Attachment 298756 Details for Bug 438448 – scsconfig.log for IBM ThinkPad T23

scsconfig.log for IBM ThinkPad T23

scsconfig.log (text/plain), 41.65 KB, created by Joachim Frieben on 2008-03-20 23:05:35 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Joachim Frieben

Created: 2008-03-20 23:05:35 UTC

Size: 41.65 KB

patch

obsolete

>------- System Config Soundcard Log --------
>Thu Mar 20 23:47:48 CET 2008
>
>------- lspci --------
>00:00.0 Host bridge: Intel Corporation 82830 830 Chipset Host Bridge (rev 02)
>00:01.0 PCI bridge: Intel Corporation 82830 830 Chipset AGP Bridge (rev 02)
>00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB Controller #1 (rev 01)
>00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB Controller #2 (rev 01)
>00:1d.2 USB Controller: Intel Corporation 82801CA/CAM USB Controller #3 (rev 01)
>00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 41)
>00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 01)
>00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 Controller (rev 01)
>00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 01)
>00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 01)
>01:00.0 VGA compatible controller: S3 Inc. SuperSavage IX/C SDR (rev 05)
>02:00.0 CardBus bridge: Texas Instruments PCI1420 PC card Cardbus Controller
>02:00.1 CardBus bridge: Texas Instruments PCI1420 PC card Cardbus Controller
>02:02.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 0c)
>02:02.1 Serial controller: Agere Systems LT WinModem (rev 01)
>
>------- lspci -vn --------
>00:00.0 0600: 8086:3575 (rev 02)
>	Subsystem: 1014:021d
>	Flags: bus master, fast devsel, latency 0
>	Memory at d0000000 (32-bit, prefetchable) [size=256M]
>	Capabilities: [40] Vendor Specific Information <?>
>	Capabilities: [a0] AGP version 2.0
>	Kernel driver in use: agpgart-intel
>
>00:01.0 0604: 8086:3576 (rev 02) (prog-if 00 [Normal decode])
>	Flags: bus master, 66MHz, fast devsel, latency 96
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
>	Memory behind bridge: c0100000-c01fffff
>	Prefetchable memory behind bridge: e0000000-ebffffff
>
>00:1d.0 0c03: 8086:2482 (rev 01) (prog-if 00 [UHCI])
>	Subsystem: 1014:0220
>	Flags: bus master, medium devsel, latency 0, IRQ 11
>	I/O ports at 1800 [size=32]
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>
>00:1d.1 0c03: 8086:2484 (rev 01) (prog-if 00 [UHCI])
>	Subsystem: 1014:0220
>	Flags: bus master, medium devsel, latency 0, IRQ 11
>	I/O ports at 1820 [size=32]
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>
>00:1d.2 0c03: 8086:2487 (rev 01) (prog-if 00 [UHCI])
>	Subsystem: 1014:0220
>	Flags: bus master, medium devsel, latency 0, IRQ 11
>	I/O ports at 1840 [size=32]
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>
>00:1e.0 0604: 8086:2448 (rev 41) (prog-if 00 [Normal decode])
>	Flags: bus master, fast devsel, latency 0
>	Bus: primary=00, secondary=02, subordinate=08, sec-latency=64
>	I/O behind bridge: 00002000-00006fff
>	Memory behind bridge: c0200000-cfffffff
>	Prefetchable memory behind bridge: f0000000-f7ffffff
>
>00:1f.0 0601: 8086:248c (rev 01)
>	Flags: bus master, medium devsel, latency 0
>	Kernel modules: iTCO_wdt, intel-rng
>
>00:1f.1 0101: 8086:248a (rev 01) (prog-if 8a [Master SecP PriP])
>	Subsystem: 1014:0220
>	Flags: bus master, medium devsel, latency 0, IRQ 11
>	I/O ports at 01f0 [size=8]
>	I/O ports at 03f4 [size=1]
>	I/O ports at 0170 [size=8]
>	I/O ports at 0374 [size=1]
>	I/O ports at 1860 [size=16]
>	Memory at 30000000 (32-bit, non-prefetchable) [size=1K]
>	Kernel driver in use: ata_piix
>	Kernel modules: ata_piix
>
>00:1f.3 0c05: 8086:2483 (rev 01)
>	Subsystem: 1014:0220
>	Flags: medium devsel, IRQ 11
>	I/O ports at 1880 [size=32]
>	Kernel driver in use: i801_smbus
>	Kernel modules: i2c-i801
>
>00:1f.5 0401: 8086:2485 (rev 01)
>	Subsystem: 1014:0222
>	Flags: bus master, medium devsel, latency 0, IRQ 11
>	I/O ports at 1c00 [size=256]
>	I/O ports at 18c0 [size=64]
>	Kernel driver in use: Intel ICH
>	Kernel modules: snd-intel8x0
>
>01:00.0 0300: 5333:8c2e (rev 05) (prog-if 00 [VGA controller])
>	Subsystem: 1014:01fc
>	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11
>	Memory at c0100000 (32-bit, non-prefetchable) [size=512K]
>	Memory at e8000000 (32-bit, prefetchable) [size=64M]
>	Memory at e4000000 (32-bit, prefetchable) [size=64M]
>	Memory at e0000000 (32-bit, prefetchable) [size=32M]
>	Capabilities: [dc] Power Management version 2
>	Capabilities: [80] AGP version 2.0
>	Kernel modules: savagefb
>
>02:00.0 0607: 104c:ac51
>	Subsystem: 1014:023b
>	Flags: bus master, medium devsel, latency 168, IRQ 11
>	Memory at 50000000 (32-bit, non-prefetchable) [size=4K]
>	Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
>	Memory window 0: f0000000-f3fff000 (prefetchable)
>	Memory window 1: c4000000-c7fff000
>	I/O window 0: 00002000-000020ff
>	I/O window 1: 00002400-000024ff
>	16-bit legacy interface ports at 0001
>	Kernel driver in use: yenta_cardbus
>
>02:00.1 0607: 104c:ac51
>	Subsystem: 1014:023b
>	Flags: bus master, medium devsel, latency 168, IRQ 11
>	Memory at 51000000 (32-bit, non-prefetchable) [size=4K]
>	Bus: primary=02, secondary=07, subordinate=07, sec-latency=176
>	Memory window 0: f4000000-f7fff000 (prefetchable)
>	Memory window 1: c8000000-cbfff000
>	I/O window 0: 00002800-000028ff
>	I/O window 1: 00002c00-00002cff
>	16-bit legacy interface ports at 0001
>	Kernel driver in use: yenta_cardbus
>
>02:02.0 0200: 8086:1229 (rev 0c)
>	Subsystem: 8086:2205
>	Flags: bus master, medium devsel, latency 66, IRQ 11
>	Memory at c0220000 (32-bit, non-prefetchable) [size=4K]
>	I/O ports at 6000 [size=64]
>	Memory at c0200000 (32-bit, non-prefetchable) [size=128K]
>	Capabilities: [dc] Power Management version 2
>	Kernel driver in use: e100
>	Kernel modules: e100
>
>02:02.1 0700: 11c1:045c (rev 01) (prog-if 00 [8250])
>	Subsystem: 8086:2205
>	Flags: medium devsel, IRQ 11
>	I/O ports at 6040 [size=8]
>	Memory at c0221000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [dc] Power Management version 2
>	Kernel driver in use: serial
>
>------- lsmod --------
>Module                  Size  Used by
>rfcomm                 35872  0 
>l2cap                  22544  9 rfcomm
>bluetooth              48932  4 rfcomm,l2cap
>autofs4                20636  2 
>sunrpc                155780  3 
>ipt_REJECT              6784  2 
>xt_tcpudp               6656  1 
>nf_conntrack_ipv4      11396  2 
>xt_state                5888  2 
>nf_conntrack           51264  2 nf_conntrack_ipv4,xt_state
>iptable_filter          6528  1 
>ip_tables              13840  1 iptable_filter
>ip6table_filter         6400  0 
>ip6_tables             14736  1 ip6table_filter
>x_tables               15380  5 ipt_REJECT,xt_tcpudp,xt_state,ip_tables,ip6_tables
>ipv6                  227916  14 
>loop                   16916  0 
>dm_multipath           18600  0 
>snd_usb_audio          78472  0 
>snd_usb_lib            18064  1 snd_usb_audio
>snd_rawmidi            22416  1 snd_usb_lib
>snd_hwdep              10764  1 snd_usb_audio
>snd_intel8x0           30500  3 
>snd_ac97_codec         95424  1 snd_intel8x0
>ac97_bus                5504  1 snd_ac97_codec
>snd_seq_dummy           6660  0 
>nsc_ircc               17816  0 
>irda                   99260  1 nsc_ircc
>snd_seq_oss            30628  0 
>crc_ccitt               5760  1 irda
>parport_pc             25488  0 
>snd_seq_midi_event      9736  1 snd_seq_oss
>parport                32480  1 parport_pc
>snd_seq                49296  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
>snd_seq_device         10260  4 snd_rawmidi,snd_seq_dummy,snd_seq_oss,snd_seq
>snd_pcm_oss            42504  0 
>snd_mixer_oss          16904  1 snd_pcm_oss
>floppy                 53796  0 
>snd_pcm                67116  4 snd_usb_audio,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
>e100                   33588  0 
>mii                     8192  1 e100
>pcspkr                  6272  0 
>snd_timer              21916  2 snd_seq,snd_pcm
>i2c_i801               12304  0 
>snd                    49380  20 snd_usb_audio,snd_usb_lib,snd_rawmidi,snd_hwdep,snd_intel8x0,snd_ac97_codec,snd_seq_dummy,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
>iTCO_wdt               13640  0 
>i2c_core               20880  1 i2c_i801
>iTCO_vendor_support     6916  1 iTCO_wdt
>soundcore               9284  1 snd
>snd_page_alloc         11528  2 snd_intel8x0,snd_pcm
>battery                14348  0 
>ac                      8068  0 
>button                 10000  0 
>sg                     31912  0 
>sr_mod                 17316  0 
>cdrom                  32796  1 sr_mod
>dm_snapshot            19080  0 
>dm_zero                 5632  0 
>dm_mirror              26800  0 
>dm_mod                 50864  13 dm_multipath,dm_snapshot,dm_zero,dm_mirror
>ata_generic             8964  0 
>pata_acpi               8192  0 
>ata_piix               19972  2 
>libata                127636  3 ata_generic,pata_acpi,ata_piix
>sd_mod                 25984  3 
>scsi_mod              122868  4 sg,sr_mod,libata,sd_mod
>ext3                  109360  4 
>jbd                    43092  1 ext3
>mbcache                10240  1 ext3
>uhci_hcd               23064  0 
>ohci_hcd               22292  0 
>ehci_hcd               32148  0 
>
>------- /etc/modprobe.conf --------
>alias eth0 e100
>alias wlan0 ndiswrapper
>options snd cards_limit=8
>alias snd-card-0 snd-intel8x0
>options snd-intel8x0 index=0
>alias snd-card-7 snd-usb-audio
>options snd-usb-audio index=7
>
>------- /etc/asound.conf --------
>#Generated by system-config-soundcard
>#If you edit this file, don't run system-config-soundcard,
>#all your changes here could be lost.
>#SWCONF
>#DEV 0
>defaults.pcm.card 0
>defaults.pcm.device 0
>defaults.ctl.card 0
>
>------- aplay -l --------
>**** List of PLAYBACK Hardware Devices ****
>card 0: I82801CAICH3 [Intel 82801CA-ICH3], device 0: Intel ICH [Intel 82801CA-ICH3]
>  Subdevices: 1/1
>  Subdevice #0: subdevice #0
>
>------- amixer --------
>Simple mixer control 'Master',0
>  Capabilities: pvolume pswitch pswitch-joined
>  Playback channels: Front Left - Front Right
>  Limits: Playback 0 - 65536
>  Mono:
>  Front Left: Playback 42650 [65%] [on]
>  Front Right: Playback 42650 [65%] [on]
>Simple mixer control 'Capture',0
>  Capabilities: cvolume cswitch cswitch-joined
>  Capture channels: Front Left - Front Right
>  Limits: Capture 0 - 65536
>  Front Left: Capture 0 [0%] [on]
>  Front Right: Capture 0 [0%] [on]
>
>------- /proc/asound/version --------
>Advanced Linux Sound Architecture Driver Version 1.0.16rc2 (Thu Jan 31 16:40:16 2008 UTC).
>
>------- rpm -q alsa-lib --------
>alsa-lib-1.0.16-2.fc9.i386
>
>------- rpm -q alsa-utils --------
>alsa-utils-1.0.16-2.fc9.i386
>
>------- /proc/asound/modules --------
> 0 snd_intel8x0
>
>------- /proc/asound/pcm --------
>00-01: Intel ICH - MIC ADC : Intel 82801CA-ICH3 - MIC ADC : capture 1
>00-00: Intel ICH : Intel 82801CA-ICH3 : playback 1 : capture 1
>
>------- /etc/sysconfig/hwconf --------
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "Intel Corporation 82830 830 Chipset Host Bridge"
>vendorId: 8086
>deviceId: 3575
>subVendorId: 1014
>subDeviceId: 021d
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  0
>pcifn:  0
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "Intel Corporation 82830 830 Chipset AGP Bridge"
>vendorId: 8086
>deviceId: 3576
>subVendorId: 0000
>subDeviceId: 0000
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  1
>pcifn:  0
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "Intel Corporation 82801 Mobile PCI Bridge"
>vendorId: 8086
>deviceId: 2448
>subVendorId: 0000
>subDeviceId: 0000
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1e
>pcifn:  0
>-
>class: OTHER
>bus: PCI
>detached: 0
>driver: intel-rng
>desc: "Intel Corporation 82801CAM ISA Bridge (LPC)"
>vendorId: 8086
>deviceId: 248c
>subVendorId: 0000
>subDeviceId: 0000
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1f
>pcifn:  0
>-
>class: OTHER
>bus: PCI
>detached: 0
>driver: i2c-i801
>desc: "Intel Corporation 82801CA/CAM SMBus Controller"
>vendorId: 8086
>deviceId: 2483
>subVendorId: 1014
>subDeviceId: 0220
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1f
>pcifn:  3
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Atheros Communications Inc USB WLAN Device"
>usbclass: 255
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 1
>usblevel: 1
>usbport: 0
>usbdev: 2
>vendorId: 2001
>deviceId: 3a03
>usbmfr: Atheros Communications Inc
>usbprod: USB WLAN Device
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>driver: nsc-ircc
>desc: "IBM0071"
>deviceId: IBM0071
>compat: PNP0511
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "IBM3780"
>deviceId: IBM3780
>compat: PNP0f13
>-
>class: OTHER
>bus: PSAUX
>detached: 0
>desc: "Lid Switch"
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.25-0.101.rc4.git3.fc9 uhci_hcd UHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 3
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 1d6b
>deviceId: 0001
>usbmfr: Linux 2.6.25-0.101.rc4.git3.fc9 uhci_hcd
>usbprod: UHCI Host Controller
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.25-0.101.rc4.git3.fc9 uhci_hcd UHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 2
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 1d6b
>deviceId: 0001
>usbmfr: Linux 2.6.25-0.101.rc4.git3.fc9 uhci_hcd
>usbprod: UHCI Host Controller
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.25-0.101.rc4.git3.fc9 uhci_hcd UHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 1
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 1d6b
>deviceId: 0001
>usbmfr: Linux 2.6.25-0.101.rc4.git3.fc9 uhci_hcd
>usbprod: UHCI Host Controller
>-
>class: OTHER
>bus: PSAUX
>detached: 0
>driver: pcspkr
>desc: "PC Speaker"
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0200"
>deviceId: PNP0200
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0303"
>deviceId: PNP0303
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>driver: parport_pc
>desc: "PNP0400"
>deviceId: PNP0400
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0501"
>deviceId: PNP0501
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0700"
>deviceId: PNP0700
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0800"
>deviceId: PNP0800
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0a03"
>deviceId: PNP0a03
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0b00"
>deviceId: PNP0b00
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0c01"
>deviceId: PNP0c01
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0c02"
>deviceId: PNP0c02
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0c04"
>deviceId: PNP0c04
>-
>class: OTHER
>bus: PSAUX
>detached: 0
>desc: "Power Button (FF)"
>-
>class: OTHER
>bus: PSAUX
>detached: 0
>desc: "Sleep Button (CM)"
>-
>class: MOUSE
>bus: PSAUX
>detached: 0
>device: input/mice
>driver: generic3ps/2
>desc: "Macintosh mouse button emulation"
>-
>class: MOUSE
>bus: PSAUX
>detached: 0
>device: input/mice
>driver: generic3ps/2
>desc: "PS/2 Logitech Mouse"
>-
>class: AUDIO
>bus: PCI
>detached: 0
>driver: snd-intel8x0
>desc: "Intel Corporation 82801CA/CAM AC'97 Audio Controller"
>vendorId: 8086
>deviceId: 2485
>subVendorId: 1014
>subDeviceId: 0222
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1f
>pcifn:  5
>-
>class: CDROM
>bus: SCSI
>detached: 0
>desc: "MATSHITA DVD-RAM UJ-830S"
>host: 1
>id: 0
>channel: 0
>lun: 0
>-
>class: MODEM
>bus: PCI
>detached: 0
>desc: "Agere Systems LT WinModem"
>vendorId: 11c1
>deviceId: 045c
>subVendorId: 8086
>subDeviceId: 2205
>pciType: 1
>pcidom:    0
>pcibus:  2
>pcidev:  2
>pcifn:  1
>-
>class: VIDEO
>bus: PCI
>detached: 0
>driver: savagefb
>desc: "S3 Inc. SuperSavage IX/C SDR"
>video.xdriver: savage
>vendorId: 5333
>deviceId: 8c2e
>subVendorId: 1014
>subDeviceId: 01fc
>pciType: 1
>pcidom:    0
>pcibus:  1
>pcidev:  0
>pcifn:  0
>-
>class: FLOPPY
>bus: MISC
>detached: 1
>device: fd0
>desc: "3.5" 1.44MB floppy drive"
>-
>class: HD
>bus: SCSI
>detached: 0
>desc: "ATA IC25N040ATCS04-0"
>host: 0
>id: 0
>channel: 0
>lun: 0
>-
>class: KEYBOARD
>bus: PSAUX
>detached: 0
>desc: "AT Translated Set 2 keyboard"
>-
>class: USB
>bus: PCI
>detached: 0
>driver: uhci-hcd
>desc: "Intel Corporation 82801CA/CAM USB Controller #1"
>vendorId: 8086
>deviceId: 2482
>subVendorId: 1014
>subDeviceId: 0220
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1d
>pcifn:  0
>-
>class: USB
>bus: PCI
>detached: 0
>driver: uhci-hcd
>desc: "Intel Corporation 82801CA/CAM USB Controller #2"
>vendorId: 8086
>deviceId: 2484
>subVendorId: 1014
>subDeviceId: 0220
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1d
>pcifn:  1
>-
>class: USB
>bus: PCI
>detached: 0
>driver: uhci-hcd
>desc: "Intel Corporation 82801CA/CAM USB Controller #3"
>vendorId: 8086
>deviceId: 2487
>subVendorId: 1014
>subDeviceId: 0220
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1d
>pcifn:  2
>-
>class: SOCKET
>bus: PCI
>detached: 0
>driver: yenta_socket
>desc: "Texas Instruments PCI1420 PC card Cardbus Controller"
>vendorId: 104c
>deviceId: ac51
>subVendorId: 1014
>subDeviceId: 023b
>pciType: 1
>pcidom:    0
>pcibus:  2
>pcidev:  0
>pcifn:  0
>-
>class: SOCKET
>bus: PCI
>detached: 0
>driver: yenta_socket
>desc: "Texas Instruments PCI1420 PC card Cardbus Controller"
>vendorId: 104c
>deviceId: ac51
>subVendorId: 1014
>subDeviceId: 023b
>pciType: 1
>pcidom:    0
>pcibus:  2
>pcidev:  0
>pcifn:  1
>-
>class: IDE
>bus: PCI
>detached: 0
>driver: ata_piix
>desc: "Intel Corporation 82801CAM IDE U100 Controller"
>vendorId: 8086
>deviceId: 248a
>subVendorId: 1014
>subDeviceId: 0220
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1f
>pcifn:  1
>
>------- dmesg --------
>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.25-0.130.rc6.git3.fc9 (mockbuild@) (gcc version 4.3.0 20080314 (Red Hat 4.3.0-3) (GCC) ) #1 SMP Wed Mar 19 17:42:55 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001ff70000 (usable)
> BIOS-e820: 000000001ff70000 - 000000001ff7e000 (ACPI data)
> BIOS-e820: 000000001ff7e000 - 000000001ff80000 (ACPI NVS)
> BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)
> BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>511MB LOWMEM available.
>Scan SMP from c0000000 for 1024 bytes.
>Scan SMP from c009fc00 for 1024 bytes.
>Scan SMP from c00f0000 for 65536 bytes.
>Scan SMP from c009f000 for 1024 bytes.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 130928) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   130928
>  HighMem    130928 ->   130928
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   130928
>On node 0 totalpages: 130928
>  DMA zone: 56 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4040 pages, LIFO batch:0
>  Normal zone: 1734 pages used for memmap
>  Normal zone: 125098 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>DMI present.
>Using APIC driver default
>ACPI: RSDP 000F7450, 0024 (r2 IBM   )
>ACPI: XSDT 1FF73AF2, 0044 (r1 IBM    TP-1A        1200  LTP        0)
>ACPI: FACP 1FF73C00, 0081 (r1 IBM    TP-1A        1200 IBM         1)
>ACPI: DSDT 1FF73CE7, A1EA (r1 IBM    TP-1A        1200 MSFT  100000D)
>ACPI: FACS 1FF7F000, 0040
>ACPI: SSDT 1FF73CB4, 0033 (r1 IBM    TP-1A        1200 MSFT  100000D)
>ACPI: ECDT 1FF7DED1, 0052 (r1 IBM    TP-1A        1200 IBM         1)
>ACPI: BOOT 1FF7DFD8, 0028 (r1 IBM    TP-1A        1200  LTP        1)
>ACPI: PM-Timer IO Port: 0x1008
>Allocating PCI resources starting at 30000000 (gap: 20000000:df800000)
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
>PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129138
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 sda=5168,240,63 rhgb quiet vga=791
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffb000 (01758000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c081f000 soft=c07ff000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Detected 1199.012 MHz processor.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          48
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1024 kB
> per task-struct memory footprint: 2688 bytes
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 505044k/523712k available (2303k kernel code, 18088k reserved, 1179k data, 576k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xe0800000 - 0xff3fe000   ( 491 MB)
>    lowmem  : 0xc0000000 - 0xdff70000   ( 511 MB)
>      .init : 0xc076c000 - 0xc07fc000   ( 576 kB)
>      .data : 0xc063fcf4 - 0xc07669f0   (1179 kB)
>      .text : 0xc0400000 - 0xc063fcf4   (2303 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=12, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 2401.84 BogoMIPS (lpj=1200922)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 512K
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>ACPI: Core revision 20070126
>ACPI: setting ELCR to 0200 (from 0800)
>CPU0: Intel Mobile Intel(R) Pentium(R) III CPU - M  1200MHz stepping 04
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=608 bytes
>sizeof(dentry)=160 bytes
>sizeof(ext3inode)=860 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=6544 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000001
>  groups: 00000001
>khelper used greatest stack depth: 2964 bytes left
>net_namespace: 620 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 23:40:48  Date: 03/20/08
>NET: Registered protocol family 16
>ACPI: ACPI Dock Station Driver 
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd8fe, last bus=8
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: EC description table is found, configuring boot EC
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in poll mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: Power Resource [PUBS] (on)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnpacpi: exceeded the max number of mem resources. Max:12 Found:12
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>ACPI: RTC can wake from S4
>system 00:00: iomem range 0x0-0x9ffff could not be reserved
>system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
>system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
>system 00:00: iomem range 0xc8000-0xcbfff could not be reserved
>system 00:00: iomem range 0xcc000-0xcffff could not be reserved
>system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
>system 00:00: iomem range 0x0-0x0 could not be reserved
>system 00:00: iomem range 0x0-0x0 could not be reserved
>system 00:00: iomem range 0xdc000-0xdffff has been reserved
>system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
>system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
>system 00:00: iomem range 0xe8000-0xebfff could not be reserved
>system 00:02: ioport range 0x1000-0x107f has been reserved
>system 00:02: ioport range 0x1180-0x11bf has been reserved
>Time: tsc clocksource has been installed.
>system 00:02: ioport range 0x15e0-0x15ef has been reserved
>system 00:02: ioport range 0x1600-0x167f has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: 0xc0100000-0xc01fffff
>  PREFETCH window: 0x00000000e0000000-0x00000000ebffffff
>PCI: Bus 3, cardbus bridge: 0000:02:00.0
>  IO window: 0x00002000-0x000020ff
>  IO window: 0x00002400-0x000024ff
>  PREFETCH window: 0xf0000000-0xf3ffffff
>  MEM window: 0xc4000000-0xc7ffffff
>PCI: Bus 7, cardbus bridge: 0000:02:00.1
>  IO window: 0x00002800-0x000028ff
>  IO window: 0x00002c00-0x00002cff
>  PREFETCH window: 0xf4000000-0xf7ffffff
>  MEM window: 0xc8000000-0xcbffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 2000-6fff
>  MEM window: 0xc0200000-0xcfffffff
>  PREFETCH window: 0x00000000f0000000-0x00000000f7ffffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 16384 (order: 7, 589824 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>checking if image is initramfs... it is
>Switched to high resolution mode on CPU 0
>Freeing initrd memory: 3214k freed
>khelper used greatest stack depth: 2828 bytes left
>Simple Boot Flag at 0x35 set to 0x1
>speedstep: frequency transition measured seems out of range (4800 nSec), falling back to a safe one of 500000 nSec.
>IBM machine detected. Enabling interrupts during APM calls.
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1206056449.048:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:01:00.0: Boot video device
>pci 0000:02:02.0: Firmware left e100 interrupts enabled; disabling
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>vesafb: framebuffer at 0xe8000000, mapped to 0xe0880000, using 3072k, total 15168k
>vesafb: mode is 1024x768x16, linelength=2048, pages=9
>vesafb: protected mode interface info at c000:9868
>vesafb: pmi: set display start = c00c98ca, set palette = c00c9913
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>fbcon: VESA VGA (fb0) is primary device
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: LNXTHERM:01 is registered as thermal_zone0
>ACPI: Thermal Zone [THM0] (63 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>agpgart: Detected an Intel 830M Chipset.
>agpgart: AGP aperture is 256M @ 0xd0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial 00:0a: activated
>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:02:02.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>Yenta: CardBus bridge found at 0000:02:00.0 [1014:023b]
>Yenta: Using INTVAL to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:02:00.0, mfunc 0x01d21022, devctl 0x64
>Yenta: ISA IRQ mask 0x04f8, PCI irq 11
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0x2000 - 0x6fff
>cs: IO port probe 0x2000-0x6fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
>pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff
>Yenta: CardBus bridge found at 0000:02:00.1 [1014:023b]
>Yenta: Using INTVAL to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:02:00.1, mfunc 0x01d21022, devctl 0x64
>Yenta: ISA IRQ mask 0x04f8, PCI irq 11
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0x2000 - 0x6fff
>cs: IO port probe 0x2000-0x6fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
>pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k
>cpuidle: using governor ladder
>input: PS/2 Logitech Mouse as /devices/platform/i8042/serio1/input/input2
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 0:59:707
>Freeing unused kernel memory: 576k freed
>Write protecting the kernel read-only data: 944k
>modprobe used greatest stack depth: 2656 bytes left
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25-0.130.rc6.git3.fc9 uhci_hcd
>usb usb1: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25-0.130.rc6.git3.fc9 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 1-1: new full speed USB device using uhci_hcd and address 2
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25-0.130.rc6.git3.fc9 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.2
>modprobe used greatest stack depth: 1948 bytes left
>SCSI subsystem initialized
>usb 1-1: configuration #1 chosen from 1 choice
>usb 1-1: New USB device found, idVendor=2001, idProduct=3a03
>usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-1: Product: USB WLAN Device
>usb 1-1: Manufacturer: Atheros Communications Inc
>usb 1-1: SerialNumber: 1.0
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ata_piix 0000:00:1f.1: version 2.12
>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
>ata1.00: ATA-5: IC25N040ATCS04-0, CA4OA71A, max UDMA/100
>ata1.00: 78140160 sectors, multi 16: LBA 
>ata1.00: configured for UDMA/100
>ata2.00: ATAPI: MATSHITADVD-RAM UJ-830S, 1.32, max UDMA/33
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      IC25N040ATCS04-0 CA4O PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-830S  1.32 PQ: 0 ANSI: 5
>modprobe used greatest stack depth: 1140 bytes left
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:8192 avtab hash slots allocated. Num of rules:155005
>SELinux:8192 avtab hash slots allocated. Num of rules:155005
>security:  8 users, 12 roles, 2274 types, 110 bools, 1 sens, 1024 cats
>security:  72 classes, 155005 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>type=1403 audit(1206056463.809:2): policy loaded auid=4294967295 ses=4294967295
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
>ACPI: Lid Switch [LID]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: AC Adapter [AC] (on-line)
>intel_rng: FWH not detected
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>input: PC Speaker as /devices/platform/pcspkr/input/input6
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
>e100: Copyright(c) 1999-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a National Semiconductor PC87306
>e100: eth0: e100_probe: addr 0xc0220000, irq 11, MAC addr 00:03:47:6e:59:af
>parport_pc 00:0b: reported by Plug and Play ACPI
>parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
>NET: Registered protocol family 23
>nsc-ircc 00:0c: activated
>nsc-ircc, chip->init
>nsc-ircc, Found chip at base=0x02e
>nsc-ircc, driver loaded (Dag Brattli)
>IrDA: Registered device irda0
>nsc-ircc, Found dongle: HP HSDL-1100/HSDL-2100
>PCI: Enabling device 0000:00:1f.5 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>intel8x0_measure_ac97_clock: measured 50992 usecs
>intel8x0: clocking to 48000
>modprobe used greatest stack depth: 1052 bytes left
>usbcore: registered new interface driver snd-usb-audio
>device-mapper: multipath: version 1.0.5 loaded
>loop: module loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-1, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-2, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda2, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>type=1400 audit(1206052886.004:3): avc:  denied  { dac_override } for  pid=1424 comm="rhgb" capability=1 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:system_r:rhgb_t:s0 tclass=capability
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>mtrr: base(0xe8000000) is not aligned on a size(0xed0000) boundary
>Marking TSC unstable due to: TSC halts in idle.
>Time: acpi_pm clocksource has been installed.
>Clocksource tsc unstable (delta = -325073977 ns)
>Adding 2097144k swap on /dev/mapper/VolGroup00-LogVol03.  Priority:-1 extents:1 across:2097144k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
>mtrr: no MTRR for e8000000,ed0000 found
>mtrr: base(0xe8000000) is not aligned on a size(0xed0000) boundary
>eth0: no IPv6 routers present
>warning: process `python2' used the deprecated sysctl system call with 1.23.
>warning: process `python2' used the deprecated sysctl system call with 1.23.
>warning: process `python2' used the deprecated sysctl system call with 1.23.
>warning: process `python2' used the deprecated sysctl system call with 1.23.
>mtrr: base(0xe8000000) is not aligned on a size(0xed0000) boundary
>tpb[3080]: segfault at 4 ip 04bd3081 sp b7e86200 error 4 in libX11.so.6.2.0[4baa000+fd000]
>eth0: no IPv6 routers present
>warning: process `python2' used the deprecated sysctl system call with 1.23.
>

Actions: View

Attachments on bug 438448: 298756 | 298757