Attachment 299514 Details for Bug 437854 – dmesg output

dmesg output

kerneloops.txt (text/plain), 39.50 KB, created by Thomas J. Baker on 2008-03-28 19:19:38 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Thomas J. Baker

Created: 2008-03-28 19:19:38 UTC

Size: 39.50 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.25-0.163.rc7.git1.fc9.x86_64 (mockbuild@) (gcc version 4.3.0 20080326 (Red Hat 4.3.0-4) (GCC) ) #1 SMP Thu Mar 27 09:29:41 EDT 2008
>Command line: ro root=/dev/vg0/FCroot rhgb
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007f693400 (usable)
> BIOS-e820: 000000007f693400 - 0000000080000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved)
> BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 521875) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.4 present.
>ACPI: RSDP 000FC1D0, 0014 (r0 DELL  )
>ACPI: RSDT 7F69398B, 0040 (r1 DELL    M07     27D7070A ASL        61)
>ACPI: FACP 7F694800, 0074 (r1 DELL    M07     27D7070A ASL        61)
>ACPI: DSDT 7F695400, 4766 (r1 INT430 SYSFexxx     1001 INTL 20050624)
>ACPI: FACS 7F6A3C00, 0040
>ACPI: HPET 7F694F00, 0038 (r1 DELL    M07            1 ASL        61)
>ACPI: APIC 7F695000, 0068 (r1 DELL    M07     27D7070A ASL        47)
>ACPI: MCFG 7F694FC0, 003E (r16 DELL    M07     27D7070A ASL        61)
>ACPI: SLIC 7F69509C, 0176 (r1 DELL    M07     27D7070A ASL        61)
>ACPI: BOOT 7F694BC0, 0028 (r1 DELL    M07     27D7070A ASL        61)
>ACPI: SSDT 7F6939CB, 04DC (r1  PmRef    CpuPm     3000 INTL 20050624)
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007f693000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 521875) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000007f693000
>  NODE_DATA [000000000000c000 - 0000000000013fff]
>  bootmap [0000000000014000 -  0000000000023ed7] pages 10
>early res: 0 [0-fff] BIOS data page
>early res: 1 [6000-7fff] SMP_TRAMPOLINE
>early res: 2 [200000-bf9bd7] TEXT DATA BSS
>early res: 3 [37c7c000-37fefa80] RAMDISK
>early res: 4 [9f000-9ffff] EBDA
>early res: 5 [8000-bfff] PGTABLE
>No mptable found.
> [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
> [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001400000 on node 0
> [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001800000 on node 0
> [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001c00000 on node 0
> [ffffe20000800000-ffffe200009fffff] PMD ->ffff810001e00000 on node 0
> [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002200000 on node 0
> [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002600000 on node 0
> [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002800000 on node 0
> [ffffe20001000000-ffffe200011fffff] PMD ->ffff810002c00000 on node 0
> [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003000000 on node 0
> [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003200000 on node 0
> [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003600000 on node 0
> [ffffe20001800000-ffffe200019fffff] PMD ->ffff810003a00000 on node 0
> [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810003c00000 on node 0
> [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004000000 on node 0
> [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004400000 on node 0
> [ffffe20002000000-ffffe200021fffff] PMD ->ffff810004600000 on node 0
> [ffffe20002200000-ffffe200023fffff] PMD ->ffff810004a00000 on node 0
> [ffffe20002400000-ffffe200025fffff] PMD ->ffff810004e00000 on node 0
> [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005000000 on node 0
> [ffffe20002800000-ffffe200029fffff] PMD ->ffff810005400000 on node 0
> [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810005800000 on node 0
> [ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810005a00000 on node 0
> [ffffe20002e00000-ffffe20002ffffff] PMD ->ffff810005e00000 on node 0
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   521875
>On node 0 totalpages: 521778
>  DMA zone: 96 pages used for memmap
>  DMA zone: 2561 pages reserved
>  DMA zone: 1342 pages, LIFO batch:0
>  DMA32 zone: 12135 pages used for memmap
>  DMA32 zone: 505644 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 436904 bytes of per cpu data
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 506986
>Policy zone: DMA32
>Kernel command line: ro root=/dev/vg0/FCroot rhgb
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC calibrated against PM_TIMER
>time.c: Detected 2330.209 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          48
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1712 kB
> per task-struct memory footprint: 3456 bytes
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 2022948k/2087500k available (2730k kernel code, 64164k reserved, 1468k data, 736k init)
>CPA: page pool initialized 32 of 32 pages preallocated
>SLUB: Genslabs=13, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 4666.01 BogoMIPS (lpj=2333009)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>using mwait in idle threads.
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>APIC timer calibration result 10402701
>Detected 10.402 MHz APIC timer.
>lockdep: fixing up alternatives.
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4660.18 BogoMIPS (lpj=2330093)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel(R) Core(TM)2 CPU         T7600  @ 2.33GHz stepping 06
>checking TSC synchronization [CPU#0 -> CPU#1]:
>Measured 4657363466 cycles TSC warp between CPUs, turning off TSC clock.
>Marking TSC unstable due to check_tsc_sync_source failed
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=96 bytes
>sizeof(inode)=1088 bytes
>sizeof(dentry)=256 bytes
>sizeof(ext3inode)=1488 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=224 bytes
>sizeof(task_struct)=9984 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000000,00000003
>  groups: 00000000,00000001 00000000,00000002
>  domain 1: span 00000000,00000003
>   groups: 00000000,00000003
>CPU1 attaching sched-domain:
> domain 0: span 00000000,00000003
>  groups: 00000000,00000002 00000000,00000001
>  domain 1: span 00000000,00000003
>   groups: 00000000,00000003
>khelper used greatest stack depth: 5336 bytes left
>net_namespace: 1144 bytes
>Time: 15:12:09  Date: 03/28/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using MMCONFIG at f0000000 - f3ffffff
>PCI: Using configuration type 1
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *4
>ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>DMAR:parse DMAR table failure.
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 11
>hpet0: 3 64-bit timers, 14318180 Hz
>ACPI: RTC can wake from S4
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>system 00:00: iomem range 0x0-0x9fbff could not be reserved
>system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
>system 00:00: iomem range 0xc0000-0xcffff has been reserved
>system 00:00: iomem range 0xe0000-0xfffff has been reserved
>system 00:00: iomem range 0x100000-0x7f6933ff could not be reserved
>system 00:00: iomem range 0x7f693400-0x7f6fffff could not be reserved
>system 00:00: iomem range 0x7f700000-0x7f7fffff could not be reserved
>system 00:00: iomem range 0x7f700000-0x7fefffff could not be reserved
>system 00:00: iomem range 0xffb00000-0xffffffff could not be reserved
>system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved
>system 00:00: iomem range 0xfee00000-0xfee0ffff could not be reserved
>system 00:00: iomem range 0xfed20000-0xfed9ffff could not be reserved
>system 00:00: iomem range 0xffa80000-0xffa83fff could not be reserved
>system 00:00: iomem range 0xf4000000-0xf4003fff could not be reserved
>system 00:00: iomem range 0xf4004000-0xf4004fff could not be reserved
>system 00:00: iomem range 0xf4005000-0xf4005fff could not be reserved
>system 00:00: iomem range 0xf4006000-0xf4006fff could not be reserved
>system 00:00: iomem range 0xf4008000-0xf400bfff could not be reserved
>system 00:00: iomem range 0xf0000000-0xf3ffffff could not be reserved
>system 00:02: ioport range 0x4d0-0x4d1 has been reserved
>system 00:02: ioport range 0x1000-0x1005 has been reserved
>system 00:02: ioport range 0x1008-0x100f has been reserved
>system 00:03: ioport range 0xf400-0xf4fe has been reserved
>system 00:03: ioport range 0x1006-0x1007 has been reserved
>system 00:03: ioport range 0x100a-0x1059 could not be reserved
>system 00:03: ioport range 0x1060-0x107f has been reserved
>system 00:03: ioport range 0x1080-0x10bf has been reserved
>system 00:03: ioport range 0x10c0-0x10df has been reserved
>system 00:03: ioport range 0x1010-0x102f has been reserved
>system 00:03: ioport range 0x809-0x809 has been reserved
>system 00:08: ioport range 0xc80-0xcff could not be reserved
>system 00:08: ioport range 0x910-0x91f has been reserved
>system 00:08: ioport range 0x920-0x92f has been reserved
>system 00:08: ioport range 0xcb0-0xcbf has been reserved
>system 00:08: ioport range 0x930-0x97f has been reserved
>system 00:0b: iomem range 0xfed00000-0xfed003ff has been reserved
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: 0xefd00000-0xefdfffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.3
>  IO window: d000-dfff
>  MEM window: 0xefa00000-0xefcfffff
>  PREFETCH window: 0x00000000e0000000-0x00000000e01fffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: 0xef900000-0xef9fffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 10, 4194304 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>debug: unmapping init memory ffff810037c7c000..ffff810037ff0000
>Simple Boot Flag at 0x79 set to 0x1
>audit: initializing netlink socket (disabled)
>type=2000 audit(1206717129.750:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:02.0: Boot video device
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>Allocate Port Service[0000:00:1c.1:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>Allocate Port Service[0000:00:1c.3:pcie02]
>Allocate Port Service[0000:00:1c.3:pcie03]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: SSDT 7F6940F2, 0286 (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
>ACPI: SSDT 7F693EA7, 01C6 (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 7F694378, 00C4 (r1  PmRef  Cpu1Ist     3000 INTL 20050624)
>ACPI: SSDT 7F69406D, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: ACPI0007:01 is registered as cooling_device1
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: LNXTHERM:01 is registered as thermal_zone0
>ACPI: Thermal Zone [THM] (69 C)
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>agpgart: Detected an Intel 945GM Chipset.
>agpgart: Detected 7932K stolen memory.
>agpgart: AGP aperture is 256M @ 0xd0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>isa bounce pool size: 16 pages
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k
>cpuidle: using governor ladder
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04713/0x200000
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>registered taskstats version 1
>  Magic number: 0:843:235
>debug: unmapping init memory ffffffff814ce000..ffffffff81586000
>Write protecting the kernel read-only data: 1152k
>Clocksource tsc unstable (delta = -89830223 ns)
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa80000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25-0.163.rc7.git1.fc9.x86_64 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
>modprobe used greatest stack depth: 4512 bytes left
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25-0.163.rc7.git1.fc9.x86_64 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25-0.163.rc7.git1.fc9.x86_64 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bf40
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25-0.163.rc7.git1.fc9.x86_64 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 1-5: new high speed USB device using ehci_hcd and address 3
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25-0.163.rc7.git1.fc9.x86_64 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.3
>modprobe used greatest stack depth: 4464 bytes left
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ata_piix 0000:00:1f.2: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
>ata1.00: HPA detected: current 192426570, native 195371568
>ata1.00: ATA-7: Hitachi HTS721010G9SA00, MCZOC10H, max UDMA/100
>ata1.00: 192426570 sectors, multi 8: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/100
>usb 1-5: configuration #1 chosen from 1 choice
>usb 1-5: New USB device found, idVendor=046d, idProduct=08c6
>usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=2
>usb 1-5: SerialNumber: 23D8CC91
>usb 3-1: new full speed USB device using uhci_hcd and address 2
>ata2.00: ATAPI: PHILIPS DVD+/-RW SDVD8820, AD15, max UDMA/33
>usb 3-1: configuration #1 chosen from 1 choice
>usb 3-1: New USB device found, idVendor=413c, idProduct=8126
>usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-1: Product: BCM2045
>usb 3-1: Manufacturer: Broadcom Corp
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS72101 MCZO PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 192426570 512-byte hardware sectors (98522 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 192426570 512-byte hardware sectors (98522 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            PHILIPS  DVD+-RW SDVD8820 AD15 PQ: 0 ANSI: 5
>modprobe used greatest stack depth: 2768 bytes left
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>kjournald2 starting.  Commit interval 5 seconds
>EXT4-fs: mounted filesystem with ordered data mode.
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>SELinux:8192 avtab hash slots allocated. Num of rules:170232
>SELinux:8192 avtab hash slots allocated. Num of rules:170232
>security:  8 users, 12 roles, 2284 types, 114 bools, 1 sens, 1024 cats
>security:  72 classes, 170232 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext4dev), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>type=1403 audit(1206717139.256:2): policy loaded auid=4294967295 ses=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>intel_rng: FWH not detected
>input: PC Speaker as /devices/platform/pcspkr/input/input3
>Linux video capture interface: v2.00
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
>ACPI: Lid Switch [LID]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
>iTCO_vendor_support: vendor-support=0
>ACPI: Power Button (CM) [PBTN]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6
>ACPI: Sleep Button (CM) [SBTN]
>Bluetooth: Core ver 2.11
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: AC Adapter [AC] (on-line)
>ACPI: WMI: Mapper loaded
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>uvcvideo: Found UVC 1.00 device <unnamed> (046d:08c6)
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (v0.1.0)
>dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci: SDHCI controller found at 0000:03:01.1 [1180:0822] (rev 19)
>ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 18
>mmc0: SDHCI at 0xef9fd500 irq 18 DMA
>[drm] Initialized drm 1.1.0 20060810
>Bluetooth: HCI USB driver ver 2.9
>usbcore: registered new interface driver hci_usb
>ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 19
>firewire_ohci: Added fw-ohci device 0000:03:01.0, OHCI version 1.10
>firewire_core: created device fw0: GUID 384fc000086ee141, S400
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26kds
>iwl3945: Copyright(c) 2003-2008 Intel Corporation
>ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:0c:00.0 to 64
>iwl3945: Detected Intel Wireless WiFi Link 3945ABG
>iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels
>phy0: Selected rate control algorithm 'iwl-3945-rs'
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>[drm] Initialized i915 1.12.0 20071122 on minor 0
>ACPI: PCI interrupt for device 0000:0c:00.0 disabled
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
>b44.c:v2.0
>eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:15:c5:51:1e:fb
>ALSA sound/usb/usbaudio.c:2798: 3:3:3: add audio endpoint 0x86
>ALSA sound/usb/usbmixer.c:988: [5] FU [Mic Capture Switch] ch = 1, val = 0/1/1
>ALSA sound/usb/usbmixer.c:988: [5] FU [Mic Capture Volume] ch = 1, val = 5120/8192/1
>usbcore: registered new interface driver snd-usb-audio
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ALSA sound/pci/hda/hda_intel.c:1810: chipset global capabilities = 0x4401
>ALSA sound/pci/hda/hda_intel.c:749: codec_mask = 0x3
>ALSA sound/pci/hda/hda_codec.c:2236: hda_codec: model 'dell-m82' is selected for config 1028:1d7 (Dell XPS M1210)
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 0a pin config 02211211
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 0b pin config 408103ff
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 0c pin config 02a1123e
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 0d pin config 90100310
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 0e pin config 408003f1
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 0f pin config 0221121f
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 10 pin config 03451340
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 11 pin config 40c003f2
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 15 pin config 508003f3
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 1b pin config 405003f4
>ALSA sound/pci/hda/hda_codec.c:2857: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2861:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2865:    hp_outs=2 (0xa/0xf/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2866:    mono: mono_out=0x0
>ALSA sound/pci/hda/hda_codec.c:2874:    inputs: mic=0xc, fmic=0x0, line=0x0, fline=0x0, cd=0x0, aux=0x0
>ALSA sound/pci/hda/patch_sigmatel.c:2080: stac92xx_add_dyn_out_pins: total dac count=4
>ALSA sound/pci/hda/patch_sigmatel.c:2202: dac_nids=3 (0x2/0x5/0x3/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Side Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Headphone Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Headphone Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Speaker Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave External Speaker Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Speaker2 Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Side Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Headphone Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Headphone Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Speaker Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave External Speaker Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Speaker2 Playback Switch, skipped
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>device-mapper: multipath: version 1.0.5 loaded
>loop: module loaded
>EXT4 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-2, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-3, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-1, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda5, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 2097144k swap on /dev/mapper/vg0-FCswap.  Priority:-1 extents:1 across:2097144k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>b44: eth0: Link is up at 100 Mbps, full duplex.
>b44: eth0: Flow control is off for TX and off for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:12:17:6d:3b:e3
>wlan0: RX authentication from 00:12:17:6d:3b:e3 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:12:17:6d:3b:e3
>wlan0: RX AssocResp from 00:12:17:6d:3b:e3 (capab=0x401 status=0 aid=11)
>wlan0: associated
>wlan0: switched to long barker preamble (BSSID=00:12:17:6d:3b:e3)
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: disassociate(reason=3)
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>printk: 32 messages suppressed.
>wlan0: RX non-WEP frame, but expected encryption
>ALSA sound/usb/usbaudio.c:1353: setting usb interface 3:3
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 0a pin config 02211211
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 0b pin config 408103ff
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 0c pin config 02a1123e
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 0d pin config 90100310
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 0e pin config 408003f1
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 0f pin config 0221121f
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 10 pin config 03451340
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 11 pin config 40c003f2
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 15 pin config 508003f3
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 1b pin config 405003f4
>ALSA sound/pci/hda/hda_intel.c:596: hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x00af0900
>eth0: no IPv6 routers present
>wlan0: no IPv6 routers present
>printk: 24 messages suppressed.
>wlan0: RX non-WEP frame, but expected encryption
>printk: 10 messages suppressed.
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX disassociation from 00:12:17:6d:3b:e3 (reason=7)
>wlan0: RX disassociation from 00:12:17:6d:3b:e3 (reason=7)
>wlan0: RX disassociation from 00:12:17:6d:3b:e3 (reason=7)
>wlan0: RX disassociation from 00:12:17:6d:3b:e3 (reason=7)
>wlan0: RX disassociation from 00:12:17:6d:3b:e3 (reason=7)
>wlan0: RX disassociation from 00:12:17:6d:3b:e3 (reason=7)
>wlan0: RX disassociation from 00:12:17:6d:3b:e3 (reason=7)
>wlan0: RX disassociation from 00:12:17:6d:3b:e3 (reason=7)
>wlan0: RX disassociation from 00:12:17:6d:3b:e3 (reason=7)
>wlan0: RX disassociation from 00:12:17:6d:3b:e3 (reason=7)
>wlan0: RX disassociation from 00:12:17:6d:3b:e3 (reason=7)
>wlan0: associate with AP 00:12:17:6d:3b:e3
>printk: 12 messages suppressed.
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX ReassocResp from 00:12:17:6d:3b:e3 (capab=0x401 status=0 aid=11)
>wlan0: associated
>wlan0: disassociate(reason=3)
>printk: 8 messages suppressed.
>wlan0: RX non-WEP frame, but expected encryption
>ALSA sound/usb/usbaudio.c:1353: setting usb interface 3:3
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 0a pin config 02211211
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 0b pin config 408103ff
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 0c pin config 02a1123e
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 0d pin config 90100310
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 0e pin config 408003f1
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 0f pin config 0221121f
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 10 pin config 03451340
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 11 pin config 40c003f2
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 15 pin config 508003f3
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 1b pin config 405003f4
>printk: 13 messages suppressed.
>wlan0: RX non-WEP frame, but expected encryption
>printk: 26 messages suppressed.
>wlan0: RX non-WEP frame, but expected encryption
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 00000000,00000003
>  groups: 00000000,00000001 00000000,00000002
>  domain 1: span 00000000,00000003
>   groups: 00000000,00000003
>CPU1 attaching sched-domain:
> domain 0: span 00000000,00000003
>  groups: 00000000,00000002 00000000,00000001
>  domain 1: span 00000000,00000003
>   groups: 00000000,00000003
>printk: 22 messages suppressed.
>wlan0: RX non-WEP frame, but expected encryption
>printk: 14 messages suppressed.
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX disassociation from 00:12:17:6d:3b:e3 (reason=7)
>wlan0: RX disassociation from 00:12:17:6d:3b:e3 (reason=7)
>wlan0: RX disassociation from 00:12:17:6d:3b:e3 (reason=7)
>wlan0: RX disassociation from 00:12:17:6d:3b:e3 (reason=7)
>wlan0: RX disassociation from 00:12:17:6d:3b:e3 (reason=7)
>wlan0: RX disassociation from 00:12:17:6d:3b:e3 (reason=7)
>wlan0: RX disassociation from 00:12:17:6d:3b:e3 (reason=7)
>wlan0: RX disassociation from 00:12:17:6d:3b:e3 (reason=7)
>wlan0: RX disassociation from 00:12:17:6d:3b:e3 (reason=7)
>wlan0: RX disassociation from 00:12:17:6d:3b:e3 (reason=7)
>wlan0: RX disassociation from 00:12:17:6d:3b:e3 (reason=7)
>wlan0: RX disassociation from 00:12:17:6d:3b:e3 (reason=7)
>wlan0: RX disassociation from 00:12:17:6d:3b:e3 (reason=7)
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:17:31:ed:ce:b4
>wlan0: RX authentication from 00:17:31:ed:ce:b4 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:17:31:ed:ce:b4
>wlan0: RX AssocResp from 00:17:31:ed:ce:b4 (capab=0x411 status=0 aid=2)
>wlan0: associated
>printk: 2 messages suppressed.
>wlan0: switched to short barker preamble (BSSID=00:17:31:ed:ce:b4)
>wlan0: switched to long barker preamble (BSSID=00:17:31:ed:ce:b4)
>wlan0: switched to short barker preamble (BSSID=00:17:31:ed:ce:b4)
>wlan0: CTS protection disabled (BSSID=00:17:31:ed:ce:b4)
>wlan0: CTS protection enabled (BSSID=00:17:31:ed:ce:b4)
>wlan0: CTS protection disabled (BSSID=00:17:31:ed:ce:b4)
>wlan0: CTS protection enabled (BSSID=00:17:31:ed:ce:b4)
>wlan0: CTS protection disabled (BSSID=00:17:31:ed:ce:b4)
>wlan0: CTS protection enabled (BSSID=00:17:31:ed:ce:b4)

Actions: View

Attachments on bug 437854: 299514