Attachment 299277 Details for Bug 437692 – dmesg from machine 2 right after 1st boot into F8

dmesg from machine 2 right after 1st boot into F8

dmesg2 (text/plain), 25.33 KB, created by Trevor Cordes on 2008-03-27 05:35:07 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Trevor Cordes

Created: 2008-03-27 05:35:07 UTC

Size: 25.33 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.24.3-34.fc8 (mockbuild@xenbuilder1.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Wed Mar 12 18:17:20 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
> BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
> BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>511MB LOWMEM available.
>found SMP MP-table at 000fc0f0
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 131056) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   131056
>  HighMem    131056 ->   131056
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   131056
>On node 0 totalpages: 131056
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 991 pages used for memmap
>  Normal zone: 125969 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000FA400, 0014 (r0 AMI   )
>ACPI: RSDT 1FFF0000, 002C (r1 AMIINT INTEL865       10 MSFT       97)
>ACPI: FACP 1FFF0030, 0081 (r1 AMIINT INTEL865       11 MSFT       97)
>ACPI: DSDT 1FFF0120, 379F (r1  INTEL    I865G     1000 MSFT  100000D)
>ACPI: FACS 1FFF8000, 0040
>ACPI: APIC 1FFF00C0, 005C (r1 AMIINT INTEL865        9 MSFT       97)
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:4 APIC version 20
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130033
>Kernel command line: ro root=/dev/md0
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07ba000 soft=c079a000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Detected 2985.420 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 511396k/524224k available (2237k kernel code, 12264k reserved, 1132k data, 284k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xe0800000 - 0xff7fe000   ( 495 MB)
>    lowmem  : 0xc0000000 - 0xdfff0000   ( 511 MB)
>      .init : 0xc0750000 - 0xc0797000   ( 284 kB)
>      .data : 0xc062f699 - 0xc074a724   (1132 kB)
>      .text : 0xc0400000 - 0xc062f699   (2237 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>Calibrating delay using timer specific routine.. 5973.46 BogoMIPS (lpj=2986731)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: After generic identify, caps: bfebfbff 00100000 00000000 00000000 0000441d 00000000 00000000 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebf3ff 00100000 00000000 0000b180 0000441d 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07bb000 soft=c079b000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5969.88 BogoMIPS (lpj=2984943)
>CPU: After generic identify, caps: bfebfbff 00100000 00000000 00000000 0000441d 00000000 00000000 00000000
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebf3ff 00100000 00000000 0000b180 0000441d 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU1: Thermal monitoring enabled
>CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
>Total of 2 processors activated (11943.34 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1680 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>  domain 1: span 00000003
>   groups: 00000003
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>  domain 1: span 00000003
>   groups: 00000003
>net_namespace: 64 bytes
>Booting paravirtualized kernel on bare hardware
>Time:  7:23:29  Date: 03/25/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>Force enabled HPET at base address 0xfed00000
>PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 0400-043f claimed by ICH4 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 *12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *12 14 15)
>ACPI: Power Resource [URP1] (off)
>ACPI: Power Resource [URP2] (off)
>ACPI: Power Resource [FDDP] (off)
>ACPI: Power Resource [LPTP] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet clockevent registered
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Time: tsc clocksource has been installed.
>system 00:01: ioport range 0x290-0x297 has been reserved
>system 00:01: ioport range 0x3f0-0x3f1 has been reserved
>system 00:01: ioport range 0x4d0-0x4d1 has been reserved
>system 00:01: ioport range 0x400-0x43f has been reserved
>system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
>system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: b000-bfff
>  MEM window: f3d00000-f7dfffff
>  PREFETCH window: e3c00000-f3bfffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: c000-cfff
>  MEM window: f7e00000-f7efffff
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3172k freed
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1206429808.520:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 38B9E4E53D868C9E
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Processor [CPU2] (supports 8 throttling states)
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected an Intel 865 Chipset.
>agpgart: AGP aperture is 64M @ 0xf8000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 0:423:370
>Freeing unused kernel memory: 284k freed
>Write protecting the kernel read-only data: 893k
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 16, io mem 0xf7fffc00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000e000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000e400
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000e800
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 17, io base 0x0000ec00
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>md: raid1 personality registered for level 1
>xor: automatically using best checksumming function: pIII_sse
>   pIII_sse  :  3296.000 MB/sec
>xor: using function: pIII_sse (3296.000 MB/sec)
>async_tx: api initialized (async)
>raid6: int32x1    394 MB/s
>usb 4-1: new low speed USB device using uhci_hcd and address 2
>raid6: int32x2    406 MB/s
>raid6: int32x4    429 MB/s
>raid6: int32x8    414 MB/s
>raid6: mmxx1      968 MB/s
>raid6: mmxx2     1464 MB/s
>raid6: sse1x1     730 MB/s
>raid6: sse1x2    1117 MB/s
>raid6: sse2x1    1421 MB/s
>raid6: sse2x2    2296 MB/s
>raid6: using algorithm sse2x2 (2296 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>usb 4-1: configuration #1 chosen from 1 choice
>libata version 3.00 loaded.
>ata_piix 0000:00:1f.1: version 2.12
>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
>ata1.00: ATA-6: ST3160023A, 3.06, max UDMA/100
>ata1.00: 312581808 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>hiddev96hidraw0: USB HID v1.10 Device [American Power Conversion Back-UPS BR  800 FW:9.o2 .D USB FW:o2 ] on usb-0000:00:1d.2-1
>ata2.00: ATA-6: WDC WD1600JB-00GVA0, 08.02D08, max UDMA/100
>ata2.00: 312581808 sectors, multi 16: LBA48 
>ata2.01: ATAPI: HL-DT-STDVD-ROM GDR8163B, 0L23, max UDMA/33
>ata2.00: configured for UDMA/100
>ata2.01: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      ST3160023A       3.06 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: Direct-Access     ATA      WDC WD1600JB-00G 08.0 PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 sdb3
>sd 1:0:0:0: [sdb] Attached SCSI disk
>scsi 1:0:1:0: CD-ROM            HL-DT-ST DVD-ROM GDR8163B 0L23 PQ: 0 ANSI: 5
>md: md0 stopped.
>md: bind<sdb2>
>md: bind<sda2>
>raid1: raid set md0 active with 2 out of 2 mirrors
>md: md1 stopped.
>md: bind<sdb3>
>md: bind<sda3>
>raid1: raid set md1 active with 2 out of 2 mirrors
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1206429817.614:2): selinux=0 auid=4294967295
>iTCO_vendor_support: vendor-support=0
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:1:0: Attached scsi CD-ROM sr0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>sr 1:0:1:0: Attached scsi generic sg2 type 5
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>input: PC Speaker as /devices/platform/pcspkr/input/input1
>intel_rng: FWH not detected
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 20
>input: Power Button (FF) as /devices/virtual/input/input2
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/virtual/input/input3
>ACPI: Power Button (CM) [PWRB]
>r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
>ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 20 (level, low) -> IRQ 21
>eth0: RTL8110s at 0xe084ee00, 00:11:09:c6:f3:0f, XID 04000000 IRQ 21
>ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
>ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 19
>eth1: RealTek RTL-8029 found at 0xcc00, IRQ 19, 00:00:b4:54:af:56.
>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>8139cp 0000:02:03.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
>8139cp 0000:02:03.0: Try the "8139too" driver instead.
>8139too Fast Ethernet driver 0.9.28
>ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 18
>eth2: RealTek RTL8139 at 0xe0880f00, 00:48:54:1c:b2:2f, IRQ 18
>eth2:  Identified 8139 chip type 'RTL-8139C'
>parport_pc 00:0a: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
>parport0: Printer, Lexmark International Lexmark E330
>udev: renamed network interface eth1 to eth0
>udev: renamed network interface eth0_rename to eth1
>lirc_dev: IR Remote Control driver registered, major 61 
>
>lirc_mceusb2: Philips eHome USB IR Transciever and Microsoft MCE 2005 Remote Control driver for LIRC $Revision: 1.39 $
>lirc_mceusb2: Daniel Melander <lirc@rajidae.se>, Martin Blatter <martin_a_blatter@yahoo.com>
>usbcore: registered new interface driver lirc_mceusb2
>md: md2 stopped.
>md: bind<sdb1>
>md: bind<sda1>
>raid1: raid set md2 active with 2 out of 2 mirrors
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on md0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on md2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2048184k swap on /dev/md1.  Priority:-1 extents:1 across:2048184k
>warning: process `kudzu' used the deprecated sysctl system call with 1.23.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
>fw55d bad_packet:IN=eth0 OUT= MAC=00:00:b4:54:af:56:00:00:77:9b:eb:70:08:00 SRC=65.54.87.155 DST=24.76.2.201 LEN=1500 TOS=0x00 PREC=0x00 TTL=53 ID=47523 DF PROTO=TCP SPT=80 DPT=1123 WINDOW=65535 RES=0x00 ACK URGP=0 
>fuse init (API version 7.9)
>audit(1206429829.688:3): audit_pid=2421 old=0 by auid=4294967295
>fw99d oext invalid cnt:IN= OUT=eth0 SRC=24.76.2.201 DST=192.168.100.255 LEN=179 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=631 DPT=631 LEN=159 
>fw99d oext invalid cnt:IN= OUT=eth0 SRC=24.76.2.201 DST=192.168.175.255 LEN=179 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=631 DPT=631 LEN=159 
>fw10d hiport:IN=eth0 OUT= MAC= SRC=24.76.2.201 DST=224.0.0.251 LEN=143 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=123 
>fw10d hiport:IN=eth0 OUT= MAC= SRC=24.76.2.201 DST=224.0.0.251 LEN=143 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=123 
>fw10d hiport:IN=eth0 OUT= MAC= SRC=24.76.2.201 DST=224.0.0.251 LEN=143 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=123 
>fw10d hiport:IN=eth0 OUT= MAC= SRC=24.76.2.201 DST=224.0.0.251 LEN=131 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=111 
>fw10d hiport:IN=eth0 OUT= MAC= SRC=24.76.2.201 DST=224.0.0.251 LEN=193 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=173 
>fw55d bad_packet:IN=eth0 OUT= MAC=00:00:b4:54:af:56:00:00:77:9b:eb:70:08:00 SRC=65.54.87.155 DST=24.76.2.201 LEN=1500 TOS=0x00 PREC=0x00 TTL=53 ID=31064 DF PROTO=TCP SPT=80 DPT=1123 WINDOW=65535 RES=0x00 ACK URGP=0 
>fw10d hiport:IN=eth0 OUT= MAC= SRC=24.76.2.201 DST=224.0.0.251 LEN=276 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=256 
>fw55d bad_packet:IN=eth0 OUT= MAC=00:00:b4:54:af:56:00:00:77:9b:eb:70:08:00 SRC=65.54.87.155 DST=24.76.2.201 LEN=1500 TOS=0x00 PREC=0x00 TTL=53 ID=26837 DF PROTO=TCP SPT=80 DPT=1123 WINDOW=65535 RES=0x00 ACK URGP=0 
>fw55d bad_packet:IN=eth0 OUT= MAC=00:00:b4:54:af:56:00:00:77:9b:eb:70:08:00 SRC=65.54.87.155 DST=24.76.2.201 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=54512 DF PROTO=TCP SPT=80 DPT=1123 WINDOW=65535 RES=0x00 ACK RST URGP=0 
>fw99d oext invalid cnt:IN= OUT=eth0 SRC=24.76.2.201 DST=192.168.100.1 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=47719 DF PROTO=TCP SPT=42584 DPT=80 WINDOW=5840 RES=0x00 SYN URGP=0 
>fw99d oext invalid cnt:IN= OUT=eth0 SRC=24.76.2.201 DST=192.168.100.1 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=47720 DF PROTO=TCP SPT=42584 DPT=80 WINDOW=5840 RES=0x00 SYN URGP=0 
>fw99d oext invalid cnt:IN= OUT=eth0 SRC=24.76.2.201 DST=192.168.100.1 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=47721 DF PROTO=TCP SPT=42584 DPT=80 WINDOW=5840 RES=0x00 SYN URGP=0 
>fw99d oext invalid cnt:IN= OUT=eth0 SRC=24.76.2.201 DST=192.168.100.1 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=47722 DF PROTO=TCP SPT=42584 DPT=80 WINDOW=5840 RES=0x00 SYN URGP=0 
>fw99d ext1 invalid dest:IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:00:77:9b:eb:70:08:00 SRC=24.76.2.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=11335 PROTO=2 
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
>fw99d ext1 invalid dest:IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:00:77:9b:eb:70:08:00 SRC=24.76.2.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=11582 PROTO=2 
>fw41d lowport t:IN=eth0 OUT= MAC=00:00:b4:54:af:56:00:00:77:9b:eb:70:08:00 SRC=218.234.187.31 DST=24.76.2.201 LEN=48 TOS=0x00 PREC=0x00 TTL=116 ID=51493 DF PROTO=TCP SPT=1683 DPT=139 WINDOW=64240 RES=0x00 SYN URGP=0 
>fw41d lowport t:IN=eth0 OUT= MAC=00:00:b4:54:af:56:00:00:77:9b:eb:70:08:00 SRC=218.234.187.31 DST=24.76.2.201 LEN=48 TOS=0x00 PREC=0x00 TTL=116 ID=52034 DF PROTO=TCP SPT=1683 DPT=139 WINDOW=64240 RES=0x00 SYN URGP=0 
>fw41d lowport t:IN=eth0 OUT= MAC=00:00:b4:54:af:56:00:00:77:9b:eb:70:08:00 SRC=218.234.187.31 DST=24.76.2.201 LEN=48 TOS=0x00 PREC=0x00 TTL=116 ID=52575 DF PROTO=TCP SPT=2083 DPT=445 WINDOW=64240 RES=0x00 SYN URGP=0 
>fw41d lowport t:IN=eth0 OUT= MAC=00:00:b4:54:af:56:00:00:77:9b:eb:70:08:00 SRC=218.234.187.31 DST=24.76.2.201 LEN=48 TOS=0x00 PREC=0x00 TTL=116 ID=53137 DF PROTO=TCP SPT=2083 DPT=445 WINDOW=64240 RES=0x00 SYN URGP=0 
>r8169: eth1: link up
>r8169: eth1: link up
>fw10d hiport:IN=eth1 OUT= MAC= SRC=192.168.100.1 DST=224.0.0.251 LEN=185 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=165 
>fw10d hiport:IN=eth1 OUT= MAC= SRC=192.168.100.1 DST=224.0.0.251 LEN=284 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=264 
>fw10d hiport:IN=eth1 OUT= MAC= SRC=192.168.100.1 DST=224.0.0.251 LEN=284 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=264 
>fw10d hiport:IN=eth1 OUT= MAC= SRC=192.168.100.1 DST=224.0.0.251 LEN=284 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=264 
>fw10d hiport:IN=eth1 OUT= MAC= SRC=192.168.100.1 DST=224.0.0.251 LEN=260 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=240 
>eth2: link up, 100Mbps, full-duplex, lpa 0x45E1
>fw10d hiport:IN=eth2 OUT= MAC= SRC=192.168.175.1 DST=224.0.0.251 LEN=185 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=165 
>fw99d ext1 invalid dest:IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:00:77:9b:eb:70:08:00 SRC=24.76.2.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=11823 PROTO=2 
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0

Actions: View

Attachments on bug 437692: 299275 | 299276 | 299277 | 299278