Attachment 299643 Details for Bug 439715 – full dmesg

full dmesg

dmesg-libvirt.txt (text/plain), 34.27 KB, created by Mihai Harpau on 2008-03-30 22:02:35 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Mihai Harpau

Created: 2008-03-30 22:02:35 UTC

Size: 34.27 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.24.4-64.fc8 (mockbuild@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Sat Mar 29 09:54:46 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003f7d0000 (usable)
> BIOS-e820: 000000003f7d0000 - 000000003f7efc00 (reserved)
> BIOS-e820: 000000003f7efc00 - 000000003f7fb000 (ACPI NVS)
> BIOS-e820: 000000003f7fb000 - 000000003f800000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved)
> BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
> BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>119MB HIGHMEM available.
>896MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 260048) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   260048
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   260048
>On node 0 totalpages: 260048
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 239 pages used for memmap
>  HighMem zone: 30433 pages, LIFO batch:7
>  Movable zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000FE270, 0014 (r0 HP    )
>ACPI: RSDT 3F7EFC84, 0034 (r1 HP     099C     20040620 HP          1)
>ACPI: FACP 3F7EFC00, 0084 (r2 HP     099C            2 HP          1)
>ACPI: DSDT 3F7EFD50, 7D61 (r1 HP       DAU00     10000 MSFT  100000E)
>ACPI: FACS 3F7FAE80, 0040
>ACPI: APIC 3F7EFCB8, 005A (r1 HP     099C            1 HP          1)
>ACPI: MCFG 3F7EFD14, 003C (r1 HP     099C            1 HP          1)
>ACPI: SSDT 3F7F7AB1, 0371 (r1 HP       HPQPpc     1001 MSFT  100000E)
>ACPI: DMI detected: Hewlett-Packard
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfec01000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:13 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 40000000 (gap: 3f800000:a0800000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
>swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 258017
>Kernel command line: ro root=/dev/sysop/root vga=773 rhgb quiet
>mapped APIC to ffffb000 (fec01000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07bb000 soft=c079b000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1867.072 MHz processor.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1022264k/1040192k available (2237k kernel code, 17092k reserved, 1131k data, 288k init, 122688k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0750000 - 0xc0798000   ( 288 kB)
>      .data : 0xc062f789 - 0xc074a724   (1131 kB)
>      .text : 0xc0400000 - 0xc062f789   (2237 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 3736.24 BogoMIPS (lpj=1868120)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 00000000
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: After all inits, caps: afe9f3ff 00100000 00000000 00002040 00000180 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>CPU0: Intel(R) Pentium(R) M processor 1.86GHz stepping 08
>Total of 1 processors activated (3736.24 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1680 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000001
>  groups: 00000001
>net_namespace: 64 bytes
>HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
>Booting paravirtualized kernel on bare hardware
>Time:  7:51:23  Date: 03/30/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=16
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in interrupt mode
>ACPI: PCI Root Bridge [C002] (0000:00)
>Force enabled HPET at base address 0xfed00000
>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 1100-113f claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C002.C068._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C002.C0CC._PRT]
>ACPI: PCI Interrupt Link [C0D8] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [C0D9] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C0DA] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C0DB] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C0EE] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C0EF] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [C0F0] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C0F1] (IRQs 10 11) *0, disabled.
>ACPI: Power Resource [C1A6] (on)
>ACPI: Power Resource [C1AE] (on)
>ACPI: Power Resource [C1B5] (on)
>ACPI: Power Resource [C1C5] (on)
>ACPI: Power Resource [C248] (off)
>ACPI: Power Resource [C249] (off)
>ACPI: Power Resource [C24A] (off)
>ACPI: Power Resource [C24B] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 14 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet clockevent registered
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Time: tsc clocksource has been installed.
>system 00:00: iomem range 0x0-0x9ffff could not be reserved
>system 00:00: iomem range 0xe0000-0xfffff could not be reserved
>system 00:00: iomem range 0x100000-0x3f7fffff could not be reserved
>system 00:0b: ioport range 0x500-0x57f has been reserved
>system 00:0b: iomem range 0xffb00000-0xffbfffff could not be reserved
>system 00:0b: iomem range 0xfff00000-0xffffffff could not be reserved
>system 00:0c: ioport range 0x4d0-0x4d1 has been reserved
>system 00:0c: ioport range 0x1000-0x107f has been reserved
>system 00:0c: ioport range 0x1100-0x113f has been reserved
>system 00:0c: ioport range 0x1200-0x121f has been reserved
>system 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved
>system 00:0c: iomem range 0xfec00000-0xfec000ff could not be reserved
>system 00:0c: iomem range 0xfed20000-0xff41ffff could not be reserved
>system 00:0c: iomem range 0xfed90000-0xfed9afff could not be reserved
>system 00:0d: iomem range 0xfeda0000-0xfedbffff could not be reserved
>system 00:0d: iomem range 0xfec01000-0xfec01fff could not be reserved
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bus 3, cardbus bridge: 0000:02:06.0
>  IO window: 00003000-000030ff
>  IO window: 00003400-000034ff
>  PREFETCH window: 40000000-43ffffff
>  MEM window: 48000000-4bffffff
>PCI: Bus 4, cardbus bridge: 0000:02:06.1
>  IO window: 00003800-000038ff
>  IO window: 00003c00-00003cff
>  PREFETCH window: 44000000-47ffffff
>  MEM window: 4c000000-4fffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 3000-3fff
>  MEM window: d0000000-d03fffff
>  PREFETCH window: 40000000-47ffffff
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 17
>ACPI: PCI Interrupt 0000:02:06.1[B] -> GSI 19 (level, low) -> IRQ 18
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3656k freed
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1206863483.624:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key A149FFC6EE301D40
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 1536k, total 7872k
>vesafb: mode is 1024x768x8, linelength=1024, pages=9
>vesafb: scrolling: redraw
>vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>ACPI: Transitioning device [C24C] to D3
>ACPI: Transitioning device [C24C] to D3
>ACPI: Fan [C24C] (off)
>ACPI: Transitioning device [C24D] to D3
>ACPI: Transitioning device [C24D] to D3
>ACPI: Fan [C24D] (off)
>ACPI: Transitioning device [C24E] to D3
>ACPI: Transitioning device [C24E] to D3
>ACPI: Fan [C24E] (off)
>ACPI: Transitioning device [C24F] to D3
>ACPI: Transitioning device [C24F] to D3
>ACPI: Fan [C24F] (off)
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [C000] (supports 8 throttling states)
>ACPI: Thermal Zone [TZ1] (69 C)
>ACPI: Thermal Zone [TZ2] (52 C)
>ACPI: Thermal Zone [TZ3] (26 C)
>ACPI: Thermal Zone [TZ4] (40 C)
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected an Intel 915GM Chipset.
>agpgart: Detected 7932K stolen memory.
>agpgart: AGP aperture is 256M @ 0xc0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS2 at I/O 0x3e8 (irq = 3) is a 16550A
>00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 22 (level, low) -> IRQ 19
>ACPI: PCI interrupt for device 0000:00:1e.3 disabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:02:06.0 [103c:099c]
>Yenta: Using INTVAL to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:02:06.0, mfunc 0x01aa1b22, devctl 0x64
>Yenta: ISA IRQ mask 0x0cf8, PCI irq 17
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
>cs: IO port probe 0x3000-0x3fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd03fffff
>pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x47ffffff
>Yenta: CardBus bridge found at 0000:02:06.1 [103c:099c]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:02:06.1, mfunc 0x01aa1b22, devctl 0x64
>Yenta: ISA IRQ mask 0x0cf8, PCI irq 18
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#02) from #04 to #07
>pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
>cs: IO port probe 0x3000-0x3fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd03fffff
>pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x47ffffff
>PNP: PS/2 Controller [PNP0303:C1C2,PNP0f13:C1C3] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor ladder
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000
>serio: Synaptics pass-through port at isa0060/serio4/input0
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 0:316:876
>Freeing unused kernel memory: 288k freed
>Write protecting the kernel read-only data: 894k
>Marking TSC unstable due to: TSC halts in idle.
>Time: hpet clocksource has been installed.
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd0580000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x00002000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 21, io base 0x00002020
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 17, io base 0x00002040
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 18, io base 0x00002060
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 3-2: new full speed USB device using uhci_hcd and address 2
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>usb 3-2: configuration #1 chosen from 1 choice
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x2580 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x2588 irq 15
>ata1.00: ATA-6: ST960822A, 3.02, max UDMA/100
>ata1.00: 117210240 sectors, multi 16: LBA48 
>ata1.01: ATAPI: HL-DT-ST DVD-RW GWA-4082N, CC15, max MWDMA2
>ata1.00: configured for UDMA/100
>ata1.01: configured for MWDMA2
>ata2: port disabled. ignoring.
>scsi 0:0:0:0: Direct-Access     ATA      ST960822A        3.02 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 0:0:1:0: CD-ROM            HL-DT-ST DVD-RW GWA-4082N CC15 PQ: 0 ANSI: 5
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1206863494.104:2): enforcing=1 old_enforcing=0 auid=4294967295
>SELinux:8192 avtab hash slots allocated.Num of rules:217682
>SELinux:8192 avtab hash slots allocated.Num of rules:217682
>security:  8 users, 12 roles, 2372 types, 114 bools, 1 sens, 1024 cats
>security:  67 classes, 217682 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-2, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>audit(1206863494.706:3): policy loaded auid=4294967295
>cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 0:0:1:0: Attached scsi generic sg1 type 5
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:1:0: Attached scsi CD-ROM sr0
>Bluetooth: Core ver 2.11
>hci_usb: Unknown symbol hci_suspend_dev
>hci_usb: Unknown symbol hci_free_dev
>hci_usb: Unknown symbol hci_resume_dev
>hci_usb: Unknown symbol hci_alloc_dev
>hci_usb: Unknown symbol hci_unregister_dev
>hci_usb: Unknown symbol hci_recv_fragment
>hci_usb: Unknown symbol hci_register_dev
>hci_usb: Unknown symbol hci_suspend_dev
>hci_usb: Unknown symbol hci_free_dev
>hci_usb: Unknown symbol hci_resume_dev
>hci_usb: Unknown symbol hci_alloc_dev
>hci_usb: Unknown symbol hci_unregister_dev
>hci_usb: Unknown symbol hci_recv_fragment
>hci_usb: Unknown symbol hci_register_dev
>hci_usb: Unknown symbol hci_suspend_dev
>hci_usb: Unknown symbol hci_free_dev
>hci_usb: Unknown symbol hci_resume_dev
>hci_usb: Unknown symbol hci_alloc_dev
>hci_usb: Unknown symbol hci_unregister_dev
>hci_usb: Unknown symbol hci_recv_fragment
>hci_usb: Unknown symbol hci_register_dev
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Sleep Button (CM) as /class/input/input4
>ACPI: Sleep Button (CM) [C1E8]
>input: Lid Switch as /class/input/input5
>ACPI: Lid Switch [C1E9]
>ACPI: AC Adapter [C172] (on-line)
>Bluetooth: HCI USB driver ver 2.9
>usbcore: registered new interface driver hci_usb
>ACPI: Battery Slot [C174] (battery present)
>ACPI: Battery Slot [C173] (battery absent)
>input: Video Bus as /class/input/input6
>ACPI: Video Device [C055] (multi-head: yes  rom: no  post: no)
>ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 22 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1e.3 to 64
>ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 21 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1e.2 to 64
>ieee80211_crypt: registered algorithm 'NULL'
>ieee80211: 802.11 data/management/control stack, git-1.1.13
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
>ipw2200: Copyright(c) 2003-2006 Intel Corporation
>ALSA sound/pci/ac97/ac97_codec.c:2121: AC'97 0 analog subsections not ready
>intel_rng: FWH not detected
>iTCO_vendor_support: vendor-support=0
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>input: PC Speaker as /class/input/input7
>NET: Registered protocol family 23
>ALSA sound/pci/ac97/ac97_codec.c:2869: ac97 quirk for HP nx6110/nc6120 (103c:099c)
>found SMC SuperIO Chip (devid=0x7a rev=00 base=0x004e): LPC47N227
>smsc_superio_flat(): fir: 0x100, sir: 0x3e8, dma: 03, irq: 3, mode: 0x0e
>smsc_ircc_present: can't get sir_base of 0x3e8
>intel8x0_measure_ac97_clock: measured 51633 usecs
>intel8x0: measured clock 213 rejected
>intel8x0: clocking to 48000
>ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 21 (level, low) -> IRQ 22
>ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
>parport_pc 00:04: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
>tg3.c:v3.86 (November 9, 2007)
>ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 16 (level, low) -> IRQ 16
>eth1: Tigon3 [partno(BCM95705A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:12:79:c0:ea:62
>eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
>eth1: dma_rwctrl[763f0000] dma_mask[64-bit]
>sdhci: SDHCI controller found at 0000:02:06.4 [104c:8034] (rev 0)
>ACPI: PCI Interrupt 0000:02:06.4[D] -> GSI 20 (level, low) -> IRQ 23
>sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
>mmc0: SDHCI at 0xd000a000 irq 23 DMA
>sdhci:slot1: Will use DMA mode even though HW doesn't fully claim to support it.
>mmc1: SDHCI at 0xd000b000 irq 23 DMA
>sdhci:slot2: Will use DMA mode even though HW doesn't fully claim to support it.
>mmc2: SDHCI at 0xd000c000 irq 23 DMA
>ACPI: PCI Interrupt 0000:02:06.3[D] -> GSI 20 (level, low) -> IRQ 23
>ACPI: PCI Interrupt 0000:02:06.2[C] -> GSI 22 (level, low) -> IRQ 19
>firewire_ohci: Added fw-ohci device 0000:02:06.2, OHCI version 1.10
>udev: renamed network interface eth0 to eth1
>udev: renamed network interface eth1_rename to eth0
>firewire_core: created device fw0: GUID 718b5000298d11a6, S400
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>Clocksource tsc unstable (delta = -110196884 ns)
>device-mapper: multipath: version 1.0.5 loaded
>loop: module loaded
>EXT3 FS on dm-2, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda2, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 1048568k swap on /dev/mapper/sysop-swap.  Priority:-1 extents:1 across:1048568k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>warning: process `kudzu' used the deprecated sysctl system call with 1.23.
>Loading iSCSI transport class v2.0-724.
>iscsi: registered transport (tcp)
>iscsi: registered transport (iser)
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>tg3: eth0: Link is up at 100 Mbps, full duplex.
>tg3: eth0: Flow control is on for TX and on for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>fuse init (API version 7.9)
>SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>eth0: no IPv6 routers present
>audit(1206863574.298:4): audit_pid=3837 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>intel_rng: FWH not detected
>found SMC SuperIO Chip (devid=0x7a rev=00 base=0x004e): LPC47N227
>smsc_superio_flat(): fir: 0x100, sir: 0x3e8, dma: 03, irq: 3, mode: 0x0e
>smsc_ircc_present: can't get sir_base of 0x3e8
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Bridge firewalling registered
>virbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>virbr0: starting userspace STP failed, starting kernel STP
>eth1: no IPv6 routers present
>[drm] Initialized drm 1.1.0 20060810
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>virbr0: no IPv6 routers present
>ipw2200: Firmware error detected.  Restarting.
>warning: process `/usr/sbin/syste' used the deprecated sysctl system call with 1.23.
>IPv6 over IPv4 tunneling driver
>sit0: Disabled Privacy Extensions
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>tg3: eth0: Link is up at 100 Mbps, full duplex.
>tg3: eth0: Flow control is on for TX and on for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: no IPv6 routers present
>ipw2200: Firmware error detected.  Restarting.
>ipw2200: Firmware error detected.  Restarting.
>ipw2200: Firmware error detected.  Restarting.
>ipw2200: Firmware error detected.  Restarting.
>ipw2200: Firmware error detected.  Restarting.
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>RTNL: assertion failed at net/core/fib_rules.c (627)
>Pid: 4378, comm: libvirtd Not tainted 2.6.24.4-64.fc8 #1
> [<c05d38ab>] fib_rules_event+0x4a/0xf1
> [<c062ddb9>] notifier_call_chain+0x2a/0x47
> [<c04427b8>] raw_notifier_call_chain+0x17/0x1a
> [<c05c7579>] dev_set_mac_address+0x43/0x48
> [<f8f41608>] tun_chr_ioctl+0x435/0x4dd [tun]
> [<c04d5d09>] file_has_perm+0x89/0x91
> [<c04930cc>] do_ioctl+0x4c/0x62
> [<c0493319>] vfs_ioctl+0x237/0x249
> [<c0493370>] sys_ioctl+0x45/0x5d
> [<c04051da>] syscall_call+0x7/0xb
> =======================
>RTNL: assertion failed at net/ipv4/devinet.c (1054)
>Pid: 4378, comm: libvirtd Not tainted 2.6.24.4-64.fc8 #1
> [<c0606099>] inetdev_event+0x56/0x46e
> [<c062c1ae>] _spin_lock_bh+0x8/0x18
> [<c05e0815>] rt_run_flush+0x68/0x8f
> [<c062ddb9>] notifier_call_chain+0x2a/0x47
> [<c04427b8>] raw_notifier_call_chain+0x17/0x1a
> [<c05c7579>] dev_set_mac_address+0x43/0x48
> [<f8f41608>] tun_chr_ioctl+0x435/0x4dd [tun]
> [<c04d5d09>] file_has_perm+0x89/0x91
> [<c04930cc>] do_ioctl+0x4c/0x62
> [<c0493319>] vfs_ioctl+0x237/0x249
> [<c0493370>] sys_ioctl+0x45/0x5d
> [<c04051da>] syscall_call+0x7/0xb
> =======================
>device vnet0 entered promiscuous mode
>virbr0: port 1(vnet0) entering listening state
>vnet0: no IPv6 routers present
>virbr0: port 1(vnet0) entering learning state
>virbr0: topology change detected, propagating
>virbr0: port 1(vnet0) entering forwarding state
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>printk: 17 messages suppressed.
>vnet0: received packet with  own address as source address
>printk: 2 messages suppressed.
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>printk: 17 messages suppressed.
>vnet0: received packet with  own address as source address
>printk: 2 messages suppressed.
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>printk: 17 messages suppressed.
>vnet0: received packet with  own address as source address
>printk: 3 messages suppressed.
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>vnet0: received packet with  own address as source address
>virbr0: port 1(vnet0) entering disabled state
>device vnet0 left promiscuous mode
>virbr0: port 1(vnet0) entering disabled state

Actions: View

Attachments on bug 439715: 299643 | 299687