Attachment 298842 Details for Bug 438593 – dmesg from 2.6.23 to show the hardware configuration

dmesg from 2.6.23 to show the hardware configuration

dmesg (text/plain), 23.90 KB, created by Mads Kiilerich on 2008-03-22 15:38:13 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Mads Kiilerich

Created: 2008-03-22 15:38:13 UTC

Size: 23.90 KB

patch

obsolete

>Linux version 2.6.23.15-137.fc8 (mockbuild@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Sun Feb 10 17:48:34 EST 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ffd1800 (usable)
> BIOS-e820: 000000007ffd1800 - 0000000080000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved)
> BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>1151MB HIGHMEM available.
>896MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 524241) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   524241
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   524241
>On node 0 totalpages: 524241
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 2303 pages used for memmap
>  HighMem zone: 292562 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000FC9B0, 0014 (r0 DELL  )
>ACPI: RSDT 7FFD1F90, 0040 (r1 DELL    CPi R   27D50A02 ASL        61)
>ACPI: FACP 7FFD2C00, 0074 (r1 DELL    CPi R   27D50A02 ASL        61)
>ACPI: DSDT 7FFD3800, 3C51 (r1 INT430 SYSFexxx     1001 MSFT  100000E)
>ACPI: FACS 7FFE2000, 0040
>ACPI: APIC 7FFD3400, 0068 (r1 DELL    CPi R   27D50A02 ASL        47)
>ACPI: ASF! 7FFD3000, 005B (r16 DELL    CPi R   27D50A02 ASL        61)
>ACPI: MCFG 7FFD33C0, 003E (r16 DELL    CPi R   27D50A02 ASL        61)
>ACPI: SSDT 7FFD23E6, 0280 (r1  PmRef  Cpu0Ist     3000 INTL 20030522)
>ACPI: SSDT 7FFD220E, 01D8 (r1  PmRef  Cpu0Cst     3001 INTL 20030522)
>ACPI: SSDT 7FFD2013, 01FB (r1  PmRef    CpuPm     3000 INTL 20030522)
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:13 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 0000000000100000
>Built 1 zonelists in Zone order.  Total pages: 520146
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 nofb
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07a9000 soft=c0789000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1862.168 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2070372k/2096964k available (2187k kernel code, 25332k reserved, 1118k data, 280k init, 1179460k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0740000 - 0xc0786000   ( 280 kB)
>      .data : 0xc0622d15 - 0xc073a544   (1118 kB)
>      .text : 0xc0400000 - 0xc0622d15   (2187 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 3726.80 BogoMIPS (lpj=1863402)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 00000000
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: After all inits, caps: afe9f3ff 00100000 00000000 00002040 00000180 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>CPU0: Intel(R) Pentium(R) M processor 1.86GHz stepping 08
>Total of 1 processors activated (3726.80 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=1552 bytes
>Booting paravirtualized kernel on bare hardware
>Time:  9:18:11  Date: 03/22/08
>NET: Registered protocol family 16
>ACPI: ACPI Dock Station Driver 
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfb5be, last bus=10
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: SSDT 7FFD1FD0, 0043 (r1  LMPWR  DELLLOM     1001 INTL 20030522)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>Force enabled HPET at base address 0xfed00000
>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 1080-10bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
>ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet clockevent registered
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Time: tsc clocksource has been installed.
>pnp: 00:00: iomem range 0x0-0x9fbff could not be reserved
>pnp: 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
>pnp: 00:00: iomem range 0xc0000-0xcffff could not be reserved
>pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
>pnp: 00:02: ioport range 0x1000-0x1005 has been reserved
>pnp: 00:02: ioport range 0x1008-0x100f has been reserved
>pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved
>pnp: 00:03: ioport range 0x1006-0x1007 has been reserved
>pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved
>pnp: 00:03: ioport range 0x1060-0x107f has been reserved
>pnp: 00:03: ioport range 0x1080-0x10bf has been reserved
>pnp: 00:03: ioport range 0x10c0-0x10df has been reserved
>pnp: 00:08: ioport range 0x900-0x90f has been reserved
>pnp: 00:08: ioport range 0x910-0x91f has been reserved
>pnp: 00:08: ioport range 0x920-0x92f has been reserved
>pnp: 00:08: ioport range 0x93c-0x93f has been reserved
>pnp: 00:08: ioport range 0x940-0x97f has been reserved
>pnp: 00:0e: ioport range 0x930-0x93b has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: d000-dfff
>  MEM window: dfd00000-dfefffff
>  PREFETCH window: d0000000-d7ffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: dfc00000-dfcfffff
>  PREFETCH window: disabled.
>PCI: Bus 4, cardbus bridge: 0000:03:01.0
>  IO window: 00001400-000014ff
>  IO window: 00001800-000018ff
>  PREFETCH window: 88000000-8bffffff
>  MEM window: 8c000000-8fffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: dfb00000-dfbfffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PCI: Enabling device 0000:03:01.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 17
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3641k freed
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1206177491.605:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 433CDEB37FB53040
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI: Thermal Zone [THM] (57 C)
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:03:01.0 [1028:0182]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:03:01.0, mfunc 0x01111122, devctl 0x64
>Yenta: ISA IRQ mask 0x0cf8, PCI irq 17
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07
>pcmcia: parent PCI bridge Memory window: 0xdfb00000 - 0xdfbfffff
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 0:857:323
>  hash matches device tty48
>Freeing unused kernel memory: 280k freed
>Write protecting the kernel read-only data: 850k
>Marking TSC unstable due to: TSC halts in idle.
>Time: hpet clocksource has been installed.
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 16, io mem 0xffa80800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bf80
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000bf60
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 1-6: new high speed USB device using ehci_hcd and address 2
>input: PS/2 Mouse as /class/input/input2
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000bf40
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 17, io base 0x0000bf20
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 1-6: configuration #1 chosen from 1 choice
>hub 1-6:1.0: USB hub found
>hub 1-6:1.0: 4 ports detected
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ata_piix 0000:00:1f.2: version 2.12
>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001bfa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001bfa8 irq 15
>ata1.00: ATA-6: Hitachi HTS721060G9AT00, MC3OA40M, max UDMA/100
>ata1.00: 117210240 sectors, multi 8: LBA48 
>ata1.00: applying bridge limits
>ata1.00: configured for UDMA/100
>usb 1-6.3: new low speed USB device using ehci_hcd and address 3
>usb 1-6.3: configuration #1 chosen from 1 choice
>input: Dell Dell USB Keyboard as /class/input/input4
>input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.7-6.3
>ata2.00: ATAPI: HL-DT-ST DVD-ROM GDR-8084N, 1.01, max UDMA/33
>usb 1-6.4: new low speed USB device using ehci_hcd and address 4
>usb 1-6.4: configuration #1 chosen from 1 choice
>input: Logitech USB-PS/2 Optical Mouse as /class/input/input5
>input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-6.4
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS72106 MC3O PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD-ROM GDR8084N 1.01 PQ: 0 ANSI: 5
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: dm-0: orphan cleanup on readonly fs
>ext3_orphan_cleanup: deleting unreferenced inode 3186436
>EXT3-fs: dm-0: 1 orphan inode deleted
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1206177505.193:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  8 users, 12 roles, 2407 types, 114 bools, 1 sens, 1024 cats
>security:  67 classes, 221136 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1206177506.267:3): policy loaded auid=4294967295
>dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>input: PC Speaker as /class/input/input6
>cs: IO port probe 0x100-0x3af: excluding 0x280-0x287 0x378-0x37f
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>iTCO_vendor_support: vendor-support=0
>ACPI: AC Adapter [AC] (on-line)
>input: Lid Switch as /class/input/input7
>ACPI: Lid Switch [LID]
>input: Power Button (CM) as /class/input/input8
>ACPI: Power Button (CM) [PBTN]
>input: Sleep Button (CM) as /class/input/input9
>ACPI: Sleep Button (CM) [SBTN]
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Battery Slot [BAT1] (battery absent)
>tg3.c:v3.81.1 (October 18, 2007)
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>eth0: Tigon3 [partno(BCM95751) rev 4001 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:14:22:d7:0f:4e
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>intel_rng: FWH not detected
>input: Video Bus as /class/input/input10
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>NET: Registered protocol family 23
>ieee80211_crypt: registered algorithm 'NULL'
>parport_pc 00:0d: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>ieee80211: 802.11 data/management/control stack, git-1.1.13
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
>ipw2200: Copyright(c) 2003-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 17 (level, low) -> IRQ 18
>ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
>ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels)
>ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1e.2 to 64
>intel8x0_measure_ac97_clock: measured 50501 usecs
>intel8x0: clocking to 48000
>audit(1206177515.364:4): avc:  denied  { write } for  pid=1337 comm="sh" name="socket" dev=dm-0 ino=4454203 scontext=system_u:system_r:loadkeys_t:s0 tcontext=system_u:object_r:nscd_var_run_t:s0 tclass=sock_file
>audit(1206177515.364:5): avc:  denied  { write } for  pid=1337 comm="sh" name="socket" dev=dm-0 ino=4454203 scontext=system_u:system_r:loadkeys_t:s0 tcontext=system_u:object_r:nscd_var_run_t:s0 tclass=sock_file
>audit(1206177515.399:6): avc:  denied  { write } for  pid=1338 comm="sh" name="socket" dev=dm-0 ino=4454203 scontext=system_u:system_r:loadkeys_t:s0 tcontext=system_u:object_r:nscd_var_run_t:s0 tclass=sock_file
>audit(1206177515.399:7): avc:  denied  { write } for  pid=1338 comm="sh" name="socket" dev=dm-0 ino=4454203 scontext=system_u:system_r:loadkeys_t:s0 tcontext=system_u:object_r:nscd_var_run_t:s0 tclass=sock_file
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda3, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev sda1, type vfat), uses genfs_contexts
>Adding 1966072k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:1966072k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>Clocksource tsc unstable (delta = -163227723 ns)
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>audit(1206177526.500:8): audit_pid=1715 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>fuse init (API version 7.8)
>SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized radeon 1.28.0 20060524 on minor 0
>[drm] Setting GART location based on new memory map
>[drm] Loading R300 Microcode
>[drm] writeback test succeeded in 1 usecs
>eth1: no IPv6 routers present
>ieee80211_crypt: registered algorithm 'CCMP'
>ieee80211_crypt: registered algorithm 'TKIP'
>eth1: no IPv6 routers present

Actions: View

Attachments on bug 438593: 298842 | 301447 | 301448