Attachment 299438 Details for Bug 438961 – dmesg

dmesg

dmesg (text/plain), 27.59 KB, created by Nicholas on 2008-03-28 07:07:23 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Nicholas

Created: 2008-03-28 07:07:23 UTC

Size: 27.59 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.24.3-50.fc8 (mockbuild@xenbuilder1.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Thu Mar 20 14:47:10 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009c000 (usable)
> BIOS-e820: 000000000009c000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fef0000 (usable)
> BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS)
> BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data)
> BIOS-e820: 00000000d0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>1150MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f3f30
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 524016) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   524016
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   524016
>On node 0 totalpages: 524016
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 2301 pages used for memmap
>  HighMem zone: 292339 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI 2.4 present.
>Using APIC driver default
>ACPI: RSDP 000F7E60, 0014 (r0 Nvidia)
>ACPI: RSDT 7FEF3040, 003C (r1 DELL    M07     42302E31 NVDA        0)
>ACPI: FACP 7FEF3240, 0074 (r1 Nvidia NVDAACPI 42302E31 NVDA        0)
>ACPI: DSDT 7FEF3300, 46D9 (r1 NVIDIA NVDAACPI     1000 MSFT  3000000)
>ACPI: FACS 7FEF7D00, 0040
>ACPI: HPET 7FEF7B40, 0038 (r1 Nvidia NVDAACPI 42302E31 NVDA       98)
>ACPI: WDRT 7FEF7BC0, 0047 (r1 Nvidia NVDAACPI 42302E31 NVDA        0)
>ACPI: MCFG 7FEF7C80, 003C (r1 Nvidia NVDAACPI 42302E31 NVDA        0)
>ACPI: APIC 7FEF7A40, 0098 (r1 Nvidia NVDAACPI 42302E31 NVDA        0)
>ACPI: SLIC 7FEF307C, 0176 (r1 DELL    M07     27D60C12 ASL        61)
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x10de8201 base: 0xfeff0000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 80000000 (gap: 7ff00000:50100000)
>swsusp: Registered nosave memory region: 000000000009c000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519923
>Kernel command line: ro root=LABEL=/1 rhgb quiet cpufreq.debug=7
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07ba000 soft=c079a000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2000.035 MHz processor.
>spurious 8259A interrupt: IRQ7.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2070060k/2096064k available (2238k kernel code, 24748k reserved, 1131k data, 284k init, 1178560k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0750000 - 0xc0797000   ( 284 kB)
>      .data : 0xc062f979 - 0xc074a724   (1131 kB)
>      .text : 0xc0400000 - 0xc062f979   (2238 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 4002.82 BogoMIPS (lpj=2001413)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003140 0000e39d 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>CPU0: Intel(R) Pentium(R) Dual  CPU  E2180  @ 2.00GHz stepping 0d
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07bb000 soft=c079b000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3999.86 BogoMIPS (lpj=1999933)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003140 0000e39d 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Pentium(R) Dual  CPU  E2180  @ 2.00GHz stepping 0d
>Total of 2 processors activated (8002.69 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1680 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>  domain 1: span 00000003
>   groups: 00000003
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>  domain 1: span 00000003
>   groups: 00000003
>net_namespace: 64 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 14:36:01  Date: 03/28/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 3.00 entry at 0xfa7a0, last bus=4
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Transparent bridge - 0000:00:10.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LXV5] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LXV6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LXV7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LXV8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
>ACPI: PCI Interrupt Link [AXV5] (IRQs 16) *0
>ACPI: PCI Interrupt Link [AXV6] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AXV7] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AXV8] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 14 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 8 of bridge 0000:00:10.0
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
>hpet0: 3 32-bit timers, 25000000 Hz
>Time: tsc clocksource has been installed.
>system 00:00: ioport range 0x1000-0x107f has been reserved
>system 00:00: ioport range 0x1080-0x10ff has been reserved
>system 00:00: ioport range 0x1400-0x147f has been reserved
>system 00:00: ioport range 0x1480-0x14ff has been reserved
>system 00:00: ioport range 0x1800-0x187f has been reserved
>system 00:00: ioport range 0x1880-0x18ff has been reserved
>system 00:02: iomem range 0xcff80000-0xcff87fff has been reserved
>system 00:02: iomem range 0x0-0x0 could not be reserved
>system 00:03: ioport range 0x4d0-0x4d1 has been reserved
>system 00:03: ioport range 0x295-0x314 has been reserved
>system 00:03: ioport range 0x880-0x88f has been reserved
>system 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved
>system 00:0d: iomem range 0xd0000-0xd3fff has been reserved
>system 00:0d: iomem range 0xde000-0xdffff has been reserved
>system 00:0d: iomem range 0xf0000-0xfbfff could not be reserved
>system 00:0d: iomem range 0xfc000-0xfffff could not be reserved
>system 00:0d: iomem range 0x7fef0000-0x7fefffff could not be reserved
>system 00:0d: iomem range 0xffff0000-0xffffffff could not be reserved
>system 00:0d: iomem range 0x0-0x9ffff could not be reserved
>system 00:0d: iomem range 0x100000-0x7feeffff could not be reserved
>system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
>system 00:0d: iomem range 0xd0000000-0xdfffffff could not be reserved
>system 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved
>system 00:0d: iomem range 0xfeff0000-0xfeff0000 could not be reserved
>PCI: Bridge: 0000:00:03.0
>  IO window: b000-bfff
>  MEM window: cc000000-ceffffff
>  PREFETCH window: b0000000-bfffffff
>PCI: Bridge: 0000:00:06.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:07.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:10.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>PCI: Setting latency timer of device 0000:00:10.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>Freeing initrd memory: 2948k freed
>speedstep-lib: x86: 6, model: f
>speedstep-ich: Intel(R) SpeedStep(TM) capable processor not found
>speedstep-lib: x86: 6, model: f
>speedstep-smi: No supported Intel CPU detected.
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1206714961.575:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 1074BC1BA0A7E256
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.0:pcie00]
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:06.0:pcie00]
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:07.0:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfeff0000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 0:152:638
>Freeing unused kernel memory: 284k freed
>Write protecting the kernel read-only data: 893k
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:0b.1 to 64
>ehci_hcd 0000:00:0b.1: EHCI Host Controller
>ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:0b.1: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:0b.1
>ehci_hcd 0000:00:0b.1: irq 16, io mem 0xcfffe000
>ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 22 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>ohci_hcd 0000:00:0b.0: OHCI Host Controller
>ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:0b.0: irq 17, io mem 0xcffff000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 8 ports detected
>USB Universal Host Controller Interface driver v3.0
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>usb 2-8: new low speed USB device using ohci_hcd and address 2
>usb 2-8: configuration #1 chosen from 1 choice
>input: PIXART USB OPTICAL MOUSE as /class/input/input2
>input,hidraw0: USB HID v1.10 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:0b.0-8
>pata_amd 0000:00:0d.0: version 0.3.10
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>scsi0 : pata_amd
>scsi1 : pata_amd
>ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14
>ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15
>ata1.00: ATA-7: Maxtor 6E040L0, NAR61590, max UDMA/133
>ata1.00: 80293248 sectors, multi 16: LBA 
>ata1.00: configured for UDMA/133
>ata2: port disabled. ignoring.
>scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6E040L0   NAR6 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 80293248 512-byte hardware sectors (41110 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 80293248 512-byte hardware sectors (41110 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>sata_nv 0000:00:0e.0: version 3.5
>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>scsi2 : sata_nv
>scsi3 : sata_nv
>ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 18
>ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 18
>ata3: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata4.00: ATAPI: PIONEER DVD-RW  DVR-215, 1.13, max UDMA/66
>ata4.00: configured for UDMA/66
>scsi 3:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-215  1.13 PQ: 0 ANSI: 5
>ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:0f.0 to 64
>scsi4 : sata_nv
>scsi5 : sata_nv
>ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 19
>ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 19
>ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata5.00: ATA-7: ST380815AS, 3.AAD, max UDMA/133
>ata5.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata5.00: configured for UDMA/133
>ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata6.00: HPA detected: current 156299375, native 156301488
>ata6.00: ATA-7: ST380815AS, 3.AAD, max UDMA/133
>ata6.00: 156299375 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata6.00: configured for UDMA/133
>scsi 4:0:0:0: Direct-Access     ATA      ST380815AS       3.AA PQ: 0 ANSI: 5
>sd 4:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
>sd 4:0:0:0: [sdb] Write Protect is off
>sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 4:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
>sd 4:0:0:0: [sdb] Write Protect is off
>sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 4:0:0:0: [sdb] Attached SCSI disk
>scsi 5:0:0:0: Direct-Access     ATA      ST380815AS       3.AA PQ: 0 ANSI: 5
>sd 5:0:0:0: [sdc] 156299375 512-byte hardware sectors (80025 MB)
>sd 5:0:0:0: [sdc] Write Protect is off
>sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 5:0:0:0: [sdc] 156299375 512-byte hardware sectors (80025 MB)
>sd 5:0:0:0: [sdc] Write Protect is off
>sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1 sdc2
> sdc: p2 exceeds device capacity
>sd 5:0:0:0: [sdc] Attached SCSI disk
>attempt to access beyond end of device
>sdc: rw=0, want=312596360, limit=156299375
>Buffer I/O error on device sdc2, logical block 30114288
>attempt to access beyond end of device
>sdc: rw=0, want=312596360, limit=156299375
>Buffer I/O error on device sdc2, logical block 30114288
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:8192 avtab hash slots allocated.Num of rules:207815
>SELinux:8192 avtab hash slots allocated.Num of rules:207815
>security:  8 users, 11 roles, 2317 types, 112 bools, 1 sens, 1024 cats
>security:  67 classes, 207815 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>audit(1206714974.122:2): policy loaded auid=4294967295
>attempt to access beyond end of device
>sdc: rw=0, want=312596360, limit=156299375
>Buffer I/O error on device sdc2, logical block 30114288
>attempt to access beyond end of device
>sdc: rw=0, want=312596360, limit=156299375
>Buffer I/O error on device sdc2, logical block 30114288
>attempt to access beyond end of device
>sdc: rw=0, want=312596472, limit=156299375
>Buffer I/O error on device sdc2, logical block 30114302
>attempt to access beyond end of device
>sdc: rw=0, want=312596472, limit=156299375
>Buffer I/O error on device sdc2, logical block 30114302
>attempt to access beyond end of device
>sdc: rw=0, want=312596480, limit=156299375
>Buffer I/O error on device sdc2, logical block 30114303
>attempt to access beyond end of device
>sdc: rw=0, want=312596480, limit=156299375
>Buffer I/O error on device sdc2, logical block 30114303
>attempt to access beyond end of device
>sdc: rw=0, want=312596480, limit=156299375
>Buffer I/O error on device sdc2, logical block 30114303
>attempt to access beyond end of device
>sdc: rw=0, want=312596480, limit=156299375
>Buffer I/O error on device sdc2, logical block 30114303
>attempt to access beyond end of device
>sdc: rw=0, want=312596480, limit=156299375
>attempt to access beyond end of device
>sdc: rw=0, want=312596480, limit=156299375
>attempt to access beyond end of device
>sdc: rw=0, want=312596480, limit=156299375
>attempt to access beyond end of device
>sdc: rw=0, want=312596424, limit=156299375
>attempt to access beyond end of device
>sdc: rw=0, want=312596472, limit=156299375
>attempt to access beyond end of device
>sdc: rw=0, want=312596480, limit=156299375
>attempt to access beyond end of device
>sdc: rw=0, want=312596480, limit=156299375
>forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:14.0 to 64
>input: PC Speaker as /class/input/input3
>Driver 'sr' needs updating - please use bus_type methods
>FDC 0 is a post-1991 82077
>sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 3:0:0:0: Attached scsi CD-ROM sr0
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PWRB]
>nvidia: module license 'NVIDIA' taints kernel.
>forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:04:4b:07:91:42
>forcedeth 0000:00:14.0: highdma pwrctl timirq gbit lnktim desc-v3
>i2c-adapter i2c-0: nForce2 SMBus adapter at 0xfc00
>i2c-adapter i2c-1: nForce2 SMBus adapter at 0xf800
>ACPI: PCI Interrupt Link [AXV5] enabled at IRQ 16
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [AXV5] -> GSI 16 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>NVRM: loading NVIDIA UNIX x86 Kernel Module  169.12  Thu Feb 14 17:53:07 PST 2008
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 3:0:0:0: Attached scsi generic sg1 type 5
>sd 4:0:0:0: Attached scsi generic sg2 type 0
>sd 5:0:0:0: Attached scsi generic sg3 type 0
>ACPI: PCI Interrupt Link [APCI] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [APCI] -> GSI 22 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:10.1 to 64
>ALSA sound/pci/hda/hda_intel.c:732: codec_mask = 0x1
>hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
>ALSA sound/pci/hda/hda_codec.c:2757: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0)
>ALSA sound/pci/hda/hda_codec.c:2761:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2765:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2773:    inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x0
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda1, internal journal
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 104412k swap on /dev/sda2.  Priority:-1 extents:1 across:104412k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts

Actions: View

Attachments on bug 438961: 299438