Attachment 298896 Details for Bug 411481 – dmesg

dmesg

linksys_dmesg.txt (text/plain), 23.38 KB, created by Bryan Christ on 2008-03-24 14:53:06 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Bryan Christ

Created: 2008-03-24 14:53:06 UTC

Size: 23.38 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.24.3-34.fc8 (mockbuild@xenbuilder1.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Wed Mar 12 18:17:20 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000002f7e4000 (usable)
> BIOS-e820: 000000002f7e4000 - 0000000030000000 (reserved)
> BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>759MB LOWMEM available.
>found SMP MP-table at 000fe700
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 194532) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   194532
>  HighMem    194532 ->   194532
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   194532
>On node 0 totalpages: 194532
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1487 pages used for memmap
>  Normal zone: 188949 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000E9C10, 0014 (r0 COMPAQ)
>ACPI: RSDT 2F7F4040, 0038 (r1 COMPAQ CPQ0968  20040921             0)
>ACPI: FACP 2F7F40EC, 0074 (r1 COMPAQ GRANTSD         1             0)
>ACPI: DSDT 2F7F4267, 13F3 (r1 COMPAQ     DSDT        1 MSFT  100000E)
>ACPI: FACS 2F7F4000, 0040
>ACPI: SSDT 2F7F565A, 31FA (r1 COMPAQ  PROJECT        1 MSFT  100000E)
>ACPI: APIC 2F7F4160, 0068 (r1 COMPAQ GRANTSD         1             0)
>ACPI: ASF! 2F7F41C8, 0063 (r32 COMPAQ GRANTSD         1             0)
>ACPI: MCFG 2F7F422B, 003C (r1 COMPAQ GRANTSD         1             0)
>ACPI: DMI detected: Hewlett-Packard
>ACPI: PM-Timer IO Port: 0xf808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:3 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:3 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 40000000 (gap: 30000000:a0000000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e8000
>swsusp: Registered nosave memory region: 00000000000e8000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 193013
>Kernel command line: ro root=LABEL=/1 quiet noatime nodiratime
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07ba000 soft=c079a000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2794.819 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 763172k/778128k available (2237k kernel code, 14448k reserved, 1132k data, 284k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf0000000 - 0xff7fe000   ( 247 MB)
>    lowmem  : 0xc0000000 - 0xef7e4000   ( 759 MB)
>      .init : 0xc0750000 - 0xc0797000   ( 284 kB)
>      .data : 0xc062f699 - 0xc074a724   (1132 kB)
>      .text : 0xc0400000 - 0xc062f699   (2237 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>Calibrating delay using timer specific routine.. 5592.97 BogoMIPS (lpj=2796485)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebf3ff 00000000 00000000 0000b180 0000441d 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 04
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07bb000 soft=c079b000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5588.73 BogoMIPS (lpj=2794368)
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 00000000
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebf3ff 00000000 00000000 0000b180 0000441d 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU1: Thermal monitoring enabled
>CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 04
>Total of 2 processors activated (11181.70 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1680 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>  domain 1: span 00000003
>   groups: 00000003
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>  domain 1: span 00000003
>   groups: 00000003
>net_namespace: 64 bytes
>HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
>Booting paravirtualized kernel on bare hardware
>Time: 15:08:59  Date: 03/23/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.20 entry at 0xec3b1, last bus=64
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region f800-f87f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region fa00-fa3f claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>Time: tsc clocksource has been installed.
>system 00:0a: ioport range 0x400-0x41f has been reserved
>system 00:0a: ioport range 0x420-0x43f has been reserved
>system 00:0a: ioport range 0x440-0x45f has been reserved
>system 00:0a: ioport range 0x460-0x47f has been reserved
>system 00:0a: ioport range 0x480-0x48f has been reserved
>system 00:0a: ioport range 0xf800-0xf81f has been reserved
>system 00:0a: ioport range 0xf820-0xf83f has been reserved
>system 00:0a: ioport range 0xf840-0xf85f has been reserved
>system 00:0a: ioport range 0xf860-0xf87f has been reserved
>system 00:0a: ioport range 0xfa00-0xfa3f has been reserved
>system 00:0a: ioport range 0xfc00-0xfc7f has been reserved
>system 00:0a: ioport range 0xfc80-0xfcff has been reserved
>system 00:0a: ioport range 0xfe00-0xfe7f has been reserved
>system 00:0a: ioport range 0xfe80-0xfeff has been reserved
>system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
>system 00:0c: iomem range 0x0-0x9ffff could not be reserved
>system 00:0c: iomem range 0x100000-0x2fffffff could not be reserved
>system 00:0c: iomem range 0xe8000-0xfffff could not be reserved
>system 00:0c: iomem range 0xfec01000-0xffffffff could not be reserved
>system 00:0c: iomem range 0xd0000000-0xdfffffff could not be reserved
>system 00:0c: iomem range 0xcd800-0xe7fff has been reserved
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: f0200000-f04fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2976k freed
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1206284939.526:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 38B9E4E53D868C9E
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: Processor [CPU1] (supports 8 throttling states)
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected an Intel 915G Chipset.
>agpgart: Detected 7932K stolen memory.
>agpgart: AGP aperture is 256M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 0:365:134
>  hash matches device device:09
>Freeing unused kernel memory: 284k freed
>Write protecting the kernel read-only data: 893k
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 17, io mem 0xcfdc0000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 17, io base 0x00001440
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 18, io base 0x00001460
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 19, io base 0x00001480
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input1
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 22 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 20, io base 0x000014a0
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 17 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ACPI: PCI interrupt for device 0000:00:1f.2 disabled
>usb 1-7: new high speed USB device using ehci_hcd and address 4
>usb 1-7: configuration #1 chosen from 1 choice
>usb 4-1: new full speed USB device using uhci_hcd and address 2
>usb 4-1: configuration #1 chosen from 1 choice
>usb 4-2: new low speed USB device using uhci_hcd and address 3
>usb 4-2: configuration #1 chosen from 1 choice
>input: CHICONY Compaq USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input2
>input,hidraw0: USB HID v1.10 Keyboard [CHICONY Compaq USB Keyboard] on usb-0000:00:1d.2-2
>input: CHICONY Compaq USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/input/input3
>input,hiddev96,hidraw1: USB HID v1.10 Device [CHICONY Compaq USB Keyboard] on usb-0000:00:1d.2-2
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 17 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x14e0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x14e8 irq 15
>ata1.00: ATAPI: DW-224E-A, A.2E, max MWDMA2
>ata1.00: configured for MWDMA2
>scsi 0:0:0:0: CD-ROM            TEAC     DW-224E-A        A.2E PQ: 0 ANSI: 5
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0x1818 ctl 0x1830 bmdma 0x14f0 irq 21
>ata4: SATA max UDMA/133 cmd 0x1820 ctl 0x1834 bmdma 0x14f8 irq 21
>ata3.00: ATA-7: SAMSUNG SP0411C, UU100-05, max UDMA/100
>ata3.00: 78165360 sectors, multi 16: LBA48 
>ata3.00: configured for UDMA/100
>scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG SP0411C  UU10 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 2:0:0:0: [sda] Attached SCSI disk
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1206284947.706:2): selinux=0 auid=4294967295
>scsi 0:0:0:0: Attached scsi generic sg0 type 5
>sd 2:0:0:0: Attached scsi generic sg1 type 0
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:0:0: Attached scsi CD-ROM sr0
>iTCO_vendor_support: vendor-support=0
>tg3.c:v3.86 (November 9, 2007)
>ACPI: PCI Interrupt 0000:40:00.0[A] -> GSI 17 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:40:00.0 to 64
>eth0: Tigon3 [partno(BCM95751) rev 4001 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:11:85:7f:3e:22
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH6 or ICH6R TCO device (Version=2, TCOBASE=0xf860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x7E04
>usbcore: registered new interface driver usblp
>input: PC Speaker as /devices/platform/pcspkr/input/input4
>input: Power Button (FF) as /devices/virtual/input/input5
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/virtual/input/input6
>ACPI: Power Button (CM) [PBTN]
>FDC 0 is a post-1991 82077
>intel_rng: Firmware space is locked read-only. If you can't or
>intel_rng: don't want to disable this in firmware setup, and if
>intel_rng: you are certain that your system has a functional
>intel_rng: RNG, try using the 'no_fwh_detect' option.
>phy0: Selected rate control algorithm 'pid'
>Registered led device: rt2500usb-phy0:radio
>usbcore: registered new interface driver rt2500usb
>ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 21 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1e.2 to 64
>ALSA sound/pci/ac97/ac97_codec.c:2121: AC'97 0 analog subsections not ready
>intel8x0_measure_ac97_clock: measured 50871 usecs
>intel8x0: clocking to 48000
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda2, internal journal
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>warning: process `kudzu' used the deprecated sysctl system call with 1.23.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>audit(1206306564.488:3): audit_pid=1800 old=0 by auid=4294967295
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 22
>[drm] Initialized drm 1.1.0 20060810
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:14:6c:fc:9c:98
>wlan0: authenticate with AP 00:14:6c:fc:9c:98
>wlan0: authenticate with AP 00:14:6c:fc:9c:98
>wlan0: authentication with AP 00:14:6c:fc:9c:98 timed out
>wlan0: authentication frame received from 00:14:6c:fc:9c:98, but not in authenticate state - ignored
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:14:6c:fc:9c:98
>wlan0: RX authentication from 00:14:6c:fc:9c:98 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:14:6c:fc:9c:98
>wlan0: authentication frame received from 00:14:6c:fc:9c:98, but not in authenticate state - ignored
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:14:6c:fc:9c:98
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:14:6c:fc:9c:98
>wlan0: authenticate with AP 00:14:6c:fc:9c:98
>wlan0: authenticate with AP 00:14:6c:fc:9c:98
>wlan0: authentication with AP 00:14:6c:fc:9c:98 timed out
>wlan0: authentication frame received from 00:14:6c:fc:9c:98, but not in authenticate state - ignored
>wlan0: authentication frame received from 00:14:6c:fc:9c:98, but not in authenticate state - ignored
>wlan0: authentication frame received from 00:14:6c:fc:9c:98, but not in authenticate state - ignored
>wlan0: authentication frame received from 00:14:6c:fc:9c:98, but not in authenticate state - ignored
>wlan0: authentication frame received from 00:14:6c:fc:9c:98, but not in authenticate state - ignored
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:14:6c:fc:9c:98
>wlan0: RX authentication from 00:14:6c:fc:9c:98 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:14:6c:fc:9c:98
>wlan0: authentication frame received from 00:14:6c:fc:9c:98, but not in authenticate state - ignored
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:14:6c:fc:9c:98
>wlan0: authenticate with AP 00:14:6c:fc:9c:98
>wlan0: authenticate with AP 00:14:6c:fc:9c:98
>wlan0: authentication with AP 00:14:6c:fc:9c:98 timed out

Actions: View

Attachments on bug 411481: 287631 | 287641 | 287651 | 290874 | 298896