0xea/0x165 [dm_mod]
> [<f88aeb97>] dm_ctl_ioctl+0x18e/0x1cc [dm_mod]
> [<f88ae2fa>] ? dev_suspend+0x0/0x165 [dm_mod]
> [<f88aea09>] ? dm_ctl_ioctl+0x0/0x1cc [dm_mod]
> [<c04928ba>] vfs_ioctl+0x22/0x69
> [<c0492b3a>] do_vfs_ioctl+0x239/0x24c
> [<c04d8671>] ? selinux_file_ioctl+0xa8/0xab
> [<c0492b8d>] sys_ioctl+0x40/0x5b
> [<c0405d12>] syscall_call+0x7/0xb
> =======================
>Filesystem "dm-3": Disabling barriers, not supported by the underlying device
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdb1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>dd used greatest stack depth: 1100 bytes left
>Adding 522104k swap on /dev/mapper/pdc_gagccgcgp2.  Priority:-1 extents:1 across:522104k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>sm-notify used greatest stack depth: 964 bytes left
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>fuse init (API version 7.9)
>SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>SELinux: initialized (dev 0:16, type nfs), uses genfs_contexts
>SELinux: initialized (dev 0:17, type nfs), uses genfs_contexts
>SELinux: initialized (dev 0:18, type nfs), uses genfs_contexts
>SELinux: initialized (dev 0:19, type nfs), uses genfs_contexts
>SELinux: initialized (dev 0:1a, type nfs), uses genfs_contexts
>touch used greatest stack depth: 792 bytes left
>it87: Found IT8712F chip at 0x290, revision 5
>it87 it87.656: Detected broken BIOS defaults, disabling PWM interface
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>eth0: no IPv6 routers present
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period
>SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
>SELinux: initialized (dev fuse, type fuse), uses genfs_contexts

Actions: View

Attachments on bug 438420: 298738