Attachment 299597 Details for Bug 438860 – dmesg

dmesg

dmesg (text/plain), 33.06 KB, created by Vaclav "sHINOBI" Misek on 2008-03-29 23:21:44 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Vaclav "sHINOBI" Misek

Created: 2008-03-29 23:21:44 UTC

Size: 33.06 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.24.3-50.fc8 (mockbuild@hammer2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Thu Mar 20 13:39:08 EDT 2008
>Command line: ro root=/dev/VolGroup00/LogVol00
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable)
> BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS)
> BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
> BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 851680) 1 entries of 3200 used
>Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used
>end_pfn_map = 1245184
>DMI 2.4 present.
>ACPI: RSDP 000F7070, 0014 (r0 GBT   )
>ACPI: RSDT CFEE3000, 0038 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
>ACPI: FACP CFEE3040, 0074 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
>ACPI: DSDT CFEE30C0, 5DDA (r1 GBT    GBTUACPI     1000 MSFT  3000000)
>ACPI: FACS CFEE0000, 0040
>ACPI: SSDT CFEE8F80, 0544 (r1 PTLTD  POWERNOW        1  LTP        1)
>ACPI: HPET CFEE9500, 0038 (r1 GBT    GBTUACPI 42302E31 GBTU       98)
>ACPI: MCFG CFEE9540, 003C (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
>ACPI: APIC CFEE8EC0, 0084 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000130000000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 851680) 1 entries of 3200 used
>Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used
>Bootmem setup node 0 0000000000000000-0000000130000000
> [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
> [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
> [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
> [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
> [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
> [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
> [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
> [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
> [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
> [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
> [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
> [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
> [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
> [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
> [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on node 0
> [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on node 0
> [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on node 0
> [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on node 0
> [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on node 0
> [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on node 0
> [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on node 0
> [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810006600000 on node 0
> [ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810006a00000 on node 0
> [ffffe20003800000-ffffe200039fffff] PMD ->ffff810006e00000 on node 0
> [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810007200000 on node 0
> [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810007600000 on node 0
> [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810007a00000 on node 0
> [ffffe20004000000-ffffe200041fffff] PMD ->ffff810007e00000 on node 0
> [ffffe20004200000-ffffe200043fffff] PMD ->ffff810008200000 on node 0
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1245184
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   851680
>    0:  1048576 ->  1245184
>On node 0 totalpages: 1048191
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1328 pages reserved
>  DMA zone: 2615 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 833304 pages, LIFO batch:31
>  Normal zone: 2688 pages used for memmap
>  Normal zone: 193920 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>ATI board detected. Disabling timer routing over 8254.
>ACPI: PM-Timer IO Port: 0x3008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>Processor #2
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
>Processor #3
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0x10b9a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>swsusp: Registered nosave memory region: 00000000cfee0000 - 00000000cfee3000
>swsusp: Registered nosave memory region: 00000000cfee3000 - 00000000cfef0000
>swsusp: Registered nosave memory region: 00000000cfef0000 - 00000000cff00000
>swsusp: Registered nosave memory region: 00000000cff00000 - 00000000e0000000
>swsusp: Registered nosave memory region: 00000000e0000000 - 00000000f0000000
>swsusp: Registered nosave memory region: 00000000f0000000 - 00000000fec00000
>swsusp: Registered nosave memory region: 00000000fec00000 - 0000000100000000
>Allocating PCI resources starting at d0000000 (gap: cff00000:10100000)
>SMP: Allowing 4 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 42248 bytes of per cpu data
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1029839
>Policy zone: Normal
>Kernel command line: ro root=/dev/VolGroup00/LogVol00
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>hpet clockevent registered
>TSC calibrated against HPET
>Marking TSC unstable due to TSCs unsynchronized
>time.c: Detected 2310.509 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Checking aperture...
>CPU 0: aperture @ 8000000 size 32 MB
>Aperture too small (32 MB)
>No AGP bridge found
>Your BIOS doesn't leave a aperture memory hole
>Please enable the IOMMU option in the BIOS setup
>This costs you 64 MB of RAM
>Mapping aperture over 65536 KB of RAM @ c000000
>Memory: 4057836k/4980736k available (2491k kernel code, 134928k reserved, 1390k data, 332k init)
>SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
>Calibrating delay using timer specific routine.. 4627.78 BogoMIPS (lpj=2313894)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>APIC timer calibration result 12557106
>Detected 12.557 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/4 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4621.34 BogoMIPS (lpj=2310670)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>AMD Phenom(tm) 9600 Quad-Core Processor stepping 02
>SMP alternatives: switching to SMP code
>Booting processor 2/4 APIC 0x2
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 4621.22 BogoMIPS (lpj=2310610)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 2/2 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 3
>AMD Phenom(tm) 9600 Quad-Core Processor stepping 02
>SMP alternatives: switching to SMP code
>Booting processor 3/4 APIC 0x3
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 4621.23 BogoMIPS (lpj=2310616)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 3/3 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 2
>AMD Phenom(tm) 9600 Quad-Core Processor stepping 02
>Brought up 4 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=224 bytes
>sizeof(task_struct)=2224 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000000,0000000f
>  groups: 00000000,00000001 00000000,00000002 00000000,00000004 00000000,00000008
>  domain 1: span 00000000,0000000f
>   groups: 00000000,0000000f
>CPU1 attaching sched-domain:
> domain 0: span 00000000,0000000f
>  groups: 00000000,00000002 00000000,00000004 00000000,00000008 00000000,00000001
>  domain 1: span 00000000,0000000f
>   groups: 00000000,0000000f
>CPU2 attaching sched-domain:
> domain 0: span 00000000,0000000f
>  groups: 00000000,00000004 00000000,00000008 00000000,00000001 00000000,00000002
>  domain 1: span 00000000,0000000f
>   groups: 00000000,0000000f
>CPU3 attaching sched-domain:
> domain 0: span 00000000,0000000f
>  groups: 00000000,00000008 00000000,00000001 00000000,00000002 00000000,00000004
>  domain 1: span 00000000,0000000f
>   groups: 00000000,0000000f
>net_namespace: 120 bytes
>Time: 14:31:47  Date: 03/29/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Transparent bridge - 0000:00:14.4
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 14 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>DMAR:No DMAR devices found
>PCI-DMA: Disabling AGP.
>PCI-DMA: aperture base @ c000000 size 65536 KB
>PCI-DMA: using GART IOMMU.
>PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 32-bit timers, 14318180 Hz
>Time: hpet clocksource has been installed.
>Switched to high resolution mode on CPU 3
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 2
>Switched to high resolution mode on CPU 0
>system 00:01: ioport range 0x4d0-0x4d1 has been reserved
>system 00:01: ioport range 0x220-0x225 has been reserved
>system 00:01: ioport range 0x290-0x294 has been reserved
>system 00:02: ioport range 0x3100-0x311f has been reserved
>system 00:02: ioport range 0x228-0x22f has been reserved
>system 00:02: ioport range 0x40b-0x40b has been reserved
>system 00:02: ioport range 0x4d6-0x4d6 has been reserved
>system 00:02: ioport range 0xc00-0xc01 has been reserved
>system 00:02: ioport range 0xc14-0xc14 has been reserved
>system 00:02: ioport range 0xc50-0xc52 has been reserved
>system 00:02: ioport range 0xc6c-0xc6d has been reserved
>system 00:02: ioport range 0xc6f-0xc6f has been reserved
>system 00:02: ioport range 0xcd0-0xcd1 has been reserved
>system 00:02: ioport range 0xcd2-0xcd3 has been reserved
>system 00:02: ioport range 0xcd4-0xcdf has been reserved
>system 00:02: ioport range 0x3000-0x30fe has been reserved
>system 00:02: ioport range 0x3210-0x3217 has been reserved
>system 00:02: ioport range 0xb00-0xb1f could not be reserved
>system 00:02: ioport range 0x238-0x23f has been reserved
>system 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved
>system 00:0d: iomem range 0xd6000-0xd7fff has been reserved
>system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
>system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
>system 00:0d: iomem range 0xfc000-0xfffff could not be reserved
>system 00:0d: iomem range 0xcfee0000-0xcfefffff could not be reserved
>system 00:0d: iomem range 0xffff0000-0xffffffff has been reserved
>system 00:0d: iomem range 0x0-0x9ffff could not be reserved
>system 00:0d: iomem range 0x100000-0xcfedffff could not be reserved
>system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved
>system 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved
>system 00:0d: iomem range 0xfff80000-0xfffeffff has been reserved
>PCI: Bridge: 0000:00:02.0
>  IO window: b000-bfff
>  MEM window: fa000000-fcffffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Bridge: 0000:00:06.0
>  IO window: a000-afff
>  MEM window: fdf00000-fdffffff
>  PREFETCH window: fde00000-fdefffff
>PCI: Bridge: 0000:00:07.0
>  IO window: e000-efff
>  MEM window: fdd00000-fddfffff
>  PREFETCH window: fdc00000-fdcfffff
>PCI: Bridge: 0000:00:09.0
>  IO window: d000-dfff
>  MEM window: fdb00000-fdbfffff
>  PREFETCH window: fda00000-fdafffff
>PCI: Bridge: 0000:00:0a.0
>  IO window: c000-cfff
>  MEM window: fd900000-fd9fffff
>  PREFETCH window: fd800000-fd8fffff
>PCI: Bridge: 0000:00:14.4
>  IO window: 9000-9fff
>  MEM window: fd700000-fd7fffff
>  PREFETCH window: fd600000-fd6fffff
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 4120k freed
>audit: initializing netlink socket (disabled)
>audit(1206801106.702:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 3866953E5733719F
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:06.0:pcie00]
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:07.0:pcie00]
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:09.0:pcie00]
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0a.0:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 1 AMD Phenom(tm) 9600 Quad-Core Processor processors (4 cpu cores) (version 2.20.00)
>powernow-k8:    0 : fid 0x0 did 0x0 (2300 MHz)
>powernow-k8:    1 : fid 0x0 did 0x0 (1150 MHz)
>registered taskstats version 1
>  Magic number: 0:124:537
>Freeing unused kernel memory: 332k freed
>Write protecting the kernel read-only data: 1080k
>ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:13.5: EHCI Host Controller
>ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:13.5: debug port 1
>ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
>ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.2: OHCI Host Controller
>ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17
>ohci_hcd 0000:00:13.3: OHCI Host Controller
>ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
>ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.4: OHCI Host Controller
>ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
>ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>USB Universal Host Controller Interface driver v3.0
>md: raid1 personality registered for level 1
>xor: automatically using best checksumming function: generic_sse
>   generic_sse: 10260.000 MB/sec
>xor: using function: generic_sse (10260.000 MB/sec)
>async_tx: api initialized (async)
>raid6: int64x1   2128 MB/s
>raid6: int64x2   2812 MB/s
>raid6: int64x4   2132 MB/s
>raid6: int64x8   2136 MB/s
>raid6: sse2x1    3199 MB/s
>raid6: sse2x2    5324 MB/s
>raid6: sse2x4    6101 MB/s
>raid6: using algorithm sse2x4 (6101 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ahci 0000:00:12.0: version 3.0
>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22
>ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
>ahci 0000:00:12.0: controller can't do PMP, turning off CAP_PMP
>ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part 
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
>ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
>ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
>ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: HPA detected: current 488395055, native 488397168
>ata1.00: ATA-6: ST3250310NS, SN04, max UDMA/133
>ata1.00: 488395055 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/133
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2.00: ATA-6: ST3250310NS, SN04, max UDMA/133
>ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata2.00: configured for UDMA/133
>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata3.00: HPA detected: current 488395055, native 488397168
>ata3.00: ATA-6: ST3250310NS, SN04, max UDMA/133
>ata3.00: 488395055 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata3.00: configured for UDMA/133
>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata4.00: ATA-6: ST3250310NS, SN04, max UDMA/133
>ata4.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata4.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      ST3250310NS      SN04 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 488395055 512-byte hardware sectors (250058 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 488395055 512-byte hardware sectors (250058 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: Direct-Access     ATA      ST3250310NS      SN04 PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2
>sd 1:0:0:0: [sdb] Attached SCSI disk
>scsi 2:0:0:0: Direct-Access     ATA      ST3250310NS      SN04 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sdc] 488395055 512-byte hardware sectors (250058 MB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sdc] 488395055 512-byte hardware sectors (250058 MB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1
>sd 2:0:0:0: [sdc] Attached SCSI disk
>scsi 3:0:0:0: Direct-Access     ATA      ST3250310NS      SN04 PQ: 0 ANSI: 5
>sd 3:0:0:0: [sdd] 488397168 512-byte hardware sectors (250059 MB)
>sd 3:0:0:0: [sdd] Write Protect is off
>sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:0:0: [sdd] 488397168 512-byte hardware sectors (250059 MB)
>sd 3:0:0:0: [sdd] Write Protect is off
>sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdd: sdd1
>sd 3:0:0:0: [sdd] Attached SCSI disk
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
>ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>scsi4 : ahci
>scsi5 : ahci
>ata5: SATA max UDMA/133 abar m8192@0xfdbfe000 port 0xfdbfe100 irq 17
>ata6: SATA max UDMA/133 abar m8192@0xfdbfe000 port 0xfdbfe180 irq 17
>ata5: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link down (SStatus 0 SControl 300)
>ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
>ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
>ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
>PCI: Setting latency timer of device 0000:05:00.0 to 64
>scsi6 : ahci
>scsi7 : ahci
>ata7: SATA max UDMA/133 abar m8192@0xfd9fe000 port 0xfd9fe100 irq 18
>ata8: SATA max UDMA/133 abar m8192@0xfd9fe000 port 0xfd9fe180 irq 18
>ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata7.00: ATA-6: HDS722516VLSA80, V34OA6MA, max UDMA/100
>ata7.00: 321672960 sectors, multi 0: LBA48 
>ata7.00: configured for UDMA/100
>ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata8.00: ATAPI: TSSTcorp CDDVDW SH-S203P, SB00, max UDMA/100, ATAPI AN
>ata8.00: configured for UDMA/100
>scsi 6:0:0:0: Direct-Access     ATA      HDS722516VLSA80  V34O PQ: 0 ANSI: 5
>sd 6:0:0:0: [sde] 321672960 512-byte hardware sectors (164697 MB)
>sd 6:0:0:0: [sde] Write Protect is off
>sd 6:0:0:0: [sde] Mode Sense: 00 3a 00 00
>sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 6:0:0:0: [sde] 321672960 512-byte hardware sectors (164697 MB)
>sd 6:0:0:0: [sde] Write Protect is off
>sd 6:0:0:0: [sde] Mode Sense: 00 3a 00 00
>sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sde: sde1
>sd 6:0:0:0: [sde] Attached SCSI disk
>scsi 7:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S203P  SB00 PQ: 0 ANSI: 5
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
>PCI: Enabling device 0000:04:00.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:04:00.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:04:00.1 to 64
>scsi8 : pata_jmicron
>scsi9 : pata_jmicron
>ata9: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 17
>ata10: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 17
>PCI: Enabling device 0000:05:00.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:05:00.1[B] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:05:00.1 to 64
>scsi10 : pata_jmicron
>scsi11 : pata_jmicron
>ata11: PATA max UDMA/100 cmd 0xcf00 ctl 0xce00 bmdma 0xcb00 irq 18
>ata12: PATA max UDMA/100 cmd 0xcd00 ctl 0xcc00 bmdma 0xcb08 irq 18
>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
>scsi12 : pata_atiixp
>scsi13 : pata_atiixp
>ata13: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
>ata14: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
>md: md1 stopped.
>md: bind<sdb2>
>md: bind<sda2>
>raid1: raid set md1 active with 2 out of 2 mirrors
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:8192 avtab hash slots allocated.Num of rules:219042
>SELinux:8192 avtab hash slots allocated.Num of rules:219042
>security:  8 users, 12 roles, 2385 types, 114 bools, 1 sens, 1024 cats
>security:  67 classes, 219042 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>audit(1206801125.584:2): policy loaded auid=4294967295
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 7:0:0:0: Attached scsi CD-ROM sr0
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>sd 3:0:0:0: Attached scsi generic sg3 type 0
>sd 6:0:0:0: Attached scsi generic sg4 type 0
>sr 7:0:0:0: Attached scsi generic sg5 type 5
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input4
>ACPI: Power Button (CM) [PWRB]
>r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>eth0: RTL8168b/8111b at 0xffffc20001050000, 00:1a:4d:5b:0b:7d, XID 38000000 IRQ 2298
>r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>eth1: RTL8168b/8111b at 0xffffc20001052000, 00:1a:4d:5b:11:cd, XID 38000000 IRQ 2297
>input: PC Speaker as /class/input/input5
>ACPI: PCI Interrupt 0000:06:0e.0[A] -> GSI 22 (level, low) -> IRQ 22
>parport_pc 00:09: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
>firewire_ohci: Added fw-ohci device 0000:06:0e.0, OHCI version 1.10
>ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
>ALSA sound/pci/hda/hda_intel.c:732: codec_mask = 0x8
>hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
>ALSA sound/pci/hda/hda_codec.c:2757: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0)
>ALSA sound/pci/hda/hda_codec.c:2761:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2765:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2773:    inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x0
>firewire_core: created device fw0: GUID 00ca66ed00001a4d, S400
>md: md0 stopped.
>md: bind<sdb1>
>md: bind<sda1>
>raid1: raid set md0 active with 2 out of 2 mirrors
>md: md2 stopped.
>md: bind<sdd1>
>md: bind<sdc1>
>raid1: raid set md2 active with 2 out of 2 mirrors
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-4, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-1, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-3, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on md0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev md0, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol02.  Priority:-1 extents:1 across:2031608k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts

Actions: View

Attachments on bug 438860: 299051 | 299597