Attachment 299402 Details for Bug 439296 – Output of "dmesg"

Output of "dmesg"

dmesg.txt (text/plain), 31.60 KB, created by Andrew White on 2008-03-27 22:45:26 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Andrew White

Created: 2008-03-27 22:45:26 UTC

Size: 31.60 KB

patch

obsolete

>Linux version 2.6.23.15-80.fc7 (mockbuild@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-27)) #1 SMP Sun Feb 10 16:52:18 EST 2008
>Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
> BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007deb0000 (usable)
> BIOS-e820: 000000007deb0000 - 000000007decc000 (ACPI data)
> BIOS-e820: 000000007decc000 - 000000007df00000 (ACPI NVS)
> BIOS-e820: 000000007df00000 - 000000007e000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 157) 0 entries of 3200 used
>Entering add_active_range(0, 256, 515760) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI present.
>ACPI: RSDP 000F68D0, 0024 (r2 LENOVO)
>ACPI: XSDT 7DEBBA5B, 009C (r1 LENOVO TP-7L        1140  LTP        0)
>ACPI: FACP 7DEBBB00, 00F4 (r3 LENOVO TP-7L        1140 LNVO        1)
>ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126]
>ACPI: DSDT 7DEBBF0C, FC06 (r1 LENOVO TP-7L        1140 MSFT  3000000)
>ACPI: FACS 7DEE4000, 0040
>ACPI: SSDT 7DEBBCB4, 0258 (r1 LENOVO TP-7L        1140 MSFT  3000000)
>ACPI: ECDT 7DECBB12, 0052 (r1 LENOVO TP-7L        1140 LNVO        1)
>ACPI: TCPA 7DECBB64, 0032 (r2 LENOVO TP-7L        1140 LNVO        1)
>ACPI: APIC 7DECBB96, 0068 (r1 LENOVO TP-7L        1140 LNVO        1)
>ACPI: MCFG 7DECBBFE, 003C (r1 LENOVO TP-7L        1140 LNVO        1)
>ACPI: HPET 7DECBC3A, 0038 (r1 LENOVO TP-7L        1140 LNVO        1)
>ACPI: SLIC 7DECBDF0, 0176 (r1 LENOVO TP-7L        1140  LTP        0)
>ACPI: BOOT 7DECBF66, 0028 (r1 LENOVO TP-7L        1140  LTP        1)
>ACPI: ASF! 7DECBF8E, 0072 (r16 LENOVO TP-7L        1140 PTL         1)
>ACPI: SSDT 7DEE26D9, 025F (r1 LENOVO TP-7L        1140 INTL 20050513)
>ACPI: SSDT 7DEE2938, 00A6 (r1 LENOVO TP-7L        1140 INTL 20050513)
>ACPI: SSDT 7DEE29DE, 04F7 (r1 LENOVO TP-7L        1140 INTL 20050513)
>ACPI: SSDT 7DEE2ED5, 08BD (r1 LENOVO TP-7L        1140 INTL 20050513)
>ACPI: SSDT 7DEE3792, 069C (r1 LENOVO TP-7L        1140 INTL 20050513)
>ACPI: DMI detected: Lenovo ThinkPad T61
>ACPI: Added _OSI(Linux)
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007deb0000
>Entering add_active_range(0, 0, 157) 0 entries of 3200 used
>Entering add_active_range(0, 256, 515760) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000007deb0000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0:        0 ->      157
>    0:      256 ->   515760
>On node 0 totalpages: 515661
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1310 pages reserved
>  DMA zone: 2631 pages, LIFO batch:0
>  DMA32 zone: 6995 pages used for memmap
>  DMA32 zone: 504669 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000
>swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000
>swsusp: Registered nosave memory region: 00000000000d2000 - 00000000000d4000
>swsusp: Registered nosave memory region: 00000000000d4000 - 00000000000e0000
>swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
>Allocating PCI resources starting at 80000000 (gap: 7e000000:72000000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 41176 bytes of per cpu data
>Built 1 zonelists in Node order.  Total pages: 507300
>Policy zone: DMA32
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Extended CMOS year: 2000
>Marking TSC unstable due to TSCs unsynchronized
>time.c: Detected 1994.991 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 2024728k/2063040k available (2420k kernel code, 37916k reserved, 1374k data, 328k init)
>SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>Calibrating delay using timer specific routine.. 3994.80 BogoMIPS (lpj=1997400)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 0/0 -> Node 0
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>result 12468693
>Detected 12.468 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3989.91 BogoMIPS (lpj=1994955)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring handled by SMI
>Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz stepping 0a
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=2080 bytes
>Time: 12:12:56  Date: 03/27/08
>NET: Registered protocol family 16
>ACPI: ACPI Dock Station Driver 
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: EC: EC description table is found, configuring boot EC
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 1180-11bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: Power Resource [PUBS] (on)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Time: hpet clocksource has been installed.
>pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:00: iomem range 0xc0000-0xc3fff has been reserved
>pnp: 00:00: iomem range 0xc4000-0xc7fff has been reserved
>pnp: 00:00: iomem range 0xc8000-0xcbfff has been reserved
>pnp: 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved
>pnp: 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
>pnp: 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
>pnp: 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
>PCI: Failed to allocate mem resource #6:20000@f0000000 for 0000:01:00.0
>PCI: Bridge: 0000:00:01.0
>  IO window: 2000-2fff
>  MEM window: d4000000-d6ffffff
>  PREFETCH window: e0000000-efffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: 3000-3fff
>  MEM window: fc000000-fdffffff
>  PREFETCH window: f8000000-f80fffff
>PCI: Bridge: 0000:00:1c.1
>  IO window: 4000-4fff
>  MEM window: dc100000-df2fffff
>  PREFETCH window: dfd00000-dfdfffff
>PCI: Bridge: 0000:00:1c.2
>  IO window: 5000-5fff
>  MEM window: d8000000-d9ffffff
>  PREFETCH window: dfa00000-dfafffff
>PCI: Bridge: 0000:00:1c.3
>  IO window: 6000-6fff
>  MEM window: d0000000-d1ffffff
>  PREFETCH window: df700000-df7fffff
>PCI: Bridge: 0000:00:1c.4
>  IO window: 7000-7fff
>  MEM window: cc000000-cdffffff
>  PREFETCH window: df400000-df4fffff
>PCI: Bus 22, cardbus bridge: 0000:15:00.0
>  IO window: 00008000-000080ff
>  IO window: 00008400-000084ff
>  PREFETCH window: f4000000-f7ffffff
>  MEM window: 80000000-83ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 8000-bfff
>  MEM window: f8100000-fbffffff
>  PREFETCH window: f4000000-f7ffffff
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>PCI: Enabling device 0000:00:1e.0 (0005 -> 0007)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:15:00.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 6291456 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3733k freed
>Simple Boot Flag at 0x35 set to 0x1
>audit: initializing netlink socket (disabled)
>audit(1206619976.545:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 9B511AECEC7AAA8F
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>Allocate Port Service[0000:00:01.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>Allocate Port Service[0000:00:1c.3:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: SSDT 7DEE1D72, 02C4 (r1  PmRef  Cpu0Ist      100 INTL 20050513)
>ACPI: SSDT 7DEE20BB, 061E (r1  PmRef  Cpu0Cst      100 INTL 20050513)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 7DEE1CAA, 00C8 (r1  PmRef  Cpu1Ist      100 INTL 20050513)
>ACPI: SSDT 7DEE2036, 0085 (r1  PmRef  Cpu1Cst      100 INTL 20050513)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Thermal Zone [THM0] (31 C)
>ACPI: Thermal Zone [THM1] (35 C)
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:15:00.0 [17aa:20c6]
>Yenta: ISA IRQ mask 0x04b8, PCI irq 16
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0x8000 - 0xbfff
>pcmcia: parent PCI bridge Memory window: 0xf8100000 - 0xfbffffff
>pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>  Magic number: 0:450:229
>Freeing unused kernel memory: 328k freed
>Write protecting the kernel read-only data: 1016k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 1-1: new full speed USB device using uhci_hcd and address 2
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000
>serio: Synaptics pass-through port at isa0060/serio1/input0
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 1-1: configuration #1 chosen from 1 choice
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226400
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe226800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ata_piix 0000:00:1f.2: version 2.12
>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x0000000000011c30 irq 14
>ata2: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x0000000000011c38 irq 15
>usb 1-1: USB disconnect, address 2
>ata1.00: ATA-7: ST9120822AS, 3.CLF, max UDMA/100
>ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/100
>usb 1-1: new full speed USB device using uhci_hcd and address 3
>ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-U10N, 1.05, max UDMA/33
>usb 1-1: configuration #1 chosen from 1 choice
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      ST9120822AS      3.CL PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-U10N  1.05 PQ: 0 ANSI: 5
>usb 1-2: new full speed USB device using uhci_hcd and address 4
>usb 1-2: configuration #1 chosen from 1 choice
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>security:  3 users, 6 roles, 1835 types, 87 bools, 1 sens, 1024 cats
>security:  61 classes, 69957 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1206619982.670:2): policy loaded auid=4294967295
>IBM TrackPoint firmware: 0x0e, buttons: 3/3
>input: TPPS/2 IBM TrackPoint as /class/input/input3
>thinkpad_acpi: ThinkPad ACPI Extras v0.16
>thinkpad_acpi: http://ibm-acpi.sf.net/
>thinkpad_acpi: ThinkPad BIOS 7LET44WW (1.14 ), EC 7KHT22WW-1.06
>thinkpad_acpi: Lenovo ThinkPad T61
>thinkpad_acpi: radio switch found; radios are enabled
>input: ThinkPad Extra Buttons as /class/input/input4
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>Bluetooth: HCI USB driver ver 2.9
>input: Power Button (FF) as /class/input/input5
>usbcore: registered new interface driver hci_usb
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /class/input/input6
>ACPI: Lid Switch [LID]
>input: Sleep Button (CM) as /class/input/input7
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci: SDHCI controller found at 0000:15:00.2 [1180:0822] (rev 21)
>ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:15:00.2 to 64
>mmc0: SDHCI at 0xf8101800 irq 18 DMA
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: Battery Slot [BAT0] (battery present)
>input: PC Speaker as /class/input/input8
>ACPI: AC Adapter [AC] (off-line)
>ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 23
>Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:19.0 to 64
>e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:1a:6b:ce:92:70
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>input: Video Bus as /class/input/input9
>ACPI: PCI Interrupt 0000:15:00.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:15:00.1 to 64
>ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.23kds
>iwl3945: Copyright(c) 2003-2007 Intel Corporation
>firewire_ohci: Added fw-ohci device 0000:15:00.1, OHCI version 1.10
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>phy0: Selected rate control algorithm 'iwl-3945-rs'
>ACPI: PCI interrupt for device 0000:03:00.0 disabled
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>NVRM: loading NVIDIA UNIX x86_64 Kernel Module  169.09  Fri Jan 11 14:04:37 PST 2008
>firewire_core: created device fw0: GUID 00061b032a133d9c, S400
>ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay
>ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Adding notify handler
>ACPI: Bay [\_SB_.PCI0.IDE0.PRIM.MSTR] Added
>ACPI: \_SB_.PCI0.SATA.SCND.MSTR: found ejectable bay
>ACPI: \_SB_.PCI0.SATA.SCND.MSTR: Adding notify handler
>ACPI: Error installing bay notify handler
>ACPI: Bay [\_SB_.PCI0.SATA.SCND.MSTR] Added
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda3, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:2031608k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>audit(1206634417.779:3): audit_pid=1954 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>fuse init (API version 7.8)
>SELinux: initialized (dev fusectl, type fusectl), not configured for labeling
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>vboxdrv: Trying to deactivate the NMI watchdog permanently...
>vboxdrv: Successfully done.
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>input: Virtual ThinkFinger Keyboard as /class/input/input10
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:0b:86:ab:55:a0
>wlan0: RX authentication from 00:0b:86:ab:55:a0 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:0b:86:ab:55:a0
>wlan0: RX AssocResp from 00:0b:86:ab:55:a0 (capab=0x421 status=0 aid=1)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: no IPv6 routers present
>irq 19: nobody cared (try booting with the "irqpoll" option)
>
>Call Trace:
> <IRQ>  [<ffffffff810667e3>] __report_bad_irq+0x30/0x72
> [<ffffffff81066a34>] note_interrupt+0x20f/0x253
> [<ffffffff81067320>] handle_fasteoi_irq+0xa9/0xd1
> [<ffffffff8100e0ec>] do_IRQ+0xf1/0x161
> [<ffffffff8100c0d1>] ret_from_intr+0x0/0xa
> <EOI>  [<ffffffff811625cb>] acpi_processor_idle+0x2be/0x49b
> [<ffffffff811625c1>] acpi_processor_idle+0x2b4/0x49b
> [<ffffffff8116230d>] acpi_processor_idle+0x0/0x49b
> [<ffffffff8100ae83>] cpu_idle+0x8c/0xaf
> [<ffffffff81429ba5>] start_kernel+0x2ca/0x2d6
> [<ffffffff81429140>] _sinittext+0x140/0x144
>
>handlers:
>[<ffffffff811a68ab>] (usb_hcd_irq+0x0/0x52)
>Disabling IRQ #19
>wlan0: CTS protection enabled (BSSID=00:0b:86:ab:55:a0)
>wlan0: CTS protection disabled (BSSID=00:0b:86:ab:55:a0)
>input: Virtual ThinkFinger Keyboard as /class/input/input11
>wlan0: CTS protection enabled (BSSID=00:0b:86:ab:55:a0)
>input: Virtual ThinkFinger Keyboard as /class/input/input12
>input: Virtual ThinkFinger Keyboard as /class/input/input13
>wlan0: CTS protection disabled (BSSID=00:0b:86:ab:55:a0)
>wlan0: CTS protection enabled (BSSID=00:0b:86:ab:55:a0)
>wlan0: CTS protection disabled (BSSID=00:0b:86:ab:55:a0)
>input: Virtual ThinkFinger Keyboard as /class/input/input14
>input: Virtual ThinkFinger Keyboard as /class/input/input15
>usb 6-3: new high speed USB device using ehci_hcd and address 4
>usb 6-3: configuration #1 chosen from 1 choice
>Initializing USB Mass Storage driver...
>scsi2 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 4
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device scan complete
>scsi 2:0:0:0: Direct-Access     WDC WD80 0VE-00HDT0       0811 PQ: 0 ANSI: 0
>sd 2:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
>sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
>sd 2:0:0:0: [sdb] Assuming drive cache: write through
>sd 2:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
>sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
>sd 2:0:0:0: [sdb] Assuming drive cache: write through
> sdb: sdb1 sdb2 sdb3 < sdb5 > sdb4
>sd 2:0:0:0: [sdb] Attached SCSI disk
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs warning: checktime reached, running e2fsck is recommended
>EXT3 FS on sdb2, internal journal
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdb2, type ext3), uses xattr
>SELinux: initialized (dev sdb1, type fuseblk), uses genfs_contexts
>SELinux: initialized (dev sdb4, type vfat), uses genfs_contexts
>wlan0: RX too short data frame payload
>wlan0: RX too short data frame payload
>usb 6-3: USB disconnect, address 4
>Monitor-Mwait will be used to enter C-3 state
>wlan0: RX too short data frame payload
>input: Virtual ThinkFinger Keyboard as /class/input/input16
>wlan0: RX too short data frame payload
>wlan0: RX too short data frame payload
>input: Virtual ThinkFinger Keyboard as /class/input/input17
>wlan0: RX too short data frame payload
>wlan0: RX too short data frame payload
>wlan0: RX too short data frame payload
>wlan0: RX too short data frame payload
>wlan0: RX too short data frame payload
>wlan0: CTS protection enabled (BSSID=00:0b:86:ab:55:a0)
>wlan0: CTS protection disabled (BSSID=00:0b:86:ab:55:a0)
>wlan0: RX too short data frame payload
>wlan0: RX too short data frame payload
>wlan0: RX too short data frame payload
>wlan0: RX too short data frame payload
>input: Virtual ThinkFinger Keyboard as /class/input/input18
>wlan0: RX too short data frame payload
>wlan0: RX too short data frame payload
>wlan0: RX too short data frame payload
>wlan0: RX too short data frame payload
>wlan0: RX too short data frame payload
>wlan0: RX too short data frame payload
>input: Virtual ThinkFinger Keyboard as /class/input/input19
>wlan0: RX too short data frame payload

Actions: View

Attachments on bug 439296: 299402