Attachment 299977 Details for Bug 440101 – dmesg attached from boot with kernel 2.6.23.15-137

dmesg attached from boot with kernel 2.6.23.15-137

dmesg (text/plain), 24.05 KB, created by Zbigniew Fiedorowicz on 2008-04-01 21:57:33 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Zbigniew Fiedorowicz

Created: 2008-04-01 21:57:33 UTC

Size: 24.05 KB

patch

obsolete

>Linux version 2.6.23.15-137.fc8 (mockbuild@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Sun Feb 10 17:48:34 EST 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
> BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ead9000 (usable)
> BIOS-e820: 000000007ead9000 - 000000007eb19000 (ACPI NVS)
> BIOS-e820: 000000007eb19000 - 000000007f598000 (usable)
> BIOS-e820: 000000007f598000 - 000000007f5a0000 (reserved)
> BIOS-e820: 000000007f5a0000 - 000000007f62e000 (usable)
> BIOS-e820: 000000007f62e000 - 000000007f632000 (reserved)
> BIOS-e820: 000000007f632000 - 000000007f6aa000 (usable)
> BIOS-e820: 000000007f6aa000 - 000000007f6e9000 (ACPI NVS)
> BIOS-e820: 000000007f6e9000 - 000000007f6ed000 (usable)
> BIOS-e820: 000000007f6ed000 - 000000007f6ff000 (ACPI data)
> BIOS-e820: 000000007f6ff000 - 000000007f700000 (usable)
> BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>1143MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000fe200
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 521984) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   521984
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   521984
>On node 0 totalpages: 521984
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 2286 pages used for memmap
>  HighMem zone: 290322 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI 2.4 present.
>Using APIC driver default
>ACPI: RSDP 000FE020, 0014 (r0 INTEL )
>ACPI: RSDT 7F6FD038, 0050 (r1 INTEL  D945GCR        31       1000013)
>ACPI: FACP 7F6FC000, 0074 (r1 INTEL  D945GCR        31 MSFT  1000013)
>ACPI: DSDT 7F6F7000, 45F5 (r1 INTEL  D945GCR        31 MSFT  1000013)
>ACPI: FACS 7F6AA000, 0040
>ACPI: APIC 7F6F6000, 0078 (r1 INTEL  D945GCR        31 MSFT  1000013)
>ACPI: WDDT 7F6F5000, 0040 (r1 INTEL  D945GCR        31 MSFT  1000013)
>ACPI: MCFG 7F6F4000, 003C (r1 INTEL  D945GCR        31 MSFT  1000013)
>ACPI: ASF! 7F6F3000, 00A6 (r32 INTEL  D945GCR        31 MSFT  1000013)
>ACPI: HPET 7F6F2000, 0038 (r1 INTEL  D945GCR        31 MSFT  1000013)
>ACPI: SSDT 7F6F1000, 01BC (r1 INTEL     CpuPm       31 MSFT  1000013)
>ACPI: SSDT 7F6F0000, 0175 (r1 INTEL   Cpu0Ist       31 MSFT  1000013)
>ACPI: SSDT 7F6EF000, 0175 (r1 INTEL   Cpu1Ist       31 MSFT  1000013)
>ACPI: SSDT 7F6EE000, 0175 (r1 INTEL   Cpu2Ist       31 MSFT  1000013)
>ACPI: SSDT 7F6ED000, 0175 (r1 INTEL   Cpu3Ist       31 MSFT  1000013)
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:6 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:6 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:7ff80000)
>swsusp: Registered nosave memory region: 000000000008f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
>swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
>Built 1 zonelists in Zone order.  Total pages: 517906
>Kernel command line: ro root=LABEL=/ rhgb quiet
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07a9000 soft=c0789000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2992.617 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2061276k/2087936k available (2187k kernel code, 24668k reserved, 1118k data, 280k init, 1169804k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0740000 - 0xc0786000   ( 280 kB)
>      .data : 0xc0622d15 - 0xc073a544   (1118 kB)
>      .text : 0xc0400000 - 0xc0622d15   (2187 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 5989.41 BogoMIPS (lpj=2994707)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e49d 00000000 00000001 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 0000b180 0000e49d 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU0: Thermal monitoring enabled
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>CPU0: Intel(R) Pentium(R) D CPU 3.00GHz stepping 05
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07aa000 soft=c078a000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5985.10 BogoMIPS (lpj=2992551)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e49d 00000000 00000001 00000000
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 0000b180 0000e49d 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU1: Thermal monitoring enabled
>CPU1: Intel(R) Pentium(R) D CPU 3.00GHz stepping 05
>Total of 2 processors activated (11974.51 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=1552 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 12:45:03  Date: 04/01/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0500-053f claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Time: tsc clocksource has been installed.
>pnp: 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved
>pnp: 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
>pnp: 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
>pnp: 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
>pnp: 00:06: ioport range 0x500-0x53f has been reserved
>pnp: 00:06: ioport range 0x400-0x47f has been reserved
>pnp: 00:06: ioport range 0x680-0x6ff has been reserved
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.2
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.3
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: 1000-1fff
>  MEM window: 90000000-900fffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3005k freed
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1207053902.478:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 433CDEB37FB53040
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>PCI: Firmware left 0000:04:08.0 e100 interrupts enabled, disabling
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>Allocate Port Service[0000:00:1c.3:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not present [20070126]
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected an Intel 945G Chipset.
>agpgart: Detected 7932K stolen memory.
>agpgart: AGP aperture is 256M @ 0x80000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 4:568:783
>Freeing unused kernel memory: 280k freed
>Write protecting the kernel read-only data: 850k
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 19, io mem 0x901c4000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 19, io base 0x00002080
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 18, io base 0x00002060
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 1-1: new high speed USB device using ehci_hcd and address 2
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 17, io base 0x00002040
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 20, io base 0x00002020
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>input: ImPS/2 Generic Wheel Mouse as /class/input/input2
>usb 1-1: configuration #1 chosen from 1 choice
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000120b0 irq 14
>ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x000120b8 irq 15
>usb 1-3: new high speed USB device using ehci_hcd and address 4
>ata1.00: ATA-7: ST3250824A, 3.AAH, max UDMA/100
>ata1.00: 488397168 sectors, multi 16: LBA48 
>ata1.01: ATAPI: MAD DOG MD-16X3DVD9-8X, 1.F0, max UDMA/33
>usb 1-3: configuration #1 chosen from 1 choice
>hub 1-3:1.0: USB hub found
>hub 1-3:1.0: 4 ports detected
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/33
>ata2: port disabled. ignoring.
>scsi 0:0:0:0: Direct-Access     ATA      ST3250824A       3.AA PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 0:0:1:0: CD-ROM            MAD DOG  MD-16X3DVD9-8X   1.F0 PQ: 0 ANSI: 5
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0x000120c8 ctl 0x000120ee bmdma 0x000120a0 irq 18
>ata4: SATA max UDMA/133 cmd 0x000120c0 ctl 0x000120ea bmdma 0x000120a8 irq 18
>ata4.00: ATA-7: WDC WD2500JS-22NCB1, 10.02E02, max UDMA/133
>ata4.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata4.01: ATA-7: WDC WD2000JS-60NCB1, 10.02E02, max UDMA/100
>ata4.01: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata4.00: configured for UDMA/133
>ata4.01: configured for UDMA/100
>scsi 3:0:0:0: Direct-Access     ATA      WDC WD2500JS-22N 10.0 PQ: 0 ANSI: 5
>sd 3:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
>sd 3:0:0:0: [sdb] Write Protect is off
>sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
>sd 3:0:0:0: [sdb] Write Protect is off
>sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 sdb3 sdb4 < sdb5<6>usb 2-2: new full speed USB device using uhci_hcd and address 2
> sdb6 sdb7 >
>sd 3:0:0:0: [sdb] Attached SCSI disk
>scsi 3:0:1:0: Direct-Access     ATA      WDC WD2000JS-60N 10.0 PQ: 0 ANSI: 5
>sd 3:0:1:0: [sdc] 390721968 512-byte hardware sectors (200050 MB)
>sd 3:0:1:0: [sdc] Write Protect is off
>sd 3:0:1:0: [sdc] Mode Sense: 00 3a 00 00
>sd 3:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:1:0: [sdc] 390721968 512-byte hardware sectors (200050 MB)
>sd 3:0:1:0: [sdc] Write Protect is off
>sd 3:0:1:0: [sdc] Mode Sense: 00 3a 00 00
>sd 3:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1 sdc2 sdc3 < sdc5 sdc6 sdc7 >
>sd 3:0:1:0: [sdc] Attached SCSI disk
>usb 2-2: configuration #1 chosen from 1 choice
>usb 3-2: new full speed USB device using uhci_hcd and address 2
>usb 3-2: configuration #1 chosen from 1 choice
>hub 3-2:1.0: USB hub found
>hub 3-2:1.0: 7 ports detected
>usb 1-3.4: new high speed USB device using ehci_hcd and address 6
>usb 1-3.4: configuration #1 chosen from 1 choice
>usb 3-2.4: new full speed USB device using uhci_hcd and address 3
>usb 3-2.4: not running at top speed; connect to a high speed hub
>usb 3-2.4: configuration #2 chosen from 1 choice
>Initializing USB Mass Storage driver...
>scsi4 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 6
>usb-storage: waiting for device to settle before scanning
>scsi5 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device scan complete
>scsi 4:0:0:0: CD-ROM            LITE-ON  DVDRW SOHW-1673S JS01 PQ: 0 ANSI: 0
>usb-storage: device scan complete
>scsi 5:0:0:0: CD-ROM            CD-RW    CXR-2X40         7SG1 PQ: 0 ANSI: 0
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: sda3: orphan cleanup on readonly fs
>ext3_orphan_cleanup: deleting unreferenced inode 15680551
>ext3_orphan_cleanup: deleting unreferenced inode 15680550
>ext3_orphan_cleanup: deleting unreferenced inode 15680549
>ext3_orphan_cleanup: deleting unreferenced inode 15680548
>ext3_orphan_cleanup: deleting unreferenced inode 15680547
>EXT3-fs: sda3: 5 orphan inodes deleted
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1207053917.841:2): selinux=0 auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 0:0:1:0: Attached scsi generic sg1 type 5
>sd 3:0:0:0: Attached scsi generic sg2 type 0
>sd 3:0:1:0: Attached scsi generic sg3 type 0
>scsi 4:0:0:0: Attached scsi generic sg4 type 5
>scsi 5:0:0:0: Attached scsi generic sg5 type 5
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:1:0: Attached scsi CD-ROM sr0
>sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>sr 4:0:0:0: Attached scsi CD-ROM sr1
>intel_rng: FWH not detected
>sr2: scsi3-mmc drive: 115x/40x writer cd/rw xa/form2 cdda pop-up
>sr 5:0:0:0: Attached scsi CD-ROM sr2
>input: Power Button (FF) as /class/input/input3
>input: PC Speaker as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Sleep Button (CM) as /class/input/input5
>ACPI: Sleep Button (CM) [SLPB]
>iTCO_vendor_support: vendor-support=0
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 18
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>parport_pc 00:07: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
>e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
>e100: Copyright(c) 1999-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:04:08.0[A] -> GSI 20 (level, low) -> IRQ 21
>usb 1-1: reset high speed USB device using ehci_hcd and address 2
>e100: eth0: e100_probe: addr 0x90000000, irq 21, MAC addr 00:19:D1:F9:E0:E6
>parport0: Printer, EPSON Stylus C88
>phy0: Selected rate control algorithm 'pid'
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
>zd1211rw 1-1:1.0: phy0
>usbcore: registered new interface driver zd1211rw
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 20
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda3, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2160732k swap on /dev/sdb3.  Priority:-1 extents:1 across:2160732k
>Adding 4192924k swap on /dev/sda5.  Priority:-2 extents:1 across:4192924k

Actions: View

Attachments on bug 440101: 299977 | 299993 | 299996 | 300160 | 300161 | 300162 | 300163 | 300173