Attachment 299275 Details for Bug 437692 – dmesg from machine 1 right after 1st boot into F8

dmesg from machine 1 right after 1st boot into F8

dmesg1 (text/plain), 24.87 KB, created by Trevor Cordes on 2008-03-27 05:32:52 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Trevor Cordes

Created: 2008-03-27 05:32:52 UTC

Size: 24.87 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.24.3-34.fc8 (mockbuild@xenbuilder1.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Wed Mar 12 18:17:20 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
> BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
> BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>511MB LOWMEM available.
>found SMP MP-table at 000f51c0
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 131056) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   131056
>  HighMem    131056 ->   131056
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   131056
>On node 0 totalpages: 131056
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 991 pages used for memmap
>  Normal zone: 125969 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>DMI 2.2 present.
>Using APIC driver default
>ACPI: RSDP 000F6CB0, 0014 (r0 IntelR)
>ACPI: RSDT 1FFF3000, 002C (r1 IntelR AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP 1FFF3040, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT 1FFF30C0, 39CC (r1 INTELR AWRDACPI     1000 MSFT  100000D)
>ACPI: FACS 1FFF0000, 0040
>ACPI: APIC 1FFF6AC0, 0068 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:2 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130033
>Kernel command line: ro root=/dev/md2
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07ba000 soft=c079a000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Detected 2392.322 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 511400k/524224k available (2237k kernel code, 12228k reserved, 1132k data, 284k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xe0800000 - 0xff7fe000   ( 495 MB)
>    lowmem  : 0xc0000000 - 0xdfff0000   ( 511 MB)
>      .init : 0xc0750000 - 0xc0797000   ( 284 kB)
>      .data : 0xc062f699 - 0xc074a724   (1132 kB)
>      .text : 0xc0400000 - 0xc062f699   (2237 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 4787.38 BogoMIPS (lpj=2393691)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 128K
>CPU: Hyper-Threading is disabled
>CPU: After all inits, caps: bfebf3ff 00000000 00000000 0000b080 00004400 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>CPU0: Intel(R) Celeron(R) CPU 2.40GHz stepping 09
>Total of 1 processors activated (4787.38 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1680 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000001
>  groups: 00000001
>net_namespace: 64 bytes
>Booting paravirtualized kernel on bare hardware
>Time:  7:23:24  Date: 03/25/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfb320, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>* The chipset may have PM-Timer Bug. Due to workarounds for a bug,
>* this clock source is slow. If you are sure your timer does not have
>* this bug, please use "acpi_pm_good" to disable the workaround
>PCI quirk: region 4000-407f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 4080-40bf claimed by ICH4 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 *12 14 15)
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 14 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>Time: tsc clocksource has been installed.
>system 00:00: iomem range 0xc9800-0xcbfff has been reserved
>system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
>system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
>system 00:00: iomem range 0xfc000-0xfffff could not be reserved
>system 00:00: iomem range 0x1fff0000-0x1fffffff could not be reserved
>system 00:00: iomem range 0x0-0x9ffff could not be reserved
>system 00:00: iomem range 0x100000-0x1ffeffff could not be reserved
>system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
>system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
>system 00:00: iomem range 0xffb00000-0xffb7ffff could not be reserved
>system 00:00: iomem range 0xfff00000-0xffffffff could not be reserved
>system 00:00: iomem range 0xe0000-0xeffff has been reserved
>system 00:03: ioport range 0x4000-0x40bf could not be reserved
>system 00:04: ioport range 0xb78-0xb7b has been reserved
>system 00:04: ioport range 0xf78-0xf7b has been reserved
>system 00:04: ioport range 0xa78-0xa7b has been reserved
>system 00:04: ioport range 0xe78-0xe7b has been reserved
>system 00:04: ioport range 0xbbc-0xbbf has been reserved
>system 00:04: ioport range 0xfbc-0xfbf has been reserved
>system 00:04: ioport range 0x4d0-0x4d1 has been reserved
>system 00:04: ioport range 0x294-0x297 has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: 9000-9fff
>  MEM window: fc000000-fc0fffff
>  PREFETCH window: f8000000-fbffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: a000-afff
>  MEM window: fc100000-fc1fffff
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3174k freed
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1206429804.571:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 38B9E4E53D868C9E
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected an Intel E7205 Chipset.
>agpgart: AGP aperture is 64M @ 0xf0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 0:423:370
>Freeing unused kernel memory: 284k freed
>Write protecting the kernel read-only data: 893k
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 16, io mem 0xfc200000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000b800
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000b000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000b400
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>md: raid1 personality registered for level 1
>xor: automatically using best checksumming function: pIII_sse
>   pIII_sse  :  3056.000 MB/sec
>xor: using function: pIII_sse (3056.000 MB/sec)
>async_tx: api initialized (async)
>raid6: int32x1    699 MB/s
>raid6: int32x2    808 MB/s
>raid6: int32x4    750 MB/s
>raid6: int32x8    734 MB/s
>raid6: mmxx1     1902 MB/s
>raid6: mmxx2     2335 MB/s
>raid6: sse1x1     976 MB/s
>raid6: sse1x2    2140 MB/s
>raid6: sse2x1    1812 MB/s
>raid6: sse2x2    2605 MB/s
>raid6: using algorithm sse2x2 (2605 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
>ata1.00: ATA-6: WDC WD1200JB-00FUA0, 15.05R15, max UDMA/100
>ata1.00: 234441648 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>ata2.00: ATA-6: WDC WD1200JB-00FUA0, 15.05R15, max UDMA/100
>ata2.00: 234441648 sectors, multi 16: LBA48 
>ata2.01: ATAPI: GCR-8523B, 1.01, max MWDMA2
>ata2.00: limited to UDMA/33 due to 40-wire cable
>ata2.00: configured for UDMA/33
>ata2.01: configured for MWDMA2
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD1200JB-00F 15.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: Direct-Access     ATA      WDC WD1200JB-00F 15.0 PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdb] 234441648 512-byte hardware sectors (120034 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sdb] 234441648 512-byte hardware sectors (120034 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 sdb3
>sd 1:0:0:0: [sdb] Attached SCSI disk
>scsi 1:0:1:0: CD-ROM            HL-DT-ST CD-ROM GCR-8523B 1.01 PQ: 0 ANSI: 5
>md: md2 stopped.
>md: bind<sdb2>
>md: bind<sda2>
>raid1: raid set md2 active with 2 out of 2 mirrors
>md: md1 stopped.
>md: bind<sdb3>
>md: bind<sda3>
>raid1: raid set md1 active with 2 out of 2 mirrors
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1206429813.450:2): selinux=0 auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>scsi 1:0:1:0: Attached scsi generic sg2 type 5
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:1:0: Attached scsi CD-ROM sr0
>input: Power Button (FF) as /devices/virtual/input/input2
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/virtual/input/input3
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /devices/virtual/input/input4
>ACPI: Sleep Button (CM) [SLPB]
>intel_rng: FWH not detected
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x4060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 21 (level, low) -> IRQ 20
>e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:10:dc:f1:50:c3
>Linux Tulip driver version 1.1.15 (Feb 27, 2007)
>input: PC Speaker as /devices/platform/pcspkr/input/input5
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>parport_pc 00:0c: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 17 (level, low) -> IRQ 21
>tulip0:  MII transceiver #1 config 1000 status 786d advertising 05e1.
>eth1: ADMtek Comet rev 17 at MMIO 0xfc160000, 00:50:bf:a2:ce:61, IRQ 21.
>ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 18 (level, low) -> IRQ 19
>tulip1:  MII transceiver #1 config 1000 status 786d advertising 05e1.
>tulip1:  MII transceiver #2 config 1000 status 786d advertising 05e1.
>tulip1:  MII transceiver #3 config 1000 status 786d advertising 05e1.
>tulip1:  MII transceiver #4 config 1000 status 786d advertising 05e1.
>eth2: ADMtek Comet rev 17 at MMIO 0xfc161000, 00:04:e2:3e:8f:4c, IRQ 19.
>ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 19 (level, low) -> IRQ 18
>tulip2:  MII transceiver #1 config 1000 status 786d advertising 05e1.
>tulip2:  MII transceiver #2 config 1000 status 786d advertising 05e1.
>tulip2:  MII transceiver #3 config 1000 status 786d advertising 05e1.
>tulip2:  MII transceiver #4 config 1000 status 786d advertising 05e1.
>eth3: ADMtek Comet rev 17 at MMIO 0xfc162000, 00:04:e2:3e:8f:4d, IRQ 18.
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 21
>udev: renamed network interface eth1 to eth0
>udev: renamed network interface eth2 to eth1
>udev: renamed network interface eth3 to eth2
>udev: renamed network interface eth0_rename to eth3
>lirc_dev: IR Remote Control driver registered, major 61 
>
>lirc_mceusb2: Philips eHome USB IR Transciever and Microsoft MCE 2005 Remote Control driver for LIRC $Revision: 1.39 $
>lirc_mceusb2: Daniel Melander <lirc@rajidae.se>, Martin Blatter <martin_a_blatter@yahoo.com>
>usbcore: registered new interface driver lirc_mceusb2
>md: md0 stopped.
>md: bind<sdb1>
>md: bind<sda1>
>raid1: raid set md0 active with 2 out of 2 mirrors
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on md2, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on md0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2048184k swap on /dev/md1.  Priority:-1 extents:1 across:2048184k
>warning: process `kudzu' used the deprecated sysctl system call with 1.23.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
>0000:02:05.0: tulip_stop_rxtx() failed (CSR5 0xfc664010 CSR6 0xff972113)
>eth2: Setting full-duplex based on MII#1 link partner capability of 41e1.
>fuse init (API version 7.9)
>audit(1206429837.598:3): audit_pid=2446 old=0 by auid=4294967295
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period
>fw10d hiport:IN=eth2 OUT= MAC= SRC=192.168.225.1 DST=224.0.0.251 LEN=145 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=125 
>fw10d hiport:IN=eth2 OUT= MAC= SRC=192.168.225.1 DST=224.0.0.251 LEN=145 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=125 
>fw10d hiport:IN=eth2 OUT= MAC= SRC=192.168.225.1 DST=224.0.0.251 LEN=145 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=125 
>fw10d hiport:IN=eth2 OUT= MAC= SRC=192.168.225.1 DST=224.0.0.251 LEN=133 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=113 
>fw10d hiport:IN=eth2 OUT= MAC= SRC=192.168.225.1 DST=224.0.0.251 LEN=193 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=173 
>fw10d hiport:IN=eth2 OUT= MAC= SRC=192.168.225.1 DST=224.0.0.251 LEN=201 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=181 
>NET: Registered protocol family 15
>padlock: VIA PadLock Hash Engine not detected.
>padlock: VIA PadLock not detected.
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>HTB: quantum of class 10011 is small. Consider r2q change.
>HTB: quantum of class 10013 is small. Consider r2q change.
>0000:02:04.0: tulip_stop_rxtx() failed (CSR5 0xfc06c012 CSR6 0xff970111)
>0000:02:04.0: tulip_stop_rxtx() failed (CSR5 0xfc664010 CSR6 0xff972113)
>eth0: Setting half-duplex based on MII#1 link partner capability of 0021.
>e1000: eth1: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
>fw10d hiport:IN=eth0 OUT= MAC= SRC=24.76.72.116 DST=224.0.0.251 LEN=283 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=263 
>fw10d hiport:IN=eth0 OUT= MAC= SRC=24.76.72.116 DST=224.0.0.251 LEN=185 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=165 
>fw10d hiport:IN=eth0 OUT= MAC= SRC=24.76.72.116 DST=224.0.0.251 LEN=283 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=263 
>fw10d hiport:IN=eth0 OUT= MAC= SRC=24.76.72.116 DST=224.0.0.251 LEN=283 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=263 
>fw10d hiport:IN=eth0 OUT= MAC= SRC=24.76.72.116 DST=224.0.0.251 LEN=259 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=239 
>fw10d hiport:IN=eth0 OUT= MAC= SRC=24.76.72.116 DST=224.0.0.251 LEN=276 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=256 
>0000:02:05.0: tulip_stop_rxtx() failed (CSR5 0xfc06c012 CSR6 0xff970111)
>fw10d hiport:IN=eth1 OUT= MAC= SRC=192.168.102.1 DST=224.0.0.251 LEN=276 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=256 
>0000:02:05.0: tulip_stop_rxtx() failed (CSR5 0xfc664010 CSR6 0xff972113)
>eth2: Setting full-duplex based on MII#1 link partner capability of 41e1.
>fw10d hiport:IN=eth2 OUT= MAC= SRC=192.168.225.1 DST=224.0.0.251 LEN=284 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=264 
>0000:02:06.0: tulip_stop_rxtx() failed (CSR5 0xfc664010 CSR6 0xff972113)
>eth3: Setting full-duplex based on MII#1 link partner capability of 45e1.
>fw10d hiport:IN=eth3 OUT= MAC= SRC=192.168.152.1 DST=224.0.0.251 LEN=284 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=264 
>0000:02:04.0: tulip_stop_rxtx() failed (CSR5 0xfc06c012 CSR6 0xff970111)
>fw10d hiport:IN=eth0 OUT= MAC= SRC=24.76.72.116 DST=224.0.0.251 LEN=283 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=263 
>fw10d hiport:IN=eth0 OUT= MAC= SRC=24.76.72.116 DST=224.0.0.251 LEN=185 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=165 
>fw10d hiport:IN=eth0 OUT= MAC= SRC=24.76.72.116 DST=224.0.0.251 LEN=283 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=263 
>fw99d ext1 spoofing:IN=eth0 OUT= MAC= SRC=24.76.72.116 DST=224.0.0.251 LEN=259 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=239 
>0000:02:04.0: tulip_stop_rxtx() failed (CSR5 0xfc664010 CSR6 0xff972113)
>eth0: Setting half-duplex based on MII#1 link partner capability of 0021.
>fw99d ext1 spoofing:IN=eth0 OUT= MAC= SRC=24.76.72.116 DST=224.0.0.251 LEN=276 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=256 
>fw99d ext1 spoofing:IN=eth0 OUT= MAC= SRC=24.76.72.116 DST=224.0.0.251 LEN=259 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=239

Actions: View

Attachments on bug 437692: 299275 | 299276 | 299277 | 299278